Reciprocal of resistivity is called a. Resistance b. Inductance c. Conductivity d. Flexibility

Reciprocal of resistivity is called
a. Resistance b. Inductance
c. Conductivity d. Flexibility
by

1 Answer

Answer :

c. Conductivity
by

Related questions

An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance

Description : An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance 

Last Answer : Solution: For RLC series circuit

The ratio of stress to strain i: a) Modulus of conductivity b) Modules of Elasticity c) Modulus of electricity d) Modulus of Viscosity

Description : The ratio of stress to strain i: a) Modulus of conductivity b) Modules of Elasticity c) Modulus of electricity d) Modulus of Viscosity

Last Answer : b) Modules of Elasticity

Pick out the wrong statement. (A) Reciprocal of the resistance to heat flow is called thermal conductance (B) Unit of thermal conductance is W/°K (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A (D) None of these

Description : Pick out the wrong statement. (A) Reciprocal of the resistance to heat flow is called thermal conductance (B) Unit of thermal conductance is W/°K (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A (D) None of these

Last Answer : (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A

Resistance of a super conductor is a. Finite b. Infinite c. Zero d. changes with every conductor

Description : Resistance of a super conductor is a. Finite b. Infinite c. Zero d. changes with every conductor

Last Answer : c. Zero

Resistance of a conductor depends upon a. nature of conductor b. dimension of conductor c. physical state of the conductor d. all of above

Description : Resistance of a conductor depends upon a. nature of conductor b. dimension of conductor c. physical state of the conductor d. all of above

Last Answer : d. all of above

Find the Norton equivalent resistance for the network shown in Fig No. 2

Description : Find the Norton equivalent resistance for the network shown in Fig No. 2

Last Answer : Solution: To find Norton’s equivalent resistance removing voltage source and current source. Voltage source is replaced by short circuit and current source is replaced by open circuit so, we get circuit as

A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :

Description : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  (C) Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

Last Answer : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  ... Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

Which is an instrument which measures insulation resistance of an electric circuit relative to earth and one another?

Last Answer : Meggar is an instrument which measures the insulation resistance of an electric circuit relative to earth and one another.

The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Description : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Last Answer : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

What is the reciprocal of resistivity?

Description : What is the reciprocal of resistivity?

Last Answer : conductivity, mho

What is the reciprocal of inductance?

Description : What is the reciprocal of inductance?

Last Answer : This term is not exist

A combination of N-type and P-type material is called a) Diode b) Transistor c) Resistor d) Capacitor

Description : A combination of N-type and P-type material is called a) Diode b) Transistor c) Resistor d) Capacitor

Last Answer : a) Diode

The maximum stress that a body can tolerate is called: a) UTS b) Permanent stress c) Elastic strength d) Plastic stress

Description : The maximum stress that a body can tolerate is called: a) UTS b) Permanent stress c) Elastic strength d) Plastic stress

Last Answer : a) UTS

The ratio of stress to volumetric strain is called a) Shear Modulus b) Young’s Modulus c) Bulk Modulus d) Modulus of elasticity

Description : The ratio of stress to volumetric strain is called a) Shear Modulus b) Young’s Modulus c) Bulk Modulus d) Modulus of elasticity

Last Answer : c) Bulk Modulus

The deformation of a solid when stress is applied is called a) Strain b) Elasticity c) Rigidity d) Pressure

Description : The deformation of a solid when stress is applied is called a) Strain b) Elasticity c) Rigidity d) Pressure

Last Answer : a) Strain

The ability of a body to return to its original shape is called: a) Plasticity b) Elasticity c) Strain d) Stress

Description : The ability of a body to return to its original shape is called: a) Plasticity b) Elasticity c) Strain d) Stress

Last Answer : b) Elasticity

The ability of materials to become polarized under an applied electric field is called _______

Description : The ability of materials to become polarized under an applied electric field is called _______ A) Ferroelectricity B) Paraelectricity C) Polectricity D) None of these

Last Answer : The ability of materials to become polarized under an applied electric field is called Paraelectricity

Electric pressure is also called?

Description : Electric pressure is also called?

Last Answer : Electric pressure is also called voltage.

An electric motor in which both stator field and rotor rotates with same speed is called?

Description : An electric motor in which both stator field and rotor rotates with same speed is called?

Last Answer : An electric motor in which both stator field and rotor rotates with same speed is called synchronous motor.

Compressor wizards, share your wisdom?

Description : Compressor wizards, share your wisdom?

Last Answer : There is this chap that bought a small compressor for electronics dusting purposes and compared it to a normal blower style duster. The compressor was a complete failure.

How would you handle UPS packages with this setup?

Description : How would you handle UPS packages with this setup?

Last Answer : Pick them up from the depot…

Q-12 which Testing is used in high thickness job in LNT?

Description : Q-12 which Testing is used in high thickness job in LNT?

Last Answer : Ultrasonic Testing.

Q-11 What is the purpose of dust free zone in LNT?

Description : Q-11 What is the purpose of dust free zone in LNT?

Last Answer : Special dust-free enclosures with temperature and humidity control enable the Company to achieve manufacturing excellence in Class 1 nuclear island components. L&T manufactures reactor vessels, steam ... and Heat Exchangers are manufactured within dust-free enclosures at L&T's workshops.

Q-10 In TANDEM SAW process, why AC and DC both currents are used?

Description : Q-10 In TANDEM SAW process, why AC and DC both currents are used?

Last Answer : AC will melt the base metal and make weld pool in the base metal and by DC it will fill the weld metal in the weld pool.

Q-9 how many electrodes are used in the TANDEM SAW? What is the polarity of the both electrode?

Description : Q-9 how many electrodes are used in the TANDEM SAW? What is the polarity of the both electrode?

Last Answer : In TANDEM SAW process there are more than one electrode is used. But for first electrode alternative current and for second electrode direct current shall be used.

Q-8 which types of SAW process are used in Larsen and Toubro?

Description : Q-8 which types of SAW process are used in Larsen and Toubro?

Last Answer : Tandem SAW Narrow groove application As the section thickness of vessel for nuclear and petroleum industry increase, the desire for reduced weld time and material consumption has driven the joint on ... process is carried out. LNT practice that for many of high thickness nuclear pressure vessel.

Q-7 during welding process, why sinusoidal wave form is converted in to the square wave form?

Description : Q-7 during welding process, why sinusoidal wave form is converted in to the square wave form?

Last Answer : In sinusoidal wave, we get maximum energy at one point only. So for the more amount of maximum energy we can get by converting the sinusoidal wave form in to the square wave form, and more penetration and deposition rate is achieved due to maximum energy.

Q-6 which innovative welding technique is used by L & T in T joint welding?

Description : Q-6 which innovative welding technique is used by L & T in T joint welding?

Last Answer : In T joint welding backing is required in other side while welding on one side. Flux goes on another side from the root opening and that has to be removed before welding other side. During the ... of the job is also not required by other sources since one side of welding serve the purpose.

Q-5 what is the phenomena behind the overhead welding?

Description : Q-5 what is the phenomena behind the overhead welding?

Last Answer : In overhead welding during welding flux has more fluidity and comes on the surface when the metal is deposited in the root gape. There are different freezing point metal and the flux. so metal have low ... deposit in the root gape and flux have a high freezing point so its deposit on the metal .

Q -4 what is the purpose of sodium, silicon and potassium in core element?

Description : Q -4 what is the purpose of sodium, silicon and potassium in core element?

Last Answer : • Silicon - deoxidize & form slag • Sodium - stabilize arc & form slag • Potassium - stabilizes the arc & form slag

Q-3 Write the energy distribution for different polarity?

Description : Q-3 Write the energy distribution for different polarity?

Last Answer : DCEP – 67% at electrode and 33% at job. • DCEN – 33 % at electrode and 67% at job. • AC – 50 % at electrode and 50% job.

Q-2 what are the functions of electrode covering in SMAW process?

Description : Q-2 what are the functions of electrode covering in SMAW process?

Last Answer : To facilitate arc ignition and give arc stability. To generate gas for shielding the arc & molten metal from air contamination. To de-oxidise the weld metal and flux impurities into the slag. To ... to support the molten weld metal). To control hydrogen contents in the weld. (basic type)

Q-1 what is the function of copper coating in SAW filler wire?

Description : Q-1 what is the function of copper coating in SAW filler wire?

Last Answer : to assure a good electric contact between wire and contact tip • to assure a smooth feed of the wire through the guide tube, feed rolls and contact tip (decrease contact tube wear) • to provide protection against corrosion

at the terminal of a three-phase 6.6Kv alternator a load R=200 ohm is connected between two-phase and the third phase is opened. Z1=z2=5 ohm Zo=2 find out the fault current .

Description : at the terminal of a three-phase 6.6Kv alternator a load R=200 ohm is connected between two-phase and the third phase is opened. Z1=z2=5 ohm Zo=2 find out the fault current .

Last Answer : 32A

The emission of number of photo electrons depends upon a) The colour of the body b) The frequency of incident light c) The intensity of light d) All of the above

Description : The emission of number of photo electrons depends upon a) The colour of the body b) The frequency of incident light c) The intensity of light d) All of the above

Last Answer : c) The intensity of light

Black body radiations depends upon a) The shape and nature of the body b) The velocity of radiations and colour of the body c) The temperature of the body d) All of the above

Description : Black body radiations depends upon a) The shape and nature of the body b) The velocity of radiations and colour of the body c) The temperature of the body d) All of the above

Last Answer : c) The temperature of the body

The output of two inputs OR gate is zero only when: (a) Both are one (b) Both are zero (c) Either input is 1 (d) None

Description : The output of two inputs OR gate is zero only when: (a) Both are one (b) Both are zero (c) Either input is 1 (d) None

Last Answer : (b) Both are zero

Photo diode operates in the _______ condition (a) Forward bias (b) null (c) both a & d (d) reverse bias

Description : Photo diode operates in the _______ condition (a) Forward bias (b) null (c) both a & d (d) reverse bias

Last Answer : (d) reverse bias

In the N-type semiconductor the charge carries are a) Holes b) Neutrons c) Protons d) Electrons

Description : In the N-type semiconductor the charge carries are a) Holes b) Neutrons c) Protons d) Electrons

Last Answer : d) Electrons

In a P-type semiconductor the charge carriers are a) Electrons b) Holes c) Protons d) Neutrons

Description : In a P-type semiconductor the charge carriers are a) Electrons b) Holes c) Protons d) Neutrons

Last Answer : b) Holes

When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Description : When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Last Answer : d) Plasticity

The ratio of shear stress to shear strain is a) Shear modulus b)Young’s Modulus c) Bulk Modulus d)None of above

Description : The ratio of shear stress to shear strain is a) Shear modulus b)Young’s Modulus c) Bulk Modulus d)None of above

Last Answer : b)Young’s Modulus

Which class of material would you classify Nylon a) Fibres b) Polymer c) Ceramics d) Glass

Description : Which class of material would you classify Nylon a) Fibres b) Polymer c) Ceramics d) Glass

Last Answer : b) Polymer

The work is stored in an inductor in form of.......: a. Elastic potential energy b. Kinetic energy c. Potential energy d. Gravitational potential energy

Description : The work is stored in an inductor in form of.......: a. Elastic potential energy b. Kinetic energy c. Potential energy d. Gravitational potential energy

Last Answer : b. Kinetic energy

Sensitivity of a galvanometer can be increased by a) Increasing the number of turns of the coil b) Decreasing the magnetic field c) Increasing the ratio c ⁄BAN d) Decreasing the area of the coil

Description : Sensitivity of a galvanometer can be increased by a) Increasing the number of turns of the coil b) Decreasing the magnetic field c) Increasing the ratio c ⁄BAN d) Decreasing the area of the coil

Last Answer : a) Increasing the number of turns of the coil

Electrical energy is measured in a. watt b. horse power c. kilo watt d. kilowatt hour

Description : Electrical energy is measured in a. watt b. horse power c. kilo watt d. kilowatt hour

Last Answer : d. kilowatt hour

How much heat does a 40 W bulb generates in one hour? a. 144000J b. 144J c. 1.44J d. 14J

Description : How much heat does a 40 W bulb generates in one hour? a. 144000J b. 144J c. 1.44J d. 14J

Last Answer : a. 144000J

One kilowatt hour is the amount of energy delivered during a. one second b. one day c. one minute d. one hour

Description : One kilowatt hour is the amount of energy delivered during a. one second b. one day c. one minute d. one hour

Last Answer : b. one day

When same current passes for same time through a th ick and thin wire a. more heat is produced in thick wire b. more heat is produced in thin wire c. no heat is produced in wire d. less heat is produced in thick wire

Description : When same current passes for same time through a th ick and thin wire a. more heat is produced in thick wire b. more heat is produced in thin wire c. no heat is produced in wire d. less heat is produced in thick wire

Last Answer : More heat is produced in thin wire. Reason:The resistance of a thin wire is greater than the resistance of a thick wire because a thin wire has fewer electrons to carry the current. And higher resistance produces more heat therefore thin wire overheats.