The frequencies and voltage used in Dielectric heating are

The frequencies and voltage used in Dielectric heating are

(A) 10 – 30 MHz, upto 25 kV (B) 50 – 60 Hz, upto 25 kV

(C) 10 – 30 MHz, upto 100 V (D) 50 – 60 Hz, 110 V – 230 V
by

1 Answer

Answer :

The frequencies and voltage used in Dielectric heating are 10 – 30 MHz, upto 25 kV

by

Related questions

The range of frequencies used in induction heating is :

Description : The range of frequencies used in induction heating is :  (A) 0-25 Hz  (C) less than 200 Hz  (B) 50 to 100 Hz  (D) more than 1 kHz

Last Answer : The range of frequencies used in induction heating is : more than 1 kHz

Define : (i) Dielectric strength (ii) Breakdown voltage

Description : Define : (i) Dielectric strength (ii) Breakdown voltage

Last Answer : (i) Dielectric strength: The voltage which a dielectric material can withstand without breaking down (without losing its dielectric property) is called its dielectric strength. It is represented by kV/mm ... or is no longer an insulator) for a specified thickness, is its breakdown voltage. 

In order that current should flow without causing excessive heating or voltage drop, the relay contacts should?

Last Answer : In order that current should flow without causing excessive heating or voltage drop, the relay contacts should have low contact resistance, be clean and smooth, be of sufficient size and proper shape.

Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Description : Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Last Answer : Parts Insulating Materials  Insulation between heating element and base plate of electric iron. Mica Insulation used over copper or aluminium conductor used for making coils.  ... Transformer bushings Porcelain  Insulation between transmission line and pole. Porcelain

The voltage used for suburban trains in D.C. system is usually?

Last Answer : The voltage used for suburban trains in D.C. system is usually 600 to 750 V.

What is the difference between an insulator and a dielectric?

Description : What is the difference between an insulator and a dielectric?

Last Answer : Dielectric is the another name for insulator.

Wire-wound resistors are unsuitable for use at high frequencies because they?

Description : Wire-wound resistors are unsuitable for use at high frequencies because they?

Last Answer : Wire-wound resistors are unsuitable for use at high frequencies because they exhibit unwanted inductive and capacitive effects.

At ______ frequencies the parallel R-L circuit behaves as purely resistive.

Description : At ______ frequencies the parallel R-L circuit behaves as purely resistive.

Last Answer : At very high frequencies the parallel R-L circuit behaves as purely resistive.

At very low frequencies a series R-C circuit behaves as almost purely?

Description : At very low frequencies a series R-C circuit behaves as almost purely?

Last Answer : At very low frequencies a series R-C circuit behaves as almost purely capacitive.

List standard voltage level used in India.

Description : List standard voltage level used in India. 

Last Answer : Standard voltage level used in India: * Generation Voltage : 3.3KV, 6.6KV,11KV and 17.5 KV,21KV (Now a days generation voltage is in the range of 11KV- 33KV) * Primary Transmission voltage :- 220 ... voltages in India are 765 KV (750KV), 400KV, 220KV, 132KV, 110KV, 66KV, 33KV, 22KV, 11KV.

An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic

Description : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be  (1) unaffected (2) decreased (3) increased (4) either decreased or increased depending on the direction of the DC field

Last Answer : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be either decreased or increased depending on the direction of the DC field

The under voltage relay can be used for?

Last Answer : The under voltage relay can be used for generators, busbars, transformers, motors.

What equipment is used to measure voltage?

Description : What equipment is used to measure voltage?

Last Answer : Voltmeter is used to measure voltage.

Define Dielectric Strength for transformer oil. State its value for new transformer oil.

Description : Define Dielectric Strength for transformer oil. State its value for new transformer oil.

Last Answer : Dielectric strength is defined as the maximum voltage that can be applied to across to the Fulid with out electrical breakdown is called Dielectric strength.

Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Description : Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Last Answer : (i) Polyvinyl Carbide(PVC):it is used in insulation of wires and cables in domestic wiring as well as in aircraft and factory wiring (any one)  (ii) Glass: 1) Alkaline glasses are used for ... with wax or varnishes are used in windings of magnet coils and small medium sized mechanics (any one) 

State any four dielectric materials.

Description : State any four dielectric materials.

Last Answer : Ceramics, distilled water, paper, mica, polyethylene, and glass. Metal oxides

What is dielectric strength of an insulating material? What is its unit?

Description : What is dielectric strength of an insulating material? What is its unit?

Last Answer : Dielectric Strength: The dielectric strength of an insulating material is the maximum voltage which the insulating medium can withstand without breakdown. Unit is volts per millimeter (V/mm), or kV/mm or kV/cm

The power factor of dielectric :

Description : The power factor of dielectric :  (A) is a function of temperature of the dielectric only (B) depends only on voltage stress to which the dielectric is stressed (C) always constant (D) both (A) and (B)

Last Answer : The power factor of dielectric :  (A) is a function of temperature of the dielectric only (B) depends only on voltage stress to which the dielectric is stressed (C) always constant (D) both (A) and (B)

The bridge most suited for accurate measurement of relative permittivity of dielectric materials is

Description : The bridge most suited for accurate measurement of relative permittivity of dielectric materials is (A) Carey Foster Bridge (B) Anderson’s bridge (C) Heaviside Bridge modified by Campbell. (D) Schering Bridge.

Last Answer : The bridge most suited for accurate measurement of relative permittivity of dielectric materials is Schering Bridge.

Dielectric loss in a capacitor is best measured by

Description : Dielectric loss in a capacitor is best measured by (A) Wien Bridge (B) Schering Bridge (C) Anderson Bridge (D) Heaviside-Campbell Equal Ratio Bridge

Last Answer : Dielectric loss in a capacitor is best measured by Schering Bridge

The dielectric strength of transformer oil is expected to be?

Description : The dielectric strength of transformer oil is expected to be?

Last Answer : The dielectric strength of transformer oil is expected to be 33 kV.

Can underfloor heating be installed under the wooden floor ?

Description : Can underfloor heating be installed under the wooden floor ?

Last Answer : Under-floor hydronic or steam heat can certainly be installed underneath wooden floors. I have personally installed one instance of hydronic (hot water) heat system under wooden flooring, and have demolished ... heat, but I have visited such places on many occasions and found them very comfortable.

What is the best cost effective way to use central heating.

Description : What is the best cost effective way to use central heating.

Last Answer : no don’t close the doors. The air needs to recycle itself, so you need proper circulation. close vents in rooms you don’t use and use directional vents pointing down (winter months) in the rooms you do. One last thing, make sure you have a clean filter.

How to Install Baseboard Heating

Description : How to Install Baseboard Heating

Last Answer : How to Install Baseboard Heating If you have a small apartment or room that you want to heat in an efficient manner, one effective method is by using electric baseboard heating. Installing it yourself might seem ... these steps and you're sure to have a cozy and warm indoor area, all the time.

How to Make a Heating Pad ?

Description : How to Make a Heating Pad ?

Last Answer : A heating pad is a very important item to have around in the household. Whether it's a headache, menstrual cramps or other pains, a heating pad would make for a great help. This heating pad is also made ... is that there are a myriad of ways we can use for things that we think are no longer useful.

How to install autonomous heating?

Description : How to install autonomous heating?

Last Answer : Autonomous heating and hot water supply is gaining popularity and is used not only in winter, but also in summer. The reason for this, as a rule, is large bills from utilities, as well as the ... a boiler, you should not save on the reliability of the boiler, on control equipment and on service.

State advantages of electric heating over other types of heating methods.

Description : State advantages of electric heating over other types of heating methods.

Last Answer : Advantages of Electric heating over the other types of heating methods: 1. It can be put into service immediately. 2. No standby losses. 3. High efficiency. 4. More economical ... low attention and supervision. 14. Protection against overheating can be provided by suitable switch gear. 

Enlist any four advantages of induction heating.

Description : Enlist any four advantages of induction heating. 

Last Answer : Advantages of Induction heating https://youtu.be/RcdH_74VJz0

_________ is used for heating non -conducting materials.

Description : _______ is used for heating non -conducting materials.  (1) Eddy current heating (2) Arc heating (3) Induction heating (4) Dielectric heating

Last Answer : Dielectric heating is used for heating non -conducting materials. 

can induction heating is use for both magnetic and non magnetic material ?

Last Answer : Yes, Induction heating is used for both magnetic and non-magnetic materials.

The arc voltage in a circuit breaker is :

Description : The arc voltage in a circuit breaker is :

Last Answer : The arc voltage in a circuit breaker is : in phase with the arc current

The motor used for electric traction is

Description : The motor used for electric traction is  (1) D.C. shunt motor (3) D.C. series motor  (2) D.C. compound motor (4) Synchronous motor

Last Answer : The motor used for electric traction is D.C. series motor

Spot welding is used for

Description : Spot welding is used for (1) Thin metal (3) Castings only (2) Rough and irregular surface (4) Thick sections

Last Answer : Spot welding is used for Thin metal

The electrode rod used for welding uses a coating on it

Description : The electrode rod used for welding uses a coating on it 

Last Answer : The electrode rod used for welding uses a coating on it  to give a vapour to serve as a shielding gas to protect the weld area from atmospheric contamination and to provide slag to protect the welded area

Which type of motor is used in lift?

Description : Which type of motor is used in lift?

Last Answer : Synchronous motor

Any recommendations for wood stoves?

Description : Any recommendations for wood stoves?

Last Answer : We had a fireplace insert decades ago. It put out heat, of course, but in no way compared to our free standing, cast iron fireplace which could heat up a small city . It looked cool to me; that’s a matter of taste of whether you like a rustic look. For safety, we never gave it a second thought.

What type of furnace do I need?

Description : What type of furnace do I need?

Last Answer : What is your current heat source for the baseboard heaters? For example, are they electric baseboard heaters or hot water/steam baseboard heaters?

Can you recommend a good space heater?

Description : Can you recommend a good space heater?

Last Answer : I suggest a ceramic heater because it is cool to the touch and puts out a lot of heat. I have a small one that heats up my entire family room in the basement.

Dielectric heating is used for heating

Description : Dielectric heating is used for heating  A) Wood B)Aluminium C) Magnetic steel D) Copper

Last Answer : Dielectric heating is used for heating Wood 

Why does surge impedance loading (SIL) increase with increase in voltage level?

Description : Why does surge impedance loading (SIL) increase with increase in voltage level?

Last Answer : Answer: SIL varies as the square of the operating voltage, so SIL increases with increase in voltage level

Electro-mechanical voltage regulators are generally used in (a) reactors (b) generators (c) transformers (d) all of the above

Description : Electro-mechanical voltage regulators are generally used in (a) reactors (b) generators (c) transformers (d) all of the above

Last Answer : (b) generators

When an alternator connected to the bus-bar is shut down the bus-bar voltage will (a) fall (b) rise (c) remain unchanged (d) none of the above

Description : When an alternator connected to the bus-bar is shut down the bus-bar voltage will (a) fall (b) rise (c) remain unchanged (d) none of the above

Last Answer : (c) remain unchanged

The frequency of voltage generated, in case of generators, can be increased by (a) using reactors (b) increasing the load (c) adjusting the governor (d) reducing the terminal voltage (e) none of the above

Description : The frequency of voltage generated, in case of generators, can be increased by (a) using reactors (b) increasing the load (c) adjusting the governor (d) reducing the terminal voltage (e) none of the above

Last Answer : (c) adjusting the governor

When the interconnector between two stations has large reactance (a) the transfer of power will take place with voltage fluctuation and noise (b) the transfer of power will take place with least loss (c) the stations will fall out of step be¬cause of large angular displacement between the stations (d) none of the above

Description : When the interconnector between two stations has large reactance (a) the transfer of power will take place with voltage fluctuation and noise (b) the transfer of power will take place with least loss ... out of step be¬cause of large angular displacement between the stations (d) none of the above

Last Answer : (c) the stations will fall out of step be¬cause of large angular displacement between the stations

For transmission of power over a distance of 500 km, the transmission voltage should be in the range (a) 150 to 220 kV (b) 100 to 120 kV (c) 60 to 100 kV (d) 20 to 50 kV

Description : For transmission of power over a distance of 500 km, the transmission voltage should be in the range (a) 150 to 220 kV (b) 100 to 120 kV (c) 60 to 100 kV (d) 20 to 50 kV

Last Answer : (a) 150 to 220 kV

Constant voltage transmission entails the following disadvantage (a) large conductor area is required for same power transmission (b) short-circuit current of the system is increased (c) either of the above (d) none of the above

Description : Constant voltage transmission entails the following disadvantage (a) large conductor area is required for same power transmission (b) short-circuit current of the system is increased (c) either of the above (d) none of the above

Last Answer : (b) short-circuit current of the system is increased

In a tap changing transformer, the tappings are provided on (a) primary winding (b) secondary winding (c) high voltage winding (d) any of the above

Description : In a tap changing transformer, the tappings are provided on (a) primary winding (b) secondary winding (c) high voltage winding (d) any of the above

Last Answer : (b) secondary winding

Which of the following equipment, for regulating the voltage in distribution feeder, will be most economical ? (a) Static condenser (b) Synchronous condenser (c) Tap changing transformer (d) Booster transformer

Description : Which of the following equipment, for regulating the voltage in distribution feeder, will be most economical ? (a) Static condenser (b) Synchronous condenser (c) Tap changing transformer (d) Booster transformer

Last Answer : (d) Booster transformer

For transmission of power over a distance of 200 km, the transmission voltage should be (a) 132 kV (b) 66 kV (c) 33 kV (d) 11 kV

Description : For transmission of power over a distance of 200 km, the transmission voltage should be (a) 132 kV (b) 66 kV (c) 33 kV (d) 11 kV

Last Answer : (a) 132 kV

The voltage drop, for constant voltage transmission is compensated by installing (a) inductors (b) capacitors (c) synchronous motors (d) all of above (e) none of the above

Description : The voltage drop, for constant voltage transmission is compensated by installing (a) inductors (b) capacitors (c) synchronous motors (d) all of above (e) none of the above

Last Answer : (c) synchronous motors