The vertical spacing between ties must be no more than?
a. 8m (26 feet)
b. 10m (33 feet)
c. 12m (39 feet)
d. 6m (20 feet)

1 Answer

Answer :

a. 8m (26 feet)

Related questions

Description : hat is the horizontal spacing between tie? a. No more than 5m (16 feet) b. No more than 9m (30 feet) c. No more than 7m (23 feet) d. No more than 38m (125 feet)

Last Answer : b. No more than 9m (30 feet)

Description : The headroom above a working platform must be at least? a. 1.6m b. 2.1m c. 2m d. 2.6m

Last Answer : c. 2m

Description : At what height must top rails be fitted above working platform? a. Between 90 cm (35 inches) and 110 cm (43 inches) b. Between 100 cm (39 inches) and 120 cm (47 inches) c. Between 95 cm (38 inches) and 115 cm ( 45 inches) d. Between 105 cm (41 inches)and 125 cm (49 inches)

Last Answer : c. Between 95 cm (38 inches) and 115 cm ( 45 inches)

Description : The vertical distance clearance between the bottoms of the toe board? a. 0mm (0 inch) b. 6mm ( ¼ inch) c. 3mm ( 1/8 inch)

Last Answer : b. 6mm ( ¼ inch)

Description : The travel distance to an exit point on a working platform must be no more than? a. 7.4m b. 45m c. 15m d. 60m

Last Answer : c. 15m

Description : The gap between scaffold planks (boards) must be no more than? a. 150mm (6 inches) b. 50mm (2 inches) c. 75mm (3 inches) d. 25mm (1 inch)

Last Answer : d. 25mm (1 inch)

Description : A guardrail system must be fitted if the distance between a working platform a wall is more than? a. 100mm (4 inches) b. 360mm (14 inches) c. 200mm (8 inches) d. 460mm (18 inches)

Last Answer : b. 360mm (14 inches)

Description : Where must longitudinal (façade) bracing be installed on a length whose is greater than its height? a. Every Third post b. Every post c. Every Fifth post d. Every Second post

Last Answer : c. Every Fifth post

Description : The width of a scaffold platform or walkways must be at least? a. 3 planks 675mm (27 inches) b. 2 planks 450mm (18 inches) c. 5 planks 1,125mm (45 inches) d. 4 planks 900mm (30 inches)

Last Answer : a. 3 planks 675mm (27 inches)

Description : Planks must be overlapped a minimum of ------

Last Answer : 12 inches.

Description : The height of a toe board must be at least? a. 100mm (4 inches) b. 200mm (8 inches) c. 150mm (6 inches) d. 230mm (9 inches)

Last Answer : c. 150mm (6 inches)

Description : What is the minimum height an access ladder must extend above the landing?

Last Answer : 1m

Description : At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Last Answer : a. 35-55 degree

Description : Screw jack can be adjusted no more than? a. 300mm (12 inches) of threaded length showing b. 2/3 of the total threaded length showing c. 150mm (6 inches) of threaded length showing d. 1/3 of the total threaded length showing

Last Answer : b. 2/3 of the total threaded length showing

Description : Three friends X, Y and Z run a running race, Y finished 12 meters ahead of Z and 18 m ahead of X, while Z finished 8m ahead of X. If each friends runs the entire distance at their respective constant speeds, what is the length of the race? a) 16m b) 48m c) 24m d) 12m 

Last Answer : B Let the length of the race track be 'd'. When Y finished the race, X and Z would have run (d−18) and (d−12) meters respectively. When Z finishes the race, X would have run (d-8) meters. The ratio of ... d2 -20d+96= d2 -18d 20d-18d=96 d=96/2=48m hence the length of the race track is 48m

Description : What is 6m and 12m surface area on a cylinder?

Last Answer : 286.3

Description : A bayabas falls from a branch 5m above the ground with what speed in meter per second does it strike the ground assume g = 10m/s².  a. 11m/s  b. 12m/s  c. 13m/s  d. 10m/s ∫KE = mV2/2gc

Last Answer : 10m/s

Description : What is the minimum overlap required when splicing bracing? a. 300mm (12 inches) b. 400mm (16 inches) c. 600mm (24 inches) d. 450mm (18 inches)

Last Answer : a. 300mm (12 inches)

Description : What is the maximum height allowed between ladder landings?

Last Answer : 6m (or 3 lifts)

Description : What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Last Answer : d. To add rigidity to the scaffold

Description : What maximum load would you place on a right angle coupler?

Last Answer : 630kg (or 630kgf or 6.25kN)

Description : What is the maximum load you would lift with a gin wheel?

Last Answer : 50kg

Description : What is the maximum distance that bracing can be installed from a node point on a scaffold? a. 200mm (8 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 250mm (10 inches)

Last Answer : b. 300mm (12 inches)

Description : What is the maximum number of open bays if transverse zig zag bracing is installed along the width of a birdcage scaffold? a. Four b. Three c. Five d. Six

Last Answer : b. Three

Description : What is the main function of bracing? a. To correct any incorrect measurements b. To enable easy inspection of the scaffold c. To make the scaffold square d. To add rigidity to the scaffold

Last Answer : d. To add rigidity to the scaffold

Description : What minimum width of timber would you use as a soleplate?

Last Answer : 220mm (or 225mm, or the width of a scaffold plank)

Description : What is the minimum size of a square baseplate?

Last Answer : 150mm x 150mm (or 225cm2)

Description : What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Last Answer : c. 150mm (6 inches

Description : Find the cost of digging a cuboidal pit 8m long, 6m broad and 3m deep at the rate of Rs 30 per m3 -Maths 9th

Last Answer : The given pit has its length(l) as 8m, width (b)as 6m and depth (h)as 3 m. Volume of cuboidal pit = l×b×h = (8×6×3) = 144 (using formula) Required Volume is 144 m3 Now, Cost of digging per m3 volume = Rs 30 Cost of digging 144 m3 volume = Rs (144×30) = Rs 4320

Description : ABCD is a parallelogram AE pependicular to DC CF perpendixular to AD AB =16 m ,AE =8m ,CF =10m ,fimd AD -Maths 9th

Last Answer : This answer was deleted by our moderators...

Description : Height gauges should be located at a minimum distance of….. from gate post. (a) 5 m (b) 7.5m (c) 8m* (d)10m

Last Answer : (c) 8m*

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

Description : An aeroplane of 110,000kg has its CG at 22.6m aft of the datum. The CG limits are 18m to 22m aft of the datum. How much mass must be removed from a hold 30m aft of the datum to bring the CG to its mid point? a. 26,800 kg b. 28,600 kg c. 86,200 kg d. 62,800 kg

Last Answer : b. 28,600 kg

Description : An aeroplane of 110,000kg has its CG at 22.6m aft of the datum. The CG limits are 18m to 22m aft of the datum. How much mass must be removed from a hold 30m aft of the datum to bring the CG to its mid point? a. 26,800 kg b. 28,600 kg c. 86,200 kg d. 62,800 kg

Last Answer : b. 28,600 kg

Description : To the nearest rupee, what is the net present value of a replacement project whose cash flows are -Rs.104,000; Rs.34,444; Rs.39,877; Rs.25,000; and Rs.52,800 for years 0 through 4, respectively? The firm has decided to ... -free rate is 6%. A. Rs.15,115 B. Rs.26,798 C. Rs.33,346 D. Rs.48,121

Last Answer : C. Rs.33,346

Description : A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant ... inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Last Answer : (C) 12°

Description : If the price of Mango is Rs. 130 per kg, Apple is Rs. 140 per kg and Orange is Rs. 80 per kg, then what is the ratio of their cost at vendor A? 1) 11 : 14 : 16 2) 39 : 28: 20 3) 39 : 28 : 21 4) 15 : 14 : 11 5) 39 : 26 : 20

Last Answer : 2) 39 : 28: 20

Description : In a colar beam roof (A) There is no horizontal tie beam (B) There is a horizontal tie at the feet of rafters only (C) There is a horizontal tie at almost the middle of rafters only (D) There are two horizontal ties, one at the feet and other at the middle of the rafters

Last Answer : Answer: Option C

Description : If the Sales is Rs.100 crores, EBIT is Rs.30 crores, PAT is Rs.20 crores and Total Assets is Rs.300 crores, then the return on assets (ROA) is given by A. 6.67% B. 10% C. 33.33% D. 23.33% E. 26.67%

Last Answer : B. 10%

Description : Find the force on a conductor of length 12m and magnetic flux density 20 units when a current of 0.5A is flowing through it. a) 60 b) 120 c) 180 d) 200

Last Answer : b) 120

Description : Students of two university appeared for a common test of maximum 60 marks. The average of their marks for university 1 & university 2 are 39 & 42 respectively. If the no of students of university 1 is twice the no ... the average marks of all students of both the university? A) 40 B) 42 C) 26 D) 36

Last Answer : Answer: A) Let number of students of university2 be N and the no of students of university 1 be 2N the average of university1 and university 2 is 39 and 42 total marks of university 1 students and university 2 ... 78N and N*42 =42N average of both university,  =(78N+42N) /(N+2N) = 40 marks

Description : Basic values of span/effective depth ratios to be used for beams and slabs with spans [ A ] Less than 10m [ B ] Less than 20 m [ C ] 10 m- 20 m [ D ] More than 20 m

Last Answer : [ A ] Less than 10m

Description : On Indian Railways standard length of rails for Meter Gauge track, is A. 33 ft (10.06 m) B. 36 ft (10.97 m) C. 39 ft (11.89 m) D. 42 ft (12.8 m)

Last Answer : C [39 ft (11.89 m)]

Description : On Indian Railways standard length of rails for Broad Gauge track, is A. 33 ft (10.06 m) B. 36 ft (10.97 m) C. 39 ft (11.89 m) D. 42 ft (12.8 m)

Last Answer : D [42 ft (12.8 m)] Explanation: Indian Railways is divided into 18 zones. Recently added South Coast Railway zones in Indian Railway (2019).

Description : Which Article of the Indian Constitution provides free legal aid and equal justice? (1) 30 (2) 25 (3) 39-A (4) 33-B

Last Answer : (3) 39-A Explanation: Article 39A of the Constitution of India provides for free legal aid to the poor and weaker sections of the society and ensures justice for all. Article 14 and

Description : 40 39 32 37 16 ? -8 a) 35 b) 36 c) 33 d) 32 e) 40

Last Answer : The series is + (1^2 - 2), – (2^2 + 3), + (3^2 - 4), –(4^2 + 5), ..... Answer: a)

Description : Insert the missing number: 36/62, 39/63, 43/61, 48/64, ? (A) 51/65 (B) 56/60 (C) 54/60 (D) 33/60

Last Answer : Answer: C Observer 36/62, 39/63, 43/61, 48/64, ? series Upper part is increase by 3, 4, 5, 6 i.e 36+3= 39, 39+4 = 43, 43+5 = 48, 48 + 6 = 54.

Description : How many b1 fire extinguishers must aboard motorboats between 26 and 40 feet have aboard?

Last Answer : two

Description : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} ... Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Last Answer : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected ... =20 \angle-55^{\circ} \Omega \] (10M)

Description : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected between the respective lines and the neutral. Calculate the current in the neutral wire?\[Z_{R}=20 \angle 0^{\circ} ... Z_{Y}=20 \angle 35^{\circ} \Omega, Z_{B}=20 \angle-55^{\circ} \Omega\](10M)

Last Answer : 4. A three-phase, four-wire system having \( 250 V \) line-to-neutral has the following loads connected ... =20 \angle-55^{\circ} \Omega \] (10M)