Arc welding uses following electric supply

Arc welding uses following electric supply (A) ac (B) dc (C) both ac and dc (D) spiral waveform 
by

2 Answers

Answer :

Arc welding uses following electric supply 

both ac and dc

by

Answer :

both ac and dc
by

Related questions

The supply for arc welding is :

Description : The supply for arc welding is : 

Last Answer : The supply for arc welding is : Low voltage, high current ac or dc voltage

Projection welding is (i) Electric arc welding (ii) Gas welding (iii)Spot welding (iv) None

Description : Projection welding is (i) Electric arc welding (ii) Gas welding (iii)Spot welding (iv) None

Last Answer : (iv) None

Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Description : Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Last Answer : b) Electric resistance welding

Among gas and electric arc welding, which has the higher rate of heating? a) Gas welding b) Electric arc welding c) Gas welding and electric arc welding have equal rate of heating d) Cannot be determined

Description : Among gas and electric arc welding, which has the higher rate of heating? a) Gas welding b) Electric arc welding c) Gas welding and electric arc welding have equal rate of heating d) Cannot be determined

Last Answer : b) Electric arc welding

Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Description : Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Last Answer : a) Thermit welding

The electric arc welding is a type of ............. welding. (a) forge (b) fusion

Description : The electric arc welding is a type of ............. welding. (a) forge (b) fusion

Last Answer : b) fusion

Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :

Description : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  (C) Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

Last Answer : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  ... Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

Which of the following generators is used for DC arc welding application ?

Description :  Which of the following generators is used for DC arc welding application ? (A) Series generator (B) Shunt generator (C) Differential compound generator (D) Over -compound generator

Last Answer : A

The type of dc generator used for arc welding purposes is a

Last Answer : The type of dc generator used for arc welding purposes is a Differentially compound generator.

Arc blow is a welding defect which is encountered in _________.

Last Answer : Arc blow is a welding defect which is encountered in arc welding using a.c. current.

Out of the following methods of heating the one which is independent of supply frequency is (A) electric arc heating (B) induction heating (C) electric resistance heating (D) dielectric heating

Description : Out of the following methods of heating the one which is independent of supply frequency is (A) electric arc heating (B) induction heating (C) electric resistance heating (D) dielectric heating

Last Answer : (C) electric resistance heating

Argon is used in arc welding because

Description : Argon is used in arc welding because

Last Answer : Argon is used in arc welding because A. low reactivity with metal B. ability to lower the ... of metal C. flammability D. high calorific value

What type of arc welding equipment is necessary when participating in arc welding?

Description : What type of arc welding equipment is necessary when participating in arc welding?

Last Answer : The most important equipment you can have is your safety equipment, your gloves, visor and heavy-duty clothing. You have to have some sort of a power source to generate the electricity necessary for arc welding, so I'd say a power source is your most important arc welding equipment.

In arc welding, Argon is used because of its - (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Description : In arc welding, Argon is used because of its - (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Last Answer : (1) Low reactivity with metal Explanation: In arc welding, Argon is used as a shielding gas because it is chemically inert and forms no compounds. At the high temperatures that welding requires, the ... to brittle welds and instability in the welding arc. So,argon and other inert gases are sprayed.

The required DC voltage for arc welding is- (1) 6 to 9 V (2) 50 to 60 V (3) 200 to 250 V (4) 90 to 100 V

Description : The required DC voltage for arc welding is- (1) 6 to 9 V (2) 50 to 60 V (3) 200 to 250 V (4) 90 to 100 V

Last Answer : (3) 200 to 250 V

Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Description : Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Last Answer : (B) Arc

Projection welding & stud welding is categorised as the __________ welding. (A) Pressure (B) Thermit (C) Resistance (D) Arc

Description : Projection welding & stud welding is categorised as the __________ welding. (A) Pressure (B) Thermit (C) Resistance (D) Arc

Last Answer : C) Resistance

Which of the following mainly decides the current to be employed is arc welding? (A) Electrode size (B) Plate thickness (C) Voltage across the arc (D) Welded portion length

Description : Which of the following mainly decides the current to be employed is arc welding? (A) Electrode size (B) Plate thickness (C) Voltage across the arc (D) Welded portion length

Last Answer : (A) Electrode size

Coating provided on the electrodes used in the arc welding is not expected to (A) Add alloying elements (B) Prevent electrode from contamination (C) Stabilise the arc (D) Provide protective atmosphere to weld

Description : Coating provided on the electrodes used in the arc welding is not expected to (A) Add alloying elements (B) Prevent electrode from contamination (C) Stabilise the arc (D) Provide protective atmosphere to weld

Last Answer : (B) Prevent electrode from contamination

Cold cracking in the heat affected zone of a high strength steel weld can take place because of the (A) Retained austenite (B) Martensite formation (C) Relatively high sulphur content in the base metal (D) Sufficient hydrogen present in the welding arc

Description : Cold cracking in the heat affected zone of a high strength steel weld can take place because of the (A) Retained austenite (B) Martensite formation (C) Relatively high sulphur content in the base metal (D) Sufficient hydrogen present in the welding arc

Last Answer : (B) Martensite formation

Stainless steel is welded using (A) Oxy-acetylene flame (B) Oxy-hydrogen flame (C) Arc welding (D) Inert gas arc welding

Description : Stainless steel is welded using (A) Oxy-acetylene flame (B) Oxy-hydrogen flame (C) Arc welding (D) Inert gas arc welding

Last Answer : (D) Inert gas arc welding

When MMA welding what will be the effect on the weld f the power source was changed from AC to DC-ve? a) None b) Higher deposition rate c) It would slightly increase the depth of penetration d) The arc would become unstable

Description : When MMA welding what will be the effect on the weld f the power source was changed from AC to DC-ve? a) None b) Higher deposition rate c) It would slightly increase the depth of penetration d) The arc would become unstable

Last Answer : b) Higher deposition rate

What is a typical ARC voltage setting when welding with the TIG (GTAW) process? a) 18-20V b) 24-26V c) 10-12V d) 70-90V

Description : What is a typical ARC voltage setting when welding with the TIG (GTAW) process? a) 18-20V b) 24-26V c) 10-12V d) 70-90V

Last Answer : c) 10-12V

A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC+ve polarity, and a ROL:of 180mm per min. What would be the arc energy? a) Insufficient information given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Last Answer : d) 2.0 kJ/mm

Explain the shielded metal arc welding (SMAW) processes with neat sketch. State its two advantages and disadvantages.

Description : Explain the shielded metal arc welding (SMAW) processes with neat sketch. State its two advantages and disadvantages.

Last Answer : Working  : Shielded metal arc welding uses a metallic consumable electrode of a proper composition for generating arc between itself and the parent work piece. The molten electrode metal fills the weld ... . 2. Weld may contain slag inclusions 3. Fumes make difficult the process control.

List common equipments used for arc welding process.

Description : List common equipments used for arc welding process.

Last Answer : 1. A.C. or D.C. machine 2. Electrode (bare or coated) 3. Electrode Holder 4. Cables and its connectors 5. Chipping Hammer 6. Earthing Clamps 7. Wire-brush 8. Helmet 9. Safety Goggles 10. Hand Gloves 11. Apron Sleeves etc.

Describe the working principle of Arc Welding.

Description : Describe the working principle of Arc Welding.

Last Answer : Arc welding is the most extensively employed method of joining metal parts. Here the source of heat is an electric arc. The arc column is generated between an anode which is the positive pole of D.C. ... also melted and is transferred in to the metal in the form of globules of molten metal.  

Compare resistance welding and arc welding.

Description : Compare resistance welding and arc welding. 

Last Answer : Sr. No Resistance Welding Arc Welding 1 It is plastic welding It is fusion welding. 2 Arc is produced by heat due to resistance of flow of current by work and by application ... 8 Less skilled operator can do the job. More skilled operator is required to the job

Draw a schematic of a set up of shielded metal arc welding.

Description : Draw a schematic of a set up of shielded metal arc welding. 

Last Answer : Fig. Shielded metal arc welding set-up

In arc welding, Argon is used because of its (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Description : In arc welding, Argon is used because of its (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Last Answer :  Low reactivity with metal

Compare between Resistance welding and Arc welding on any six points.

Description : Compare between Resistance welding and Arc welding on any six points.

Last Answer : Sr.No Parameters Resistance Welding Arc Welding 1 Type of welding Plastic/Pressure/Non-fusion welding Fusion/Non pressure welding 2 Principle of heat developed Heat ... It is suitable for mass production It is suitable for heavy job, maintenance and repair work

The commonly used gases in tungsten arc welding are

Description : The commonly used gases in tungsten arc welding are 1.Hydrogen and oxygen 2.Hydrogen and organ 3.Hydrogen and helium 4.Helium and argon

Last Answer : The commonly used gases in tungsten arc welding are Helium and argon

For arc welding current range is usually

Description : For arc welding current range is usually  (1) 10 to 15 A (2) 30 to 40 A (3) 50 to 100 A (4) 100 to 350 A

Last Answer : For arc welding current range is usually 100 to 350 A

Electric resistance seam welding uses __________ electrodes. (A) Pointed (B) Disc. (C) Flat (D) Domed

Description : Electric resistance seam welding uses __________ electrodes. (A) Pointed (B) Disc. (C) Flat (D) Domed

Last Answer : Ans: B Disc type electrodes are used for electric resistance seam welding.

State working principle of electric welding.

Description : State working principle of electric welding. 

Last Answer : Working principle of Electric welding: In resistance welding, sufficiently heavy current at low voltage is passed directly through two metals in contact to be welded. Heat is produced due to I2R ... industry. 15. For fabrication and repair work. 16. In other metal processing industries.

Describe with a neat diagram, the process of any one type of electric welding.

Description : Describe with a neat diagram, the process of any one type of electric welding. 

Last Answer : Methods of electric welding :  1. Resistance welding  i Butt welding  ii Spot welding  iii Seam welding  iv Projection welding  2. Arc Welding  i Carbon arc welding  ii ... as copper, iron etc. The electric arc effectively concentrate heat on the surfaces it is desired to join.

When using multiple SAW arc systems (twin wires etc), the arcs often have different polarities or use all AC rather than DC polarity, this is to? a) Prevent arc blow between arcs b) To maximize productivity c) To even out the power factor on the mains supply d) Make it easier to initiate the arc

Description : When using multiple SAW arc systems (twin wires etc), the arcs often have different polarities or use all AC rather than DC polarity, this is to? a) Prevent arc blow between arcs b) To maximize productivity c) To even out the power factor on the mains supply d) Make it easier to initiate the arc

Last Answer : a) Prevent arc blow between arcs

Welding Supply?

Description : Welding Supply?

Last Answer : form_title= Welding Supply form_header= Become a pro welder today. What supplies do you need?*= _ [50] Is this for private or commercial use? Do you need safety equipment?*= () Yes () No

The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Description : The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Last Answer : (B) Flow of current through a heating element

An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace. (A) Resistance (B) Arc (C) Low frequency induction (D) None of these

Description : An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace. (A) Resistance (B) Arc (C) Low frequency induction (D) None of these

Last Answer : (B) Arc

__________ furnace is not an electric furnace. (A) Arc (B) Induction (C) Pot (D) Resistance

Description : __________ furnace is not an electric furnace. (A) Arc (B) Induction (C) Pot (D) Resistance

Last Answer : (C) Pot

The electric furnace in which heat is produced by a combination of induced current and skin effect is called __________ furnace. (A) Arc(B) Resistance(C) Low frequency induction(D) High frequency induction

Description : The electric furnace in which heat is produced by a combination of induced current and skin effect is called __________ furnace. (A) Arc (B) Resistance (C) Low frequency induction (D) High frequency induction

Last Answer : (D) High frequency induction

Nitric acid is produced on commercial scale in a fertiliser plant by (A) Oxidation of ammonia (B) CaNO3 + H2SO4 reaction (C) Passing air through high voltage electric arc (D) None of these

Description : Nitric acid is produced on commercial scale in a fertiliser plant by (A) Oxidation of ammonia (B) CaNO3 + H2SO4 reaction (C) Passing air through high voltage electric arc (D) None of these

Last Answer : (A) Oxidation of ammonia

The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Description : The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Last Answer : (B) 400 - 700

The refractory lining of the bottom in a basic electric arc furnace is made of (A) Silica (B) Alumina (C) Magnesia (D) Fireclay

Description : The refractory lining of the bottom in a basic electric arc furnace is made of (A) Silica (B) Alumina (C) Magnesia (D) Fireclay

Last Answer : Option C

Two parallel wires carrying currents in opposite directions will: w) attract each other x) repel each other y) cause an electric arc to form z) not affect each other

Description : Two parallel wires carrying currents in opposite directions will: w) attract each other x) repel each other y) cause an electric arc to form z) not affect each other

Last Answer : ANSWER: X -- REPEL EACH OTHER

Thermit welding uses the following energy source. (A) Electrical energy (B) Chemical energy (C) Energy of high velocity electrons (D) Heat generated by friction

Description : Thermit welding uses the following energy source. (A) Electrical energy (B) Chemical energy (C) Energy of high velocity electrons (D) Heat generated by friction

Last Answer : (B) Chemical energy

Which of the following uses a flat characteristic? a) MAG (GMAW) b) Oxy-fuel gas welding c) Resistance spot welding d) SAW using greater than 1000 amps

Description : Which of the following uses a flat characteristic? a) MAG (GMAW) b) Oxy-fuel gas welding c) Resistance spot welding d) SAW using greater than 1000 amps

Last Answer : a) MAG (GMAW)

Linde welding uses

Description : Linde welding uses 1.Neutral flame and rightward technique 2.Carburizing flame and rightward technique 3.Neutral flame and leftward technique 4.Oxidizing flame and leftward technique

Last Answer : Linde welding uses Carburizing flame and rightward technique