Which of the following is the name given to resistance of thin films that are uniform in thickness?

A) Area resistance B) Sheet resistance

C) Filmy resistance D) None of these

1 Answer

Answer :

Which of the following is the name given to resistance of thin films that are uniform in thickness?

A) Area resistance B) Sheet resistance

C) Filmy resistance D) None of these

Related questions

Description : The thickness of insulation provided on the conductor depends on?

Last Answer : The thickness of insulation provided on the conductor depends on the magnitude of voltage on the conductor.

Description : How to Look Good in a School Uniform

Last Answer : How to Look Good in a School Uniform Your school uniform shouldn't stop you from embracing individuality. Express yourself by personalizing your uniform. Here are some tips you can follow to look good and still ... accessory. You don't have to live in a cookie-cutter world. Stand out and be noticed!

Description : a particle moves with uniform velocity. Which o fthe following statements about the motion of the particle is true. (a) its speed is zero. (b) its acceleration is zero. © its acceleration is opposite to the velocity. (d) its speed may be variable

Last Answer : Its acceleration is zero

Description : A particle moving with uniform speed can possess :  (a) radial acceleration (b) tangential acceleration © both radial and tangential accelerations (d) neither radial nor tangential acceleration

Last Answer : Neither radial nor tangential... as if it move in a straight line.. but it possess radial acceleration if it moves in a uniform circular path

Description : The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the _______ of conductor.  (1) Surface (2) Center (3) Complete cross section area (4) Axis

Last Answer : The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the Surface of conductor. 

Description : The center of gravity of a uniform lamina lies at?

Last Answer : The center of gravity of a uniform lamina lies at the mid point of its axis.

Description : What is the resistance of a 160 m wire with a uniform diameter of 0.28 mm, if the specific resistance is 12.32 μΩ-cm? A) 3.2 Ω B) 3.2 μΩ C) 0.8 Ω D) None of these

Last Answer : What is the resistance of a 160 m wire with a uniform diameter of 0.28 mm, if the specific resistance is 12.32 μΩ-cm? A) 3.2 Ω B) 3.2 μΩ C) 0.8 Ω D) None of these

Description : What affect does the thickness of a wire have on its resistance?

Last Answer : Ans: The resistance of a wire decreases as its thickness increases.

Description : State the procedure for testing of earth pit resistance with necessary diagrams.

Last Answer : Following procedure (Method) for testing of earth pit resistance with necessary diagrams. 1) Earth Tester : i) Three point method ii) Four point method 2) By Potential drop method 3 ... of that earthing pit. In this test the accuracy is less but electrical rods are not required. 

Description : what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel

Last Answer : equivalent resistance

Description : Define resistance with its unit.

Last Answer : Resistance is a measure of the degree to which a substance impedes the flow of electric current induced by a voltage.  Or Resistance is the opposition to current flow in an electrical circuit. Unit is ohm.(Ω)

Description : How does the resistance of a conductor compare to that of an insulator?

Last Answer : The resistance of a conductor can be significantly lower than the resistance of an insulator, depending on each material's atomic properties.

Description : Parallel Reactance and Resistance Example 1

Last Answer : Parallel Reactance and Resistance Example 1

Description : AC Circuits with Resistance but No Reactance

Last Answer : AC Circuits with Resistance but No Reactance AC Circuits with Resistance but No Reactance Series resistances let two resistances R 1 and R 2 are connected in series as shows in figure and there ... voltage. Voltage V A is common to both the branch hence voltage V A is common reference.

Description : Problems on resistance and resistivity

Last Answer : Problem on resistance and resistivity 1 : https://youtu.be/OqavD7OlZUs Problem on resistance and resistivity 2 : https://youtu.be/0eo8VO8cpwk Problem on resistance and resistivity 3 : https:// ... https://youtu.be/3neLRCTz0RQ Problem on resistance and resistivity 13 : https://youtu.be/vBCkvPOiztY

Description : Problem on temperature coefficient of resistance 3

Last Answer : Problem on temperature coefficient of resistance 3

Description : Problem on temperature coefficient of resistance 2

Last Answer : Problem on temperature coefficient of resistance 2

Description : Problem on temperature coefficient of resistance 1

Last Answer : Problem on temperature coefficient of resistance 1

Description : Problem on resistance and resistivity 13

Last Answer : Problem on resistance and resistivity 13

Description : Problem on resistance and resistivity 12

Last Answer : Problem on resistance and resistivity 12

Description : Problem on resistance and resistivity 11

Last Answer : Problem on resistance and resistivity 11

Description : Problem on resistance and resistivity 10

Last Answer : Problem on resistance and resistivity 10

Description : Problem on resistance and resistivity 9

Last Answer : Problem on resistance and resistivity 9

Description : Problem on resistance and resistivity 8

Last Answer : Problem on resistance and resistivity 8

Description : Problem on resistance and resistivity 7

Last Answer : Problem on resistance and resistivity 7

Description : Problem on resistance and resistivity 6

Last Answer : Problem on resistance and resistivity 6

Description : Problem on resistance and resistivity 5

Last Answer : Problem on resistance and resistivity 5

Description : Problem on resistance and resistivity 4

Last Answer : Problem on resistance and resistivity 4

Description : Problem on resistance and resistivity 3

Last Answer : Problem on resistance and resistivity 3

Description : Problem on resistance and resistivity 2

Last Answer : Problem on resistance and resistivity 2

Description : Problem on resistance and resistivity 1

Last Answer : Problem on resistance and resistivity 1

Description : Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Last Answer : Methods for measurement of low resistance:  1. Ammeter voltmeter method  2. Kelvin's bridge method  3. Ohm meter method  4. Potentiometer method  5. Digital/analog multi-meter ... must be infinity for perfectly accurate measurement which is not possible.  2. Connection errors.

Description : Name the method used to measure following resistances:- (i) Low resistance (ii) Medium resistance (iii) Insulation resistance (iv) Earth resistance.

Last Answer : Following are the methods used to measure resistances:-  (i) Low resistance: 1.Voltmeter-Ammeter Method 2. Kelvin's Double bridge Method  (ii) Medium resistance: 1.Voltmeter-Ammeter Method 2. ... of Charge Method  (iv) Earth resistance : 1. Fall of Potential Method 2. Earth tester

Description : Write any two factors on which earth resistance depends.

Last Answer : Factors on which earth resistance depends: (1) The shape and material used for the electrode (2) Depth of the electrode in the ground. (3) The specific resistance of the soil around the electrode (4) Moisture content in the soil. (5) Nature of soil 

Description : State the use of shunt and series resistance used in extension of meter.

Last Answer : Use of shunt and series resistance: i) Use of shunt: To extend the range of Ammeter. ii) Use of series resistance: To extend the range of Voltmeter.

Description : State the range for low and medium resistance.

Last Answer : Low resistances: less than 1 ohm.  Medium resistances: 1 ohm to 0.1 Mega ohm. 

Description : Explain V- I method of measurement of medium resistance. 

Last Answer : In this method, use suitable source, ammeter and voltmeter and connect them as shown in the above diagram. Take reading of voltmeter and ammeter, then value of resistance = R = V/I Ω To minimise the error take 4 to 5 observation for the same resistance and take their average.

Description : Give classification of resistance based on their ranges.

Last Answer : Classification of Resistances Based on Their Ranges: 1) Low resistance: less than 1 ohm. 2) Medium resistance: 1 ohm to 0.1 Mega ohms. 3) High resistance: greater than 0.1 Mega ohms.

Description : Define pinch off voltage and drain resistance of FET.

Last Answer : 1 . Pinch-off Voltage: It is the value of the drain to source voltage VDS at which the drain current ID reaches its constant saturation value. Any further increase in VDS does not have any ... drain to source voltage to the change in drain current. It is also called AC/dynamic drain resistance.

Description : Define the following terms as referred to battery. a) E.M.F b) Internal resistance c) Ah efficiency d) WAh efficiency

Last Answer : a) E.M.F : The electromotive force of a battery is defined as the energy spent or the work done in taking a unit positive charge around the complete circuit of the battery i.e., in ... input required to restore the initial state of charge, under specified conditions, is called Watt-hr efficiency.

Description :  A resistor in which the resistance changes exponentially with change in temperature is called as A) Potentiometer B) Phototransistor C) Varactor D) Thermistor 

Last Answer :  A resistor in which the resistance changes exponentially with change in temperature is called as Thermistor 

Description : We connected a 35V dc supply to a resistance of 600 Ohm in series with an unknown resistance R.A. voltmeter having a resistance of 1.2 kOhm is connected across 600 Ohm resistance and read 5v. The value of resistance R will be

Last Answer : We connected a 35V dc supply to a resistance of 600 Ohm in series with an unknown resistance R.A. voltmeter having a resistance of 1.2 kOhm is connected across 600 Ohm resistance and read 5v. The value of resistance R will be 2.4 kOhm

Description : What is the resistance of a coil which draws 10 A and dissipates 1520 W? A) 152 Ω B) 15.2 Ω C) 1.52 Ω D) None of these

Last Answer : What is the resistance of a coil which draws 10 A and dissipates 1520 W? A) 152 Ω B) 15.2 Ω C) 1.52 Ω D) None of these

Description : What happens to the resistance of a wire when its length as well as the cross-sectional area are doubled? A) It doubles B) It becomes 4 times C) It becomes 2π times D) It remains the same

Last Answer : Automatically the resistivity will increase as they are the factors affecting the resistivity 

Description : Consider a cube of material of sides 1 cm with a resistance of 0.003 Ω between its opposite faces. What is the resistance if the same volume of the material is drawn into a length of 50 cm with a uniform cross – section? A) 0.003 Ω B) 0.15 Ω C) 7.5 Ω D) None of these

Last Answer : Consider a cube of material of sides 1 cm with a resistance of 0.003 Ω between its opposite faces. What is the resistance if the same volume of the material is drawn into a length of 50 cm with a uniform cross – section? A) 0.003 Ω B) 0.15 Ω C) 7.5 Ω D) None of these

Description : What is the total resistance if 5 resistors of 20 Ω each are connected in series? A) 100 Ω B) 4 Ω C) 20 Ω D) None of these

Last Answer : What is the total resistance if 5 resistors of 20 Ω each are connected in series? A) 100 Ω B) 4 Ω C) 20 Ω D) None of these

Description : When both the inductance and resistance of a coil are doubled the value of?

Last Answer : When both the inductance and resistance of a coil are doubled the value of time constant remains unchanged.

Description : When an alternating current passes through an ohmic resistance the electrical power converted into heat is?

Last Answer : When an alternating current passes through an ohmic resistance the electrical power converted into heat is true power.

Description : An A.C. voltage is impressed across a pure resistance of 3.5 ohms in parallel with a pure inductance of impedance of 3.5 ohms?

Last Answer : An A.C. voltage is impressed across a pure resistance of 3.5 ohms in parallel with a pure inductance of impedance of 3.5 ohms, both resistance and inductance carry equal currents.

Description : The effective resistance of an iron-cored choke working on ordinary supply frequency is more than its true resistance because of?

Last Answer : The effective resistance of an iron-cored choke working on ordinary supply frequency is more than its true resistance because of iron loss in core.