What does the fixing solution in developing X rays do:
A. Removes unexposed silver halide crystals
B. Removes exposed silver halide
C. Fixes the developed film

1 Answer

Answer :

A. Removes unexposed silver halide crystals

Related questions

Description : Function of sodium thiosulphate (hypo) in development of photographic film/plate is to (A) Brighten the faint images (B) Remove metallic silver (C) Convert silver chloride to silver (D) Remove unexposed silver halide

Last Answer : (D) Remove unexposed silver halide

Description : When the developing solution is correctly mixed and the x ray film is being developed for normal time but the solution is too warm, the outcoming film will be: A. Too light B. Too dark C. Fogged

Last Answer : C. Fogged

Description : Which halide is used in making sensitive emulsion on photographic film? (1) Sodium chloride (2) Silver bromide (3) Silver iodide (4) Silver chloride

Last Answer : (2) Silver bromide Explanation: Silver bromide, a soft, paleyellow, water insoluble salt well known for its unusual sensitivity to light. This property has allowed silver halides to become the basis of modern photographic materials.

Description : Which halide is used in making sensitive emulsion on photograhic film? (1) Sodium chloride (2) Silver bromide (3) Silver iodide (4) Silver chloride

Last Answer :  Silver bromide 

Description : Density of film is decreased by increasing the : A. MA B. Exposure time C. Developing time D. Rinsing time

Last Answer : B. Exposure time

Description : What is NOT TRUE about Hydrotherapy (Water Jet): A. Removes pellicle from tooth surface B. Removes dental plaque C. Causes no harm to gingiva

Last Answer : B. Removes dental plaque

Description : What is wrong in regard to (water jet spray) hydrotherapy: A. Does not harm gingivae B. Removes plaque C. Removes required pellicle

Last Answer : B. Removes plaque

Description : The advantage of firing porcelain in vacuum:** A. Reduces size of air-bubbles incorporated thus decreasing porosity B. Removes water before firing, increasing the hardness of porcelain C. Significantly lowers firing temperature

Last Answer : A. Reduces size of air-bubbles incorporated thus decreasing porosity

Description : Calculus attaches to teeth surfaces by: A. Acquired pellicle B. Interlocking to the crystals of the tooth C. Penetrated into enamel and dentine D. Mechanical interlocking E. All of the above

Last Answer : E. All of the above

Description : lass Ionomer Cement sets because of,** A. Acid-Base reaction B. Addition polymerisation reaction C. Growth of glass crystals D. Slip plane locking E. Solvent evaporation

Last Answer : A. Acid-Base reaction

Description : The developing time for dental x ray should be: A. 5 minutes at 20ºC B. At least 10 minutes C. Until it clears up D. 2 minutes at 40ºC

Last Answer : A. 5 minutes at 20ºC

Description : A raised dot on X ray films is to: A. Orient exposure side B. Differentiate between left and right side C. Dip during developing

Last Answer : A. Orient exposure side

Description : The internal structure of crystals was first studied with which of the following? w) x-rays x) isotopes y) electron microscopes z) lasers

Last Answer : ANSWER: W -- X-RAYS

Description : An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the ... - Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Last Answer : a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide

Description : In patients with exposed root surfaces: A. Ask to use low abrasive dentifrices B. It is because of dental hypersensitivity

Last Answer : A. Ask to use low abrasive dentifrices

Description : the pulp horn most likely to be exposed in the preparation of large cavity in permanent molar tooth is,CHECK ITS VERY CONTROVERSIAL QUESTION A. Mesio-Lingual in upper first molars B. Mesio-Buccal in ... first molars D. Mesio-Lingual in lower first molars E. Mesio- Buccal in lower first molar

Last Answer : B. Mesio–Buccal in upper first molars

Description : When the enamel of the tooth is exposed to preparation containing high concentrations of fluoride the major reaction is: M07 A. Sodium fluoride B. Calcium fluoride C. Stannous fluoride D. Fluoroapatite

Last Answer : D. Fluoroapatite

Description : 8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the ... C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Last Answer : A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis)

Description : Which of the following would be ONE possible indication for indirect pulp capping?*** A. Where any further excavation of dentine would result in pulp exposure. B. Removal of caries has exposed the pulp C. When carious lesion has just penetrated DEJ

Last Answer : A. Where any further excavation of dentine would result in pulp exposure.

Description : Would the cost be lower if instead of having old film negatives developed by a pro developer you set-up your own developing room instead?

Last Answer : Better yet, get a scanner that will electronically develop the negatives. I got one for less than $200, There are some out there that are even cheaper than that. That’s my next project, scanning hundreds and hundreds of negatives going back to the late 70s.

Description : The beam that leaves the target is called, A. The primary X-ray B. The electrons ( from the cathode) C. The secondary rays (scattered radiation) D. X-ray photons no

Last Answer : A. The primary X-ray

Description : Why do you take x-rays at different horizontal angulations A. To find more canals B. Tofind more foramina

Last Answer : A. To find more canals

Description : A child has less than the normal number of teeth, the mandibular lateral incisor is larger than usual, on x rays it shows with two roots and two roots canals; your diagnosis is:** A. Dilaceration B. Gemination C. Fusion D. Concrescence E. Taurodontism

Last Answer : C. Fusion

Description : A filter is used in x ray machines to: A. Reduce exposure time B. Remove low energy x rays

Last Answer : B. Remove low energy x rays

Description : Hypoplasia as seen in x rays:** A. Thick enamel surface B. Thin enamel surface C. Sometimes large pulp chamber D. Can not be detected on X rays

Last Answer : D. Can not be detected on X rays

Description : Essential for the diagnosis and treatment plan of orthodontics is: A. Classification B. X rays C. Plaster models

Last Answer : B. X rays

Description : X rays are used in endodontic treatment to: A. Aid in the diagnosis of periapical hard tissue lesion B. Determine the number, location, shape, size and direction of roots and root canals C. Confirm ... root canals D. Evaluate the adequacy of the complete root canal filling E. All of the above

Last Answer : E. All of the above

Description : At the age of four years, the x rays reveal calcification of: A. All deciduous and first permanent molars B. All permanent except of 3rd molars (7-8 yrs old) C. All deciduous D. All permanent

Last Answer : B. All permanent except of 3rd molars (7-8 yrs old)

Description : Bitewing x rays are taken to assist in the detection of caries :** A. Occlusally B. Lingually C. Buccally D. Gingivally E. Interproximally

Last Answer : E. Interproximally

Description : Proximal caries on x-rays appears: A. Smaller than clinically seen B. Larger than clinically seen C. The same

Last Answer : A. Smaller than clinically seen

Description : A blow to the mandible resulted in deviation to the left on opening; x-rays show unilateral fracture, where would you expect the fracture:** A. Neck of the left condyle B. Neck of the right condyle C. Body of the left condyle D. Body or the right condyley

Last Answer : A. Neck of the left condyle

Description : In X rays filtration is used to:** A. Remove low energy X rays B. Reduce exposure time C. Reduce size of the beam

Last Answer : A. Remove low energy X rays

Description : Caries which is close to the pulp chamber; on x rays you find ‘dens in dente’; the right treatment is: A. Zinc oxide eugenol cement and amalgam B. Pulpectomy C. Pulpotomy D. Calcium hydroxide on pulp and amalgam

Last Answer : B. Pulpectomy

Description : Photographic plates are coated with (A) Silver nitrate (B) Silver halide (C) Calcium silicate (D) Metallic silver

Last Answer : (B) Silver halide

Description : Photographic plates are coated with (A) Silver nitrate (B) Silver halide (C) Calcium silicate (D) Metallic silver

Last Answer : (B) Silver halide

Description : The MOST likely factor contributing to tooth eruption is:** A. The growing root B. Bone growth C. Vascular pressure D. The developing periodontal ligament

Last Answer : A. The growing root

Description : A primary molar has relatively un-resorbed roots encompassing the permanent tooth bud. What  extraction technique would you use to avoid the inadvertent removal of a developing bicuspid 

Last Answer : Section the tooth vertically and remove each root separately 

Description : .In developing plaque; the adhesive polymer produced by streptococcus mutans is synthesis from: A. Glucose B. Fructose C. Sucrose D. Lactose E. Amylose

Last Answer : C. Sucrose

Description : X-ray films have an emulsion on one or both sides of a support material. The emulsion contains particles of, A. Silver nitrate crystal B. Metallic silver in gelatine C. Silver bromide in gelatine D. Silver nitrate in gelatine E. Potassium bromide in gelatine

Last Answer : C. Silver bromide in gelatine

Description : Silver is refined by cupellation process, the process removes the impurity of:

Last Answer : Silver is refined by cupellation process, the process removes the impurity of: A. Cu B. Au C. Pb D. Pt

Description : On X-ray, the buccal roots of 16 is considerably elongated; this is a result of, A. Too great vertical angulation B. Inadequate vertical angulation C. Excessive object film distance

Last Answer : B. Inadequate vertical angulation

Description : A 8 years-old patient has 3 first premolars erupted and a swelling on the ridge of the un-erupted premolar. X ray shows a fully developed crown and ¾ roots development with no ... recision to allow eruption C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

Last Answer : C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

Description : What is correct in regard to high copper amalgam, A. Reacts and strengthens the amalgam by its dispersion properties B. Reacts to form copper-tin phase thereby eliminating the tin-mercury ... thereby eliminating the silver mercury phase D. Reacts and strengthens the amalgam by its grain diffusion

Last Answer : B. Reacts to form copper-tin phase thereby eliminating the tin-mercury phase

Description : Choose a statement that correctly defines the term AMALGAM: A. Amalgam is a metallic powder composed of silver, tin, copper and zinc B. Amalgam is an alloy of two or more metals that have been dissolved in ... is mixed with mercury E. Amalgam is an alloy of two or more metals, one of them is tin

Last Answer : C. Amalgam is an alloy of two or more metals, one of them is mercury

Description : Which of the following will not displace the halogen from the solution of the halide?

Last Answer : Which of the following will not displace the halogen from the solution of the halide? A. `Br_2` added to ... F_2` added to KCl D. `Cl_2` added to NaF

Description : Leakage in a cooking gas cylinder is detected by (A) Radio-isotopes (B) Pouring soap solution on the surface and locating the gas bubbles (C) Halide torch (D) Pungent smell of mercaptans present in the gas

Last Answer : Option D

Description : If the focal spot to film distance is increased from 20cm to 40cm, the intensity of radiation is reduced by: a. ½ b. ¼ . c. 1/3 d. 1/5

Last Answer : b. ¼ .

Description : What is the most important factor to reduces dental irradiation, A. Speed of film B. Collimation C. Filtration D. Cone shape and length

Last Answer : A. Speed of film