A drawn wire of resistance 5 Q is further drawn so that its diameter becomes one-fifth of the original. ...

A drawn wire of resistance 5 Ω is further drawn so that its diameter becomes one-fifth of the original. What is its resistance with volume remaining the same ? (a) 25 Ω (b) 125 Ω (c) 625 Ω (d) 3125 Ω

by

1 Answer

Answer :

A drawn wire of resistance 5 Ω is further drawn so that its diameter becomes one-fifth of the original. What is its resistance with volume remaining the same ? (a) 25 Ω (b) 125 Ω (c) 625 Ω (d) 3125 Ω

by

Related questions

A wire of resistance `10 Omega` is drawn out so that its length is thrice its original length. Calculate its new resistance (resistivity and density o

Description : A wire of resistance `10 Omega` is drawn out so that its length is thrice its original length. Calculate its new resistance (resistivity and density o

Last Answer : A wire of resistance `10 Omega` is drawn out so that its length is thrice its original ... (resistivity and density of the material remain uncharged).

A wire of resistance `48 Omega` is uniformly stretched until its new length becomes 4 times the original length. Find its new resistance.

Description : A wire of resistance `48 Omega` is uniformly stretched until its new length becomes 4 times the original length. Find its new resistance.

Last Answer : A wire of resistance `48 Omega` is uniformly stretched until its new length becomes 4 times the original length. Find its new resistance.

A container contains a mixture of two liquids P and Q in the ratio 7 : 5. When 9 litres of mixture are drawn off and the container is filled with Q, the ratio of P and Q becomes 7 : 9. How many litres of liquid P was contained in the container initially? a) 12 b) 21 c) 93 d)17 e) None

Description : A container contains a mixture of two liquids P and Q in the ratio 7 : 5. When 9 litres of mixture are drawn off and the container is filled with Q, the ratio of P and Q becomes 7 : 9. How many litres of liquid P was contained in the container initially? a) 12 b) 21 c) 93 d)17 e) None 

Last Answer : B Let initial quantity of P in the container be 7x and initial quantity of Q in the container be 5x Now 9 litres of mixture is drawn off from the container. Quantity of P in 9 litres of the mixture drawn off ... = 7 : 9 x=16* 21/4*28 Litres of P contained in the container initially =7x = 21

What is the resistance of a 160 m wire with a uniform diameter of 0.28 mm, if the specific resistance is

Description : What is the resistance of a 160 m wire with a uniform diameter of 0.28 mm, if the specific resistance is 12.32 μΩ-cm? A) 3.2 Ω B) 3.2 μΩ C) 0.8 Ω D) None of these

Last Answer : What is the resistance of a 160 m wire with a uniform diameter of 0.28 mm, if the specific resistance is 12.32 μΩ-cm? A) 3.2 Ω B) 3.2 μΩ C) 0.8 Ω D) None of these

A wire of 0.14 mm diameter and specific resistance 9.6 micro ohm-cm is 440 cm long. The resistance of the wire will be

Last Answer : A wire of 0.14 mm diameter and specific resistance 9.6 micro-ohm-cm is 440 cm long. The resistance of the wire will be 27.4 ohm.

`1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Description : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Last Answer : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

The arrow drawn through the resistor shown in the illustration indicates that it is _____________. EL-0086 A. for use in low power applications B. a carbon composition type C. a wire-wound type D. one whose resistance is variable

Description : The arrow drawn through the resistor shown in the illustration indicates that it is _____________. EL-0086 A. for use in low power applications B. a carbon composition type C. a wire-wound type D. one whose resistance is variable

Last Answer : Answer: D

If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Description : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Last Answer : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes 0.4 ohm.

Assertion : A resistance wire is broken into four pices and all are connected in parallel. Then, net resistance becomes 1/16 times. Reason : In parall

Description : Assertion : A resistance wire is broken into four pices and all are connected in parallel. Then, net resistance becomes 1/16 times. Reason : In parall

Last Answer : Assertion : A resistance wire is broken into four pices and all are connected in parallel. Then, net ... D. If Assertion is false but Reason is true.

Two resistances are joined in parallel whose resultant is `6//8 ohm`. One of the resistance wire is broken and the effective resistance becomes `2 Ome

Description : Two resistances are joined in parallel whose resultant is `6//8 ohm`. One of the resistance wire is broken and the effective resistance becomes `2 Ome

Last Answer : Two resistances are joined in parallel whose resultant is `6//8 ohm`. One of the resistance wire is broken and the ... /5` B. 2 C. `6//5` D. 3

A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Last Answer : a. remains the same

What will be the change in resistance of a constantan wire when its radius is made half and length reduced to one-fourth of its original length ?

Description : What will be the change in resistance of a constantan wire when its radius is made half and length reduced to one-fourth of its original length ?

Last Answer : What will be the change in resistance of a constantan wire when its radius is made half and length reduced to one-fourth of its original length ?

A wire of resistance `4 Omega` is stretched to twice its original length. The resistance of stretched wire would be

Description : A wire of resistance `4 Omega` is stretched to twice its original length. The resistance of stretched wire would be

Last Answer : A wire of resistance `4 Omega` is stretched to twice its original length. The resistance of stretched wire would ... Omega` C. `8 Omega` D. `16 Omega`

A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area of cross-section gets halved. Now, th

Description : A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area of cross-section gets halved. Now, th

Last Answer : A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area ... Omega` C. `1 Omega` D. `4 Omega`

A wire is being used as a replacement having twice the length and one-half the cross-sectional area of the original wire. The resistance of this new wire, when compared to that of the original wire, is _____________. A. four times as great B. twice as much C. the same as the original resistance D. one-half of the original resistance

Description : A wire is being used as a replacement having twice the length and one-half the cross-sectional area of the original wire. The resistance of this new wire, when compared to that of the original wire, ... B. twice as much C. the same as the original resistance D. one-half of the original resistance

Last Answer : Answer: A

A replacement wire having twice the length and one-half the cross-sectional area of the original wire will have a resistance that is _____________. A. four times that of the original wire B. twice that of the original wire C. the same as that of the original wire D. one-half that of the original wire

Description : A replacement wire having twice the length and one-half the cross-sectional area of the original wire will have a resistance that is _____________. A. four times that of the original wire B. twice that of ... wire C. the same as that of the original wire D. one-half that of the original wire

Last Answer : Answer: A

The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of diameter 0.2 mm at `100^(@)C`, if the res

Description : The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of diameter 0.2 mm at `100^(@)C`, if the res

Last Answer : The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of ... `0^(@)C` is `1.7xx10^(-8) Omega` m.

The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Description : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Last Answer : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

What length of a wire of diameter 0.46 mm and specific resistance `50xx10^(-6) Omega`m would be required to make a coil of resistance `10 Omega` ?

Description : What length of a wire of diameter 0.46 mm and specific resistance `50xx10^(-6) Omega`m would be required to make a coil of resistance `10 Omega` ?

Last Answer : What length of a wire of diameter 0.46 mm and specific resistance `50xx10^(-6) Omega`m would be required to make a coil of resistance `10 Omega` ?

A 1m long wire of diameter `0.31mm` has a resistance of `4.2 Omega`. If it is replaced by another wire of same material of length `1.5m` and diameter

Description : A 1m long wire of diameter `0.31mm` has a resistance of `4.2 Omega`. If it is replaced by another wire of same material of length `1.5m` and diameter

Last Answer : A 1m long wire of diameter `0.31mm` has a resistance of `4.2 Omega`. If it is replaced by another wire of ... 6 Omega` C. `26.7 Omega` D. `0.8 Omega`

A wire has resistance `12 Omega`. It is bent in the form of a circle. The effective resistance between two points across a diameter is.

Description : A wire has resistance `12 Omega`. It is bent in the form of a circle. The effective resistance between two points across a diameter is.

Last Answer : A wire has resistance `12 Omega`. It is bent in the form of a circle. The effective resistance between two ... ` B. `6Omega` C. `3Omega` D. `24Omega`

What is the diameter of a copper wire to be used in a 16 km loop with a dc loop resistance of 100 ohms/km? A. 0.108 cm B. 1.082 cm C. 0.017 cm D. 0.0465 cm

Description : What is the diameter of a copper wire to be used in a 16 km loop with a dc loop resistance of 100 ohms/km? A. 0.108 cm B. 1.082 cm C. 0.017 cm D. 0.0465 cm

Last Answer : D. 0.0465 cm

A solution containing 30 g of non-volatile solute exactly in 90 g of water has a vapour pressure of 2.8 kPa at 298 K. Further 18 g of water is added to this solution. The new vapour pressure becomes 2.9 kPa at 298 K. Calculate (i) the molecular mass of solute and (ii) vapour pressure of water at 298 K -Chemistry

Description : A solution containing 30 g of non-volatile solute exactly in 90 g of water has a vapour pressure of 2.8 kPa at 298 K. Further 18 g of water is added to this solution. The new vapour pressure ... K. Calculate (i) the molecular mass of solute and (ii) vapour pressure of water at 298 K -Chemistry

Last Answer : For a very dilute solution ∴ Molecular mass, MB = 34 g/mol.

Dew point can be best defined as the: a. Absolute temperature at which air, upon heating, will evaporate moisture b. . Percentage of moisture that air can hold at a given temperature and pressure c. . Temperature that air will begin to evaporate moisture d. . Temperature at which air, upon cooling, becomes saturated, causing moisture to condense should the temperature drop further e. . Atmospheric pressure at which air will condense moisture

Description : Dew point can be best defined as the: a. Absolute temperature at which air, upon heating, will evaporate moisture b. . Percentage of moisture that air can hold at a given temperature ... to condense should the temperature drop further e. . Atmospheric pressure at which air will condense moisture

Last Answer : Answer: D

In an oil-lubricated journal bearing, coefficient of friction between the journal and the bearing. [IES-1995] (a) Remains constant at all speeds. (b) is minimum at zero speed and increases monotonically with increase in speed. (c) is maximum at zero speed and decreases monotonically with increase in speed. (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Description : In an oil-lubricated journal bearing, coefficient of friction between the journal and the bearing. [IES-1995] (a) Remains constant at all speeds. (b) is minimum at zero speed and increases ... speed. (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Last Answer : (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Hypersecretion of growth hormone in adults does not cause further increase in height, because (a) epiphyseal plates close after adolescence (b) bones loose their sensitivity to growth hormone in adults (c) muscle fibres do not grow in size after birth (d) growth hormone becomes inactive in adults.

Description : Hypersecretion of growth hormone in adults does not cause further increase in height, because (a) epiphyseal plates close after adolescence (b) bones loose their sensitivity to growth hormone in adults (c) muscle fibres do not grow in size after birth (d) growth hormone becomes inactive in adults.

Last Answer : (a) epiphyseal plates close after adolescence

The thermosetting plastic (A) Becomes rigid when moulded at suitable pressure and temperature (B) At 127°C to 177°C permanently set and further application of heat does not soften it (C) Chars at 343°C (D) All the above

Description : The thermosetting plastic (A) Becomes rigid when moulded at suitable pressure and temperature (B) At 127°C to 177°C permanently set and further application of heat does not soften it (C) Chars at 343°C (D) All the above

Last Answer : Answer: Option D

Hypersecretion of Growth Hormone in adults does not cause further increase in height, because: (1) Epiphyseal plates close after adolescence. (2) Bones loose their sensitivity to Growth Hormone in adults. (3) Muscle fibres do not grow in size after birth. (4) Growth Hormone becomes inactive in adults.

Description : Hypersecretion of Growth Hormone in adults does not cause further increase in height, because: (1) Epiphyseal plates close after adolescence. (2) Bones loose their sensitivity to Growth Hormone in adults. ( ... fibres do not grow in size after birth. (4) Growth Hormone becomes inactive in adults.

Last Answer : (1) Epiphyseal plates close after adolescence.

One-fifth of a number is equal to 5/8th of another number. If 35 is added to the first number, it becomes four times of the second number. Find the second number. 1. 39 2. 70 3. 40 4. 25 5. None of these

Description : One-fifth of a number is equal to 5/8th of another number. If 35 is added to the first number, it becomes four times of the second number. Find the second number. 1. 39 2. 70 3. 40 4. 25 5. None of these

Last Answer : Answer- 3(40) Explanation:- (1/5)x =(5/8)y………..1 if 35 is added to first no. , x + 35= 4y so,x= 4y -35 put in eq 1… (1/5)( 4y-35) = (5/8)y y=40 =second number

Let us consider that the original point is (x,y) and new transformed point is (x’,y’). Further, Shx and Shy are shearing factors in x and y directions. If we perform the y-direction shear relative to x=xref then the transformed point is given by ............

Description : Let us consider that the original point is (x,y) and new transformed point is (x’,y’). Further, Shx and Shy are shearing factors in x and y directions. If we perform the y-direction shear relative to x=xref then the transformed point is given by ............ 

Last Answer : (C) x’ = x y’ = Shy(x - xref) + y

ABCD is a parallelogram. A circle through A, B is so drawn that it intersects AD at P and BC at Q. -Maths 9th

Description : ABCD is a parallelogram. A circle through A, B is so drawn that it intersects AD at P and BC at Q. -Maths 9th

Last Answer : Given ABCD is a parallelogram. A circle whose centre O passes through A, B is so drawn that it intersect AD at P and BC at Q To prove Points P, Q, C and D are con-cyclic. Construction Join PQ ... Thus, the quadrilateral QCDP is cyclic. So, the points P, Q, C and D are con-cyclic. Hence proved.

ABCD is a parallelogram. A circle through A, B is so drawn that it intersects AD at P and BC at Q. -Maths 9th

Description : ABCD is a parallelogram. A circle through A, B is so drawn that it intersects AD at P and BC at Q. -Maths 9th

Last Answer : Given ABCD is a parallelogram. A circle whose centre O passes through A, B is so drawn that it intersect AD at P and BC at Q To prove Points P, Q, C and D are con-cyclic. Construction Join PQ ... Thus, the quadrilateral QCDP is cyclic. So, the points P, Q, C and D are con-cyclic. Hence proved.

Two congruent circles intersect each other at point A and B.Through A any line segment PAQ is drawn so that P,Q lie on the two circles.Prove that BP = BQ. -Maths 9th

Description : Two congruent circles intersect each other at point A and B.Through A any line segment PAQ is drawn so that P,Q lie on the two circles.Prove that BP = BQ. -Maths 9th

Last Answer : Solution :- Let, O and O' be the centres of two congruent circles. As, AB is the common chord of these circles. ∴ ACB = ADB As congruent arcs subtent equal angles at the centre. ∠AOB = ∠AO'B ⇒ 1/2∠AOB = 1/2∠AO'B ⇒ ∠BPA = ∠BQA ⇒ BP = BQ (Sides opposite to equal angles)

A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 Mpa. It is further subjected to a torque of 10 kNm. The maximum principal stress experienced on the shaft is closest to (a) 41Mpa (b) 82 Mpa (c) 164 Mpa (d) 204 Mpa

Description : A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 Mpa. It is further subjected to a torque of 10 kNm. The maximum principal stress experienced on the shaft is closest to (a) 41Mpa (b) 82 Mpa (c) 164 Mpa (d) 204 Mpa

Last Answer : (b) 82 Mpa

P, Q, R, S and T are placed in the order of 1 to 5. S is at one of the extreme ends. Q and R are neighbors and T is 3rd to the right of P If Q is in the third position then who will be in fifth position? a) Both S and T b) Either P or Q c) Either S or T d) Both P and Q

Description : P, Q, R, S and T are placed in the order of 1 to 5. S is at one of the extreme ends. Q and R are neighbors and T is 3rd to the right of P If Q is in the third position then who will be in fifth position? a) Both S and T b) Either P or Q c) Either S or T d) Both P and Q

Last Answer : c) Either S or T

The diameter of internal flue tubes of a Lancashire boiler is about _______ that of it’s shell a. One fourth b. One third c. Two fifth d. One half

Description : The diameter of internal flue tubes of a Lancashire boiler is about _______ that of it’s shell a. One fourth b. One third c. Two fifth d. One half

Last Answer : c. Two fifth

Pick out the wrong statement. (A) Tin can be readily and very easily drawn into very fine wire (B) Tin can be severely cold worked without the necessity of annealing due to its low recrystallisation temperature (C) Tin exists in two allotropic forms

Description : Pick out the wrong statement. (A) Tin can be readily and very easily drawn into very fine wire (B) Tin can be severely cold worked without the necessity of annealing due to its low recrystallisation temperature (C) Tin exists in two allotropic forms

Last Answer : (A) Tin can be readily and very easily drawn into very fine wire

Q: What is three-fifth of 50? -General Knowledge

Description : Q: What is three-fifth of 50? -General Knowledge

Last Answer : ⅗ of 50 is 30

Among 3 persons, P, Q, R the profit of R is equal to two-fifth of the sum of one-third profit of P and onethird of Q. If at the end of the year total profit is Rs 12750, then find the average profit of P and Q? A) 4750 B) 5625 C) 7425 D) 6520

Description : Among 3 persons, P, Q, R the profit of R is equal to two-fifth of the sum of one-third profit of P and onethird of Q. If at the end of the year total profit is Rs 12750, then find the average profit of P and Q? A) 4750 B) 5625 C) 7425 D) 6520

Last Answer : Answer: B)  R=2/5(1/3 P+1/3 Q)  15R=2(P+Q)  R/(P+Q)= 2/15  Take R=2x, P+Q=15x  Total profit =15x+2x =12750  =>X=Rs.750  Average profit of P&Q =750/2 *15=5625

Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the fifth stick on the side to which the tree should fall. During construction of a dam, a tree 18 inches in diameter was completely covered by water. Since the treetop was fouling the boat's propellers, it had to be cut down. A diver went down and put a stick of dynamite on the four sides of the tree. Since the current is flowing south at 2 knots per hour, on which side of the tree would you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Description : Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the ... you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Last Answer : It doesn't matter where the fifth stick is placed, since the tree won't fall in any direction. Being wood, it will float and rise to the surface.

Baffle spacing (A) Is not the same as baffle pitch (B) Should be less than one fifth the diameter of the shell (C) Should be less than the inside diameter of the shell (D) None of these

Description : Baffle spacing (A) Is not the same as baffle pitch (B) Should be less than one fifth the diameter of the shell (C) Should be less than the inside diameter of the shell (D) None of these

Last Answer : (C) Should be less than the inside diameter of the shell

power of absorbing type hydraulic dynamometer varies as a) cube of rpm b) fifth power of the diameter c) none of the above d) both (a) and (b)

Description : power of absorbing type hydraulic dynamometer varies as a) cube of rpm b) fifth power of the diameter c) none of the above d) both (a) and (b)

Last Answer : d) both (a) and (b)

For a given application rate the number of droplet is inversely proportional to............of the diameter of droplets. A) Square b) cube C) one fifth d) none of the above

Description : For a given application rate the number of droplet is inversely proportional to............of the diameter of droplets. A) Square b) cube C) one fifth d) none of the above

Last Answer : b) cube

What is the diameter of the GI pipe through which the earth wire needs to be taken out?

Description : What is the diameter of the GI pipe through which the earth wire needs to be taken out?

Last Answer : 13 mm diameter is the diameter of the GI pipe through which the earth wire needs to be taken out.

A copper wire of length l and diameter d has potential difference V...

Description :  A copper wire of length l and diameter d has potential difference V applied at its two ends. The drift velocity is vd . If the diameter of wire is made d/3, then drift velocity becomes

Last Answer :  A copper wire of length l and diameter d has potential difference V applied at its two ends. The drift velocity is vd . If the diameter of wire is made d/3, then drift velocity becomes vd.

What are the sources of transverse vibration of a drawn wire ?

Description : What are the sources of transverse vibration of a drawn wire ?

Last Answer : 1. Length formula: If the tension of a vibrating wire and the mass of a single length remain unchanged , the frequency of the wire is disproportionate to the length. 2. Tension formula: If the ... , the frequency of the wire is disproportionate to the square root of the mass of a single length.

When Metal is drawn out into a wire is it a chemical change or physical change?

Description : When Metal is drawn out into a wire is it a chemical change or physical change?

Last Answer : Need answer

Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Description : Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Last Answer : Ans:(d)

In trapezium ABCD, AB || DC and L is the mid-point of BC. Through L, a line PQ || AD has been drawn which meets AB in P and DC produced in Q. -Maths 9th

Description : In trapezium ABCD, AB || DC and L is the mid-point of BC. Through L, a line PQ || AD has been drawn which meets AB in P and DC produced in Q. -Maths 9th

Last Answer : According to question prove that ar (ABCD) = ar (APQD).