Series reactors are used to

Series reactors are used to
by

1 Answer

Answer :

Series reactors are used to bring down the fault level within the capacity of the switchgear

by

Related questions

Series reactors should have?

Last Answer : Series reactors should have low resistance.

Series capacitors are used to?

Last Answer : Series capacitors are used to compensate for line inductive reactance.

State the use of shunt and series resistance used in extension of meter.

Description : State the use of shunt and series resistance used in extension of meter.

Last Answer : Use of shunt and series resistance: i) Use of shunt: To extend the range of Ammeter. ii) Use of series resistance: To extend the range of Voltmeter.

Series capacitive compensation in EHV transmission line is used to

Description : Series capacitive compensation in EHV transmission line is used to

Last Answer : To maintain voltage stability 

List out main components of Reactors.

Description : List out main components of Reactors. 

Last Answer : List the main components of Reactors:  1. Core 2. Nuclear fuel (U235) 3. Moderator 4. Control Rod 5. Reflector 6. Reactor vessel 7. Shielding  

How are nuclear reactors controlled? Explain two different methods in brief.

Description : How are nuclear reactors controlled? Explain two different methods in brief.

Last Answer : Nuclear reactor is controlled using control rods: Control rods are made up of very high neutron absorbing material like boron, cadmium. By adjusting height of control rods on reactor core ... of nuclear reaction will increase. Whereas by pushing control rod towards the core it will reduce.

Light triggering is mainly used in

Description : Light triggering is mainly used in

Last Answer : Light triggering is mainly used in High voltage direct current transmission

A relay used for protection of motors against overload is :

Description : A relay used for protection of motors against overload is :  (A) Impedance relay (B) Electromagnetic attraction type (C) Thermal relay (D) Buchholz's relay

Last Answer : D

Earthing switch is used for?

Description : Earthing switch is used for?  (A) Measuring of safety voltage (B) Protection of equipment from ground faults (C) Discharging residual energies (D) All of the above 

Last Answer : Earthing switch is used for?  (A) Measuring of safety voltage (B) Protection of equipment from ground faults (C) Discharging residual energies (D) All of the above 

Auto reclosing is used in case of

Description : Auto reclosing is used in case of

Last Answer : Auto reclosing is used in case of air blast C.B.

A negative sequence relay is used for protection of

Description : A negative sequence relay is used for protection of  (1) Generator (3) Motor (2) Transformer (4) Long Transmission lines

Last Answer : A negative sequence relay is used for protection of Generator 

The material used in liquid fuses is

Description : The material used in liquid fuses is  (1) SF6 (3) carbon tetra chloride (2) distilled water (4) transformer oil

Last Answer : The material used in liquid fuses is  carbon tetra chloride

IDMT relays are used to protect the transformer against :

Description : IDMT relays are used to protect the transformer against :  (A) Internal short -circuits (B) Open circuits (C) External short circuits (D) Oil leakage

Last Answer : IDMT relays are used to protect the transformer against : External short circuits

ln a minimum oil circuit breaker the oil is used

Description : ln a minimum oil circuit breaker the oil is used

Last Answer : ln a minimum oil circuit breaker the oil is used to act as circuit breaking medium only

Regulating-transformers are used in power systems for control of

Description : Regulating-transformers are used in power systems for control of

Last Answer : Regulating-transformers are used in power systems for control of power flow

Surge absorbers are used for protection against

Description : Surge absorbers are used for protection against

Last Answer : Surge absorbers are used for protection against low voltage high frequency oscillations

A switchgear is device used for?

Last Answer : A switchgear is device used for switching, controlling and protecting the electrical circuit and equipment.

The material used for fuse must have?

Last Answer : The material used for fuse must have low melting point and high specific resistance.

The inverse definite mean time relays are used for over current and earth fault protection of transformer against?

Last Answer : The inverse definite mean time relays are used for over current and earth fault protection of transformer against internal short-circuits.

The single phasing relays are used for the protection of?

Last Answer : The single phasing relays are used for the protection of three phase motors.

The under voltage relay can be used for?

Last Answer : The under voltage relay can be used for generators, busbars, transformers, motors.

Which relays are used for phase faults on long line?

Last Answer : Impedance relays are used for phase faults on long line.

A.C. network analyser is used to solve problems of?

Last Answer : A.C. network analyser is used to solve problems of load flow, short-circuit and stability.

Wave trap is used to trap waves of?

Last Answer : Wave trap is used to trap waves of higher frequencies entering generator or transformer units.

Air blast circuit breaker is used for?

Last Answer : Air blast circuit breaker is used for repeated duty.

Will you watch the new series Ash vs the Evil Dead?

Description : Will you watch the new series Ash vs the Evil Dead?

Last Answer : Hail to the king, baby.

Why is the Twilight series so famous?

Description : Why is the Twilight series so famous?

Last Answer : I haven't read them but my wife is completely addicted to them. She's read the books several times and seen the movie probably 6 or 7 times, going with different people. Her 45 year old aunt loves them ... just fall in love with that guy. I don't know. It's definitely not limited to teens though.

State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Description : State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Last Answer : Modifications are necessary in a dc series motor so that it operates satisfactorily on ac supply. The modifications are as follows:  1) AC series motor is built with a few field turns as ... and grinders 5) High speed vacuum cleaners 6) Sewing machines 7) Food processors 8) Drilling machine 

Explain with neat diagram series and parallel magnetic circuits.

Description : Explain with neat diagram series and parallel magnetic circuits. 

Last Answer : Series magnetic circuit: When different magnetic materials having different lengths, cross sectional areas and permeability are connected one after another, in which same flux is established in different sections, then it is called series ... flux, Φ = Φ1 + Φ2  Path 1: BAFE  Path 2: BACD

Write two applications of D.C. series motor.

Description : Write two applications of D.C. series motor. 

Last Answer : The applications of D.C. series motor: 1. Cranes 2. Hoists 3. Trolley and cars 4. Conveyors 5. For traction work i.e. electric locomotives 6. Elevator 7. Air compressor

Brake test on DC series motor

Description : Brake test on DC series motor

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

The loop equation for a series RLC circuit gives

Description : The loop equation for a series RLC circuit gives

Last Answer : The loop equation for a series RLC circuit gives

Series parallel resistances problem solution

Description : Series parallel resistances problem solution

Last Answer : Series parallel resistances problem solution

Source transformation Replace the circuit with voltage source in series with a single resistor

Description : Source transformation Replace the circuit with voltage source in series with a single resistor

Last Answer : Source transformation Replace the circuit with voltage source in series with a single resistor

what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel

Description : what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel

Last Answer : equivalent resistance

role of the series resistance connected in PMMC movement.

Description : role of the series resistance connected in PMMC movement.

Last Answer : A PMMC Instrument can be used as voltmeter by just connecting a series resistance with the moving coil. This series resistance is called Voltmeter Multiplier. This combination of moving coil and ... current whose voltage is to be measured. Ideally the resistance of voltmeter should be infinite

Series rc circuits

Description : Series rc circuits

Last Answer : Series rc circuits

Series circuit rules

Description : Series circuit rules

Last Answer : Series circuit rules

X L and X C in Series

Description : X L and X C in Series

Last Answer : Inductive reactance X L and Capacitive reactance X C in series. Inductive reactance X L of value 60 ohm and Capacitive reactance X C of value 40 ohm are connected in series. 120 volts A C voltage is ... . The current will be 6 ampere. This time current will lead the voltage by 90 degree.

Series and parallel capacitor problem

Description : Series and parallel capacitor problem

Last Answer : Series and parallel capacitor problem 1 : https://youtu.be/MSl5mRwtjAE Series and parallel capacitor problem 2 : https://youtu.be/yGwbpyEtIyw Series and parallel capacitor problem 3 : https:// ... https://youtu.be/_7KwEwWqiNU Series and parallel capacitor problem 10 : https://youtu.be/et8MCWV_OyE

Describe the reason of using dc series motor for electric trains.

Description : Describe the reason of using dc series motor for electric trains.

Last Answer : Electric trains require an inverse torque speed characteristics for proper operation. That is a higher torque is required at start (when speed is nil or low) and as the train picks up ... torque - speed characteristics of DC series motors match, these motors are suitable for electric trains

State the principle of solar cell. What is necessity of series and parallel connection of solar cells.

Description : State the principle of solar cell. What is necessity of series and parallel connection of solar cells.

Last Answer : Principle of solar cell:-  Working:- Solar cell operates on principle of Photo-voltaic effect Solar cell works in following steps:  The solar cell is composed of a P-type ... of Voltage & Current rating it is necessity of connecting series and parallel connection of solar cells.

State necessity of series connection and parallel connection of batteries.

Description : State necessity of series connection and parallel connection of batteries.

Last Answer : Necessity of series connection of batteries: 1. The batteries are available with some specific terminal voltages. e. g. 6V, 12V, 24V, 48V etc. 2. If we want to have some terminal voltage other than ... batteries of capacities I1, I2, I3, I4 . are connected in parallel, all having identical emfs.

An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to

Description :  An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to a load impedance ZL when A) ZL = R B) ZL = jXS C) ZL = R-jXS D) ZL = R+jXS 

Last Answer :  An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to a load impedance ZL when ZL = R-jXS

An inductor is connected in series with SCR to protect it from

Description : An inductor is connected in series with SCR to protect it from A) Excessive high voltage B) Excessive high dv/dt C) Excessive high di/dt D) Excessive large forward current 

Last Answer : An inductor is connected in series with SCR to protect it from Excessive high di/dt

In a series R-C circuit, with the increase in frequency, current

Description : In a series R-C circuit, with the increase in frequency, current (A) Reduces (B) Increases (C) Does not change (D) Becomes zero

Last Answer : In a series R-C circuit, with the increase in frequency, current Increases

A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are

Description : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is

Last Answer : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is 500 Hz

Two 100W, 200V lamps are connected in series across a 200V supply. The total power

Description : Two 100W, 200V lamps are connected in series across a 200V supply. The total power consumed by each lamp will be in Watts

Last Answer : 4800

We connected a 35V dc supply to a resistance of 600 Ohm in series with an unknown resistance

Description : We connected a 35V dc supply to a resistance of 600 Ohm in series with an unknown resistance R.A. voltmeter having a resistance of 1.2 kOhm is connected across 600 Ohm resistance and read 5v. The value of resistance R will be

Last Answer : We connected a 35V dc supply to a resistance of 600 Ohm in series with an unknown resistance R.A. voltmeter having a resistance of 1.2 kOhm is connected across 600 Ohm resistance and read 5v. The value of resistance R will be 2.4 kOhm

In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage

Description : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?

Last Answer : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C? 7 V