Boiler rating is usually defined in terms of

Boiler rating is usually defined in terms of 

(1) Maximum temperature of steam in Kelvin (2) Heat transfer rate in KJ/hr (3) Heat transfer area in metre2 (4) Steam output in kg/hr

by

1 Answer

Answer :

Boiler rating is usually defined in terms of Steam output in kg/hr

by

Related questions

The fuse rating is expressed in terms of?

Last Answer : The fuse rating is expressed in terms of current.

The transformer ratings are usually expressed in terms of?

Last Answer : The transformer ratings are usually expressed in terms of kVA.

How rating of main switch and cable is selected for Industrial Installation.

Description : How rating of main switch and cable is selected for Industrial Installation.

Last Answer : 1. Rating of Main Switch or Fuse Rating is decided in industrial installation: Rating of main switch or fuse is based up the starting current of motor. For calculating starting current is considered 2 ... take 1.5 times the rated current or full load current. & thus cable rating is decided.

Why Transformer rating is given in kVA?

Description : Why Transformer rating is given in kVA?

Last Answer : Because of core losses and iron losses as core losses are measured in amps and cu losses in voltage ....this is definatly reason for the rating Or kVA is the unit for apparent power. Apparent ... shift between voltage and current). So a transformer has to be rated (and selected) by apparent power.

Define kVA rating of transformer.

Description : Define kVA rating of transformer.

Last Answer : kVA rating of transformer is defined as the product of voltage (V) and current (I) on primary side of transformer or secondary side of transformer divided by 1000. On both side the VA rating remains ... Mathematically kVA rating is given by, kVA rating of transformer = V1I1/1000 =V2I2/1000

The rating of transformer may be expressed in ____________.

Description : The rating of transformer may be expressed in ____________.  (A) kVAR (B) kW (C) kVA (D) Horse power

Last Answer : The rating of transformer may be expressed in kVA . 

The kVA rating of Three-phase transformer with Voltage = 200V and Current = 100A will be :

Description : The kVA rating of Three-phase transformer with Voltage = 200V and Current = 100A will be :  (A) 34.64 kVA (B) 75 kVA (C) 20 kVA (D) None of the above

Last Answer : The kVA rating of Three-phase transformer with Voltage = 200V and Current = 100A will be : 34.64 kVA

For the same H.P. rating and full load speed, following motor has poor starting torque?

Last Answer : For the same H.P. rating and full load speed, following motor has poor starting torque differentially compounded.

The wattage rating for a ceiling fan motor will be in the range?

Last Answer : The wattage rating for a ceiling fan motor will be in the range 50 to 150 W .

Where would you rate Ronald Reagan among US Presidents?

Description : Where would you rate Ronald Reagan among US Presidents?

Last Answer : I think the “fat little dutchman” did good, made me laugh on numerous occasions.

On a scale from 0 to 10, how do you rate the numbers in that scale?

Description : On a scale from 0 to 10, how do you rate the numbers in that scale?

Last Answer : 1: 1 2: 2 3: 3 4: 4 5: 7 6: 5 7: 6 8: 10 9: 8 10: 9

What is the time of operation of a relay of rating 5 amp 2.2 sec, ...

Description : What is the time of operation of a relay of rating 5 amp 2.2 sec, IDMT and having a relay of setting of 125% Tms = 0.6 It is connected to a supply circuit through a CT, 400 ratio. The fault current is 400 amp.

Last Answer : 1.92 sec is the time of operation of a relay of rating 5 amp 2.2 sec, IDMT and having a relay of setting of 125% Tms = 0.6 It is connected to a supply circuit through a CT, 400 ratio. The fault current is 400 amp.

Boiler feed water pump is usually a __________ pump.(A) Reciprocating (B) Gear (C) Multistage centrifugal (D) Diaphragm

Description : Boiler feed water pump is usually a __________ pump. (A) Reciprocating (B) Gear (C) Multistage centrifugal (D) Diaphragm

Last Answer : (C) Multistage centrifugal

The capacity of a battery is expressed in terms of A. Current rating B. Voltage rating C. Ampere hour rating D. None of the above

Description : The capacity of a battery is expressed in terms of A. Current rating B. Voltage rating C. Ampere hour rating D. None of the above

Last Answer : C. Ampere hour rating

Define the following terms related to circuit breaker. 1) Breaking Capacity 2) Making Capacity 3) Short time rating and 4) Normal current rating

Description : Define the following terms related to circuit breaker. 1) Breaking Capacity 2) Making Capacity 3) Short time rating and 4) Normal current rating

Last Answer : 1) Breaking Capacity: It is current (r.m.s) that a circuit breaker is capable of breaking at given recovery voltage under specified conditions (e.g. power factor, rate of rise of ... under specified conditions. The only limitation in this case is the temperature rise of current-carrying parts.

Which of the following is not usually a part of a transponder are defined by the A. LNA B. Mixer C. Modulator D. HPA

Description : Which of the following is not usually a part of a transponder are defined by the A. LNA B. Mixer C. Modulator D. HPA

Last Answer : C. Modulator

Which of the following is not usually defined as an element of the marketing mix ? 1. Products 2. Place 3. People 4. Profits 6. None of these

Description : Which of the following is not usually defined as an element of the marketing mix ? 1. Products 2. Place 3. People 4. Profits 6. None of these

Last Answer : Profits

Which of the following is NOT usually defined as an element of the marketing mix ? 1. Products 2. People 3. Place 4. Profits 5. None of these

Description : Which of the following is NOT usually defined as an element of the marketing mix ? 1. Products 2. People 3. Place 4. Profits 5. None of these

Last Answer : Profits

Co-efficient of discharge (Cd ) is defined as actual discharge/theoretical discharge and is equal to Cc . Cv ; where Cc = Co-efficient of contraction and Cv = co-efficient of velocity. Cd of an orifice is usually about (A) 0.42 (B) 0.62 (C) 0.82 (D) 0.98

Description : Co-efficient of discharge (Cd ) is defined as actual discharge/theoretical discharge and is equal to Cc . Cv ; where Cc = Co-efficient of contraction and Cv = co-efficient of velocity. Cd of an orifice is usually about (A) 0.42 (B) 0.62 (C) 0.82 (D) 0.98

Last Answer : (B) 0.62

Co-efficient of discharge (Cd ) is defined as actual discharge/theoretical discharge and is equal to Cc . Cv ; where Cc = Co-efficient of contraction and Cv = co-efficient of velocity. Cd of an orifice is usually about (A) 0.42 (B) 0.62 (C) 0.82 (D) 0.98

Description : Co-efficient of discharge (Cd ) is defined as actual discharge/theoretical discharge and is equal to Cc . Cv ; where Cc = Co-efficient of contraction and Cv = co-efficient of velocity. Cd of an orifice is usually about (A) 0.42 (B) 0.62 (C) 0.82 (D) 0.98

Last Answer : (B) 0.62

A thread is usually defined as a light weight process because an Operating System (OS) maintains smaller data structure for a thread than for a process. In relation to this, which of the following statement is correct? (A) OS maintains only scheduling and accounting information for each thread. (B) OS maintains only CPU registers for each thread. (C) OS does not maintain a separate stack for each thread. (D) OS does not maintain virtual memory state for each thread.

Description : A thread is usually defined as a light weight process because an Operating System (OS) maintains smaller data structure for a thread than for a process. In relation to this, which of the following ... separate stack for each thread. (D) OS does not maintain virtual memory state for each thread.

Last Answer : (B) OS maintains only CPU registers for each thread.

Which of these terms is defined as buying a lower-priced product rather than a more expensive?

Description : Which of these terms is defined as buying a lower-priced product rather than a more expensive?

Last Answer : I cannot see the terms, but it may be purchasing power.

Which of these terms can also be defined as positive space?

Description : Which of these terms can also be defined as positive space?

Last Answer : Figure A+Answered by Mia~

The difference between visible exports and visible imports is defined as - (1) Balance of trade (2) Balance of payment (3) Balanced terms of trade (4) Gains from trade

Description : The difference between visible exports and visible imports is defined as - (1) Balance of trade (2) Balance of payment (3) Balanced terms of trade (4) Gains from trade

Last Answer : (1) Balance of trade Explanation: The balance of trade (or net exports, sometimes symbolized as NX) is the difference between the monetary value of exports and imports of output in an economy over a certain period. It is the relationship between a nation's imports and exports.

. A project is typically defined in terms of scope, time, cost and which other parameter? a. Benefits. b. Quality. c. Tolerance. d. Controls.

Description : . A project is typically defined in terms of scope, time, cost and which other parameter? a. Benefits. b. Quality. c. Tolerance. d. Controls.

Last Answer : b. Quality.

A project is typically defined in terms of scope, time, b. Quality. c. Tolerance. d. Controls.cost and which other parameter? a. Benefits.

Description : A project is typically defined in terms of scope, time, cost and which other parameter?  a. Benefits. b. Quality.  c. Tolerance.  d. Controls.

Last Answer : b. Quality.

Traditionally, companies have defined their business in product terms or in technological terms. Howevermisison statements should be all of the following EXCEPT :1. Market Oriented 2. A statement of religion 3. motivating 4. based on distinctive competencies 5. none of these

Description : Traditionally, companies have defined their business in product terms or in technological terms. However misison statements should be all of the following EXCEPT : 1. Market Oriented 2. A statement of religion 3. motivating 4. based on distinctive competencies 5. none of these

Last Answer : A statement of religion

Capacity of a hydraulic accumulator is defined in terms of maximum (A) Amount of energy stored (B) Flow rate through accumulator(C) Rate of falling of ram(D) Volume available in the cylinder

Description : Capacity of a hydraulic accumulator is defined in terms of maximum (A) Amount of energy stored (B) Flow rate through accumulator (C) Rate of falling of ram (D) Volume available in the cylinder

Last Answer : (A) Amount of energy stored

Species are considered as (a) real basic units of classification (b) the lowest units of classification (c) artificial concept of human mind which cannot be defined in absolute terms (d) real units of classification devised by taxonomists.

Description : Species are considered as (a) real basic units of classification (b) the lowest units of classification (c) artificial concept of human mind which cannot be defined in absolute terms (d) real units of classification devised by taxonomists.

Last Answer : (c) artificial concept of human mind which cannot be defined in absolute terms

Which of the following terms has been defined by the American Psychiatric Association as a group of behavioral or psychological symptoms or a pattern that manifests itself in significant distress, impaired functioning, or accentuated risk of enduring severe suffering or possible death? a) Mental disorder The definition was adopted by the American Psychiatric Association in 1994. b) Emotional disorder There is no universally accepted definition of what constitutes an emotional disorder. c) Anxiety Anxiety is defined as fear of the unknown. d) Schizophrenia Schizophrenia is a specific disorder characterized by psychosis.

Description : Which of the following terms has been defined by the American Psychiatric Association as a group of behavioral or psychological symptoms or a pattern that manifests itself in significant distress ... of the unknown. d) Schizophrenia Schizophrenia is a specific disorder characterized by psychosis.

Last Answer : a) Mental disorder The definition was adopted by the American Psychiatric Association in 1994.

An advertising platform consists of the A)basic issues or selling points that an advertiser wishes to include in the advertising campaign. B)clearly defined objectives of the advertising campaign, stated in precise and measurable terms. C)form in which the basic issues of the campaign should be presented. D)broad objectives of the advertising campaign.

Description : An advertising platform consists of the A)basic issues or selling points that an advertiser wishes to include in the advertising campaign. B)clearly defined objectives of the advertising campaign, ... basic issues of the campaign should be presented. D)broad objectives of the advertising campaign.

Last Answer : D)broad objectives of the advertising campaign.

The difference between visible exports and visible imports is defined as (1) Balance of trade (2) Balance of payment (3) Balanced terms of trade (4) Gains from trade

Description : The difference between visible exports and visible imports is defined as (1) Balance of trade (2) Balance of payment (3) Balanced terms of trade (4) Gains from trade

Last Answer :  Balance of trade

The international standard of Length is defined in terms of : -

Description :  The international standard of Length is defined in terms of : - a) Length of earth's meridian passing through Paris b) The distance between two lines engraved on a Platinum -iridium Bar c,) Wavelength in vacuum, of radiation of Krypton -86 atom cP None of the above

Last Answer :  The international standard of Length is defined in terms of : - The distance between two lines engraved on a Platinum -iridium Bar 

International ohm is defined in terms of the resistance of?

Description : International ohm is defined in terms of the resistance of?

Last Answer : International ohm is defined in terms of the resistance of a column of mercury.

If you're on "un speaking" terms with someone, don't you usually have a solid sense of why?

Description : If you're on "un speaking" terms with someone, don't you usually have a solid sense of why?

Last Answer : what is the question exactly?

In medical terms If the singular term ends in -a the plural is usually formed by changing the ending to?

Description : In medical terms If the singular term ends in -a the plural is usually formed by changing the ending to?

Last Answer : Need answer

Masses of starts and galaxies are usually expressed in terms of :

Description : Masses of starts and galaxies are usually expressed in terms of :

Last Answer : Solar mass

Cable attenuation is usually expressed in terms of a. Loss per foot b. dB/km c. intensity per mile d. voltage drop per inch

Description : Cable attenuation is usually expressed in terms of a. Loss per foot b. dB/km c. intensity per mile d. voltage drop per inch

Last Answer : b. dB/km

Masses of stars and galaxies are usually expressed in terms of which mass?

Description : Masses of stars and galaxies are usually expressed in terms of which mass?

Last Answer : Solar mass

A/B Testing results are usually given in? A. mathematical B. statistical terms C. Both A and B D. None of the above

Description : A/B Testing results are usually given in? A. mathematical B. statistical terms C. Both A and B D. None of the above

Last Answer : C. Both A and B

Which of the following terms is used to describe the opening of the urethra on the dorsum of the penis? a) Epispadias Epispadias is a congenital anomaly in which the urethral opening is on the dorsum of the penis and is usually repaired through plastic surgery when the boy is very young.

Description : Which of the following terms is used to describe the opening of the urethra on the dorsum of the penis? a) Epispadias Epispadias is a congenital anomaly in which the urethral ... Urethritis Urethritis refers to inflammation of the urethra and is commonly associated with sexually transmitted disease.

Last Answer : a) Epispadias Epispadias is a congenital anomaly in which the urethral opening is on the dorsum of the penis and is usually repaired through plastic surgery when the boy is very young.

Which of the following terms is used to describe stone formation in a salivary gland, usually the submandibular gland? a) Sialolithiasis Salivary stones are formed mainly from calcium phosphate. b) Parotitis Parotitis refers to inflammation of the parotid gland. c) Sialadenitis Sialadenitis refers to inflammation of the salivary glands. d) Stomatitis Stomatitis refers to inflammation of the oral mucosa.

Description : Which of the following terms is used to describe stone formation in a salivary gland, usually the submandibular gland? a) Sialolithiasis Salivary stones are formed mainly from calcium phosphate. b ... of the salivary glands. d) Stomatitis Stomatitis refers to inflammation of the oral mucosa.

Last Answer : a) Sialolithiasis Salivary stones are formed mainly from calcium phosphate.

Which of the following terms refers to the decrease in lens flexibility that occurs with age, resulting in the near point of focus getting farther away? a) Presbyopia Presbyopia usually begins in the fifth decade of life, when reading glasses are required to magnify objects. b) Presbycusis Presbycusis refers to age-related hearing loss. c) Cataract Cataract is the development of opacity of the lens of the eye. d) Glaucoma Glaucoma is a disease characterized by increased intraocular pressure.

Description : Which of the following terms refers to the decrease in lens flexibility that occurs with age, resulting in the near point of focus getting farther away? a) Presbyopia Presbyopia usually begins in ... lens of the eye. d) Glaucoma Glaucoma is a disease characterized by increased intraocular pressure.

Last Answer : a) Presbyopia Presbyopia usually begins in the fifth decade of life, when reading glasses are required to magnify objects.

Cable attenuation is usually expressed in terms of ∙ A. loss per foot ∙ B. dB/km ∙ C. intensity per mile ∙ D. voltage drop per inch

Description : Cable attenuation is usually expressed in terms of ∙ A. loss per foot ∙ B. dB/km ∙ C. intensity per mile ∙ D. voltage drop per inch

Last Answer : . dB/km

Cable attenuation is usually expressed in terms of ∙ a. Loss per foot ∙ b. dB/km ∙ c. intensity per mile ∙ d. voltage drop per inch

Description : Cable attenuation is usually expressed in terms of ∙ a. Loss per foot ∙ b. dB/km ∙ c. intensity per mile ∙ d. voltage drop per inch

Last Answer : ∙ b. dB/km

The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Description : The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Last Answer : B. Percent elongation

Piggyback, fishyback, and birdyback are terms usually associated with gaining efficiency in shipping through A)transit time. B)loading cartridges. C)packaging. D)containerisation.

Description : Piggyback, fishyback, and birdyback are terms usually associated with gaining efficiency in shipping through A)transit time. B)loading cartridges. C)packaging. D)containerisation.

Last Answer : D)containerisation.

The transformer ratings are usually expressed in terms of A. Volts B. Amperes C. kW D. kVA

Description : The transformer ratings are usually expressed in terms of A. Volts B. Amperes C. kW D. kVA

Last Answer : D) KVA