In a single-phase transformer, the magnetizing current is

In a single-phase transformer, the magnetizing current is

(A) in phase with the no-load current

(B) in quadrature with the no-load current

(C) the product of no-load current and power factor

(D) in phase with the flux in the core
by

1 Answer

Answer :

In a single-phase transformer, the magnetizing current is in phase with the flux in the core

by

Related questions

In a 3 -phase alternator, if there is only magnetizing armature reaction, the load is :

Description : In a 3 -phase alternator, if there is only magnetizing armature reaction, the load is :  (A) capacitive (B) inductive (C) resistive (D) inductive and resistive

Last Answer : In a 3 -phase alternator, if there is only magnetizing armature reaction, the load is : capacitive 

When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a

Description : When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is

Last Answer : When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is √3/2

The sequence components of current of a single-phase load connected to a 3-phase system are

Description : The sequence components of current of a single-phase load connected to a 3-phase system are (A) equal positive and negative sequence components (B) equal positive, negative and zero sequence components (C) vector sum of sequence currents is zero (D) algebraic sum of sequence currents is zero

Last Answer : The sequence components of current of a single-phase load connected to a 3-phase system are equal positive, negative and zero sequence components

A 230 V/460 V single-phase transformer operating at 20 A and unity power factor has primary referred

Description : A 230 V/460 V single-phase transformer operating at 20 A and unity power factor has primary referred resistance of 0.2 Ω and reactance of 0.5 Ω. The approximate primary induced emf is (A) 216 V (B) 226 V (C) 234 V (D) 236 V

Last Answer : A 230 V/460 V single-phase transformer operating at 20 A and unity power factor has primary referred resistance of 0.2 Ω and reactance of 0.5 Ω. The approximate primary induced emf is 226 V

The operating point of a protective current transformer is near the

Description : The operating point of a protective current transformer is near the

Last Answer : The operating point of a protective current transformer is near the Ankle point

Step-down transformer converts high voltage and low current into:

Description : Step-down transformer converts high voltage and low current into:  (A) How voltage and high current (B) High voltage and low current (C) Low voltage and high current (D) None of the above

Last Answer : Step-down transformer converts high voltage and low current into: Low voltage and high current

The inrush current of a transformer at no load is maximum if the supply voltage is switched on

Description : The inrush current of a transformer at no load is maximum if the supply voltage is switched on  (1) at peak voltage value (2) at zero voltage value (3) at half voltage value (4) at 0.866 time voltage value

Last Answer : At 0.866 time voltage value

The inverse definite mean time relays are used for over current and earth fault protection of transformer against?

Last Answer : The inverse definite mean time relays are used for over current and earth fault protection of transformer against internal short-circuits.

When secondary of a current transformer is open-circuited its iron core will be?

Description : When secondary of a current transformer is open-circuited its iron core will be?

Last Answer : When secondary of a current transformer is open-circuited its iron core will be hot because of heavy iron losses taking place in it due to high flux density.

The secondary of a current transformer is always short-circuited under operating conditions because it?

Description : The secondary of a current transformer is always short-circuited under operating conditions because it?

Last Answer : The secondary of a current transformer is always short-circuited under operating conditions because it avoids core saturation and high voltage induction.

For a transformer, operating at constant load current, maximum efficiency will occur at?

Description : For a transformer, operating at constant load current, maximum efficiency will occur at?

Last Answer : For a transformer, operating at constant load current, maximum efficiency will occur at unity power factor.

In a step-down transformer, there is a change of 15 A in the load current. This results in change of supply current of?

Description : In a step-down transformer, there is a change of 15 A in the load current. This results in change of supply current of?

Last Answer : In a step-down transformer, there is a change of 15 A in the load current. This results in change of supply current of less than 15A.

Single-phase mid-point controlled rectifier with RL load

Description : Single-phase mid-point controlled rectifier with RL load

Last Answer : Single-phase mid-point controlled rectifier with RL load : The circuit configuration of single-phase midpoint controlled rectifier is shown in the figure. During positive half-cycle of ... some part of next positive half-cycle of voltage with reversed polarity can appear across load.

Single-phase Midpoint controlled rectifier with Resistive load

Description : Single-phase Midpoint controlled rectifier with Resistive load

Last Answer : Single-phase Midpoint controlled rectifier with Resistive load:  1) During positive half cycle of AC supply, a is positive with respect to b , this makes T1 forward biased and T2 is reverse ... voltage reverses the polarity and T2 is turned off. The operation is as shown in waveforms.

An additional condition for parallel operation of three-phase transformers over single-phase transformers is that

Description : An additional condition for parallel operation of three-phase transformers over single-phase transformers is that

Last Answer : An additional condition for parallel operation of three-phase transformers over single-phase transformers is that the transformers should belong to the same vector group

In a single-phase induction motor, the operating direction is determined by the ________

Description : In a single-phase induction motor, the operating direction is determined by the ________ A) Rotor B) Stator C) Starting circuit D) None of these

Last Answer : In a single-phase induction motor, the operating direction is determined by the Starting circuit

The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a

Description : The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ (A) directly proportional to α and Φ (B) ... proportional to α and inversely proportional to Φ (D) directly proportional to Φ and inversely proportional to α

Last Answer : The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ directly proportional to α and inversely proportional to Φ

A 230 V, 50 Hz phase controlled single-phase full-controlled SCR bridge converter draws 15 A constant dc

Description : A 230 V, 50 Hz phase controlled single-phase full-controlled SCR bridge converter draws 15 A constant dc current. If the source inductance is 3 mH, the drop in dc output voltage is (A) 4.5 V (B) 6.75 V (C) 9 V (D) 13.5 V

Last Answer : A 230 V, 50 Hz phase controlled single-phase full-controlled SCR bridge converter draws 15 A constant dc current. If the source inductance is 3 mH, the drop in dc output voltage is 9 V

In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load,

Description : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is (A) sinusoidal current (B) constant dc current (C) continuous rectangular pulses (D) alternating rectangular pulses

Last Answer : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is alternating rectangular pulses

In a single-phase induction motor when the rotor is stationary and voltage is applied to the stator, then

Description : In a single-phase induction motor when the rotor is stationary and voltage is applied to the stator, then (A) the flux is constant (B) the flux first decreases and then increases in ... increases and decreases in the opposite direction with the same magnitude (D) current flows through the rotor

Last Answer : In a single-phase induction motor when the rotor is stationary and voltage is applied to the stator, then the flux first decreases and then increases in the same direction

The starting winding of a single-phase motor is placed in?

Last Answer : The starting winding of a single-phase motor is placed in stator.

The capacitors used in single-phase capacitor motors have no?

Last Answer : The capacitors used in single-phase capacitor motors have no polarity marking.

If starting winding of a single-phase induction motor is left in the circuit, it will?

Last Answer : If starting winding of a single-phase induction motor is left in the circuit, it will draw excessive current and overheat.

A single-phase induction motor is?

Last Answer : A single-phase induction motor is inherently non-self-starting with low torque.

The power factor of a single-phase induction motor is usually?

Last Answer : The power factor of a single-phase induction motor is usually lagging.

In a capacitor start single-phase motor, when capacitor is replaced by a resistance?

Last Answer : In a capacitor start single-phase motor, when capacitor is replaced by a resistance motor will continue to run in same direction.

In a shaded pole single-phase motor, the revolving field is produced by the use of?

Last Answer : In a shaded pole single-phase motor, the revolving field is produced by the use of shading coils.

The rotor developed by a single-phase motor at starting is?

Last Answer : The rotor developed by a single-phase motor at starting is zero.

In capacitor start single-phase motors?

Last Answer : In capacitor start single-phase motors current in the starting winding leads the voltage.

If the capacitor of a single-phase motor is short-circuited?

Last Answer : If the capacitor of a single-phase motor is short-circuited the motor will not start.

The stator of phase shifting transformer for use in conjunction with an A.C. potentiometer usually has a?

Last Answer : The stator of phase shifting transformer for use in conjunction with an A.C. potentiometer usually has a two-phase winding.

A phase shifting transformer is used in conjunction with?

Last Answer : A phase shifting transformer is used in conjunction with Drysdale potentiometer.

The magnetizing reactance of a 4 kV/ 400 V, 50 Hz single-phase transformer on low voltage side is 35 Ω.

Description : The magnetizing reactance of a 4 kV/ 400 V, 50 Hz single-phase transformer on low voltage side is 35 Ω. The magnetizing reactance on the high voltage side is (A) 0.35 Ω (B) 3.5 Ω (C) 350 Ω (D) 3500 Ω

Last Answer : 3500

Eddy current damping cannot be used for moving iron instrument because

Description : Eddy current damping cannot be used for moving iron instrument because

Last Answer : Eddy current damping cannot be used for moving iron instrument because the presence of a permanent magnet required for such purpose would affect the deflection and hence the reading of the instrument

Alternating current is measured by?

Last Answer : Alternating current is measured by induction ammeter.

The gravity controlled instrument has crowded scale because current is proportional to?

Last Answer : The gravity controlled instrument has crowded scale because current is proportional to sine of deflection angle.

A direct current can be measured by?

Last Answer : A direct current can be measured by a D.C. potentiometer in conjunction with a standard resistance.

For measuring current at high frequency we should use?

Last Answer : For measuring current at high frequency we should use thermocouple instrument.

The disc of an instrument using eddy current damping should be of?

Last Answer : The disc of an instrument using eddy current damping should be of conducting and non-magnetic material.

The chemical effect of current is used in?

Last Answer : The chemical effect of current is used in D.C. ammeter hour meter.

An induction meter can handle current up to?

Last Answer : An induction meter can handle current up to 100 A.

What type of meter is used to measure current?

Description : What type of meter is used to measure current?

Last Answer : Ammeter

What is the supply rated o/p if two single phase transformer connect to give three phase o/p from a three phase I/p?

Description : What is the supply rated o/p if two single phase transformer connect to give three phase o/p from a three phase I/p?

Last Answer : A. Each transformer is only capable of supplying 86.6%of its o/p rating

How to connect two single phase transformer to give three phase o/p from a three phase I/p ?

Description : How to connect two single phase transformer to give three phase o/p from a three phase I/p ?

Last Answer : A. They would have to connect in an open-delta.

Can a Single Phase Transformer be used on a Three Phase source?

Description : Can a Single Phase Transformer be used on a Three Phase source?

Last Answer : A. Any single phase transformer can be used on a three phase source by connecting the primary leads to any two wires of a three phase system, regardless of whether the source is three phase 3-wire or three phase 4 wire. The transformer output will be single phase.

What are the advantages of three phase transformer over three single phase transformer?

Description : What are the advantages of three phase transformer over three single phase transformer?

Last Answer : 1.Saving in iron material 2. Small size 3. Less transformer oil 4. Economical 5. Higher efficiency

What are the advantages of three single phase transformer over three phase transformer?

Description : What are the advantages of three single phase transformer over three phase transformer?

Last Answer : 1. Continuity of supply 2. Less Installation of cost 3. Easy transportation 4.Stand by function 5.Unbalanced load supply

What is single and three phase transformer?

Description : What is single and three phase transformer?

Last Answer : The transformer which works on single phase is called single phase transformer. The transformer which works on three phase is called three phase transformer.

Can a Single Phase Transformer be used on a Three Phase source?

Description : Can a Single Phase Transformer be used on a Three Phase source?

Last Answer : Yes. Any single phase transformer can be used on a three phase source by connecting the primary leads to any two wires of a three phase system, regardless of whether the source is three phase 3-wire or three phase 4-wire. The transformer output will be single phase.

Single phase transformer

Description : Single phase transformer

Last Answer : Single phase Transformer Transformer