Which of the following statements is incorrect ? (A) Superposition theorem is useful for Linear and Non-linear

Which of the following statements is incorrect ?

(A) Superposition theorem is useful for Linear and Non-linear circuit analysis when several sources are present in the circuit.

(B) Thevenin’s equivalent network consists of one voltage source in series with an impedance.

(C) Norton’s equivalent network consists of one current source in parallel with an independence.

(D) When both the load and source impedances are purely resistive, maximum power transfer is achieved under the condition : Load Resistance = Source Resistance
by

1 Answer

Answer :

Which of the following statements is incorrect ?

(A) Superposition theorem is useful for Linear and Non-linear circuit analysis when several sources are present in the circuit.

(B) Thevenin’s equivalent network consists of one voltage source in series with an impedance.

(C) Norton’s equivalent network consists of one current source in parallel with an independence.

(D) When both the load and source impedances are purely resistive, maximum power transfer is achieved under the condition : Load Resistance = Source Resistance

by

Related questions

The superposition theorem requires as many circuits to be solved as there are?

Description : The superposition theorem requires as many circuits to be solved as there are?

Last Answer : The superposition theorem requires as many circuits to be solved as there are sources.

The superposition theorem is applicable to?

Description : The superposition theorem is applicable to?

Last Answer : The superposition theorem is applicable to linear responses only.

The concept on which Superposition theorem is based is?

Description : The concept on which Superposition theorem is based is?

Last Answer : The concept on which Superposition theorem is based is linearity.

Superposition theorem can be applied only to circuits having?

Description : Superposition theorem can be applied only to circuits having?

Last Answer : Superposition theorem can be applied only to circuits having linear bilateral elements.

State Superposition Theorem.

Description : State Superposition Theorem.

Last Answer : Superposition Theorem: In any linear, bilateral, multisource network the voltage across or the current through any branch is given by algebraic sum of all individual voltages or currents caused ... sources acting alone with all other sources replaced by their internal resistances if any.

State superposition theorem applied to D.C. circuits.

Description : State superposition theorem applied to D.C. circuits.

Last Answer : Superposition Theorem applied to D.C. circuits: Superposition theorem states that in any linear, bilateral, multisource network, the response (voltage across any element or current through any ... each source acting alone, while the other sources are replaced by their internal resistances.

The superposition theorem is based on the concept of ?

Description : The superposition theorem is based on the concept of ?

Last Answer : The superposition theorem is based on the concept of Linearity.

Millman's theorem yields equivalent

Description : Millman's theorem yields equivalent  (1) Impedance or Resistance (3) Voltage source (2) Current source (4) Voltage or Current source

Last Answer : Millman's theorem yields equivalent Voltage or Current source

While calculating Rth in Thevenin's theorem and Norton equivalent?

Description : While calculating Rth in Thevenin's theorem and Norton equivalent?

Last Answer : While calculating Rth in Thevenin's theorem and Norton equivalent all independent sources are made dead.

In Thevenin's theorem, to find Z?

Description : In Thevenin's theorem, to find Z?

Last Answer : In Thevenin's theorem, to find Z all independent voltage sources are short circuited and all independent current sources are open circuited.

Millman's theorem yields?

Description : Millman's theorem yields?

Last Answer : Millman's theorem yields equivalent voltage or current source.

Application of Norton's theorem to a circuit yields?

Description : Application of Norton's theorem to a circuit yields?

Last Answer : Application of Norton's theorem to a circuit yields equivalent current source and impedance in series.

Superposition

Description : Superposition 

Last Answer : Superposition 1 : https://youtu.be/3C3daEzmtuM Superposition 2 : https://youtu.be/mURACJC2jAU Superposition 3 : https://youtu.be/nG715RGdsvk Superposition 4 : https://youtu.be/qCHpYc8tOUs ... Superposition 9 : https://youtu.be/8cA91sqz2AI Superposition 10 : https://youtu.be/2nYcmOtRmaY

State the Thevenin’s theorem. Also write stepwise procedure for applying Thevenin’s theorem to simple circuits.

Description : State the Thevenin’s theorem. Also write stepwise procedure for applying Thevenin’s theorem to simple circuits.

Last Answer : Thevenin's Theorem: Any two terminal circuit having number of linear impedance and sources (voltage, current, dependent, independent) can be represented by a simple equivalent circuit consisting of a single voltage ... 's equivalent circuit: Step V: Determination of Load current:

Maximum Power Transfer Theorem 1

Description : Maximum Power Transfer Theorem 1

Last Answer : Maximum Power Transfer Theorem 1

Write the steps for finding the current through an element by Thevenin’s theorem.

Description : Write the steps for finding the current through an element by Thevenin’s theorem.

Last Answer : Steps to find Thevenin's equivalent circuit, taking an example is as follows:  1. From the given circuit (fig.a),Remove RL from the terminals A and B and redraw the circuit as shown in ... (fig.d)from where it was temporarily removed earlier.  Current flowing through RL is given by 

State Thevenin’s Theorem.

Description : State Thevenin’s Theorem.

Last Answer : Any two terminal circuit having number of linear impedances and sources (voltage, current, dependent, independent) can be represented by a simple equivalent circuit consisting of a single voltage ... circuit across the two terminals, when the sources are replaced by their internal impedances. 

State maximum power transfer theorem for DC circuit.

Description : State maximum power transfer theorem for DC circuit.

Last Answer : Maximum power transfer theorem for DC circuit: The maximum power transfer theorem states that the source or a network transfers maximum power to load only when the load resistance is equal ... removed (disconnected) ii) All internal independent sources are replaced by their internal resistances.

As per Shannon’s channel capacity theorem, if samples are transmitted in ‘T’ seconds over a noisy channel

Description : As per Shannon’s channel capacity theorem, if samples are transmitted in ‘T’ seconds over a noisy channel which is bandlimited to ‘B’ Hz. The number of samples ‘n’ is given by (symbols/notations carry their usual meaning) A) B/T B) T/B C) 2BT D) BT/2 

Last Answer : As per Shannon’s channel capacity theorem, if samples are transmitted in ‘T’ seconds over a noisy channel which is bandlimited to ‘B’ Hz. The number of samples ‘n’ is given by ( ... /notations carry their usual meaning) A) B/T B) T/B C) 2BT D) BT/2 

Norton’s theorem states that a complex network connected to a load can be replaced with an equivalent

Description : Norton’s theorem states that a complex network connected to a load can be replaced with an equivalent impedance (A) in series with a current source (B) in parallel with a voltage source (C) in series with a voltage source (D) in parallel with a current source

Last Answer : in parallel qith current source

According to Lami's theorem?

Last Answer : According to Lami's theorem if three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two.

Can you apply Thevenin's theorem in an AC circuit?

Description : Can you apply Thevenin's theorem in an AC circuit?

Last Answer : It  can  be  applied  to  AC  circuits

In application of superposition theorem, one is required to solve as many circuits as there are

Description : In application of superposition theorem, one is required to solve as many circuits as there are  1. Nodes 2. Branches 3. Meshes 4. Sources 

Last Answer : In application of superposition theorem, one is required to solve as many circuits as there are Sources 

Castigliano's first theorem is applicable (A) For statically determinate structures only (B) When the system behaves elastically (C) Only when principle of superposition is valid(D) None of the above

Description : Castigliano's first theorem is applicable (A) For statically determinate structures only (B) When the system behaves elastically (C) Only when principle of superposition is valid (D) None of the above

Last Answer : (C) Only when principle of superposition is valid

Besides a method of trial and error, which of the following methods is employed for solution of network problems in interconnected system ? (a) Circulating current method (b) Thevenin's theorem (c) Superposition of currents (d) Direct application of Kirehhoffs laws (e) All of the above

Description : Besides a method of trial and error, which of the following methods is employed for solution of network problems in interconnected system ? (a) Circulating current method (b) Thevenin's theorem (c) Superposition of currents (d) Direct application of Kirehhoffs laws (e) All of the above

Last Answer : (e) All of the above

State and explain superposition theorem.

Description : State and explain superposition theorem.

Last Answer : Superposition theorem states that: In a linear circuit with several sources the voltage and current responses in any branch is the algebraic sum of the voltage and current responses due to each source acting ... branch to find the response on the branch due to the combined effect of all the sources.

State superposition theorem with suitable example

Description : State superposition theorem with suitable example

Last Answer : Superposition theorem: Superposition theorem states that in any linear network containing two or more sources, the response (current) in any element is equal to the algebraic sum of the ... by individual sources acting alone, while the other sources are replaced by their internal resistances.

Superposition theorem is not applicable to network containing:

Description : Superposition theorem is not applicable to network containing: (1) Non linear element (2) Dependent voltage source (3) Dependent current source (4) Transformer. 

Last Answer : A

Superposition theorem stays valid for a : -

Description : Superposition theorem stays valid for a : -  a) LTI system b) Discrete system c) LT systems d) None of these

Last Answer : Superposition theorem stays valid for a : - LTI system

Superposition theorem can be applied to?

Last Answer : Thesuperposition theoremforelectrical circuitsstates that for a linear system the response (voltageorcurrent) in any branch of a bilaterallinear circuithaving more than one independent source equals the ... alone, where all the other independent sources are replaced by their internalimpedances.

Principle of superposition is applicable when (A) Deflections are linear functions of applied forces (B) Material obeys Hooke's law (C) The action of applied forces will be affected by small deformations of the structure (D) None of the above

Description : Principle of superposition is applicable when (A) Deflections are linear functions of applied forces (B) Material obeys Hooke's law (C) The action of applied forces will be affected by small deformations of the structure (D) None of the above

Last Answer : (A) Deflections are linear functions of applied forces

Which of the following theorems can be applied to any network linear or non-linear, active or

Description : Which of the following theorems can be applied to any network linear or non-linear, active or passive, time variant or time invariant?   (a) Thevenin Theorem (b) Norton Theorem (c) Telligen Theorem (d) Superposition Theorem 

Last Answer : Which of the following theorems can be applied to any network linear or non-linear, active or passive, time variant or time invariant? (a) Thevenin Theorem (b) Norton Theorem (c) Telligen Theorem (d) Superposition Theorem 

A non-linear network does not satisfy?

Description : A non-linear network does not satisfy?

Last Answer : A non-linear network does not satisfy both homogeneity as well as superposition condition.

To find current in a resistance connected in a network, Thevenin's theorem is used VTH = 20 V and RTH = 5 Ω.

Description : To find current in a resistance connected in a network, Thevenin's theorem is used VTH = 20 V and RTH = 5 Ω. The current through the resistance: (1) is 4 A (2) is 4 A or less (3) is less than 4 A (4) May be 4 A or less or more than 4 A

Last Answer : To find current in a resistance connected in a network, Thevenin's theorem is used VTH = 20 V and RTH = 5 Ω. The current through the resistance: is less than 4 A 

A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the

Description : A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will

Last Answer : A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will not change

which completes the flow of the linear pair theorem?

Description : which completes the flow of the linear pair theorem?

Last Answer : straight angle

The Stoke’s theorem can be used to find which of the following? a) Area enclosed by a function in the given region b) Volume enclosed by a function in the given region c) Linear distance d) Curl of the function

Description : The Stoke’s theorem can be used to find which of the following? a) Area enclosed by a function in the given region b) Volume enclosed by a function in the given region c) Linear distance d) Curl of the function

Last Answer : a) Area enclosed by a function in the given region

Production of beats is a result of the phenomenon of (a) Resonance (b) Interference (c) Reflection (d) Superposition

Description : Production of beats is a result of the phenomenon of (a) Resonance (b) Interference (c) Reflection (d) Superposition

Last Answer : Ans:(b)

The first critical speed of an automobile running on a sinusoidal road is calculated by (modeling it as a single degree of freedom system) A Resonance B Approximation C Superposition D Rayleigh quotient

Description : The first critical speed of an automobile running on a sinusoidal road is calculated by (modeling it as a single degree of freedom system) A Resonance B Approximation C Superposition D Rayleigh quotient

Last Answer : A Resonance

The first critical speed of an automobile running on a sinusoidal road is calculated by (modeling it as a single degree of freedom system) a) Resonance b) Approximation c) Superposition d) Rayleigh quotient

Description : The first critical speed of an automobile running on a sinusoidal road is calculated by (modeling it as a single degree of freedom system) a) Resonance b) Approximation c) Superposition d) Rayleigh quotient

Last Answer : a) Resonance

Define the principles of superposition of waves.

Description : Define the principles of superposition of waves. 

Last Answer : Principle of superposition of wave: When two waves travelling through a medium arrive at a point simultaneously, each wave produces its own displacement at that point. The resultant displacement at that point is equal to the vector sum of the individual displacement of the two waves.

Assertion (A):A pair of linear equations has no solution (s) if it represented by intersecting lines graphically. Reason (R) : If the pair of lines are intersecting, then the pair has unique solution and is called consistent pair of equations. (a) Both A and R are correct; R is the correct explanation of A. (b) Both A and R are correct; R is not the correct explanation of A. (c) A is correct; R is incorrect. (d) R is correct; A is incorrect.

Description : Assertion (A):A pair of linear equations has no solution (s) if it represented by intersecting lines graphically. Reason (R) : If the pair of lines are intersecting, then the pair has unique solution and is called ... of A. (c) A is correct; R is incorrect. (d) R is correct; A is incorrect.

Last Answer : (d) R is correct; A is incorrect.

Assertion (A) : The value of k for which the system of linear equations kx+2y+1=0 and 6x+4y-5=0 has a unique solution is 3. Reason (R):The system of linear equations a1x + b1y + c1= 0 and a2x + b2y + c2 = 0 has a unique solution if (a) Both A and R are correct; R is the correct explanation of A. (b) Both A and R are correct; R is not the correct explanation of A. (c) A is correct; R is incorrect. (d) R is correct; A is incorrect.

Description : Assertion (A) : The value of k for which the system of linear equations kx+2y+1=0 and 6x+4y-5=0 has a unique solution is 3. Reason (R):The system of linear equations a1x + b1y + c1= 0 and a2x + ... not the correct explanation of A. (c) A is correct; R is incorrect. (d) R is correct; A is incorrect.

Last Answer : (d) R is correct; A is incorrect.

Which one of the following statements is incorrect? (a) The principle of countercurrent flow facilitates efficient respiration in gills of fishes. (b) The residual air in lungs slightly decreases the efficiency of respiration in mammals. (c) The presence of non-respiratory air sacs, increases the efficiency of respiration in birds. (d) In insects, circulating body fluids serve to distribute oxygen to tissues.

Description : Which one of the following statements is incorrect? (a) The principle of countercurrent flow facilitates efficient respiration in gills of fishes. (b) The residual air in lungs slightly decreases the ... in birds. (d) In insects, circulating body fluids serve to distribute oxygen to tissues.

Last Answer : (b) The residual air in lungs slightly decreases the efficiency of respiration in mammals.

Which is the correct statement(s) for Non Recursive predictive parser? S1: First(α) = {t | α => * t β for some string β } => *tβ S2: Follow(X) = { a | S => * αXa β for some strings α and β } (A) Both statements S1 and S2 are incorrect. (B) S1 is incorrect and S2 is correct. (C) S1 is correct and S2 is incorrect. (D) Both statements S1 and S2 are correct.

Description : Which is the correct statement(s) for Non Recursive predictive parser? S1: First(α) = {t | α => * t β for some string β } => *tβ S2: Follow(X) = { a | S => * αXa β for some strings ... and S2 is correct. (C) S1 is correct and S2 is incorrect. (D) Both statements S1 and S2 are correct. 

Last Answer : (D) Both statements S1 and S2 are correct.

Which of the following statements is incorrect for Parallel Virtual Machine (PVM)? (A) The PVM Communication model provides asynchronous blocking send, asynchronous blocking receive and non-blocking receive function. (B) Message buffers are allocated dynamically. (C) The PVM communication model assumes that any task can send a message to any other PVM task and that there is no limit to the size or number of such messages. (D) In PVM Model, the message order is not preserved.

Description : Which of the following statements is incorrect for Parallel Virtual Machine (PVM)? (A) The PVM Communication model provides asynchronous blocking send, asynchronous blocking receive and non-blocking receive function. ... of such messages. (D) In PVM Model, the message order is not preserved. 

Last Answer : (D) In PVM Model, the message order is not preserved.

what- Complete the Angle-Angle-Side Congruence Theorem.If two angles and a non-included side of one triangle are congruent to two angles and a (1) _____ non-included side of another triangle, then the triangles are (2)?

Description : what- Complete the Angle-Angle-Side Congruence Theorem.If two angles and a non-included side of one triangle are congruent to two angles and a (1) _____ non-included side of another triangle, then the triangles are (2)?

Last Answer : (1) corresponding, (2) congruent

When a vector is irrotational, which condition holds good? a) Stoke’s theorem gives non-zero value b) Stoke’s theorem gives zero value c) Divergence theorem is invalid d) Divergence theorem is valid

Description : When a vector is irrotational, which condition holds good? a) Stoke’s theorem gives non-zero value b) Stoke’s theorem gives zero value c) Divergence theorem is invalid d) Divergence theorem is valid

Last Answer : b) Stoke’s theorem gives zero value

If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Description : If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Last Answer : If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is