What should I get for my first welder, arc or stick?

What should I get for my first welder, arc or stick?
by

1 Answer

Answer :

‘pends, I think you should get the arc.
by

Related questions

Compare the AC and DC Arc lamps.

Description : Compare the AC and DC Arc lamps.

Last Answer : AC Arc Lamp DC Arc Lamp Cross section area of electrode is same Cross section area of electrode is positive rod is twice that of negative rod Series inductor is used for stability ... supply is used for DC arc lamp Luminous efficiency is less Luminous efficiency is high

Compare between Resistance welding and Arc welding on any six points.

Description : Compare between Resistance welding and Arc welding on any six points.

Last Answer : Sr.No Parameters Resistance Welding Arc Welding 1 Type of welding Plastic/Pressure/Non-fusion welding Fusion/Non pressure welding 2 Principle of heat developed Heat ... It is suitable for mass production It is suitable for heavy job, maintenance and repair work

Write the purpose of coal and ash handling unit. Also write different activities that arc carried out in this unit.

Description : Write the purpose of coal and ash handling unit. Also write different activities that arc carried out in this unit.

Last Answer : Purpose of coal and ash handling unit :-  To transport coal from coal storage to power plant. A large quantity of ash about 10 to 30 % produced in furnace, the removal of ash from boiler furnace ... disposed off.  Various methods of disposal of ash:  Mechanical system.  Pneumatic system.

The arc temperature in Oil Circuit Breaker may reach up to_______.

Description : The arc temperature in Oil Circuit Breaker may reach up to_______.  (A) 5,000° K (B) 8,000° K (C) 10,000° K (D) None of the above

Last Answer : The arc temperature in Oil Circuit Breaker may reach up to 5,000° K 

Arc resistance

Description : Arc resistance  (1) increases with increase in arc current (2) decrease with increase in arc current (3) is independent of arc current (4) is independent of arc length

Last Answer : Arc resistance decrease with increase in arc current 

For arc welding current range is usually

Description : For arc welding current range is usually  (1) 10 to 15 A (2) 30 to 40 A (3) 50 to 100 A (4) 100 to 350 A

Last Answer : For arc welding current range is usually 100 to 350 A

Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :

Description : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  (C) Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

Last Answer : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  ... Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

The arc voltage in a circuit breaker is :

Description : The arc voltage in a circuit breaker is :

Last Answer : The arc voltage in a circuit breaker is : in phase with the arc current

The supply for arc welding is :

Description : The supply for arc welding is : 

Last Answer : The supply for arc welding is : Low voltage, high current ac or dc voltage

Which of the following is used in a circuit breaker as the medium in which the arc forms?

Description : Which of the following is used in a circuit breaker as the medium in which the arc forms? A) Insulating gas B) Insulating oil C) Vacuum D) All the above

Last Answer : Which of the following is used in a circuit breaker as the medium in which the arc forms? A) Insulating gas B) Insulating oil C) Vacuum D) All the above

Arc in a circuit breaker is interrupted at?

Last Answer : Arc in a circuit breaker is interrupted at zero current.

The arc voltage produced in A.C. circuit breaker is always?

Last Answer : The arc voltage produced in A.C. circuit breaker is always in phase with the arc current.

Arc in a circuit behaves as?

Description : Arc in a circuit behaves as?

Last Answer : Arc in a circuit behaves as a resistance decreasing with voltage rise across the arc.

Can I use a 115v 26 amp welder on a regular outlet?

Description : Can I use a 115v 26 amp welder on a regular outlet?

Last Answer : answer:As long as the wiring and the breakers are at least 30 amp you should be okay. Don't try to use it in a 20 amp circuit. If in doubt have someone come in and test the circuits, or ... . A little effort and money spent up front may save you from burning down your garage and possibly your house.

What are the pros and cons of becoming a welder?

Description : What are the pros and cons of becoming a welder?

Last Answer : answer:It's a good craft and well paid when there is work. If you're into the building trades, it is a good choice. On the other hand, you don't do much more than weld all the time. And if ... working construction you might be in a ditch or outdoors in bad weather. But that's true of a lot of jobs.

Any tips for a novice welder?

Description : Any tips for a novice welder?

Last Answer : answer:My tip is this. Have a potato with you at all times. My father was a mechanical engineer that owned a welding and machine shop. After school we went to the shop. When I wasn't sweeping I was bolting ... eyes. It still hurt but it was a lot better. And practice.. Being a good welder is a art.

How to land top welder jobs?

Description : How to land top welder jobs?

Last Answer : Welding is an industry where lots of really good jobs exist. If you want to be competitive for welder jobs, then you have to do the right things to position yourself. These jobs pay very ... jobs. These places have dedicated programs that do nothing but provide prospective welders with a skill set.

How many pipe welder jobs are currently open?

Description : How many pipe welder jobs are currently open?

Last Answer : That depends, are you wondering about pipe welder jobs at acertain company, in a certain city, a certain state, or all thejobs in the country? If you want to know about a certain company,contact the ... out. If it is one of the other choices,narrow down the demographic on monster to get an idea.

welding i want to weld steel bars to my trailer should i use a arch welder or a wire feed welder?

Description : welding i want to weld steel bars to my trailer should i use a arch welder or a wire feed welder?

Last Answer : arch welding is a more stable form of welding. it get hotter and creates a stronger bond

What is the salary for an underwater welder?

Description : What is the salary for an underwater welder?

Last Answer : While underwater welding is a dangerous career, it can be very lucrative and pay upwards of 100,000 dollars per year with a median salary around 90,000 dollars annually

what is the salary of an underwater welder?

Description : what is the salary of an underwater welder?

Last Answer : An underwater welder starts off in the mid 40s. You should research this on any website and scan salary given in ads. You may want to call a center by using 411. This could direct you to an actual center.

What kind of experience do I need to be a welder?

Description : What kind of experience do I need to be a welder?

Last Answer : According to my research in order to become a Welder you will need to take a test to receive your Welder's certificate. Once you get the certificate you can apply for jobs.

How do I learn to be a professional welder?

Description : How do I learn to be a professional welder?

Last Answer : Most community colleges offer welding as a degree. You will have a teacher who knows everything about welding and has the experience to back them up.

does a welder have to do any type of schooling/classes?

Description : does a welder have to do any type of schooling/classes?

Last Answer : There are multiple technical trade schools that provide welding classes and certification programs. One example is http://www.witcc.edu

In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends? a) They are easier to produce b) The testing equipment cannot handle thick root/face bends c) Root defects are not important for welder qualification d) They give more accurate indications

Description : In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends? a) They are easier to produce b) The testing equipment cannot handle thick root/face bends c) Root defects are not important for welder qualification d) They give more accurate indications

Last Answer : d) They give more accurate indications

Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder as he knows which welds are likely to produce the least defects c) This will be referenced in the inspection and test plan d) Nobody, as welding is always carried out to a high standard the use of percentage NDT is of no real value

Description : Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder ... welding is always carried out to a high standard the use of percentage NDT is of no real value

Last Answer : c) This will be referenced in the inspection and test plan

Who has the final responsibility of sentencing and accepting a weld on completion? a) The contractor’s inspector b) Site manager c) The welder d) The client’s inspector or certifying authority

Description : Who has the final responsibility of sentencing and accepting a weld on completion? a) The contractor’s inspector b) Site manager c) The welder d) The client’s inspector or certifying authority

Last Answer : d) The client’s inspector or certifying authority

What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant information c) None if the tensile strength of the consumables is the same as the approved one d) Change the electrode for the correct type and continue welding

Description : What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant ... the same as the approved one d) Change the electrode for the correct type and continue welding

Last Answer : b) Report the incident and record all relevant information

Who has the responsibility of ensuring the welder is using the correct polarity during welding? a) The welder and the welding inspector b) Store man and the welder c) Welding Engineer d) The Q/A department

Description : Who has the responsibility of ensuring the welder is using the correct polarity during welding? a) The welder and the welding inspector b) Store man and the welder c) Welding Engineer d) The Q/A department

Last Answer : a) The welder and the welding inspector

t is permissible to allow trainee welder to carry out production welding? a) Never b) Yes as long as the supervisor is happy with his workmanship standard c) Yes as long as he has the approved qualification to cover the intended scope of work d) Yes as long as no NDT is required on the finished weld

Description : t is permissible to allow trainee welder to carry out production welding? a) Never b) Yes as long as the supervisor is happy with his workmanship standard c) Yes as long as he has the approved ... cover the intended scope of work d) Yes as long as no NDT is required on the finished weld

Last Answer : a) Never

Which of the following would not be required to be checked before welding? a) The welding consumables b) The welder qualification c) Calibration of the welding equipment d) The workshop humidity

Description : Which of the following would not be required to be checked before welding? a) The welding consumables b) The welder qualification c) Calibration of the welding equipment d) The workshop humidity

Last Answer : d) The workshop humidity

Who determines what the correct weld preparation (root gap, root face, included angle) should be? a) The welding engineer b) The welding supervisor c) The welder will decide d) The inspector will recommend what is suitable

Description : Who determines what the correct weld preparation (root gap, root face, included angle) should be? a) The welding engineer b) The welding supervisor c) The welder will decide d) The inspector will recommend what is suitable

Last Answer : a) The welding engineer

New AT weld should be entered in TMS by ? (i) Sectional JE/SSE* (ii) Incharge SSE (iii) Welder (iv) None of the above

Description : New AT weld should be entered in TMS by ? (i) Sectional JE/SSE* (ii) Incharge SSE (iii) Welder (iv) None of the above

Last Answer : (i) Sectional JE/SSE*