ln HRC fuse the time between cut-off and final current zero is called

1 Answer

Answer :

ln HRC fuse the time between cut-off and final current zero is called the arcing time

Related questions

Description : what is HRC fuse?

Last Answer : HRC (High Rupturing Capacity) fuse HRC fuse is High Rupturing Capacity fuse. At the time of fault it disconnect the circuit very fast. Filling powder is silica sand. No flashover ... speed response Reliable No maintenance CheaperDisadvantages:- We have to replace it manually after each operation.

Last Answer : H.R.C. fuse, as compared to a rewirable fuse, has no ageing effect, high speed of operation, high rupturing capacity.

Description : What is the advantage of HRC fuses when compared with rewireable fuses?

Last Answer : Ans.HRC fuses have high rupturing capacity, high speed of operation and no aging effect.

Last Answer : The fuse blows off by melting.

Last Answer : The inverse definite mean time relays are used for over current and earth fault protection of transformer against internal short-circuits.

Description : A fuse wire should have :  (A) Low specific resistance and high melting point (B) Low specific resistance and low melting point (C) High specific resistance and high melting point (D) High specific resistance and low melting point

Last Answer : A fuse wire should have : High specific resistance and low melting point

Last Answer : A fuse in a motor circuit provides protection against short-circuit and overload.

Last Answer : The fuse rating is expressed in terms of current.

Last Answer : A fuse is connected in series with circuit.

Last Answer : The material used for fuse must have low melting point and high specific resistance.

Last Answer : The main function of a fuse is to prevent excessive currents.

Description : Describe the difference between direct and alternating current.

Last Answer : Direct current is the flow of electricity or charge in one direction..  Alternative current is the flow of charge that doesn't flow in one direction. 

Description : What is the relationship between power and current?

Last Answer : P = I2R Where P = power I = Current R = Resistance This the relationship between current and power.

Description : What is the difference between eddy current and hysteresis loss?

Last Answer : Loss occurred by magnetising and demagnetising process is called histerisis loss and the current flowed due to the magnetic field produced by the electric field applied is called eddy current losses

Description : What is the difference between line and phase current?

Last Answer : The currents flows through phase lines is called line voltage and currents flows from phase to neutral line is called phase current

Description : Give the circuit analysis of current source inverter with resistive load. What are the main difference between voltage source inverter and current source inverter?

Last Answer : Current source inverter (CSI): In current source inverter, the output current is independent of load. The input current of current source inverter is constant. Current source converter converts DC input current to ... are connected in parallel. In CSI diodes are connected in series.

Description : Explain the concept of initial and final conditions in switching for L and C.

Last Answer : i) Inductor: The current through an inductor cannot change instantly. If the inductor current is zero just before switching, then whatever may be the applied voltage, just after switching the inductor ... open-circuit.  The initial and final conditions are summarized in following table:

Last Answer : H.R.C. fuses provide best protection against short-circuits.

Description : Which of the following has nearly zero temperature coefficient? A) Constantan B) Manganin C) Both A and B D) None of these

Last Answer : Which of the following has nearly zero temperature coefficient? A) Constantan B) Manganin C) Both A and B D) None of these

Last Answer : A transformer can have regulation closer to zero on leading power factor.

Description : Is electric potential zero when electric field is zero?

Last Answer : Yes  .If  electric  field  is  zero  then  electric  potential  is  zero  ,  not  even  one.

Description : Can the electric field between two positive charges be zero?

Last Answer : It  can  only  if  they  have  equal  charges.

Description : The transit time of the current carriers through the channel of a JFET decides it's?

Last Answer : The transit time of the current carriers through the channel of a JFET decides it's gate characteristics.

Description : What is fuse?

Last Answer : Ans. Fuse is used to protect an electric circuit when the rated current exceeds in the circuit the fuse wire melts and opens the circuit.

Description : State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.  

Last Answer : Following advantages of MCB over Fuse: 1. No need of replacement of fuse wire. 2. Manually restore of supply is simple. 3. Fault understanding by visual inspection 4. More safe than fuse The standard specifications of ... 6A, 10A,16A,20A, 25A, 30A, 32A, 40A, 50A, 60A and 63A 6. 250V and 450 v

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Last Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

Description : Write applications of each of the following:(i) Fuse (ii) MCB (iii) MCCB.

Last Answer : i) Applications of fuse:  * Used in domestic installations to provide short circuit protection.  * Used in commercial / Industrial installations to provide overload and short circuit protection.  * Used in ...  * Rectifiers panels,  * U.P.S, Electronic equipment,  * Motors,  * Furnaces

Description : Give the function of fuse and switch.

Last Answer : Functions of fuse:  * To break the circuit under fault condition.  * To provide overcurrent protection to the circuit.  * To provide short circuit protection to the circuit.  * To provide ...  * To make the electric circuit manually.  * To break the electric circuit manually.

Description : What is a fuse ?

Last Answer :  A Fuse is a protective device which prevent overloading of current in a circuit.

Description : What is the difference between relay and contactor?

Last Answer : Relay have smaller ratings. Contactor is a high rating relay.

Last Answer : The inductive interference between power and communication line can be minimized by transposition of the power line, transposition of the communication line.

Last Answer : Discrimination between main and back up protection is provided by the use of relays which are slow.

Last Answer : The interaction between a transmission line and communication line is minimized by transposing transmission as well as communication lines, increasing the height of the transmission line tower, increasing the distance between the two lines.

Last Answer : A differential relay measures the vector difference between two or more similar electrical quantities.

Description : What is the difference between a switch and a relay?

Last Answer : Switch is simply a mechanical contact mechanism and relay is a electromagnetic switch . Switch can be direct mechanically turn on and off but relay can be operated by energising coil .

Description : Describe the working of HRC fuse with neat diagram.

Last Answer : Working of HRC Fuse: Under normal conditions, the fuse element is at a temperature below its melting point. Therefore, it carries the normal current without overheating. When a fault ... powder and results in the formation of high resistance substance that helps in quenching the arc. 

Description : Explain construction and characteristics of HRC fuse.

Last Answer : Construction of H.R.C. Fuse: Figure shows the essential parts of a typical H.R.C. fuse. It mainly consist of a heat resisting ceramic body. Both the ends of the cermaic body consists ... particular circuit and for coordination purpose. A typical Fuse characteristic is shown in figure below. 

Description : The operating point of a protective current transformer is near the

Last Answer : The operating point of a protective current transformer is near the Ankle point

Description : If the fault current is 6000 A, the relay plug setting is 150% and the CT ratio is 400/5, the plug setting multiplier will be

Last Answer : If the fault current is 6000 A, the relay plug setting is 150% and the CT ratio is 400/5, the plug setting multiplier will be 10

Description : If the % reactance upto the fault point is 20%, then the short circuit current will be

Last Answer : If the % reactance upto the fault point is 20%, then the short circuit current will be 5 times the full load current

Description : The inrush current of a transformer at no load is maximum if the supply voltage is switched on  (1) at peak voltage value (2) at zero voltage value (3) at half voltage value (4) at 0.866 time voltage value

Last Answer : At 0.866 time voltage value

Description : The eddy current loss in a dc generator is 400 W at 40 Hz frequency of reversal and constant flux density. When frequency is increased to 50 Hz., eddy current loss is :  (A) 256 W (B) 320 W (C) 500 W (D) 625 W

Last Answer : The eddy current loss in a dc generator is 400 W at 40 Hz frequency of reversal and constant flux density. When frequency is increased to 50 Hz., eddy current loss is : 625 W

Description : In the induction type directional over current relay, when a short-circuit occurs in the circuit (A) power flows in reverse direction (B) power flows in normal direction (C) directional power element does not operate (D) over current element is not energized

Last Answer : In the induction type directional over current relay, when a short-circuit occurs in the circuit power flows in reverse direction

Last Answer : In order that current should flow without causing excessive heating or voltage drop, the relay contacts should have low contact resistance, be clean and smooth, be of sufficient size and proper shape.

Description : In which fault the maximum short circuit current occurs?

Last Answer : In three phase bolted fault the maximum short circuit occurs.

Description : what is the difference between AC and DC current ?

Last Answer : AC is generated using Alternator. DC is generated using DC generator. AC changes its direction periodically. DC do not change its direction periodically. AC have non zero frequency. DC have zero ... Power factor of AC is between 0 and 1. But power factor of DC is always 1.

Description : The operating time of instantaneous relay is

Last Answer : The operating time of instantaneous relay is 0.1 sec

Description : With fault clearing time, the transient stability of a power system

Last Answer : With fault clearing time, the transient stability of a power system decreases

Last Answer : The relay with inverse time characteristic will operate within 5 to 10 sec.

Last Answer : The time of closing the cycle, in modern circuit breakers is 0.003 sec.