Minimum number of bits required to represent maximum value of given analogue signal with 0.1% accuracy is:

 Minimum number of bits required to represent maximum value of given analogue signal with 0.1% accuracy is: a. 8 bits b. 9 bits c. 10 bits d. 12 bits
by

1 Answer

Answer :

10
by

Related questions

Voltage signal generated by a microphone is A. digital in nature B. analogue in nature C. consists of bits and bytes D. hybrid in nature

Description : Voltage signal generated by a microphone is A. digital in nature B. analogue in nature C. consists of bits and bytes D. hybrid in nature

Last Answer : analogue in nature

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

Load cells used for the measurement of weight has (A) Compact & rugged construction with an accuracy of 0.1 to 1% (B) No moving parts and incurs negligible deflection under load (C) Provision of thermal compensation and is hermetically sealed (D) All 'a', 'b' & 'c'

Description : Load cells used for the measurement of weight has (A) Compact & rugged construction with an accuracy of 0.1 to 1% (B) No moving parts and incurs negligible deflection under load (C) Provision of thermal compensation and is hermetically sealed (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

A 0-10 A ammeter has a guaranteed accuracy of 1% of full scale deflection, the limiting error while reading

Description : A 0-10 A ammeter has a guaranteed accuracy of 1% of full scale deflection, the limiting error while reading 2.5 A will be (a) 1% (b) 2% (c) 4% (d) None of these 

Last Answer : A

A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale...

Description : A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale reading. The voltage measured by the instrument is 83V. The percentage limiting error is

Last Answer : A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale reading. The voltage measured by the instrument is 83V. The percentage limiting error is 4.85%.

Unwanted signal that distorts a transmitted signal is called A. analogue B. noise C. digital D. tuning

Description : Unwanted signal that distorts a transmitted signal is called A. analogue B. noise C. digital D. tuning

Last Answer : noise

Data in compact disc is stored in form of A. analogue signal B. digital signal C. noise D. colors

Description : Data in compact disc is stored in form of A. analogue signal B. digital signal C. noise D. colors

Last Answer : digital signal

In a precise diet and nutrition study, you need to determine the average weight and average height of a group each to a precision of 1%. The minimum sample size required is w) 10 x) 100 y) 1000 z) 10,000

Description : In a precise diet and nutrition study, you need to determine the average weight and average height of a group each to a precision of 1%. The minimum sample size required is w) 10 x) 100 y) 1000 z) 10,000 

Last Answer : ANSWER: Z -- 10,000 

How many address bits are required to represent 4K memory (A) 5 bits. (B) 12 bits. (C) 8 bits. (D) 10 bits.

Description : How many address bits are required to represent 4K memory (A) 5 bits. (B) 12 bits. (C) 8 bits. (D) 10 bits.

Last Answer : (B) 12 bits.

How many address bits are required to represent a 32 K memory (A) 10 bits. (B) 12 bits. (C) 14 bits. (D) 16 bits.

Description : How many address bits are required to represent a 32 K memory (A) 10 bits. (B) 12 bits. (C) 14 bits. (D) 16 bits.

Last Answer : (D) 16 bits.

How many bits are required to represent one nibble ?

Description : How many bits are required to represent one nibble ?

Last Answer : 4-bits are required to represent one nibble.

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

How many bits are required to encode 32 level PCM:

Description : How many bits are required to encode 32 level PCM:  (1) 6 (2) 5 (3) 4 (4) 3

Last Answer : 5 bits are required to encode 32 level PCM.

If a modulating wave is sampled 10 times per cycle with a 5-element binary code, how many bits of information are required to transmit the signal?

Description : If a modulating wave is sampled 10 times per cycle with a 5-element binary code, how many bits of information are required to transmit the signal?

Last Answer : 28. 50.

Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it is assumed that each sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

What is the minimum number of bits required in a PCM code for a range of 10,000? A. 12 B. 9 C. 14 D. 10

Description : What is the minimum number of bits required in a PCM code for a range of 10,000? A. 12 B. 9 C. 14 D. 10

Last Answer : C. 14

Minimum number of bits required to store any 3 digit decima ln umber is equal to (A) 3 (B) 5 (C) 8 (D) 10

Description : Minimum number of bits required to store any 3 digit decima ln umber is equal to (A) 3 (B) 5 (C) 8 (D) 10 

Last Answer : Answer: D

Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s.b. 2 c. 2.5 d. 5

Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5

Last Answer : b. 2

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.

Consider the following ER diagram: Image The minimum number of tables required to represent M, N, P, R1, R2 is (A) 2 (B) 3 (C) 4 (D) 5

Description : Consider the following ER diagram:  The minimum number of tables required to represent M, N, P, R1, R2 is (A) 2 (B) 3 (C) 4 (D) 5

Last Answer : (A) 2 

Let E1 and E2 be two entities in E-R diagram with simple single valued attributes. R1 and R2 are two relationships between E1 and E2 where R1 is one-many and R2 is many-many. R1 and R2 do not have any attributes of their own. How many minimum number of tables are required to represent this situation in the Relational Model? (A) 4 (B) 3 (C) 2 (D) 1

Description : Let E1 and E2 be two entities in E-R diagram with simple single valued attributes. R1 and R2 are two relationships between E1 and E2 where R1 is one-many and R2 is many-many. R1 and R2 do not have any ... are required to represent this situation in the Relational Model? (A) 4 (B) 3 (C) 2 (D) 1

Last Answer : (B) 3 

Let M and N be two entities in an E-R diagram with simple single vale attributes. R1 and R2 are two relationship between M and N, whereas R1 is one-to-many and R2 is many-to-many. The minimum number of tables required to represent M, N, R1 and R2 in the relational model are .......... (1) 4 (2) 6 (3) 7 (4) 3

Description : Let M and N be two entities in an E-R diagram with simple single vale attributes. R1 and R2 are two relationship between M and N, whereas R1 is one-to-many and R2 is many-to-many. The minimum number of tables required to ... and R2 in the relational model are .......... (1) 4 (2) 6 (3) 7 (4) 3

Last Answer : Answer: 4

Select the correct statement. (A) More the value of group index, less thickness of pavement will be required (B) More the value of CBR, greater thickness of pavement will be required (C) Minimum and maximum values of group index can be 0 and 20 respectively (D) All of the above

Description : Select the correct statement. (A) More the value of group index, less thickness of pavement will be required (B) More the value of CBR, greater thickness of pavement will be required (C) Minimum and maximum values of group index can be 0 and 20 respectively (D) All of the above

Last Answer : Answer: Option C

Which one of the following residual biases involves the GPS accuracy? (A) Satellite dependent biases due to uncertainty in the orbital parameters of the satellite (B) Receiver-dependent biases due to clock stability with line (C) Signal propagation biases due to the sphere and troposphere propagation (D) All the above

Description : Which one of the following residual biases involves the GPS accuracy? (A) Satellite dependent biases due to uncertainty in the orbital parameters of the satellite (B) Receiver-dependent biases due to ... (C) Signal propagation biases due to the sphere and troposphere propagation (D) All the above

Last Answer : Answer: Option D

An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Last Answer : (B) 3 bits/baud

To ensure the accuracy of a transmission, what is the minimum number of times a modulating wave should be sampled in pulse modulation?

Description : To ensure the accuracy of a transmission, what is the minimum number of times a modulating wave should be sampled in pulse modulation?

Last Answer : 2.5 times the highest modulating frequency.

How many bits are needed to represent each color?

Description : How many bits are needed to represent each color?

Last Answer : Most modern digital cameras use 24 bits (8 bits per primary) torepresent a color. But more or less can be used, depending on thequality desired.Many early computer graphics cards used only 4 bits to representa color.

In instruction formats instruction is represent by a___ _ of bits: a. Sequence b. Parallel c. Both d. None

Description : In instruction formats instruction is represent by a___ _ of bits: a. Sequence b. Parallel c. Both d. None

Last Answer : a. Sequence

Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Description : Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Last Answer : 120

How many bits are used to represent Unicode, ASCII, UTF-16, and UTF-8 characters?

Description : How many bits are used to represent Unicode, ASCII, UTF-16, and UTF-8 characters?

Last Answer : Ans. Unicode requires 16 bits and ASCII require 7 bits. Although the ASCII character set uses only 7 bits, it is usually represented as 8 bits. UTF-8 represents characters using 8, 16, and 18 bit patterns. UTF-16 uses 16-bit and larger bit patterns.

The IEEE-754 double-precision format to represent floating point numbers, has a length of ........... bits. (A) 16 (B) 32 (C) 48 (D) 64

Description : The IEEE-754 double-precision format to represent floating point numbers, has a length of ........... bits. (A) 16 (B) 32 (C) 48 (D) 64

Last Answer : (D) 64

A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz

Description : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly

Last Answer : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly 4 Ghz

Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of offset should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Description : Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of ... should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Last Answer : (B) 28.28 m

Pressure required to increase the density of water by about 1% is __________ atmosphere. (A) 10 (B) 50 (C) 200 (D) 1000

Description : Pressure required to increase the density of water by about 1% is __________ atmosphere. (A) 10 (B) 50 (C) 200 (D) 1000

Last Answer : (C) 200

The number of bit required to express and ___ are determined by the accuracy desired from the computing system . a. Exponent b. Mantissa ce. Both d. None f these

Description : The number of bit required to express and ___ are determined by the accuracy desired from the computing system . a. Exponent b. Mantissa ce. Both d. None f these

Last Answer : ce. Both

A Byte is a string of - - - Bits

Last Answer :  A Byte is a string of 8 Bits

The signal is extended from 96KHz to 100KHz, so the minimum sampling frequency required is...

Description : The signal is extended from 96KHz to 100KHz, so the minimum sampling frequency required is  (a) 8KHz (b) 200KHz (c) 4KHz (d) 100KHz

Last Answer : 200KHZ

The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : DSSS

Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Description : Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Last Answer : a. digital modulation

The system is notified of a read or write operation by ___________ a) Appending an extra bit of the address b) Enabling the read or write bits of the devices c) Raising an appropriate interrupt signal d) Sending a special signal along the BUS

Description : The system is notified of a read or write operation by ___________ a) Appending an extra bit of the address b) Enabling the read or write bits of the devices c) Raising an appropriate interrupt signal d) Sending a special signal along the BUS

Last Answer : Sending a special signal along the BUS

Adding bits to synchronize one digital signal to another is called: a. bit stuffing b. bit-synch c. SDH d. WDM

Description : Adding bits to synchronize one digital signal to another is called: a. bit stuffing b. bit-synch c. SDH d. WDM

Last Answer : a. bit stuffing

The baud rate of a signal is 600 baud/second. If each signal unit carries 6 bits, then the bit rate of a signal is ................. (A) 3600 (B) 100 (C) 6/600 (D) None of the above

Description : The baud rate of a signal is 600 baud/second. If each signal unit carries 6 bits, then the bit rate of a signal is ................. (A) 3600 (B) 100 (C) 6/600 (D) None of the above

Last Answer : (A) 3600 

An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & 1000 bps (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Last Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps

Explain the difference between analogue and digital signals. -Technology

Description : Explain the difference between analogue and digital signals. -Technology

Last Answer : Analogue Signal- An analogue signal is any continuous signal. Varying quality of a signal represents changes in the process. Analogue is usually thought of in an electrical context; however, mechanical ... or icons, or continuous, such as sounds, images, and other measurements of continuous systems.

A hybrid computer A) Resembles digital computer B) Resembles analogue computer C) Resembles both a digital and analogue computer D) None of the above

Description : A hybrid computer A) Resembles digital computer B) Resembles analogue computer C) Resembles both a digital and analogue computer D) None of the above

Last Answer : Answer : C

All of the following statements about puromycin are true except (A) It is an alanyl tRNA analogue (B) It causes premature termination of protein synthesis (C) It inhibits protein synthesis in prokaryotes (D) It inhibits protein synthesis in eukaryotes

Description : All of the following statements about puromycin are true except (A) It is an alanyl tRNA analogue (B) It causes premature termination of protein synthesis (C) It inhibits protein synthesis in prokaryotes (D) It inhibits protein synthesis in eukaryotes

Last Answer : Answer : A

All of the following statements about allopurinol are true except (A) It is a structural analogue of uric acid (B) It can prevent uric acid stones in the kidneys (C) It increases the urinary excretion of xanthine and hypoxanthine (D) It is a competitive inhibitor of xanthine oxidase

Description : All of the following statements about allopurinol are true except (A) It is a structural analogue of uric acid (B) It can prevent uric acid stones in the kidneys (C) It increases the urinary excretion of xanthine and hypoxanthine (D) It is a competitive inhibitor of xanthine oxidase

Last Answer : Answer : A

A synthetic nucleotide analogue, used in the chemotherapy of cancer and viral infections is (A) Arabinosyl cytosine (B) 4-Hydroxypyrazolopyrimidine (C) 6-Mercaptopurine (D) 6-Thioguanine

Description : A synthetic nucleotide analogue, used in the chemotherapy of cancer and viral infections is (A) Arabinosyl cytosine (B) 4-Hydroxypyrazolopyrimidine (C) 6-Mercaptopurine (D) 6-Thioguanine

Last Answer : Answer : A

A synthetic nucleotide analogue, 4-hydroxypyrazolopyrimidine is used in the treatment of (A) Acute nephritis (B) Gout (C) Cystic fibrosis of lung (D) Multiple myeloma

Description : A synthetic nucleotide analogue, 4-hydroxypyrazolopyrimidine is used in the treatment of (A) Acute nephritis (B) Gout (C) Cystic fibrosis of lung (D) Multiple myeloma

Last Answer : Answer : B