Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C
Last Answer : B) Baud
Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) BaudC) Bits per second D) Both B and C
Description : What is the commonly used unit for measuring the speed of data transmission ? (1) Mega Hertz (2) Characters per second (3) Bits per second (4) Nano seconds
Last Answer : Bits per second
Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps
Last Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps
Description : What is the commonly used unit for measuring the sped of data transmission? 1) Bits per second 2) Nano seconds 3) Characters per second 4) Mega Hertz
Last Answer : 1) Bits per second
Description : The baud rate of a signal is 600 baud/second. If each signal unit carries 6 bits, then the bit rate of a signal is ................. (A) 3600 (B) 100 (C) 6/600 (D) None of the above
Last Answer : (A) 3600
Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200
Last Answer : b. 800
Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes
Last Answer : b. 12,000 bytes
Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above
Last Answer : (B) 3 bits/baud
Description : In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps
Last Answer : (C) 1000 bps
Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000
Last Answer : d. 20000
Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ............... (A) 64 Kbps (B) 32 Mbps (C) 32 Kbps (D) 64 Mbps
Last Answer : (C) 32 Kbps
Description : What is the commonly used unit for measuring the speed of data transmission? -Do You Know?
Last Answer : answer:
Description : What is the commonly used unit for measuring the speed of data transmission
Description : 1. If the current in the core decreases, what will the strength of the magnetic field be? 2. What is the commonly used unit for measuring the speed of data transmission? 3. The Govt. of ... flows between the Vindhya and Satpura ranges? 20. Which was a journal brought out by Abul Kalam Azad ?
Last Answer : Answer : 1. Decreases 2. Bits per second 3. Jeevan Sathi Yojana 4. Because warm and cold currents meet 5. Ranga II 6. Fatty tissue 7. Uttar Pradesh 8. Oil gas 9. Silvassa 10. Hunter 11. Sports ... 16. Speaker 17. Because of inadequate supply of air 18. Growth of GNP 19. Narmada 20. Al -Hilal
Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500
Last Answer : a. 2500
Description : A memory management system has 64 pages with 512 bytes page size. Physical memory consists of 32 page frames. Number of bits required in logical and physical address are respectively: (1) 14 and 15 (2) 14 and 29 (3) 15 and 14 (4) 16 and 32
Last Answer : (3) 15 and 14
Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is ............... (A) 400 bps (B) 800 bps (C) 1600 bps (D) 3200 bps
Last Answer : (D) 3200 bps Answer: D Explanation: The multiplexer is shown in the Figure. Each frame carries 1 byte from each channel; the size of each frame, therefore, is 4 bytes, or 32 bits. Because each ... channel, the frame rate must be 100 frames per second. The bit rate is 100 32 = 3200 bps.
Description : Speed of processor chip is measured in (1) Mbps (2) MHz (2) Bits/second (4) Bytes/second
Last Answer : MHz
Description : Consider a source computer(S) transmitting a file of size 106 bits to a destination computer (D)over a network of two routers (R1 and R2) and three links(L1, L2, and L3). L1connects S to R1; L2 connects R1 to ... file from S to D? a. 1005 ms b. 1010 ms c. 3000 ms d. 3003 ms Answer: Option(a)
Last Answer : a. 1005 ms
Description : What is the unit used to measure the data wf is transmitted through modem? (a) Bytes per second (b) Band -Technology
Last Answer : (c) Bits per second is the unit used to measure the data through modem.
Description : What is the baud rate of the standard 10 Mbps Ethernet ? (A) 10 megabaud (B) 20 megabaud (C) 30 megabaud (D) 40 megabaud
Last Answer : (B) 20 megabaud
Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps
Last Answer : C. 320 bps
Description : Consider a disk with 16384 bytes per track having a rotation time of 16 msec and average seek time of 40 msec. What is the time in msec to read a block of 1024 bytes from this disk? (A) 57 msec (B) 49 msec (C) 48 msec (D) 17 msec
Last Answer : Answer: B
Description : A memory unit stores 2^16 bytes in 32-bit words. How many address bits are necessary in order to retrieve a single word from this memory unit?
Last Answer : Each word is 4 bytes, which occupies 4 consecutive addresses at 16 bits each. The first 14 bits of these addresses will be the same, differing only in the two least significant bits. You only need to specify the first 14 bits, because there are only 2^14 words occupying those 2^16 bytes.
Description : Consider a 32 - bit microprocessor, with a 16 - bit external data bus, driven by an 8 MHz input clock. Assume that the microprocessor has a bus cycle whose minimum duration equals four input clock cycles. What ... (A) 8x106 bytes/sec (B) 4x106 bytes/sec (C) 16x106 bytes/sec (D) 4x109 bytes/sec
Last Answer : (B) 4x106 bytes/sec
Description : Suppose that the time to do a null remote procedure call (RPC) (i.e, 0 data bytes) is 1.0 msec, with an additional 1.5 msec for every 1K of data. How long does it take to read 32 K from the file server as 32 1K RPCs? (A) 49 msec (B) 80 msec (C) 48 msec (D) 100 msec
Last Answer : (B) 80 msec
Description : Which of the following information about the UNIX file system is not correct? (A) Super block contains the number of i-nodes, the number of disk blocks, and the start of the list of free disk blocks. (B ... Each i-node is 256-bytes long. (D) All the files and directories are stored in data blocks.
Last Answer : (C) Each i-node is 256-bytes long.
Description : The maximum size of the data that the application layer can pass on to the TCP layer below is ......... (1) 216 bytes (2) 216 bytes + TCP header length (3) 216 bytes - TCP header length (4) 215 bytes
Last Answer : Answer: Marks to all
Description : Which of the following Unit can be used to measure the speed of a computer? A. BAUD B. SYPS C. MIPS D. None of the Above
Last Answer : C. MIPS
Description : Which of the following are the best units of data on an external storage device? A) Bits B) Bytes C) Hertz D) Clock cycles
Last Answer : Answer : B
Description : The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes
Last Answer : c. packets
Description : The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes
Last Answer : C. packets
Description : The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes
Last Answer : c) packets
Description : Which of the following are the best units of data on an external storage device? 1) Bits 2) Bytes 3) Hertz 4) Clock cycles
Last Answer : 2) Bytes
Description : Which of the following are the best units of data on an external storage device? 1 Bits 2 Bytes 3 Hertz 4 Clock cycles
Last Answer : 2 Bytes
Description : Data in network layer is transferred in the form of ____________ A. Layers B. Packets C. Bytes D. Bits
Last Answer : B. Packets
Description : What is the bit rate for transmitting uncompressed 800x600 pixel colour frames with 8 bits/pixel at 40 frames/second ? (A) 2.4 Mbps (B) 15.36 Mbps (C) 153.6 Mbps (D) 1536 Mbps
Last Answer : (C) 153.6 Mbps Explanation: The number of bits/sec is just 800x600x40x8 or 153.6 Mbps.
Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS
Last Answer : c. 32 Kbps
Description : Given the symbols A, B, C, D, E, F, G and H with the probabilities 1/30, 1/30, 1/30, 2/30, 3/30, 5/30, 5/30 and 12/30 respectively. The average Huffman code size in bits per symbol is: (A) 67/30 (B) 70/34 (C) 76/30 (D) 78/30
Last Answer : (C) 76/30
Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps
Last Answer : (C) 128 kbps
Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network ? (A) 2 Mbps (B) 60 Mbps (C) 120 Mbps (D) 10 Mbps
Last Answer : (A) 2 Mbps Explanation: In data transmission, throughput is the amount of data moved successfully from one place to another in a given period of time, and typically measured in bits per second (bps), ... second (Mbps) or gigabits per second (Gbps). Here, Throughput = 15000 x 8000/60 = 2 Mbps
Description : Consider a source with symbols A, B, C, D with probabilities 1/2, 1/4, 1/8, 1/8 respectively. What is the average number of bits per symbol for the Huffman code generated from above information? (A) 2 bits per symbol (B) 1.75 bits per symbol (C) 1.50 bits per symbol (D) 1.25 bits per symbol
Last Answer : (B) 1.75 bits per symbol
Description : Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ... ...... (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps
Last Answer : Answer: Marks given to all
Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? (A) 1 Mbps (B) 2 Mbps (C) 10 Mbps (D) 12 Mbps
Last Answer : (B) 2 Mbps
Description : When 2 or more bits in a data unit has been changed during the transmission, the error is called _____ a. random error b. burst error c. inverted error d. double error
Last Answer : b. burst error
Description : When 2 or more bits in a data unit has been changed during the transmission, the error is called ____________ A. random error B. burst error C. inverted error D. double error
Last Answer : B. burst error
Description : The ............ layer change bits onto electromagnetic signals. A) Physical B) Transport C) Data Link D) Presentation
Last Answer : A) Physical
Description : A data file of 1,00,000 characters contains only the characters g-l, with the frequencies as indicated in table: using the variable-length code by Huffman codes, the file can be encoded with (A) 2,52,000 bits (B) 2,64,000 bits (C) 2,46,000 bits (D) 2,24,000 bits
Last Answer : (D) 2,24,000 bits
Description : Find the false statement: (A) In Modern Cryptography, symmetric key algorithms use same key both for Encryption and Decryption. (B) The Symmetric cipher DES (Data Encryption Standard) was widely used ... and 124 bits. (D) Public key algorithms use two different keys for Encryption and Decryption.
Last Answer : (C) The AES (Advanced Encryption Standard) cryptosystem allows variable key lengths of size 56 bits and 124 bits.