Electrical breaker box is buzzing-why??

Electrical breaker box is buzzing-why??
by

1 Answer

Answer :

No! Do not upgrade the breaker. The wire must also be upgraded if you do. Try plugging it in a different room. Is the problem still there?
by

Related questions

A circuit breaker is designed to protect an electrical circuit from damage caused by :

Description : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

Last Answer : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

After a black out the emergency generator comes on; On restoring the main supply we are closing the circuit breaker of the main generator without bothering about synchronizing. How is this possible?

Description : After a black out the emergency generator comes on; On restoring the main supply we are closing the circuit breaker of the main generator without bothering about synchronizing. How is this possible?

Last Answer : There is a power link connection breaker between the main generator and the emergency generator. During black out, this breaker trips. The emergency generator starts and its breaker closes and feeds only ... , there is no paralleling between main and emergency generator. Ask E/O for more details.

Can you help me solve my electrical mystery?

Description : Can you help me solve my electrical mystery?

Last Answer : Any signs of animal life? They can get in the walls and chew on the wires. Or is it the entire area served by that breaker? The breaker could be bad. It happens with anything mechanical.

Air conditioning will not turn on, is it electrical?

Description : Air conditioning will not turn on, is it electrical?

Last Answer : Pull the Thermostat off the wall and see if it is connected correctly to the AC switch. There should be no dangling wires, and the post labeled for the AC should have an attached wire.

Have you ever taken a shower or bath during an electrical storm?

Description : Have you ever taken a shower or bath during an electrical storm?

Last Answer : I’ve heard this rumor, and I too question it’s validity. I mean, if electricity can’t travel up a stream of urine (See mythbusters) I’m pretty sure it couldn’t travel through a shower stream. Perhaps through the drain? In either case, I’ve taken a shower in a storm before, and.. well, you see?

Electrical Wiring Who Say ?

Last Answer : Wire Through In load ( e.g. fan , lamp ) Etc. ) electric Power Supply To do Ordinary To the system Electric Waring Says. General In a sense Load Electric Power Supply To do For Of wires Ordinary In the system Being Electric Waring.

What are the safety precautions when working on electrical equipments?

Description : What are the safety precautions when working on electrical equipments?

Last Answer : Switch off power, wear proper protective clothing, safety shoes, Notice board : Do not switch on - Men at work, stand on rubber mat, remove metal rings, watch bracelets, use proper insulated tools, ... work permit. In case of electrical shock, give proper first aid, check heart beat and pulse.

What limits the electrical load?

Description : What limits the electrical load?

Last Answer : The available power is fixed and the voltage is fixed, so the setting of the breaker or fuse is the normal current of the load. If the load exceeds the rated current, then the breaker or fuse will operate and limit the load.

Devices which convert various physical quantities into electrical voltage are known as (a) Control system (b) sensors (c) level sensors (d) LDR

Description : Devices which convert various physical quantities into electrical voltage are known as (a) Control system (b) sensors (c) level sensors (d) LDR

Last Answer : (b) sensors

Alternating current generator converts.......... energy into electrical energy? a. mechanical energy b. chemical energy c. solar energy d. potential energy

Description : Alternating current generator converts.......... energy into electrical energy? a. mechanical energy b. chemical energy c. solar energy d. potential energy

Last Answer : a. mechanical energy

Heat energy is converted into electrical energy a. solar cells b. thermocouples c. electric generators d. none

Description : Heat energy is converted into electrical energy a. solar cells b. thermocouples c. electric generators d. none

Last Answer : b. thermocouples

Electrical energy is converted to heat at the rate of a. IRt b. I 2R c. I 2Rt d. VIt

Description : Electrical energy is converted to heat at the rate of a. IRt b. I 2R c. I 2Rt d. VIt

Last Answer : b. I 2R

All electrical appliances are connected in parallel to each other between the main line and neutral wire to get a. same current b. same current and potential difference c. different current but same potential difference d. different current and potential differences

Description : All electrical appliances are connected in parallel to each other between the main line and neutral wire to get a. same current b. same current and potential difference c. different current but same potential difference d. different current and potential differences

Last Answer : c. different current but same potential difference

An immersion heater of 400 watts kept on for 5 hours will consume electrical power of a. 2KWh b. 20KWh c. 6KWh d. 12KWh

Description : An immersion heater of 400 watts kept on for 5 hours will consume electrical power of a. 2KWh b. 20KWh c. 6KWh d. 12KWh

Last Answer : a. 2KWh

Thermocouples convert a. heat energy into electrical energy b. heat energy into light energy c. heat energy into mechanical energy d. mechanical energy into heat energy

Description : Thermocouples convert a. heat energy into electrical energy b. heat energy into light energy c. heat energy into mechanical energy d. mechanical energy into heat energy

Last Answer : d. mechanical energy into heat energy

What are the test and measuring instrument required in an Electrical depots?

Description : What are the test and measuring instrument required in an Electrical depots?

Last Answer : Ans. Following are the test and measuring instruments required in an Electrical depots. a. Test lamp b. Line Tester c. Continuity tester d. Volt meter e. Ammeter f. Earth megger g. Megger h. Lux meter i. Power analyzer j. Infrared thermometer

How to replace the electrical wiring in the apartment?

Description : How to replace the electrical wiring in the apartment?

Last Answer : How to replace the electrical wiring in the apartment? In most cases, when renovating an apartment, a complete replacement of the electrical wiring is required, especially if the house was built in ... Upon completion of the finishing, the new electrical wiring in your apartment is ready for use.

Briefly explain how an electrical generator converts mechanical energy into electrical energy

Description : Briefly explain how an electrical generator converts mechanical energy into electrical energy.

Last Answer : Working principle of DC generator: * Working principle of DC generator is the principle of dynamically induced emf or electromagnetic induction. * According to this principle, when flux is cut by a conductor, an ... , the flux is cut by the armature winding and an emf is dynamically induced in it. 

Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties.

Description : Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties. 

Last Answer : Following are requirements of conductor:- i) High conductivity :  Material should have high conductivity, So that * cross section of conductor (size) reduces, * Copper losses reduces, * So Efficiency ... . Boiling point is 1820°C 9. Specific gravity is 2.7 10. High resistance to corrosion. 

State different types of electrical signal and draw all types of waveforms.

Description : State different types of electrical signal and draw all types of waveforms.

Last Answer : Types of electrical signals 1) Sine wave 2) Triangular wave 3) Square wave Waveforms

Electrical Measuring Instruments

Description : Electrical Measuring Instruments

Last Answer : Electrical Measuring Instruments

GATE 2020 syllabus electrical engineering

Description : GATE 2020 syllabus electrical engineering

Last Answer : EE: Electrical Engineering Section 1: Engineering Mathematics Linear Algebra: Matrix Algebra, Systems of linear equations, Eigenvalues, Eigenvectors. Calculus: Mean value theorems, Theorems of ... to dc converters, Single phase and three phase inverters, Sinusoidal pulse width modulation.

Electrical specifications with values for washing machine.

Description : Electrical specifications with values for washing machine. 

Last Answer : 1. Type: Top loading / Front loading type 2. Capacity range: 6kg to 15kg 3. Motor Used: Induction motor 4. Input voltage: 100V- 240V 5. Power: in 1200W / Output power 100–400W{can go upto 1000W) 6. Efficiency: Max efficiency 31% 7. Wattage: 2.100-2.400 W 8. Current: 13A 9. Frequency: 50hz

electrical specifications of microwave oven.

Description : electrical specifications of microwave oven.

Last Answer : Supply voltage: 220 volts,50 Hz. Single phase A.C. Power consumption: 1300 W approx.(power consumption vary as manufacturer from500W to 1500W) Microwave power: 700 w-850 W Microwave frequency: 2450 ... ) Timer: 60 min. - 90 min(timer can also varied) Control: Soft/one touch control

Name safety tools used in industry for electrical wiring.

Description : Name safety tools used in industry for electrical wiring.

Last Answer : Safety tools used in industry for electrical wiring : 1) Hand gloves 2) Goggles 3) Rubber mats 4) Fire extinguishers 5) Danger notice plates 6) Search lights 7) Safety shoes or Gumboots 8) Ear plugs ... belts 13) Safety mask 14) Fire buckets 15) First aid box 16) Insulating stick or discharge rod

Write example of each type (i) Primary transducer (ii) Active transducer (iii) Electrical transducer (iv) Digital transducer

Description : Write example of each type (i) Primary transducer (ii) Active transducer (iii) Electrical transducer (iv) Digital transducer

Last Answer : (i) Active transducer:-Thermocouple, piezoelectric, photovoltaic cell (ii) Primary transducer:- Bourdon tube, bellows, (iii) Electrical transducer.:- LVDT,RVDT, Hall effect, strain gauge, ... , optical pyrometer, radiation pyrometer (iv) Digital transducer:- Linear Encoder, digital taco generator

Define the term electrical noise. List types of noises.

Description : Define the term electrical noise. List types of noises.

Last Answer : Electrical Noise:- It can be defined as undesirable electrical signals, which distort or interfere with an original (or desired) signal.  Types of noises:- 

What are the main electrical equipment used in HPS ? State the function of each parts of it in brief.

Description : What are the main electrical equipment used in HPS ? State the function of each parts of it in brief. 

Last Answer : Following Main Electrical Equipment used in HPS & their function: 1. Alternator 2. Exciter 3. Transformer 4. Switchgear   Function :  1) Alternator:- Alternator is coupled to ... part from the healthy section. It contains circuit breaker, relays, switches and other control devices.  

State the importance of electrical power in day to day life.

Description : State the importance of electrical power in day to day life. 

Last Answer : Importance of electrical power in day to day life: 1. Electrical energy is the basic necessity for domestic (residency), commercial, industrial, agriculture, consumers , transport (Electric ... agriculture products. iv) Running motors, furnaces of various kinds in industry, running locomotives 

Define measurement and state the significance of electrical measurement system.

Description : Define measurement and state the significance of electrical measurement system.

Last Answer : Measurement: Measurement is essentially a process in which magnitude of a quantity is determined in comparison with another similar quantity with significant units. OR The measurement of a given ... x) The measurement conforms the validity of hypothesis and also adds to its understanding.

Why earthing is essential in electrical installation ? Explain any one type of earthing.

Description : Why earthing is essential in electrical installation ? Explain any one type of earthing. 

Last Answer : Following reasons earthing is essential in electrical installation :   1. To provide an alternative path for the leakage current to flow towards earth. 2. To save human life from danger of electrical shock ... G.I. pipe of size 19mm and funnel for pouring the water in earth pit when required.

Write short notes on fire extinguishing methods adopted in electrical engineering.

Description : Write short notes on fire extinguishing methods adopted in electrical engineering. 

Last Answer : Stand 6 to 8 feet away from the fire and follow the four-step PASS procedure. If the fire does not begin to go out immediately, leave the area at once. Always be sure ... fire causing the particles to expand chemically inhibiting combustion and expelling the oxygen thereby smothering the flames. 

State the function of any two safety tools used in electrical workshop.

Description : State the function of any two safety tools used in electrical workshop. 

Last Answer : 1. Circuit Testers: You need to have a voltage tester of some type for electrical work, and one that you trust is working properly 2. Electrical Tape: Every electrical tool kit should have at ... types of fire safety equipment are designed for detection. 11. Wooden ladder:- working with high level

Electrical engineering

Description : Electrical engineering

Last Answer : https://youtu.be/ZKnK7Na2Frw

Electrical Engineering Android APP

Description : Electrical Engineering Android APP

Last Answer : Electrical Engineering Useful Android Apps 1. Electrical Engineering https://play.google.com/store/apps/details?id=electrical.electronics.engineering 2. Electrical Engineering Symbols https:/ ... .google.com/store/apps/details?id=electrical.engineering.qanda SHARE THIS USEFUL APPS

What is the function of an electrical filter ?

Description : What is the function of an electrical filter ?

Last Answer : Filter separates different components that are mixed together. Electrical filter can separate different frequency components. Electrical filters are the electrical circuits which are use to remove unwanted frequency components from the signal.

Problems on electrical power and energy

Description : Problems on electrical power and energy

Last Answer : Problem on electrical power and energy 1 : https://youtu.be/ZvWHuMdmv9g Problem on electrical power and energy 2 : https://youtu.be/19IZMc6U2vs Problem on electrical power and energy 3 : https ... : https://youtu.be/iYqGIwA919A Problem on electrical power and energy : https://youtu.be/iWnWQz_mzHk

Problem on electrical power and energy 2

Description : Problem on electrical power and energy 2

Last Answer : Problem on electrical power and energy 2

Problem on electrical power and energy 1

Description : Problem on electrical power and energy 1

Last Answer : Problem on electrical power and energy 1

Problem on electrical power and energy 7

Description : Problem on electrical power and energy 7

Last Answer : Problem on electrical power and energy 7

Problem on electrical power and energy 6

Description : Problem on electrical power and energy 6

Last Answer : Problem on electrical power and energy 6

Problem on electrical power and energy 5

Description : Problem on electrical power and energy 5

Last Answer : Problem on electrical power and energy 5

What is electrical circuit ?

Description : What is electrical circuit ?

Last Answer : An electric circuit is the interconnection of electrical elements. Electrical elements like battery, lamp, wire etc.

State the need of energy conservation in electrical motor.

Description : State the need of energy conservation in electrical motor.

Last Answer : Need of energy conservation in Electrical motors: 1. Induction motors are used as electrical drives in industrial, commercial and residential sectors. 2. Considering all industrial applications, 70% of ... system. 8. To adopt advanced technology in design and to use better quality materials.

Describe the following energy conservation methods of electrical motor. i) By motor survey ii) By matching loads with motor rating

Description : Describe the following energy conservation methods of electrical motor. i) By motor survey ii) By matching loads with motor rating

Last Answer : Energy conservation methods of electrical motor:  1) By Motor Survey: Large industries have a massive population of LT motors. Load survey of LT motors can be taken-up methodically to ... -speed motors, eddy-current couplings, fluid couplings, and solid-state electronic variable speed drives.

Compare industrial electrical installation and residential electrical installation.

Description : Compare industrial electrical installation and residential electrical installation.

Last Answer : Basis Residential Electrical Installation Commercial Electrical Installation Load capacity Less High Input Supply Generally single phase Generally 3 phase Purpose Domestic ... supply voltage is equal to or more then 400V then there is need of caution notice

State any four general rules for Electrical Installation.

Description : State any four general rules for Electrical Installation.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Define Electrical Installation and give its classification.

Description : Define Electrical Installation and give its classification.

Last Answer : Meaning of Electrical installation : Electrical installation is a process of estimation and erection of electrical wiring with materials, and electrical machines used by ... Residential Electrical Installation ii) Commercial Electrical Installation iii) Industrial Electrical Installation 

List any two types of fuels used in electrical power generation plants.

Description : List any two types of fuels used in electrical power generation plants.

Last Answer : Types of fuels used in electrical power generation plants:  1) Solid fuels: Coal, Biomass: Wood, Nuclear fuel: Uranium, Plutonium  2) Liquid fuels: Diesel, Petrol  3) Gaseous Fuels: Natural gas, Producer ... 2) Wood 3) Uranium 4) Plutonium 5) Diesel 6) Petrol 7) Natural gas 8) Producer gas

Explain significance and purpose of electrical measurement system.

Description : Explain significance and purpose of electrical measurement system.

Last Answer : ➢ Significance of Electrical Measurement System  1. The measurement is required for measurement of all physical quantities for e.g speed, velocity, temperature, pressure etc.  2. All electrical ... 4. These standards and references may changes time to time, area to area person to person