Which material is having highest resistivity in ohm-metre at 20oC X10-8?

Which material is having highest resistivity in ohm-metre at 20oC X10-8? A. Mercury B. Iron C. Tungsten D. Silver

by

1 Answer

Answer :

Mercury material is having highest resistivity in ohm-metre at 20oC X10-8

by

Related questions

The resistivity of a material with resistance 200 ohm, length 10m and area twice that of the length is a) 200 b) 300 c) 400 d) 500

Description : The resistivity of a material with resistance 200 ohm, length 10m and area twice that of the length is a) 200 b) 300 c) 400 d) 500

Last Answer : c) 400

Materials having resistivity ranging from 1 to 100 ohm. cm is termed as (A) Conductor (B) Insulator (C) Semi-conductor (D) None of these

Description : Materials having resistivity ranging from 1 to 100 ohm. cm is termed as (A) Conductor (B) Insulator (C) Semi-conductor (D) None of these

Last Answer : (C) Semi-conductor

SI unit of resistivity is a. ohm b. Ohm×m c. Ohm×m-1 d. Ohm×m2

Description : SI unit of resistivity is a. ohm b. Ohm×m c. Ohm×m-1 d. Ohm×m2

Last Answer : c. Ohm×m-1

Define – resistance and resistivity. State relationship between them. Give one material having high resistivity.

Description : Define – resistance and resistivity. State relationship between them. Give one material having high resistivity.

Last Answer : Ans: Resistance and Resistivity: Resistance: It is the opposition offered by the conductor to the flow of current. Resistivity: It is property of the substance by virtue of which it opposes to ... high resistivity: Mica, Nichrom, Rubber, Glass, Plastic Porcelain, Dry wood, Insulating material etc.

What is Pre Heating Temperature of rail ends in AT Welding? (i) 300 ± 20oC (ii) 400 ± 20oC (iii) 500 ± 20oC (iv) 600 ± 20oC *

Description : What is Pre Heating Temperature of rail ends in AT Welding? (i) 300 ± 20oC (ii) 400 ± 20oC (iii) 500 ± 20oC (iv) 600 ± 20oC *

Last Answer : (iv) 600 ± 20oC *

Calculate the velocity of a wave with frequency 2 x10 9 rad/s and phase constant of 4 x 10 8 units. a) 0.5 b) 5 c) 0.2 d) 2

Description : Calculate the velocity of a wave with frequency 2 x10 9 rad/s and phase constant of 4 x 10 8 units. a) 0.5 b) 5 c) 0.2 d) 2

Last Answer : b) 5

Find the resistivity of a material having resistance 20kohm, area 2 units and length of 12m. a) 6666.6 b) 3333.3 c) 1200 d) 2000

Description : Find the resistivity of a material having resistance 20kohm, area 2 units and length of 12m. a) 6666.6 b) 3333.3 c) 1200 d) 2000

Last Answer : b) 3333.3

For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is 3 × 10-3 cm3 /sec, the discharge per metre length of dam, is (A) 12 × 10-5 m3 /sec (B) 24 × 10-3 m3 /sec (C) 6 × 10-5 m3 /sec (D) 24 × 10-5 m3 /sec

Description : For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is ... 24 10-3 m3 /sec (C) 6 10-5 m3 /sec (D) 24 10-5 m3 /sec

Last Answer : (D) 24 × 10-5 m3 /sec

Which material has low resistivity?

Description : Which material has low resistivity?

Last Answer : Silver have lowest resistivity then copper then aluminium tungsten then iron...

Given that resistivity of copper is `1.68xx10^(-8) Omega`m. Calculate the amount of copper required to draw a wire 10 km long having resistance of `10

Description : Given that resistivity of copper is `1.68xx10^(-8) Omega`m. Calculate the amount of copper required to draw a wire 10 km long having resistance of `10

Last Answer : Given that resistivity of copper is `1.68xx10^(-8) Omega`m. Calculate the amount of copper required to draw a ... copper is `8.9xx10^(3) kg m^(-3)`.

A cube of material of side 1 cm has a resistance of 0.002 ohm between...

Description : A cube of material of side 1 cm has a resistance of 0.002 ohm between its opposite faces. If the same volume of the material has a length of 8 cm and a uniform cross-section, the resistance of this length will be 

Last Answer : A cube of material of side 1 cm has a resistance of 0.002 ohm between its opposite faces. If the same volume of the material has a length of 8 cm and a uniform cross-section, the resistance of this length will be 0.128 ohm.

Has anyone used a Sony Ericsson Xperia X10?

Description : Has anyone used a Sony Ericsson Xperia X10?

Last Answer : answer:I have an X10 I find it easy to use and since the new downloaded upgrade the hd video is fab and the multi screens are much better. The battery life is a bit rubbish if you use the internet ... questions that aren't too technical pm me and I will try to help oh and welcome to ask-public :)

X10 Home Automation fun without a computer?

Description : X10 Home Automation fun without a computer?

Last Answer : Yea, this is a longshot. I'm guessing most people have never heard of X10. All the X10 I've worked with used the PC as a server. You could always grab a crappy old pc at goodwill or something ... have wanted but it's a resonable solution. You don't need a powerful computer to act as your server.

has anyone use the iphone with x10 activehome program?

Description : has anyone use the iphone with x10 activehome program?

Last Answer : http://discussions.apple.com/index.jspa

Does anyone know if X10 and Control 4 Are Compatible?

Description : Does anyone know if X10 and Control 4 Are Compatible?

Last Answer : answer: One of the limitations of the X10 protocol is the speed at which signals are sent. In general only one part of the signal is sent every 16 milliseconds. That sounds fast but can lead to ... for iPhone/iPod Touch anyway, so you'd be better off using the remotes that come with the system.

The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation? a.N010 GO2 X10 Y10 X5 Y5 R5 b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Description : The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the ... b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Last Answer : a.N010 GO2 X10 Y10 X5 Y5 R5

How do you write 2.92 x10 negative 1 exponent in standard form?

Description : How do you write 2.92 x10 negative 1 exponent in standard form?

Last Answer : The -1 exponent is stating that the decimal needs to be moved one place to the left (essentially making the number smaller than how it appears).The standard form would be shown as: 0.292If the exponent were to have been a positive 1, the decimal would move one place right, instead of left.

Is 6.97 x10(9)L neutrophils count very high and does it indicate anything?

Description : Is 6.97 x10(9)L neutrophils count very high and does it indicate anything?

Last Answer : Feel Free to Answer

What are some features of the Sony Ericsson Xperia x10?

Description : What are some features of the Sony Ericsson Xperia x10?

Last Answer : There are many good qualities about the Sony Ericsson Xperia x10. It runs on the Android platform and allows you to capture video in HD quality. It also has a built in GPS system.

Calculate the energy of the photon of infrared light energy at 1.55µm A. 1.28x10-19 J B. 1.6 x10-19 J C. 1.22 x10-16 J D. 1.9 x10-14 J

Description : Calculate the energy of the photon of infrared light energy at 1.55µm A. 1.28x10-19 J B. 1.6 x10-19 J C. 1.22 x10-16 J D. 1.9 x10-14 J

Last Answer : A. 1.28x10-19 J

A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 x10^6 kJ  D. 2 x10^6 kJ Formula: fromthe steamtable vƒ = 0.001043 m^3 / kg vg = 1.6940 m^3 / kg u ƒ= 417.3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Description : A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 ... 3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Last Answer : 2 x10^6 kJ

A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The extension in the rod was 1 mm only. If Esteel = 2 × 106 kg/cm2 , the side of the rod, is (A) 1 cm (B) 1.5 cm (C) 2 cm (D) 2.5 cm

Description : A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The  extension in the rod was 1 mm only. If Esteel = 2 × 106  kg/cm2 , the side of the rod, is  (A) 1 cm  (B) 1.5 cm  (C) 2 cm  (D) 2.5 cm 

Last Answer : (C) 2 cm 

Problem on resistance and resistivity 8

Description : Problem on resistance and resistivity 8

Last Answer : Problem on resistance and resistivity 8

The material used for a fuse wire should have (a) high resistivity (b) high ductility (c) high melting point (d) low melting point

Description : The material used for a fuse wire should have (a) high resistivity (b) high ductility (c) high melting point (d) low melting point

Last Answer : Ans:(d)

What is specific resistance or resistivity of the material?

Description : What is specific resistance or resistivity of the material?

Last Answer : Specific resistance of the material is the resistance of a piece of unit length and unit cross-section (unit cube of that material). That is the resistance between the opposite faces of unit cube of the material. ... face of that material. The unit of specific resistance is Ω/cm3 , Ω/inch3 , Ω/m3 . 

Calculate the conduction current density when the resistivity of a material with an electric field of 5 units is 4.5 units. a) 22.5 b) 4.5/5 c) 5/4.5 d) 9.5

Description : Calculate the conduction current density when the resistivity of a material with an electric field of 5 units is 4.5 units. a) 22.5 b) 4.5/5 c) 5/4.5 d) 9.5

Last Answer : c) 5/4.5

Calculate the conduction density of a material with resistivity of 0.02 units and electric intensity of 12 units. a) 300 b) 600 c) 50 d) 120

Description : Calculate the conduction density of a material with resistivity of 0.02 units and electric intensity of 12 units. a) 300 b) 600 c) 50 d) 120

Last Answer : b) 600

A material with zero resistivity is said to have a) Zero conductance b) Infinite conductance c) Zero resistance d) Infinite resistance

Description : A material with zero resistivity is said to have a) Zero conductance b) Infinite conductance c) Zero resistance d) Infinite resistance

Last Answer : c) Zero resistance

Find the current density of a material with resistivity 20 units and electric field intensity 2000 units. a) 400 b) 300 c) 200 d) 100

Description : Find the current density of a material with resistivity 20 units and electric field intensity 2000 units. a) 400 b) 300 c) 200 d) 100

Last Answer : d) 100

Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Description : Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Last Answer : (A) Is an electrical insulating material

The insulating material should have (a) low permittivity (b) high resistivity (c) high dielectric strength (d) all of the above

Description : The insulating material should have (a) low permittivity (b) high resistivity (c) high dielectric strength (d) all of the above

Last Answer : (d) all of the above

Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Description : Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Last Answer : (A) Nichrome

The most malleable, ductile low resistivity material is (A) Copper. (B) Aluminium. (C) Silver. (D) Iron.

Description : The most malleable, ductile low resistivity material is (A) Copper. (B) Aluminium. (C) Silver. (D) Iron.

Last Answer : (C) Silver.

The material with lowest resistivity is (A) constantan. (B) silver. (C) manganin. (D) nichrome.

Description : The material with lowest resistivity is (A) constantan. (B) silver. (C) manganin. (D) nichrome.

Last Answer : (B) silver.

If resistance is 8 Ohm and current is 16 ampere then what will be the voltage and power?

Description : If resistance is 8 Ohm and current is 16 ampere then what will be the voltage and power?

Last Answer : 128 volts ,2048 watts

A rheostat has 100 turns of a wire of radius 0.4 mm having resistivity `4.2xx10^(-7) Omega`m. The diameter of each turn is 3 cm. What is the maximum v

Description : A rheostat has 100 turns of a wire of radius 0.4 mm having resistivity `4.2xx10^(-7) Omega`m. The diameter of each turn is 3 cm. What is the maximum v

Last Answer : A rheostat has 100 turns of a wire of radius 0.4 mm having resistivity `4.2xx10^(-7) ... the maximum value of resistance that it can introduce ?

When a sample of germanium and silicon having same impurity density are kept at room temperature then Resistivity of silicon will be higher than that of germanium, Why?

Description : When a sample of germanium and silicon having same impurity density are kept at room temperature then Resistivity of silicon will be higher than that of germanium, Why?

Last Answer : Ans-The answer is simple. Consider the PN diode for Ge 0.3eV is the breakdown voltage and in the case of Si its 0.7eV since the impurities are added in the same amount the bond due to the other atoms of the Si makes it resistive compared to the Ge.. thats all!

Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Description : Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Last Answer : (A) 3.6 W.D.V.ρ

The effective skin resistance of a material with conductivity 120 and skin depth of 2μm is a) 4.16 kilo ohm b) 4.16 mega ohm c) 41.6 kilo ohm d) 41.6 mega ohm

Description : The effective skin resistance of a material with conductivity 120 and skin depth of 2μm is a) 4.16 kilo ohm b) 4.16 mega ohm c) 41.6 kilo ohm d) 41.6 mega ohm

Last Answer : a) 4.16 kilo ohm

A bar L metre long and having its area of cross-section A, is subjected to a gradually applied tensile load W. The strain energy stored in the bar is (A) WL/2AE (B) WL/AE (C) W²L/AE (D) W²L/2AE

Description : A bar L metre long and having its area of cross-section A, is subjected to a gradually applied tensile  load W. The strain energy stored in the bar is  (A) WL/2AE (B) WL/AE (C) W²L/AE (D) W²L/2AE

Last Answer : (D) W²L/2AE

In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs) (A) 50" n(B) 30" n(C) 60" n (D) None of these

Description : In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per ... legs) (A) 50" n (B) 30" n (C) 60" n (D) None of these

Last Answer : (A) 50" n

Define resistivity. State its unit.

Description : Define resistivity. State its unit.

Last Answer : Resistivity can be defined as the resistance of a conducting material per unit length with unit area of cross section. Its unit is ohm/meter

Problems on resistance and resistivity

Description : Problems on resistance and resistivity

Last Answer : Problem on resistance and resistivity 1 : https://youtu.be/OqavD7OlZUs Problem on resistance and resistivity 2 : https://youtu.be/0eo8VO8cpwk Problem on resistance and resistivity 3 : https:// ... https://youtu.be/3neLRCTz0RQ Problem on resistance and resistivity 13 : https://youtu.be/vBCkvPOiztY

Problem on resistance and resistivity 13

Description : Problem on resistance and resistivity 13

Last Answer : Problem on resistance and resistivity 13

Problem on resistance and resistivity 12

Description : Problem on resistance and resistivity 12

Last Answer : Problem on resistance and resistivity 12

Problem on resistance and resistivity 11

Description : Problem on resistance and resistivity 11

Last Answer : Problem on resistance and resistivity 11

Problem on resistance and resistivity 10

Description : Problem on resistance and resistivity 10

Last Answer : Problem on resistance and resistivity 10

Problem on resistance and resistivity 9

Description : Problem on resistance and resistivity 9

Last Answer : Problem on resistance and resistivity 9

Problem on resistance and resistivity 7

Description : Problem on resistance and resistivity 7

Last Answer : Problem on resistance and resistivity 7

Problem on resistance and resistivity 6

Description : Problem on resistance and resistivity 6

Last Answer : Problem on resistance and resistivity 6