The transfer of energy for reaction turbines is based on _______

A) Newton’s first law B) Newton’s second law

C) Newton’s third law D) All the above

1 Answer

Answer :

The transfer of energy for reaction turbines is based on Newton’s third law

Related questions

Description : Name the turbines used in HPS. For the heads 30 M and less and 200 M and above.

Last Answer : For the heads 30 M and less :  1. Multi jet pelton wheel 2. Cross flow turbine 3. Turgo turbine 4. Francis turbine 5. Overshot Water Wheel 6. Pitch back Water Wheel  For the heads 200 M and above:-  1. Francis turbine 2. Pelton wheel turbine

Description : State the types of wind turbines. 

Last Answer : The types of Wind Turbines:-  1) Vertical axis wind turbine (VAWT)   2) Horizontal axis wind turbine (HAWT)   i) Up wind HAWT   ii) Down Wind HAWT  OR  The types of wind turbines:-  1. Small size wind turbine  2. Medium size wind turbine  3. Large size wind turbine 

Description : _______ electric power is the most common method used by electrical grids to transfer power.  (A) One-phase (B) Two-phase (C) Three-phase (D) None of the above

Last Answer : Three-phase electric power is the most common method used by electrical grids to transfer power. 

Description : Explain the nuclear chain reaction in a nuclear power plant.

Last Answer : Nuclear chain reaction in a nuclear power plant: If a slow moving neutron hits unstable heavy nucleus of nuclear fuel U235 or Pu239 , the neutron is absorbed, the nucleus splits into two more ... chain reaction can be controlled and desired heat energy can be obtained in nuclear power plant. 

Description : In a 3 -phase alternator, if there is only magnetizing armature reaction, the load is :  (A) capacitive (B) inductive (C) resistive (D) inductive and resistive

Last Answer : In a 3 -phase alternator, if there is only magnetizing armature reaction, the load is : capacitive 

Description : What is the effect of armature reaction? A) Demagnetization of the main field B) Demagnetization of the brushes C) Cross-magnetization of the brushes D) None of these

Last Answer : What is the effect of armature reaction? A) Demagnetization of the main field B) Demagnetization of the brushes C) Cross-magnetization of the brushes D) None of these

Description : Define armature reaction in an alternator. Explain the effect of armature reaction at various P.F. of loads of alternator.

Last Answer : Armature Reaction: The effect of armature flux on main flux is called as armature reaction.  Armature Reaction at Various Power Factors: When armature is loaded, the armature flux modifies ... lagging p.f. For capacitive loads the effect of flux is partly distorting and partly strengthening.

Description : The armature reaction in a synchronous generator supplying leading power factor load is (A) magnetizing (B) demagnetizing (C) demagnetizing and cross-magnetizing (D) magnetizing and cross-magnetizing

Last Answer : The armature reaction in a synchronous generator supplying leading power factor load is magnetizing and cross-magnetizing

Description : The ratio of limiting friction and normal reaction is known as?

Last Answer : The ratio of limiting friction and normal reaction is known as coefficient of friction.

Last Answer : Armature reaction in a generator results in demagnetisation of leading pole tip and magnetisation of trailing pole tip.

Last Answer : The demagnetising component of armature reaction in a D.C. generator reduces generator e.m.f.

Last Answer : Armature reaction of an unsaturated D.C. machine is crossmagnetising.

Description : Maximum Power Transfer Theorem 1

Last Answer : Maximum Power Transfer Theorem 1

Description : State maximum power transfer theorem for DC circuit.

Last Answer : Maximum power transfer theorem for DC circuit: The maximum power transfer theorem states that the source or a network transfers maximum power to load only when the load resistance is equal ... removed (disconnected) ii) All internal independent sources are replaced by their internal resistances.

Description : What is the first thing that goes through your mind when you see a blank post?

Last Answer : The person probably thought it would stir up unnecessary conflict on the Q, or was insensitive, and thought better of it shortly after posting. That’s why I usually delete.

Description : In life, what would make you "weak in the knees"?

Last Answer : Oh, I interpret weak in the knees very differently from the examples you gave. Something that gets you excited is the way I take it as in the song lyrics she loved me so naughty made me weak in the ... 's leaving me made me almost weak in the knees but I've have continued being able to walk .

Description : Mention The Steps In The Interrupt Driven Mode Of Data Transfer.?

Last Answer : Answer :The steps followed in this type of transfer are as follows: The peripheral device would request for an interrupt. The request acknowledgement for the transfer is issued at the end of ... coordinates by the ISS. Again the Interrupt system is enabled and the above steps are repeated.

Description : How to Write a Job Transfer Request ?

Last Answer : How to Write a Job Transfer Request No matter which type of industry you are in, there may come a point in your career when you would not want to settle for the current position that you have at ... push that your boss needs to finally take notice of the work that you have been doing in the past.

Description : Heat Transfer Software

Last Answer : The process of heat transfer is used in many industries - the scientific industry, engineering industry and every industry you can possibly think of that uses thermal heat. Because of this, there is a need ... group, so you won't have to go through the hassle of copying information down for others.

Description : Heat Transfer Machines

Last Answer : Heat transfer machines are just the thing you need in order to do heat transfers on your clothing or whatever surface you want to decorate. In order for you to stick designs and precious stones on porous and ... is best. This will also give you an idea of what kind of designs you can choose from.

Description : Heat Transfer Experiments

Last Answer : Heat transfer experiments are basically experiments that deal with temperature, its characteristics and qualities. Heat transfer experiments are done for many purposes, but mainly to do investigations on the ... three are learned, it helps to have a better understanding of heat transfers as well.

Description : Fuel Transfer Pumps

Last Answer : A fuel transfer pump is used to move fuel from one container to another. These pumps are used to fuel cars, planes, agricultural equipment and other devices. They are typically used to transfer diesel and ... for quicker fueling. These models may cost more, but they will make your job a lot easier.

Description : How to transfer an apartment to a non-residential fund?

Last Answer : Can a private entrepreneur use his apartment as an office? The answer to this question depends on the type of activity. To sew, write poetry, fill out accounting documents, engage in tutoring, write ... is unacceptable. If you are not satisfied with this decision, you can appeal it in court.

Description : Calculate the rate of heat transfer by radiation from an unlagged steam pipe, 50 mm o.d. at 393K to air at 293K emissivity e = 0.9.

Last Answer : Rate of heat transfer by radiation Assume length of pipe = 1 m

Description : Give the unit of overall heat transfer coefficient in SI and MKS.

Last Answer : Unit of overall heat transfer coefficient 1. In SI : W/m2K 2. In MKS : kcal/hr m2K

Description : Define film heat transfer coefficient.

Last Answer : Film heat transfer coefficient: Film heat transfer coefficient h is defined as the quantity of heat transferred in unit time through unit area at a temperature difference of 10 between the surface and surrounding.

Description : Define steady state heat transfer.

Last Answer : Steady state heat transfer: Heat transfer where temperature remains same with respect to time and the rate of heat transfer does not vary with time.

Description : Transfer switch

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : A transfer function has a second order denominator and constant gain in the numerator

Last Answer : A transfer function has a second order denominator and constant gain in the numerator the system has two zeros at infinity

Description : The reactive power transfer over a line mainly depends on

Last Answer : The reactive power transfer over a line mainly depends on lVsl- lVRl

Description : With the knowledge of the state variable representation of a plant the transfer function of the plant 

Last Answer : With the knowledge of the state variable representation of a plant the transfer function of the plant can be determined completely

Description : For maximum transfer of power, internal resistance of the source should be?

Last Answer : For maximum transfer of power, internal resistance of the source should be equal to load resistance.

Description : For high efficiency of transfer of power, internal resistance of the source should be?

Last Answer : For high efficiency of transfer of power, internal resistance of the source should be less than the load resistance.

Description : Explain data transfer mechanism in I2C protocol. Compare it with CAN and USB protocol based on bit rate and area of applications.

Last Answer : I2C (Inter-Integrated Circuit): I2C stands for Inter-Integrated Circuit. I2C is a serial protocol. It was developed by Philips Semiconductor. I2C bus have two communication lines. One is serial data ( ... Mbps this is used for lower speed devices. Using USB we can connect upto 127 devices.

Description : How do you make wind turbines safe for flying creatures?

Last Answer : big-ass scarecrows?

Description : Explain with reason through which side of shell and tube heat exchanges, the following liquids are directed. (i) viscous liquid (ii) high pressure liquid (iii) corrosive liquid

Last Answer : Viscous liquid : Viscous liquid is passed through shell side Reason: because of the presence of baffles in the shell induce turbulence and hence increases heat transfer rate. High pressure liquid: High ... To avoid expensive alloy shells (in order to save the cost of expensive material for shell).

Description : With neat sketch explain the construction and working of heat exchanger used for handling corrosive liquid.

Last Answer : Graphite block heat exchanger:   Graphite heat exchangers are well suited for handling corrosive fluids. Graphite is inert towards most corrosive fluids and has very high thermal conductivity. Graphite being ... vertical faces direct the service fluid through the exchanger in a cross flow.

Description : Explain the type of multiple effect evaporator feed arrangement used for handling viscous liquid.

Last Answer : Backward feed arrangement  If the liquid is very viscous, then we have to adopt backward feed arrangement. In this arrangement, the feed solution and vapour flow is in opposite direction. Fresh feed is ... Not very common as it need pump. At low values of feed temperature higher economy.

Description : Explain Wilson plot.

Last Answer : Wilson Plot: The Wilson plot method was developed by Wilson in 1915 to evaluate the convection coefficients in shell and tube condensers for the case of a vapour condensing outside by means of ... resistance and the remaining thermal resistances participating in the heat transfer process.

Description : Explain Kirchhoff’s Law with its mathematical expression in detail.

Last Answer : Kirchoff's law of radiation: Kirchoff's law: It states that at equilibrium temperature, the ratio of total emissive power of any body to absorptivity depends only upon the temperature of the body. ... respectively. At thermal equilibrium, absorption and emission rates are equal, thus,

Description : With a neat diagram explain the construction of calendria type evaporator.

Last Answer : Calendria type(Short tube) evaporator: Construction: It consists of vertical cylindrical shell incorporating short vertical tube bundle with horizontal tube sheet. Vapour inlet is provided at top ... sheet, while non condensable gas is vented to atmosphere from point near top tube sheet.

Description : Draw a neat labelled diagram of 1-2 shell and tube heat exchanger. 

Last Answer : 1-2 shell and tube heat exchanger: 

Description : Define the following terms : (i) absorptivity (ii) reflectivity (iii) transmissivity (iv) emissivity

Last Answer : Absorptivity: It is the fraction of total incident radiation which is absorbed by a body. Reflectivity: It is the fraction of total incident radiation which is reflected by a body.  Transmissivity: It ... total emissive power of a body to emissive power of a black body at the same temperature. 

Description : Explain the properties of solution that influences evaporation.

Last Answer : Properties of evaporating liquid 1. Concentration: As the concentration increases, the solution becomes more and more individualistic. The viscosity and density increase with solid content. The boiling point of ... is a problem, special materials such as copper, nickel, stainless steel may be used.

Description : Explain the concept of optimum thickness of insulation.

Last Answer : Optimum thickness of insulation: The optimum thickness of an insulation is obtained by purely economic approach. The greater the thickness, the lower the heat loss & the greater the initial cost of ... sum values of heat lost and annual fixed charges) of the insulation is minimum. 

Description : Give expression for the following and explain the terms involved. (i) Nusselt number (ii) Prandtl number

Last Answer : 1. Nusselt NumberNNU= hd/k  h – fim heat transfer coefficient  d - diameter of pipe  k – thermal conductivity of fluid 2. Prandtl Number NPR -Cp µ/k Cp– specific heat of fluid µ - viscosity of fluid  k – thermal conductivity

Description : Define capacity and economy of evaporator.

Last Answer : The capacity of an evaporator is defined as the number of kilogram of water evaporated per hour. The economy of an evaporator is defined as the number of kilogram of water evaporated per kilogram of steam fed to the evaporator.

Description : Name any four types of shell and tube heat exchanger.

Last Answer : Four types of shell and tube heat exchanger: 1. Fixed tube heat exchanger 2. Floating head heat exchanger 3. U- tube type heat exchanger 4. Kettle/ Reboiler type heat exchanger

Description : Define radiation and give one example.

Last Answer : Radiation: Radiation is transfer of energy through space by electromagnetic waves. If radiation is passing through empty space, it is not transformed into other forms of energy, nor is it diverted from its ... only the absorbed energy that appears as heat. Example: Loss of heat from unlagged pipe. 

Description :  Answer the following S. No Statement Chose the correct  answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the ... of RPM  meter is used and for a visible shaft-end _______ type of  RPM meter is used.

Last Answer : Sr  No Statement Chose the correct  answer OR Fill-in-the-blanks Solution 1 Fyrite measures CO2, O2 and  SO2 True/False False 2 Ultrasonic Flow Meter uses the  principle of____& ____ ... ]  10 In a gasification system the  reduction zone is above the  combustion zone True/False False