A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is

(A) 1.125 cm (B) 1.5 cm (C ) 2 cm (D) 8 cm

1 Answer

Answer :

A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is 2 cm 

Related questions

Description : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is (A) 28.2 mm (B) 26.4 mm (C) 24.4 mm (D) 22.0 mm

Last Answer : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is 22.0 mm

Description : The velocity of travelling wave through a cable of relative permittivity 36 is

Last Answer : The velocity of travelling wave through a cable of relative permittivity 36 is 0.5 x 108 m/sec

Description : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he

Last Answer : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he 0.52

Description : What was the positive in putting lead in gasoline?

Last Answer : Improved gas mileage and performance because Lead stopped “knock” in gas engines.

Description : Does this mean there's lead in it?

Last Answer : Use it for a violet. Don’t take a chance.

Description : Should I have the peeling paint in my kitchen cabinets (in my 1920's vintage apt. building) checked for lead?

Last Answer : I would think so, I’m more concerned with how jealous I am of your building.

Description : Lead Extrusions

Last Answer : Lead is one of the most commonly used metals for extrusions. It is a bluish-white metal that is lustrous, ductile, very soft, highly malleable, and a relatively poor conductor of ... system disruption, brain damage, declined sperm counts in men, and diminished learning abilities in children.

Description : Lead Acid battery

Last Answer : If you are a car owner, no doubt you have heard of the term lead-acid battery many times. Well, most car, truck, motorcycle and marine batteries are lead-acid batteries. Lead-acid ... for many of their power supply needs. Lead pollution can be lessened by proper disposal of these batteries.

Description : How to Lead a Team

Last Answer : How to Lead a Team History is peppered with great leaders - kings, dictators, religious icons, military men, and other colorful individuals - who at one time or another influenced our way of life. ... . With the proper attitude and mindset, you should be able to lead your team to greater heights.

Description : Steps to carry out the maintenance of lead acid batteries

Last Answer : Steps to carry out the maintenance of lead acid batteries: 1) Keep the container surface dry by using dry cloths. 2) Tighten the terminal connections. 3) Battery should not be discharged ... 9) During initial charging use fresh electrolyte. 10) Avoid overcharging and short circuit of plates.

Description : Explain the maintenance of lead acid battery.

Last Answer : Maintenance of lead acid battery: 1) Keep the container surface dry by using dry cloths. 2) Tighten the terminal connections. 3) Battery should not be discharged below a minimum voltage. 4) Never keep battery ... -container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : In lead acid battery the density of acid indicates the  (1) charge of the battery (2) level of acid (3) e.m.f of the battery (4) damage of the plates

Last Answer : In lead acid battery the density of acid indicates the charge of the battery

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Last Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

Description : State any four characteristics of core type transformer.

Last Answer : Characteristics of core type transformer: i) It has one window. ii) It has one magnetic circuit. iii) Core surrounds the winding. iv) Average length of core is more. v) Area of cross ... Better cooling for winding. vii) Mechnical strength is comparatively less. viii) Repair and maintenance is easy.

Description : A 40 kVA transformer has a core loss of 400 W and a full load copper loss of 800 W. The proportion of full load at maximum efficiency is

Last Answer : A 40 kVA transformer has a core loss of 400 W and a full load copper loss of 800 W. The proportion of full load at maximum efficiency is 0.707

Description : The core construction is like spokes of a wheel in following transformer:  (A) Berry Type Transformer (B) Core Type Transformer (C) Shell Type Transformer (D) None of the above

Last Answer : The core construction is like spokes of a wheel in following transformer:  Berry Type Transformer

Description : Core type transformers are popular in___________.  (A) High voltage applications (B) Low voltage applications (C) All of the above (D) None of the above

Last Answer : Core type transformers are popular in High voltage applications

Description : The desirable properties of transformer core material are  (1) low permeability and low hysteresis loss. (2) high permeability and high hysteresis loss. (3) high permeability and low hysteresis loss. (4) low permeability and hysteresis loss.

Last Answer : The desirable properties of transformer core material are high permeability and low hysteresis loss.

Description : The main purpose of using core in a transformer is to (A) decrease iron losses (B) eliminate magnetic hysteresis (C) reduce reluctance of the common magnetic circuit (D) prevent eddy current loss

Last Answer : Reduce Relucatnce of the common magnetic circuit.

Description : A ferrite core has less eddy current loss than an iron core because?

Last Answer : A ferrite core has less eddy current loss than an iron core because ferrites have high hysteresis.

Last Answer : The armature core of a D.C. generator is usually made of silicon steel.

Last Answer : When a conductor carries more current on the surface as compared to core, it is due to skin effect.

Last Answer : Material used for construction of transformer core is usually silicon steel.

Description : When secondary of a current transformer is open-circuited its iron core will be?

Last Answer : When secondary of a current transformer is open-circuited its iron core will be hot because of heavy iron losses taking place in it due to high flux density.

Description : The size of a transformer core will depend on?

Last Answer : The size of a transformer core will depend on frequency and area of the core.

Description : Reduction in core losses and increase in permeability are obtained with transformer employing?

Last Answer : Reduction in core losses and increase in permeability are obtained with transformer employing core built-up of laminations of cold rolled grain oriented steel.

Description : Why does the core of a transformer need to be laminated?

Last Answer : Transformer cores are laminated to reduce eddy current loss.

Description : In DC generators lamination core are generally made of?

Last Answer : In DC generators lamination core are generally made of silicon steel.

Last Answer : Transformer core is laminated to reduce Eddy current losses.

Description : State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) ... is to be laid in the same trench, what should be minimum spacing between two cables ?  

Last Answer : (i) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr. (ii) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr ... should be minimum spacing between two cables :- Then minimum 30 cm spacing is provided between 2 cables 

Description : I have 10 minutes to decide whether to cancel my cable help me choose?

Last Answer : Do it. Piracy is free. Just avoid the torrents.

Description : How do I set up a Universal Remote Control to my Suddenlink cable box?

Last Answer : answer:

Description : Does anyone have the USB GO! Link Cable?

Last Answer : You can usually get drivers and related software from the manufactures web page.

Description : Where can I get an HSSDC to USB cable or similar.

Last Answer : I would call tyco electronics or amphenol customer service and see if they have any standard cable assemblies. They might have some in their sample stock. It's possible that this isn't a standard and the wiring ... match up though. I work for TE and I've never heard of a HSSDC to USB cable assembly.

Description : Why is the death penalty a non-view event when it could be assessible to all by cable?

Last Answer : I agree that it shouldn't be shied away from- especially if one supports it. However, showing it on television would violate a few laws. So to get around those it would have to be either a pay ... I just don't see how it will happen with the way our communication and broadcasting system is set up.

Description : Where can I find a CNT or LMR 400 cable?

Last Answer : Check your local Radio Shack store or Order Online -> http://www.google.com/products?hl=en&source=hp&q=CNT%20or%20LMR%20400%20cable&rlz=1R2ADSA_enUS360&oq=&um=1&ie=UTF-8&sa=N&tab=wf

Description : How can I use a multimeter to find out how many OHMS are in a cable?

Last Answer : Measure the potential difference (V) across the cable and the current (I) running through it. Then use Ohm’s law: V = IR. R is the resistance, given in ohms, where 1 ohm is 1 volt divided by 1 amp.

Description : I can't find this cable anywhere!

Last Answer : Ahem

Description : Why do we now have commericals on cable television?

Last Answer : Not the defend the cable companies, but their operating and infrastructure costs are constantly going up. The money’s got to come from somewhere.

Description : Can I cut a cable wire?

Last Answer : probably best just to feed it into the hole, if possible. you may want it later. but, if you're sure you won't, then,yes, you can.

Description : State the procedure for laying / installation of underground cable.  

Last Answer : 1) Direct laying Cable: or Trench laying method: Procedure: * For laying of a cable trench about 1.5m deep and 0.5m wide is made along the cable route. * A ... over. * Cables laid in this manner are usually plain lead covered because troughing affords good mechanical protection. 

Description : desirable properties of Cable

Last Answer : Following are the main properties of cables:  1. Stranded Conductor: The conductor used for cable should be stranded specially for large size of cable because,  To increase the flexibility ... and mechanical injury.  7. Life: The material used for cable should have long life. 

Description : Why is "RJ-45" cable called "RJ-45" ?

Last Answer : rj = registered jack 45 = is number of standard interface and contains 8 separate wires

Description : Why cable outer sheath is black in color?

Last Answer : There are cables with different colors, for example, red, orange, grey. PVC or HDPE, the plastics that the jacket of the cable is made of, have to be UV-stabilized. Carbon black is a common and cheapest additive for it purpose

Description : How rating of main switch and cable is selected for Industrial Installation.

Last Answer : 1. Rating of Main Switch or Fuse Rating is decided in industrial installation: Rating of main switch or fuse is based up the starting current of motor. For calculating starting current is considered 2 ... take 1.5 times the rated current or full load current. & thus cable rating is decided.

Description : State functions of ; i) Cable box ii) Guard wire iii) Shackle insulator iv) Stay wire used in service connection

Last Answer : i) Function of Cable box: To hold and inspect incoming and outgoing terminals  ii) Function of Guard wire : A grounded conductor placed beneath an overhead transmission line in order to ground ... in service connection: To give mechanical Support to pole, line and prevent leakage current if any

Description : If the insulation resistance of a cable of length 10 km is 1 mega ohm, its insulation resistance for 50 km length will be

Last Answer : If the insulation resistance of a cable of length 10 km is 1 mega ohm, its insulation resistance for 50 km length will be 0.2 mega ohm

Description : what is the use of bedding on underground cable?

Last Answer : Bedding is the layer above the lead sheath it protects the lead sheath from corrosion that means it gives chemical protection to metallic sheath(lead sheath)

Description : Which casket is the picture in?

Last Answer : It’s in the silver casket.

Description : How safe is titanium to handle?

Last Answer : Basically safe, but the powder can go BOOM! 1 There’s some interest in the bioaccumulation over time too and what effects it might be having. 2