Polyphase generators produce simultaneous multiple sinusoidal voltages that are separated by certain...

Polyphase generators produce simultaneous multiple sinusoidal voltages that are separated by certain constant: A. Phase -angles B. Frequency C. Voltage D. Current
by

1 Answer

Answer :

Polyphase generators produce simultaneous multiple sinusoidal voltages that are separated by certain constant: Phase -angles

by

Related questions

Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.

Description : Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.

Last Answer : Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.

One important difference between wye-connected and delta-connected generators is that delta connections have ____________. A. line voltages equal to the vector sum of the phase voltages B. phase voltages 90° out of sync C. line current equal to the phase current D. line voltage equal to the phase voltage

Description : One important difference between wye-connected and delta-connected generators is that delta connections have ____________. A. line voltages equal to the vector sum of the phase voltages B. phase voltages 90° ... C. line current equal to the phase current D. line voltage equal to the phase voltage

Last Answer : Answer: D

AC and DC generators are similar in that they _____________. A. both generate alternating voltages B. both rectify the voltage before delivery C. are constructed at the same physical size for the same kilowatt rating D. both supply three-phase power

Description : AC and DC generators are similar in that they _____________. A. both generate alternating voltages B. both rectify the voltage before delivery C. are constructed at the same physical size for the same kilowatt rating D. both supply three-phase power

Last Answer : Answer: A

In a certain three -wire Y -connected generator, the phase voltages are 2 kV. The magnitudes of the line...

Description : In a certain three -wire Y -connected generator, the phase voltages are 2 kV. The magnitudes of the line voltages will be: A. 2,000 V B. 6,000 V C. 666 V D. 3,464 V

Last Answer : In a certain three -wire Y -connected generator, the phase voltages are 2 kV. The magnitudes of the line voltages will be: 3,464 V

What is the need of polarity marking in polyphase AC circuits?

Description : What is the need of polarity marking in polyphase AC circuits?

Last Answer : Need of Polarity Marking in Polyphase AC Circuits: i) Polarity marking of terminals provides reference polarity for better understanding of system, even if the polarity of ac voltage changes ... of current transformers in relay protection circuit and getting desired performance is very difficult.

The simultaneous processing of two or more programs by multiple processors is calleda. Multi-processing b.Multi-tasking c. Multi-sharing d. All of the these

Description : The simultaneous processing of two or more programs by multiple processors is calleda. Multi-processing b.Multi-tasking c. Multi-sharing d. All of the these

Last Answer : a. Multi-processing

The simultaneous processing of two or more programs by multiple processors is calleda. Multi-processing b.Multi-tasking c. Multi-sharing d. All of the these

Description : The simultaneous processing of two or more programs by multiple processors is calleda. Multi-processing b.Multi-tasking c. Multi-sharing d. All of the these

Last Answer : a. Multi-processing

________is the set of techniques that allows the simultaneous transmission of multiple signalsacrossa single data link. A) Demodulating B) Multiplexing C) Compressing D) None of the above

Description : ________is the set of techniques that allows the simultaneous transmission of multiple signalsacrossa single data link. A) Demodulating B) Multiplexing C) Compressing D) None of the above

Last Answer : Multiplexing

The simultaneous processing of two or more programs by multiple processor is a: a) Multi - Tasking b) Multi - Programming c) Multi - Processing d) None of These

Description : The simultaneous processing of two or more programs by multiple processor is a: a) Multi - Tasking b) Multi - Programming c) Multi - Processing d) None of These

Last Answer : c) Multi - Processing

The simultaneous processing of two or more programs by multiple processors is: a) Multi programming b) Multi tasking c) Time - sharing d) Multi processing e) None of The Above

Description : The simultaneous processing of two or more programs by multiple processors is: a) Multi programming b) Multi tasking c) Time - sharing d) Multi processing e) None of The Above

Last Answer : d) Multi processing

The simultaneous processing of two or more programs by multiple processors is a) multiprogramming b) multitasking c) time-sharing d) multiprocessing e) None of these

Description : The simultaneous processing of two or more programs by multiple processors is a) multiprogramming b) multitasking c) time-sharing d) multiprocessing e) None of these

Last Answer : a) multiprogramming

The simultaneous processing of two or more programs by multiple processors is ..... 1) multiprogramming 2) multitasking 3) time-sharing 4) multiprocessing

Description : The simultaneous processing of two or more programs by multiple processors is ..... 1) multiprogramming 2) multitasking 3) time-sharing 4) multiprocessing

Last Answer : 4) multiprocessing

At high discharge rates, nickel-cadmium storage batteries are superior to lead-acid batteries because they __________. A. require fewer cells for the same voltage and less mounting space B. are able to produce higher voltages and do not have to be charged as often C. can be charged and discharged many times without much damage D. have no individual cells to replace at the end of useful life

Description : At high discharge rates, nickel-cadmium storage batteries are superior to lead-acid batteries because they __________. A. require fewer cells for the same voltage and less mounting space B. are able to ... times without much damage D. have no individual cells to replace at the end of useful life

Last Answer : Answer: C

The primary function of an electric motor is to ___________. A. develop torque B. generate high voltages C. produce a magnetic field D. generate high electrical resistance

Description : The primary function of an electric motor is to ___________. A. develop torque B. generate high voltages C. produce a magnetic field D. generate high electrical resistance

Last Answer : Answer: A

If the synchronous speed of a 12 pole, polyphase, induction motor operating at 60 Hz were 600 RPM, how many poles will be required in a similar motor operating at the same frequency but having a synchronous speed of 900 RPM? A. 4 B. 6 C. 8 D. 18

Description : If the synchronous speed of a 12 pole, polyphase, induction motor operating at 60 Hz were 600 RPM, how many poles will be required in a similar motor operating at the same frequency but having a synchronous speed of 900 RPM? A. 4 B. 6 C. 8 D. 18

Last Answer : Answer: C

In the illustrated device, the part labeled '1A' _________. EL-0001 A. are start and run windings for a single phase shaded pole induction motor B. is the stator for a polyphase induction motor C. is the armature for a squirrel cage rotor motor D. are direct current shunt field windings for a universal motor

Description : In the illustrated device, the part labeled '1A' _________. EL-0001 A. are start and run windings for a single phase shaded pole induction motor B. is the stator for a polyphase induction ... armature for a squirrel cage rotor motor D. are direct current shunt field windings for a universal motor

Last Answer : Answer: B

In the illustration, the assembly labeled 2 is a ________. EL-0001 A. wound rotor and shaft for a single phase induction motor B. conduction rotor and shaft for a polyphase induction motor C. squirrel cage rotor and shaft for a polyphase motor D. squirrel cage rotor for a single phase induction motor

Description : In the illustration, the assembly labeled 2 is a ________. EL-0001 A. wound rotor and shaft for a single phase induction motor B. conduction rotor and shaft for a polyphase induction motor C. ... cage rotor and shaft for a polyphase motor D. squirrel cage rotor for a single phase induction motor

Last Answer : Answer: C

Which of the following types of motors is often designed for use in correcting power factor? A. Polyphase B. Wound-rotor C. Induction D. Synchronous

Description : Which of the following types of motors is often designed for use in correcting power factor? A. Polyphase B. Wound-rotor C. Induction D. Synchronous

Last Answer : Answer: D

Autotransformer starters or compensators are sometimes used with polyphase induction motors to _____________. A. reduce the voltage applied to the motor during the starting period B. increase the voltage for 'across-the-line starting' C. provide a backup means of voltage regulation for emergency starting D. allow the voltage to be either stepped up or down, depending on the application, to ensure full torque

Description : Autotransformer starters or compensators are sometimes used with polyphase induction motors to _____________. A. reduce the voltage applied to the motor during the starting period B. increase the voltage for ' ... to be either stepped up or down, depending on the application, to ensure full torque

Last Answer : Answer: A

In general, polyphase induction motors can be started on full line voltage by means of ______________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Description : In general, polyphase induction motors can be started on full line voltage by means of ______________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Last Answer : Answer: C

Which of the following statements is true concerning a polyphase synchronous propulsion motor? A. The motor is started as an induction motor. B. Resistance is gradually added to the rotor circuit. C. The starting current is held below the rated current. D. The field winding is energized for starting purposes only.

Description : Which of the following statements is true concerning a polyphase synchronous propulsion motor? A. The motor is started as an induction motor. B. Resistance is gradually added to the rotor circuit. C. ... is held below the rated current. D. The field winding is energized for starting purposes only.

Last Answer : Answer: A

Low horsepower, polyphase, induction motors can be started with full voltage by means of _____________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Description : Low horsepower, polyphase, induction motors can be started with full voltage by means of _____________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Last Answer : Answer: C

Define for polyphase circuit (i) Balanced load (ii) Unbalanced load. Draw one example circuit for each type of load.

Description : Define for polyphase circuit (i) Balanced load (ii) Unbalanced load. Draw one example circuit for each type of load.

Last Answer : i) Balanced Load: Balanced three phase load is defined as star or delta connection of three equal impedances having equal real parts and equal imaginary parts.  Example circuit:  ii) ... satisfy the condition of balance, then it is called as unbalanced load.  Example circuit:

Define Amplitude and Phase of Sinusoidal quantity.

Description : Define Amplitude and Phase of Sinusoidal quantity.

Last Answer : Amplitudes are expressed either as instantaneous values or mostly as peak values.  Amplitude is the fluctuation or displacement of a wave from its mean value.  Phase is the position of a ... .  Phase an expression of relative displacement between or among waves having the same frequency . 

Draw sinusoidal waveform of 3 phase emf and indicate the phase sequence.

Description : Draw sinusoidal waveform of 3 phase emf and indicate the phase sequence.

Last Answer : Phase sequence is R-Y-B.

Explain how sinusoidal AC voltage is generated by using simple one loop generator.

Description : Explain how sinusoidal AC voltage is generated by using simple one loop generator.

Last Answer : An electric current produced by means of electrical machine is known as generator which converts mechanical energy into electrical energy. When conductor cuts the magnetic flux, emf induced in it. (Faraday' ... upon position of armature. The nature of emf is alternating as shown by the waveform. 

When the phase difference between two sinusoidal quantities is 90° they are said to be ______

Description : When the phase difference between two sinusoidal quantities is 90° they are said to be ______ A) Phase right angle B) Phase quadrature C) Phase sinuright D) None of these

Last Answer : When the phase difference between two sinusoidal quantities is 90° they are said to be Phase quadrature

In a two -channel oscilloscope operating in x -y mode, two in -phase 50 Hz sinusoidal waveforms of equal ...

Description : In a two -channel oscilloscope operating in x -y mode, two in -phase 50 Hz sinusoidal waveforms of equal amplitude are fed to the two channels. What will be the resultant pattern on the screen ? (a) An ellipse (b) A parabola (c) Straight line inclined at 45° with respect to x-axis (d) A circle

Last Answer : In a two -channel oscilloscope operating in x -y mode, two in -phase 50 Hz sinusoidal waveforms of equal amplitude are fed to the two channels. What will be the resultant pattern on the screen ? (a) An ellipse (b) A parabola (c) Straight line inclined at 45° with respect to x-axis (d) A circle

The r.m.s. value of a sinusoidal A.C. current is equal to its value at an angle of______degrees.

Description : The r.m.s. value of a sinusoidal A.C. current is equal to its value at an angle of______degrees.

Last Answer : 45

Multiple grounds have developed and were initialy indicated by the grounddetecting system as one ground. The FIRST step in locating the grounds is to _____________. A. examine the main bus bars for signs of overheating B. eliminate the individual circuits one by one until the ground detecting system no longer indicates any grounds C. change over generators D. check each circuit with a megohmmeter

Description : Multiple grounds have developed and were initialy indicated by the grounddetecting system as one ground. The FIRST step in locating the grounds is to _____________. A. examine the main bus bars ... no longer indicates any grounds C. change over generators D. check each circuit with a megohmmeter

Last Answer : Answer: B

Load flow studies involve solving simultaneous

Description : Load flow studies involve solving simultaneous  (1) linear algebraic equations. (3) linear differential equations. (2) non-linear algebraic equations. (4) non-linear differential equations.

Last Answer : Load flow studies involve solving simultaneous non-linear algebraic equations.

Generators at a power station produce electric power at voltage A. 45 kW B. 50 kW C. 60 kW D. 25 kW

Description : Generators at a power station produce electric power at voltage A. 45 kW B. 50 kW C. 60 kW D. 25 kW

Last Answer : 25 kW

Range-marker generators produce pulses based on what radar constant?

Description : Range-marker generators produce pulses based on what radar constant?

Last Answer : The radar mile (12.36 microseconds).

Ships’ generators produce 450-volt, three-phase, ac power; however, most equipment uses 117-volt, single-phase power What transformers and connections are used to convert 450- volt, threephase power to 117-volt, single-phase power?

Description : Ships’ generators produce 450-volt, three-phase, ac power; however, most equipment uses 117-volt, single-phase power What transformers and connections are used to convert 450- volt, threephase power to 117-volt, single-phase power?

Last Answer : A method of generating oscillations, a method of turning the oscillations on and off (keying), and an antenna to radiate the energy.

What example is Two populations that are separated by a mountain range can no longer interbreed to produce fertile offspring.?

Description : What example is Two populations that are separated by a mountain range can no longer interbreed to produce fertile offspring.?

Last Answer : What is the answer ?

Two infinitely long parallel conductors in vacuum any separated 1 metre between centers >then a current of 1 ampere flows the. uk each conductor, produce on each other a force of (a) 2 x 1(T2 N/m) (b) 2 x KT3 N/m (c) 2 x 10"5 N/m (d) 2x 1(T7 N/m)

Description : Two infinitely long parallel conductors in vacuum any separated 1 metre between centers >then a current of 1 ampere flows the. uk each conductor, produce on each other a force of (a) 2 x 1(T2 N/m) (b) 2 x KT3 N/m (c) 2 x 10"5 N/m (d) 2x 1(T7 N/m)

Last Answer : (d) 2x 1(T7 N/m)

Alternating voltages and currents are represented by straight line with an arrow to represent the

Description : Alternating voltages and currents are represented by straight line with an arrow to represent the magnitude and direction. This representation is called

Last Answer : Alternating voltages and currents are represented by straight line with an arrow to represent the magnitude and direction. This representation is called Phasor quantity

A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :

Description : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :  (A) less than 66 kV (B) lie between 66 kV and 110 kV (C) more than 165 kV (D) lie between 110 kV and 165 kV

Last Answer : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are : lie between 66 kV and 110 kV

Electrostatic voltmeters are particularly suitable for measuring high voltages because the construction...

Description : Electrostatic voltmeters are particularly suitable for measuring high voltages because the construction is simplified due to

Last Answer : Electrostatic voltmeters are particularly suitable for measuring high voltages because the construction is simplified due to Large electrostatic forces.

The sinusoidal wave `y(x,t) = ym sin(kx-omegat)` is incident on the fixed end of a string at `x = L`. The reflected wave is given by :-

Description : The sinusoidal wave `y(x,t) = ym sin(kx-omegat)` is incident on the fixed end of a string at `x = L`. The reflected wave is given by :-

Last Answer : The sinusoidal wave `y(x,t) = ym sin(kx-omegat)` is incident on the fixed end of a string at `x = L` ... (kx+omegat-kL)` D. `y_(m)sin(kx+omegat-2kL)`

What are the features for Human Hepatic Sinusoidal Endothelial Cells?

Description : What are the features for Human Hepatic Sinusoidal Endothelial Cells?

Last Answer : HHSEC are isolated from human liver. HHSEC are cryopreserved immediately after purification and delivered frozen. Each vial contains >5 x 10^5 cells in 1 ml volume. HHSEC are characterized by immunofluorescent ... ). HHSEC are negative for HIV-1, HBV, HCV, mycoplasma, bacteria, yeast and fungi.

Current flowing in only one direction is called ___________. A. alternating current B. omnidirectional current C. direct current D. sinusoidal current

Description : Current flowing in only one direction is called ___________. A. alternating current B. omnidirectional current C. direct current D. sinusoidal current

Last Answer : Answer: C

Which of the wave shapes shown in the illustration is termed a sinusoidal wave? EL-0088 A. A B. B C. C D. D

Description : Which of the wave shapes shown in the illustration is termed a sinusoidal wave? EL-0088 A. A B. B C. C D. D

Last Answer : Answer: C

Ammeters and voltmeters used in sinusoidal AC power systems indicate which of the following values of the waveforms measured? A. Peak value B. Root-mean-square value C. Average value D. Maximum value

Description : Ammeters and voltmeters used in sinusoidal AC power systems indicate which of the following values of the waveforms measured? A. Peak value B. Root-mean-square value C. Average value D. Maximum value

Last Answer : Answer: B

The sinusoidal carrier is pulsed so that one of the binary states is represented by a carrier while the other is represented by its absence. A. FSK B. ASK C. PSK D. QAM

Description : The sinusoidal carrier is pulsed so that one of the binary states is represented by a carrier while the other is represented by its absence. A. FSK B. ASK C. PSK D. QAM

Last Answer : B. ASK

If the mean stress value for a sinusoidal stress function is zero, then this type of stress falls in which category? a) Fluctuating Stresses b) Alternating Stresses c) Repeated Stresses d) Reversed Stresses

Description : If the mean stress value for a sinusoidal stress function is zero, then this type of stress falls in which category? a) Fluctuating Stresses b) Alternating Stresses c) Repeated Stresses d) Reversed Stresses

Last Answer : d) Reversed Stresses

Average power dissipated in resistor if sinusoidal p.d of peak value 25 V is connected across a 20 Ω resistor isA. 15.6 WB. 15 WC. 16 WD. 17 W

Description : Average power dissipated in resistor if sinusoidal p.d of peak value 25 V is connected across a 20 Ω resistor is A. 15.6 W B. 15 W C. 16 W D. 17 W

Last Answer : 15.6 W

The first critical speed of an automobile running on a sinusoidal road is calculated by (modeling it as a single degree of freedom system) A Resonance B Approximation C Superposition D Rayleigh quotient

Description : The first critical speed of an automobile running on a sinusoidal road is calculated by (modeling it as a single degree of freedom system) A Resonance B Approximation C Superposition D Rayleigh quotient

Last Answer : A Resonance

The first critical speed of an automobile running on a sinusoidal road is calculated by (modeling it as a single degree of freedom system) a) Resonance b) Approximation c) Superposition d) Rayleigh quotient

Description : The first critical speed of an automobile running on a sinusoidal road is calculated by (modeling it as a single degree of freedom system) a) Resonance b) Approximation c) Superposition d) Rayleigh quotient

Last Answer : a) Resonance

Q-7 during welding process, why sinusoidal wave form is converted in to the square wave form?

Description : Q-7 during welding process, why sinusoidal wave form is converted in to the square wave form?

Last Answer : In sinusoidal wave, we get maximum energy at one point only. So for the more amount of maximum energy we can get by converting the sinusoidal wave form in to the square wave form, and more penetration and deposition rate is achieved due to maximum energy.