The fractional change in resistance per kelvin is known as, a. temperature coefficient of resistance b. coefficient of Voltage of charge c. thermal expansion d. all of above

The fractional change in resistance per kelvin is known as,
a. temperature coefficient of resistance b. coefficient of Voltage of charge
c. thermal expansion d. all of above
by

1 Answer

Answer :

a. temperature coefficient of resistance
by

Related questions

The temperature at which material show super conductivity is a) Super temperature b) Critical temperature c)Kelvin temperature d)Absolute

Description : The temperature at which material show super conductivity is a) Super temperature b) Critical temperature c)Kelvin temperature d)Absolute

Last Answer : d)Absolute

A rod 3 m long is heated from 10°C to 90°C. Find the expansion of rod. Take Young’s modulus = 1.0 x 10^5 MN/m2 and coefficient of thermal expansion = 0.000012 per degree centigrade. 1. 0.168 cm 2. 0.208 cm 3. 0.288 cm 4. 0.348 cm

Description : A rod 3 m long is heated from 10°C to 90°C. Find the expansion of rod. Take Young’s modulus = 1.0 x 10^5 MN/m2 and coefficient of thermal expansion = 0.000012 per degree centigrade. 1. 0.168 cm 2. 0.208 cm 3. 0.288 cm 4. 0.348 cm

Last Answer : 3. 0.288 cm

First super conductor was discovered by a) Kelvin b) Hertz c)Einstein d) Kamerlingh Ornes

Description : First super conductor was discovered by a) Kelvin b) Hertz c)Einstein d) Kamerlingh Ornes

Last Answer : d) Kamerlingh Ornes

What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Description : What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Last Answer : Joule-Thomson coefficient

Thermistor with high negative temperature coefficient are very accurate for measuring low temperature especially near is a. 10 K b. 70K c. 200K d. 35K

Description : Thermistor with high negative temperature coefficient are very accurate for measuring low temperature especially near is a. 10 K b. 70K c. 200K d. 35K

Last Answer : c. 200K

The emitter of a transistor is doped the heaviest because it: (a) Acts as a supplier of charge carriers (b) Dissipates maximum power c) has a large resistance (d) has a small resistance

Description : The emitter of a transistor is doped the heaviest because it: (a) Acts as a supplier of charge carriers (b) Dissipates maximum power c) has a large resistance (d) has a small resistance

Last Answer : (a) Acts as a supplier of charge carriers

When the potential difference of 4 volt is applied across resistance, 10J energy is converted. Find the charge flows. a. 0.20 C b. 2.5C c. 5C d. 10C

Description : When the potential difference of 4 volt is applied across resistance, 10J energy is converted. Find the charge flows. a. 0.20 C b. 2.5C c. 5C d. 10C

Last Answer : b. 2.5C

Energy stored per unit volume inside the solenoid is called: a. Energy density b. Charge Density c. Mass density d. Volume charge density

Description : Energy stored per unit volume inside the solenoid is called: a. Energy density b. Charge Density c. Mass density d. Volume charge density

Last Answer : energy density is correct

The force per unit charge is called: (a) Electric field (b) Electric field intensity (c) Electric potential energy (d) Electric potential

Description : The force per unit charge is called: (a) Electric field (b) Electric field intensity (c) Electric potential energy (d) Electric potential

Last Answer : b) Electric field intensity

Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Description : Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) ... fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Last Answer : Answer: Option D

What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Description : What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Last Answer : Thermal conductivity

What is an important requisite for fillers in dental composite restorative resins in load bearing areas: A. Sub micro sized particles B. High coefficient of thermal expansion C. High in content (High filler)

Description : What is an important requisite for fillers in dental composite restorative resins in load bearing areas: A. Sub micro sized particles B. High coefficient of thermal expansion C. High in content (High filler)

Last Answer : C. High in content (High filler)

.In regard to the glass of quartz particles of filling restorative resin; the microfill resins tend to have, A. A higher coefficient of thermal expansion and a higher crashing strength B. A higher coefficient of thermal expansion and a lower crashing strength C. A lower coefficient of thermal expansion and a higher crashing strength D. A lower coefficient of thermal expansion and a lower crashing strength

Description : .In regard to the glass of quartz particles of filling restorative resin; the microfill resins tend to have, A. A higher coefficient of thermal expansion and a higher crashing strength B. ... and a higher crashing strength D. A lower coefficient of thermal expansion and a lower crashing strength

Last Answer : B. A higher coefficient of thermal expansion and a lower crashing strength

Manganese steels (A) Are non-magnetic (B) Possess high electrical resistance (C) Possess low coefficient of expansion (D) All the above

Description : Manganese steels (A) Are non-magnetic (B) Possess high electrical resistance (C) Possess low coefficient of expansion (D) All the above

Last Answer : Answer: Option D

What happens to resistance of conductors when temperature rises?

Description : What happens to resistance of conductors when temperature rises?

Last Answer : For conductors an increase in temperature will cause their resistance to increase.

Resistance of a wire on increasing its temperature will a. increase with rise in temperature b. decrease with rise in temperature c. will remain same d. depends upon altitude of experimentation

Description : Resistance of a wire on increasing its temperature will a. increase with rise in temperature b. decrease with rise in temperature c. will remain same d. depends upon altitude of experimentation

Last Answer : a. increase with rise in temperature

Devices which convert various physical quantities into electrical voltage are known as (a) Control system (b) sensors (c) level sensors (d) LDR

Description : Devices which convert various physical quantities into electrical voltage are known as (a) Control system (b) sensors (c) level sensors (d) LDR

Last Answer : (b) sensors

A circuit which develops voltage across the horizontal deflection plates is known as a) Time base generator b) Electron gun c) Thermionic diode d) Zener diode

Description : A circuit which develops voltage across the horizontal deflection plates is known as a) Time base generator b) Electron gun c) Thermionic diode d) Zener diode

Last Answer : a) Time base generator

How does a thermal overload relay work?

Description : How does a thermal overload relay work?

Last Answer : The bi-metallic strip in the relay heats up by the over load current and the movement in the bi-metallic strip causes the breaker to trip. The breaker has to be reset (turn off) before turning on ... delay for the bi-metallic strip to cool down after which the breaker can be reset and switched on.

If energy of incident photon is greater than the rest mass energy of electron positron pair, the surplus energy is shared by the pair as, a) Potential energy b) Thermal energy c) Electronic energy d) Kinetic energy

Description : If energy of incident photon is greater than the rest mass energy of electron positron pair, the surplus energy is shared by the pair as, a) Potential energy b) Thermal energy c) Electronic energy d) Kinetic energy

Last Answer : d) Kinetic energy

The change in physical size of a substance when its temperature changes.  a. intensive property  b. extensive property  c. volume expansion  d. thermal expansion

Description : The change in physical size of a substance when its temperature changes.  a. intensive property  b. extensive property  c. volume expansion  d. thermal expansion

Last Answer : thermal expansion

Which one of the following quantities is conserved in pair production? a) Energy b) Charge c) Linear momentum d) All

Description : Which one of the following quantities is conserved in pair production? a) Energy b) Charge c) Linear momentum d) All

Last Answer : d) All

Which one of the following physical quantities is independent of relativistic speed? a) Mass b) Length c) Time d) Charge

Description : Which one of the following physical quantities is independent of relativistic speed? a) Mass b) Length c) Time d) Charge

Last Answer : d) Charge

Depletion region carries _________ (a) +ve charge (b) –ve charge (c) no charge (d) all of above

Description : Depletion region carries _________ (a) +ve charge (b) –ve charge (c) no charge (d) all of above

Last Answer : (c) no charge

N-type region has majority charge carriers as (a) Holes (b) protons (c) neutrons (d) electrons

Description : N-type region has majority charge carriers as (a) Holes (b) protons (c) neutrons (d) electrons

Last Answer : (d) electrons

An ideal transformer always obeys the law of conservation of........: a. energy b. momentum c. charge d. Flux

Description : An ideal transformer always obeys the law of conservation of........: a. energy b. momentum c. charge d. Flux

Last Answer : b. momentum

Lenz’s law is in accordance with the law of conservation of: a. momentum b. Angular momentum c. charge d. energy

Description : Lenz’s law is in accordance with the law of conservation of: a. momentum b. Angular momentum c. charge d. energy

Last Answer : a. momentum

A proton having mass m and charge q is projected into a region having a perpendicular magnetic field. The angle of deviation of proton when it comes out of the region with mv √2 qB ⁄ is a) π/3 b) π/4 c) π/6 d) 2 π/3

Description : A proton having mass m and charge q is projected into a region having a perpendicular magnetic field. The angle of deviation of proton when it comes out of the region with mv √2 qB ⁄ is a) π/3 b) π/4 c) π/6 d) 2 π/3

Last Answer : b) π/4

Kirchhoff 1st law is is manifestation of a. law of conservation of mass b. law of conservation of charge c. law of conservation of energy d. none

Description : Kirchhoff 1st law is is manifestation of a. law of conservation of mass b. law of conservation of charge c. law of conservation of energy d. none

Last Answer : b. law of conservation of charge

If 1 ampere current flows through 2m long conductor the charge flow through it in 1 hour will be a. 3600C b. 7200C c. 1C d. 2C

Description : If 1 ampere current flows through 2m long conductor the charge flow through it in 1 hour will be a. 3600C b. 7200C c. 1C d. 2C

Last Answer : a. 3600C

The electric intensity at a distance of 1m from the point charge is 1μC is: (a) 9 × 109 N/C (b) 9 × 106 N/C (c) 9 × 103 N/C (d) 9 N/C

Description : The electric intensity at a distance of 1m from the point charge is 1μC is: (a) 9 × 109 N/C (b) 9 × 106 N/C (c) 9 × 103 N/C (d) 9 N/C

Last Answer : c) 9 × 103 N/C

A charge of 2 coulomb is in a field of intensity 2 N/C. The force on charge is: (a) 4 π N (b) 4 N (c) 0 N (d) 1 N

Description : A charge of 2 coulomb is in a field of intensity 2 N/C. The force on charge is: (a) 4 π N (b) 4 N (c) 0 N (d) 1 N

Last Answer : b) 4 N

The electric field exist around: (a) Charges (b) On the left side (c) At the –ve charge (d) At the +ve charge

Description : The electric field exist around: (a) Charges (b) On the left side (c) At the –ve charge (d) At the +ve charge

Last Answer : (a) Charges

The space around the charge within which other charges are influenced by it is called: (a) Electric field (b) Magnetic field (c) Electric flux (d) Electric intensity

Description : The space around the charge within which other charges are influenced by it is called: (a) Electric field (b) Magnetic field (c) Electric flux (d) Electric intensity

Last Answer : a) Electric field

An inkjet printer uses in its operation: (a) Positrons (b) Neutrons (c) An electric charge (d) Photons

Description : An inkjet printer uses in its operation: (a) Positrons (b) Neutrons (c) An electric charge (d) Photons

Last Answer : (c) An electric charge

The SI unit of charge is: (a) Meter (b) Ampere (c) Coulomb (d) Volt

Description : The SI unit of charge is: (a) Meter (b) Ampere (c) Coulomb (d) Volt

Last Answer : (c) Coulomb

When current of one ampere is flowing across any cross-section of wire in one second, then the quantity of charge is said to be: (a) One coulomb (b) Three coulomb (c) One micro-coulomb (d) None of above

Description : When current of one ampere is flowing across any cross-section of wire in one second, then the quantity of charge is said to be: (a) One coulomb (b) Three coulomb (c) One micro-coulomb (d) None of above

Last Answer : (a) One coulomb

The minimum charge on any electron be less than: (a) 1.6×10−19C (b) 3.2×10−19C (c) 1.8×10−19C (d) 9.1×10−19C

Description : The minimum charge on any electron be less than: (a) 1.6×10−19C (b) 3.2×10−19C (c) 1.8×10−19C (d) 9.1×10−19C

Last Answer : (a) 1.6×10−19C

If the distance between the two charge bodies is halved, the force between them becomes: (a) Half (b) Four time (c) One fourth (d) Doubled

Description : If the distance between the two charge bodies is halved, the force between them becomes: (a) Half (b) Four time (c) One fourth (d) Doubled

Last Answer : (c) One fourth

A substance contains: (a) Only positive charge (b) Only negative charge (c) Both +ve and −ve charge (d) None of above

Description : A substance contains: (a) Only positive charge (b) Only negative charge (c) Both +ve and −ve charge (d) None of above

Last Answer : (c) Both +ve and −ve charge

A charge of 10μC and 14.4 μC are 12 cm apart, the force between them is: (a) 9 × 105 N (b) 9 × 107 N (c) 90 N (d) 108 × 107 N

Description : A charge of 10μC and 14.4 μC are 12 cm apart, the force between them is: (a) 9 × 105 N (b) 9 × 107 N (c) 90 N (d) 108 × 107 N

Last Answer : (c) 90 N

The number of electrons in one coulomb charge is equal to: (a) 6.2 × 1018 electrons (b) Zero electrons (c) 1.6 × 10−22 electrons (d) 6.2 × 1021 electrons

Description : The number of electrons in one coulomb charge is equal to: (a) 6.2 × 1018 electrons (b) Zero electrons (c) 1.6 × 10−22 electrons (d) 6.2 × 1021 electrons

Last Answer : (a) 6.2 × 1018 electrons

The SI unit of charge is: (a) Coulomb (b) Calorie (c) Ampere (d) Joule

Description : The SI unit of charge is: (a) Coulomb (b) Calorie (c) Ampere (d) Joule

Last Answer : a) Coulomb

Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

Superior quality laboratory apparatus is made of the __________ glass having low thermal co-efficient of expansion & high chemical resistance. (A) Flint (B) Soda (C) Pyrex (D) Potash

Description : Superior quality laboratory apparatus is made of the __________ glass having low thermal co-efficient of expansion & high chemical resistance. (A) Flint (B) Soda (C) Pyrex (D) Potash

Last Answer : (C) Pyrex

When hot liquid is poured into a thick glass tumbler, it cracks because glass – (1) is a bad conductor of heat so only inner surface expands (2) has high temperature coefficient of expansion (3) has a very low specific heat (4) has low temperature coefficient of expansion

Description : When hot liquid is poured into a thick glass tumbler, it cracks because glass – (1) is a bad conductor of heat so only inner surface expands (2) has high temperature coefficient of expansion (3) has a very low specific heat (4) has low temperature coefficient of expansion

Last Answer : (1) is a bad conductor of heat so only inner surface expands Explanation: When hot liquid is poured into a thick glass tumbler, it cracks because glass is a bad conductor of heat so only inner surface expands.

When hot liquid is poured into a thick glass tumbler, it cracks because glass : (1) is a bad conductor of heat so only inner surface expands (2) has high temperature coefficient of expansion (3) has a very low specific heat (4) has low temperature coefficient of expansion

Description : When hot liquid is poured into a thick glass tumbler, it cracks because glass : (1) is a bad conductor of heat so only inner surface expands (2) has high temperature coefficient of expansion (3) has a very low specific heat (4) has low temperature coefficient of expansion

Last Answer :  is a bad conductor of heat so only inner surface expands 

The resistance of a bulb filmanet is `100Omega` at a temperature of `100^@C`. If its temperature coefficient of resistance be 0.005 per `.^@C`, its re

Description : The resistance of a bulb filmanet is `100Omega` at a temperature of `100^@C`. If its temperature coefficient of resistance be 0.005 per `.^@C`, its re

Last Answer : The resistance of a bulb filmanet is `100Omega` at a temperature of `100^@C`. If its temperature coefficient of ... . `200^(@)C` D. `400^(@)C`

Which statement of the second law of thermodynamics states that no heat engine can have a thermal efficiency of 100 percent?  A. Kelvin-Planck statement  B. Clausius statement  C. Kevin statement  D. Rankine statement

Description : Which statement of the second law of thermodynamics states that no heat engine can have a thermal efficiency of 100 percent?  A. Kelvin-Planck statement  B. Clausius statement  C. Kevin statement  D. Rankine statement

Last Answer : Kelvin-Planck statement

When two bodies are in thermal equilibrium with a third body, they are also in thermal equilibrium with each other. This statement is called  A. Zeroth law of thermodynamics  B. First law of thermodynamics  C. Second law of thermodynamics  D. Kelvin Planck’s law

Description : When two bodies are in thermal equilibrium with a third body, they are also in thermal equilibrium with each other. This statement is called  A. Zeroth law of thermodynamics  B. First law of thermodynamics  C. Second law of thermodynamics  D. Kelvin Planck’s law

Last Answer : A. Zeroth law of thermodynamics