An OP amp has an open loop gain of 1,00,000. If the feedback fraction is 0.02, the approximate closed loop...

An OP amp has an open loop gain of 1,00,000. If the feedback fraction is 0.02, the approximate closed loop gain is (a) 1 (b) 1,00,000 (c) 50 (d) 0.02
by

1 Answer

Answer :

The closed loop gain Ag = G/(1+G*f)

Where G is the open loop gain and f is the feedback fraction 

So Ag = 49.975
by

Related questions

The closed loop gain of an OPAMP is dependent upon, whether the OP AMP is used : -

Description : The closed loop gain of an OPAMP is dependent upon, whether the OP AMP is used : -  a) in inverting mode b) in non -inverting mode c) is independent of the fact whether the ... inverting terminal d) is depending upon the fact whether the input is connected to inverting or non -inverting terminal

Last Answer : The closed loop gain of an OPAMP is dependent upon, whether the OP AMP is used : - is depending upon the fact whether the input is connected to inverting or non -inverting terminal

A non inverting closed loop op amp circuit generally has a gain factor

Last Answer : A non inverting closed loop op amp circuit generally has a gain factor Greater than one.

Actual op-amp may have an open loop gain of A. 102 B. 105 C. 103 D. 104

Description : Actual op-amp may have an open loop gain of A. 102 B. 105 C. 103 D. 104

Last Answer : 105

Why open loop OP-AMP configurations are not used in linear applications?

Description : Why open loop OP-AMP configurations are not used in linear applications?

Last Answer : The open loop gain of the op-amp is not a constant and it varies with changing the temperature and variations in power supply.Also the bandwidth of the open loop op-amp is negligibly small.For this reasons open loop OP-AMP configurations are not used in linear applications.

For a feedback amplifier, if the loop gain is much greater than unity, the closed loop gain will be equal to

Description : For a feedback amplifier, if the loop gain is much greater than unity, the closed loop gain will be equal to

Last Answer : For a feedback amplifier, if the loop gain is much greater than unity, the closed loop gain will be equal to inverse of feedback factor

In closed loop control system, with positive value of feedback gain the overall gain of the system will

Description : In closed loop control system, with positive value of feedback gain the overall gain of the system will

Last Answer : In closed loop control system, with positive value of feedback gain the overall gain of the system will decrease.

What is the type of feedback used in an op-amp Schmitt trigger?

Description : What is the type of feedback used in an op-amp Schmitt trigger?

Last Answer : The type of feedback used in an op-amp Schmitt trigger is positive feedback.

What is the type of feedback employed in the inverting op-amp amplifier?

Description : What is the type of feedback employed in the inverting op-amp amplifier?

Last Answer : Negative feedback is employed in the inverting op-amp amplifier.

In which system we get feedback? a.Open-loop system b.Machine control system c.Closed-loop system d.None of the above

Description : In which system we get feedback? a.Open-loop system b.Machine control system c.Closed-loop system d.None of the above

Last Answer : c.Closed-loop system

An Op-amp as a voltage follower has a voltage gain of

Description : An Op-amp as a voltage follower has a voltage gain of

Last Answer : An Op-amp as a voltage follower has a voltage gain of Unity

An operational amplifier has an open loop gain of 200,000. Its output exhibits saturation at 10V.

Description : An operational amplifier has an open loop gain of 200,000. Its output exhibits saturation at 10V. The threshold differential voltage of the amplifier is  A) 25 micro-volt B) 50 micro-volt C) 5 Volts D) 10 volts

Last Answer : An operational amplifier has an open loop gain of 200,000. Its output exhibits saturation at 10V. The threshold differential voltage of the amplifier is 50 micro-volt

An OP amp has a slew rate of 1V/µs. At a signal frequency of 0.1 MHz, the maximum undistorted sine wave ...

Description : An OP amp has a slew rate of 1V/µs. At a signal frequency of 0.1 MHz, the maximum undistorted sine wave amplitude is (a) 8V (b) 4.82 V (c) 2.02 V (d) 1.592 V

Last Answer : Slew rate = 2πfv where v is the amplitude V=(1/2π*0.1) = 1.592V

select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Description : select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Last Answer : Both the input signal and the feedback signal.

Negative feedback in a closed-loop control system DOES NOT

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

In the illustrated amplifier, the RESET potentiometer A1R2 sets the stability of the control loop by changing the reset time constant. As the potentiometer is turned clockwise _________. EL-0060 A. the gain is increased B. the stability is increased by slowing the response time C. feedback is increased to the summing point at terminal 5 D. response time is increased decreasing stability

Description : In the illustrated amplifier, the RESET potentiometer A1R2 sets the stability of the control loop by changing the reset time constant. As the potentiometer is turned clockwise _________. EL-0060 A. ... is increased to the summing point at terminal 5 D. response time is increased decreasing stability

Last Answer : Answer: B

The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0.

Description : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

Last Answer : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

Define the following terms related to Op-Amp: i) CMRR ii) SVRR

Description : Define the following terms related to Op-Amp: i) CMRR ii) SVRR

Last Answer : Definition:- i) SVRR: It is defined as the ratio of change of input offset voltage to the change in one supply voltage while keeping other supply voltage constant. Ideally,SVRR=0  ii)CMMR:-The ... gain should exceed common-mode gain, this will be a positive number, and the higher the better.

State any two characteristics of an ideal Op-amp.

Description : State any two characteristics of an ideal Op-amp.

Last Answer : Characteristics of Op-amp: i) Input offset voltage ii) Input offset current iii) Input bias current iv) Differential input resistance v) Input capacitance vi) CMRR-common mode rejection ration vii) ... voltage rejection ratio(SVRR) viii) Output resistance ix) Voltage gain x) Bandwidth xi) Slew rate

Draw and explain the Op-amp based subtractor

Description : Draw and explain the Op-amp based subtractor

Last Answer : Working The subtractor circuit is a basic op-amp circuit whose output voltage is the difference between two input voltages.  In the above circuit, the two input voltages are V1 and V2.  The op amp is used ... When differential gain is 1, ie Rf = R,  the output voltage is Vo = (V2 - V1).

Draw the diagram of zero crossing detector using op-amp and explain its working.

Description : Draw the diagram of zero crossing detector using op-amp and explain its working.

Last Answer : The zero crossing detector circuit is an important application of the op-amp comparator circuit. It can also be called as the sine to square wave converter. Anyone of the inverting or non-inverting ... the possibility of any false zero crossing due to noise voltages at the op-amp input.

What is the Output voltage of Op-amp for input voltage of Vi1=150 μV,Vi2=140 μV if the amplifier ...

Description : What is the Output voltage of Op-amp for input voltage of Vi1=150 μV,Vi2=140 μV if the amplifier has differential gain of Ad=4000 and value of CMRR is 100. 

Last Answer : i don know

The radius of a sphere is 8 cm and 0.02 cm is the error in its measurement. Find the approximate error in its volume.

Description : The radius of a sphere is 8 cm and 0.02 cm is the error in its measurement. Find the approximate error in its volume.

Last Answer : The radius of a sphere is 8 cm and 0.02 cm is the error in its measurement. Find the approximate error in its volume.

What is the approximate unstimulated salivary flow rate, A. 2 ml/min B. 0.2 ml/min C. 0.02 ml/min D. 20 ml/min

Description : What is the approximate unstimulated salivary flow rate, A. 2 ml/min B. 0.2 ml/min C. 0.02 ml/min D. 20 ml/min

Last Answer : B. 0.2 ml/min

On which of the following factors does the sensitivity of a closed loop system to gain changes and load disturbances depend? a) Frequency b) Loop gain c) Forward gain d) All of the mentioned

Description : On which of the following factors does the sensitivity of a closed loop system to gain changes and load disturbances depend? a) Frequency b) Loop gain c) Forward gain d) All of the mentioned

Last Answer : Ans: D

In the ideal closed loop operational amplifier, the gain depends on

Description : In the ideal closed loop operational amplifier, the gain depends on (A) value of the series component (B) value of the feedback component (C) on the operational amplifier itself (D) both A and B

Last Answer : In the ideal closed loop operational amplifier, the gain depends on (A) value of the series component (B) value of the feedback component (C) on the operational amplifier itself (D) both A and B

After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be

Description : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle criterion alone (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

Last Answer : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle ... (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

The closed-loop voltage gain of an inverting amplifier equal to

Last Answer : The closed-loop voltage gain of an inverting amplifier equal to The feedback resistance divided by the input resistance.

A limited company makes a net profit of Rs. 2,00,000 after writing off preliminary expenses amounting to Rs. 20,000 and providing for depreciation on assets amounting to Rs. 40,000 and gain of Rs. 10,000 on sale of a piece of machinery. What are the funds from operation ? (A) Rs. 2,00,000 (B) Rs. 2,40,000 (C) Rs. 2,50,000 (D) Rs. 2,60,000

Description : A limited company makes a net profit of Rs. 2,00,000 after writing off preliminary expenses amounting to Rs. 20,000 and providing for depreciation on assets amounting to Rs. 40,000 and gain of Rs. 10,000 on sale of a piece of ... 2,00,000 (B) Rs. 2,40,000 (C) Rs. 2,50,000 (D) Rs. 2,60,000

Last Answer : Answer: Rs. 2,50,000

What is Op -Amp ?

Description : What is Op -Amp ?

Last Answer : The operational amplifier is abbreviated as OP-Amp . This OP-Amp is a high gain direct coupled negative feedback amplifier circuit with multiple transistors. Op-Amp is a modular , multistage amplifying device with a ... of op-amp is 500 ml. Op-amp IC : A709, LM108, LM208, CA741 and CA741T.

What is op amp?

Description : What is op amp?

Last Answer : An operational amplifier, which is often called an op-amp, is a DC-coupled high-gain electronic voltage amplifier with a differential input and, usually, a single-ended output.[1] An op-amp ... at the input terminals (ideally infinite) and low output impedance at the output terminal(s) (idea

What is op amp?

Description : What is op amp?

Last Answer : An operational amplifier, which is often called an op-amp, is a DC-coupled high-gain electronic voltage amplifier with a differential input and, usually, a single-ended output.[1] An op-amp ... at the input terminals (ideally infinite) and low output impedance at the output terminal(s) (idea

What is the basic building block of an op-amp?

Description : What is the basic building block of an op-amp?

Last Answer : The basic building block of an op-amp is differential amplifier.

What are the DC characteristics of an op-amp?

Description : What are the DC characteristics of an op-amp?

Last Answer : a. input bias current b. Input offset current c .Input offset voltage d. Thermal drift

What are the AC characteristics of an op-amp?

Description : What are the AC characteristics of an op-amp?

Last Answer : a. Frequency response b. Slew rate

What is compensated op-amp?

Description : What is compensated op-amp?

Last Answer : Op-amp, which uses a capacitor internally for compensation, is called a compensated op-amp. This op-amp has a high gain stability and low bandwidth.

What is an op-amp?

Description : What is an op-amp?

Last Answer : The operational amplifier is a multi-terminal device, which is quite complex internally. An operational amplifier is a direct coupled high gain amplifier usually consisting of one or more ... as well as ac input signals and was originally designed for computing such mathematical functions.

Coil of relay is connected to the A. input of op-amp B. output of op-amp C. midpoint of op-amD. anywhere in between input and ouput of op-amp

Description : Coil of relay is connected to the A. input of op-amp B. output of op-amp C. midpoint of op-am D. anywhere in between input and ouput of op-amp

Last Answer : output of op-amp

If current of 20 mA is passing through op-amp and voltage drop across series resistor is 10 V then value of resistance is A. 500Ω B. 400Ω C. 300Ω D. 200Ω

Description : If current of 20 mA is passing through op-amp and voltage drop across series resistor is 10 V then value of resistance is A. 500Ω B. 400Ω C. 300Ω D. 200Ω

Last Answer : 500Ω

As long as op-amp is not saturated, the potential difference between inverting and non-inverting inputs is A. zero B. infinite C. 1 D. 2

Description : As long as op-amp is not saturated, the potential difference between inverting and non-inverting inputs is A. zero B. infinite C. 1 D. 2

Last Answer : zero

A device used to avoid the relay destroying the op-amp is A. diode B. LED C. reverse bias diode D. forward biased diode

Description :  A device used to avoid the relay destroying the op-amp is A. diode B. LED C. reverse bias diode D. forward biased diode

Last Answer : reverse bias diode

Number of power supplies required to get output of op-amp is A. two B. four C. six D. three

Description : Number of power supplies required to get output of op-amp is A. two B. four C. six D. three

Last Answer : two

Impedance of ideal op-amp is A. zero B. 1 C. infinite D. 2

Description : Impedance of ideal op-amp is A. zero B. 1 C. infinite D. 2

Last Answer :  infinite

Output resistance of an actual op-amp is A. 45Ω B. 46Ω C. 70Ω D. 75Ω

Description : Output resistance of an actual op-amp is A. 45Ω B. 46Ω C. 70Ω D. 75Ω

Last Answer : 75Ω

Op-amp can provide maximum output current of A. 25 mA B. 30 mA C. 35 mA D. 40 mA

Description : Op-amp can provide maximum output current of A. 25 mAB. 30 mA C. 35 mA D. 40 mA

Last Answer :  25 mA

Write transfer function of op amp as an integer.

Description : Write transfer function of op amp as an integer.

Last Answer : The transfer function of the integer is  LAL=1/MR1cf

What are the areas of application of non-linear op- amp circuits?

Description : What are the areas of application of non-linear op- amp circuits?

Last Answer : 1. Industrial instrumentation 2. Communication 3. Signal processing

Define CMRR of an op-amp.

Description : Define CMRR of an op-amp.

Last Answer : The relative sensitivity of an op-amp to a difference signal as compared to a common – mode signal is called the common –mode rejection ratio. It is expressed in decibels. CMRR= Ad/Ac

Define input offset current. State the reasons for the offset currents at the input of the op-amp.

Description : Define input offset current. State the reasons for the offset currents at the input of the op-amp.

Last Answer : The difference between the bias currents at the input terminals of the op-amp is called as input offset current. The input terminals conduct a small value of dc current to bias the input transistors.Since the input transistors cannot be made identical,there exists a difference in bias currents.

Define virtual ground of a OP-Amp?

Description : Define virtual ground of a OP-Amp? 

Last Answer : A virtual ground is a ground which acts like a ground. It is a point that is at the fixed ground potential (0v),though it is not practically connected to the actual ground or common terminal of the circuit.

what is meant by virtual ground in the op amp ?

Description : what is meant by virtual ground in the op amp ?

Last Answer : Ans-The op amp connected in a negative feedback configuration that is the o/p connected to the inverting terminal tried to produce the same voltage at the inverting node as we applied to ... the inverting node at the ground potential and whatever the difference between these two nodes are amplified.