Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is

Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is

(A) causal & linear (B) non-causal & linear

(C) causal & non-linear (D) non-causal & non-linear
by

1 Answer

Answer :

Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is non-causal & linear

by

Related questions

What is the time response of a system whose poles lie on the right hand side of s-plane?

Description : What is the time response of a system whose poles lie on the right hand side of s-plane? A) Exponentially increasing B) Exponentially decreasing C) Sinusoidal oscillations D) Step response 

Last Answer : What is the time response of a system whose poles lie on the right hand side of s-plane? A) Exponentially increasing B) Exponentially decreasing C) Sinusoidal oscillations D) Step response 

Draw the labeled block diagram of process control system and explain each block.

Description : Draw the labeled block diagram of process control system and explain each block.

Last Answer : Explanation - Process control system consists of process or plant, sensor, error detector, automatic Controller, actuator or control element. 1) Process or plant- process means some manufacturing sequence ... process which changes the process variable. Output of this block is denoted by u .

What will happen to the gain margin if the gain of the open loop system is doubled?

Description : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

Last Answer : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Description : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Last Answer : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is 16

A system is linear if and only if it satisfies

Description : A system is linear if and only if it satisfies

Last Answer : A system is linear if and only if it satisfies principle of superposition and principle of homogeneity

How can the steady-state error in a system be reduced?

Description : How can the steady-state error in a system be reduced?  (1) By decreasing the type of system (2) By increasing system gain (3) By decreasing the static error constant (4) By increasing the input

Last Answer : How can the steady-state error in a system be reduced?  (1) By decreasing the type of system (2) By increasing system gain (3) By decreasing the static error constant (4) By increasing the input

Phase margin is the amount of angle to make the system

Description : Phase margin is the amount of angle to make the system  (1) Oscillatory (2) Stable (3) Unstable (4) Exponential

Last Answer : Phase margin is the amount of angle to make the system Unstable 

If the gain of the open loop system is doubled, the gain margin

Description : If the gain of the open loop system is doubled, the gain margin  (1) Is not affected (2) Gets doubled (3) Becomes half (4) Becomes one -forth

Last Answer : If the gain of the open loop system is doubled, the gain margin Becomes half

A differentiator is not usually used in control system, because it : -

Description : A differentiator is not usually used in control system, because it : - (A) reduces damping  (B) increases error  (C) reduces gain margin  (D) increases input noise

Last Answer : A differentiator is not usually used in control system, because it : - increases input noise

In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to

Description : In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to (A) Capacitance C. (B) Inductance L. (C) Resistance R. (D) Inductive reactance XL

Last Answer : In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to Inductance L.

Observability of a system is essential for

Description : Observability of a system is essential for (A) finding a solution to the state equation. (B) finding a suitable model in state space. (C) transferring the state of the system from any initial value to any specified final value. (D) state estimation.

Last Answer : Observability of a system is essential for state estimation.

A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the

Description : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system (A) crosses the real axis at +0.1 (B) crosses the real axis at -0.1. (C) crosses the imaginary axis at -0.1 (D) crosses the imaginary axis at +0.1

Last Answer : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system crosses the real axis at -0.1.

A second order system shows 100% overshoot in its unit step response. It can be categorized as

Description : A second order system shows 100% overshoot in its unit step response. It can be categorized as (A) underdamped system. (B) overdamped system. (C) Critically damped system. (D) undamped system.

Last Answer : A second order system shows 100% overshoot in its unit step response. It can be categorized as undamped system.

lf the poles of system are lying on the imaginary axis in s-plane, then the system will be

Description : lf the poles of system are lying on the imaginary axis in s-plane, then the system will be

Last Answer : lf the poles of system are lying on the imaginary axis in s-plane, then the system will be marginally stable

The damping factor of a particular system is unity, the system response will be

Description : The damping factor of a particular system is unity, the system response will be

Last Answer : The damping factor of a particular system is unity, the system response will be critically damped

The steady state error of the system can be minimized by

Description : The steady state error of the system can be minimized by

Last Answer : The steady state error of the system can be minimized by increasing gain k

Negative feedback in a closed-loop control system DOES NOT

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

What are some examples of a closed loop system?

Description : What are some examples of a closed loop system?

Last Answer : C.L s/m. EX. Air conditioner (AC), rocket launcher, radar system, voltage stabilizer etc.

What is an example of an open loop system?

Description : What is an example of an open loop system?

Last Answer : Open loop system. Ex. Electric heater, washing machine, fan, electric switch, etc

What are the advantages of open loop control system?

Description : What are the advantages of open loop control system?

Last Answer : Open loop control system are simple to design. Open loop control system are generally stable.

Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

Description : Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

Last Answer : (i) Balancing Phase currents: Proper (healthy balanced) three phase loads always draw equal currents in all lines but single phase loads in the 3 phase 4 wire system or loads connected between two ... . 11) Minimize I2R losses. 12) Balance the load currents. 13) Regulate the system voltages.

6.30 Consider the state variable model.

Description : Problem number 6.30 from digital control and state variable methods by M Gopal (second edition)

Last Answer : Solution for 6.30​​​​​​

If the displayed system time and date is wrong, you can reset it using :

Description : If the displayed system time and date is wrong, you can reset it using :  (A) Task bar (B) Menu bar (C) Desk top (D) Control panel

Last Answer : If the displayed system time and date is wrong, you can reset it using : Control panel

In quadrilateral speed-time curve of electric traction system, the accelerations during successive time periods

Description : In quadrilateral speed-time curve of electric traction system, the accelerations during successive time periods are ______ respectively.  (A) positive, negative and negative (B) positive, zero and negative (C) positive, positive and negative (D) positive, negative and zero

Last Answer : In quadrilateral speed-time curve of electric traction system, the accelerations during successive time periods are positive, negative and negative respectively. 

With fault clearing time, the transient stability of a power system

Description : With fault clearing time, the transient stability of a power system

Last Answer : With fault clearing time, the transient stability of a power system decreases

What is a hard real time system?

Description : What is a hard real time system?

Last Answer : If the real-time systems have minimum interrupt latency and task deadline with prescribe time limits then it is known as hard real-time systems.  If these two requirements meet in real time systems but not always then it is known as soft real-time systems.

Linear Time Invariant (LTI) System

Description : Linear Time Invariant (LTI) System

Last Answer : Linear Time Invariant System Linear system means a system which possesses the property of superposition. Time invariant system means its behavior and characteristics are fixed over time. Before ... from the impulse response. Impulse response is related to frequency response via Fourier transform.

If a step function is applied to the input of a system and the output...

Description : If a step function is applied to the input of a system and the output remains below a certain level for all the time, the system is?

Last Answer : If a step function is applied to the input of a system and the output remains below a certain level for all the time, the system is not necessarily stable.

Describe the use of Pneumatic system in daily life.

Description : Describe the use of Pneumatic system in daily life.

Last Answer : I. Automatic tyres are inflated with compressed air. II. Spray guns use compressed air for spraying paints. III. Compressed air is used in air powered tools like hammers and drills IV. It is also used in air brake system in heavy vehicles.

Write short note on UPS and its usage in railway system.

Description : Write short note on UPS and its usage in railway system.

Last Answer : Ans. Ideally, the voltage supply by the utility system should be perfect sine wave without any harmonics, at its nominal frequency of 50 Hz and at its nominal magnitude. In practice however voltage can ... load from one source to the other results in the least amount of disturbance seen by the load.

Septic System Design

Description : Septic System Design

Last Answer : Most people, when they get their own property, take all their time designing and building the house first and worry about the septic system later. For the most part it works out just fine, the house is built ... that it's a bad choice-it isn't-but it's practical to always go for the least expensive.

The Lymphatic System

Description : The Lymphatic System

Last Answer : An Overview of the Lymphatic System The lymphatic system refers to a type of network in the body that consists of the lymphoid organs, lymphatic tissues, lymph ducts, lymph nodes, lymph vessels and ... many ways in which the lymphatic system takes action in a lot of the human body's processes.

Septic System Maintenance

Description : Septic System Maintenance

Last Answer : Nobody is interested in thinking about what happens when someone forgets to clean his or her septic system in the backyard. We don't need to tell you either. Not draining and cleaning your septic ... its regular cleaning schedule you don't have to worry about the system breaking down anytime soon.

Septic System Cleaning

Description : Septic System Cleaning

Last Answer : A septic tank requires cleaning to remove the scum or solid wastes that have accumulated in it over the years. The modern septic system was designed to allow liquid waste to flow freely back out as ... from clogs and impurities? Remember, when the tank goes, the system goes. Take note of that.

How To Make A Sprinkler System

Description : How To Make A Sprinkler System

Last Answer : Watering plants can be quite tiresome, especially for huge gardens. You will have to walk through the maze of shrubs, blooms and rocks just to sprinkle every garden plant with water. Thanks to human ... 't join the show American Inventor with this invention; this writer would not be very happy.

How to Choose a Home Security System

Description : How to Choose a Home Security System

Last Answer : How to Choose a Home Security System Burglars can strike the moment your house is left alone or when everyone's asleep. Even if all the doors are locked, some of them can still enter using their ... protected upon the trigger of an alarm or a flick of a switch from the system's control panel.

How to Care for Your Immune System

Description : How to Care for Your Immune System

Last Answer : How to Care for Your Immune System Your immune system is important in keeping you healthy, helping you recover from disease and preventing disease from ever affecting you in the first place. The immune ... Live a good long life with a healthy and strong immune system. Remember: Health is wealth!

How To Boost Your Immune System

Description : How To Boost Your Immune System

Last Answer : How To Boost Your Immune System Your immune system is one of your body's most important parts. It protects you from having to succumb to every little illness that your body is in danger of ... defense against pathogens. Boost your immune system and Ensure that you will live a long and healthy life.

How to Install a Surround Sound System

Description : How to Install a Surround Sound System

Last Answer : How to Install a Surround Sound System The complete multimedia experience is in great part about the perfect execution of sound. While normal stereo speakers are great for watching TV or some movies, ... new surround sound system and enjoy every bit and beat for the best audio experience possible.

How to Install a Sprinkler System

Description : How to Install a Sprinkler System

Last Answer : How to Install a Sprinkler System A sprinkler system promotes convenience in the normally tedious job of watering your lawn or garden. Upon activation, the sprinklers provide water for the entire ... When everything is up and running, you can finally stop worrying about watering the plants.

How to Uninstall an Operating System ?

Description : How to Uninstall an Operating System ?

Last Answer : How to Uninstall an Operating System Even the most stable operating systems can crash, and suffer from irreparable damage that you may need to uninstall and reinstall them. Some users, though, may like to ... , you can easily remove the old, damaged operating system, and replace it with a new one.

SOLAR SYSTEM FACTS

Description : SOLAR SYSTEM FACTS

Last Answer : There are tons of asteroids in our solar system. One of them, Asteroid 243 Ida, even has it's own moon. One of the moons of Saturn, called Mimas, is heavily cratered. This creates an odd appearance ... our solar system, the sun still accounts for 99.8 percent of the total mass of our solar system.

Draw a neat sketch of Gating system. State the functions of any four elements.

Description : Draw a neat sketch of Gating system. State the functions of any four elements.  

Last Answer : Gating system:  1. Sprue: The circular cross section that minimizes heat loss and turbulence is sprue, and the area of it is quantified from the choke area as well as the gating ratio.  2. ... the molten metal flow from the ingate has to be proportional to the casting area's volume. 

Designate a tool 8 – 10 – 6 – 6 – 5 – 10 – 0.8 signature in ASA system.

Description : Designate a tool 8 – 10 – 6 – 6 – 5 – 10 – 0.8 signature in ASA system.  

Last Answer : 1. Back rake angle-8 2. Side rake angle-10. 3. End relief angle-6. 4. Side relief angle-6 5. End cutting edge angle-5 6. Side cutting edge angle-10. 7. Nose radius-0.8 mm.

Grid distribution system

Description : Grid distribution system

Last Answer : Grid distribution system:-  In this system, when the feeder or loop or ring is charged (energized) by two or more than two substations from two or more than two different generating stations then it is known as “Grid distribution system. In this system only one feeder is utilized at a time. 

Define: primary and secondary distribution system

Description : Define: primary and secondary distribution system 

Last Answer : i) Primary Distribution:  It is a 3-phase, 3-wire transmission line connected in between receiving substation to Distribution substation. OR It is link between receiving substation & ... substation to consumer line. OR It is link between distribution transformer substation & consumer. 

List classification of distributor system with their advantages each.

Description : List classification of distributor system with their advantages each.

Last Answer : According to scheme of connection there are three types of distribution systems: - 1.Radial (Tree) distribution system 2.Ring mains (Loop) distribution system 3. Grid (interconnected) ... It has highest reliability to maintain supply even when there was maintenance on any one feeder.

State advantages and disadvantages of radial distributor system.

Description : State advantages and disadvantages of radial distributor system. 

Last Answer : Advantages of radial distributor system: 1. Design of layout is simple. 2. Capital cost & Erecting cost is less as there is only one feeder. 3. Time required for completion of ... maintain supply to consumers when there is maintenance on feeder. 3. Voltage fluctuations are more.

Summerise the role of power system engineer.

Description : Summerise the role of power system engineer.

Last Answer : Role of power system engineer:  i. On the planning side he or she has to make decisions on how much electricity to generate  ii. For operation of the power system he has to plan for ... for energy conservation and load management. viii. For solving the power system problems he has to update with

State the losses in secondary distribution system.

Description : State the losses in secondary distribution system. 

Last Answer : The losses in secondary distribution system: a) Technical losses: 1. Due to poor voltage 2. Due to unbalance load 3. Due poor quality of transformer & its components 4. Due to poor quality ... of induction type of energy meter. 3. Lack of administration. 4. Energy theft 5. Unmetered supply