In a series RLC high Q circuit, the current peaks at a frequency 

(1) equal to the resonant frequency (2) greater than the resonant frequency (3) less than the resonant frequency (4) equal to half the resonant frequency

1 Answer

Answer :

In a series RLC high Q circuit, the current peaks at a frequency equal to the resonant frequency

Related questions

Description : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of?

Last Answer : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of L or C.

Description : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?

Last Answer : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C? 7 V

Description : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

Last Answer : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

Description : In a series R-C circuit, with the increase in frequency, current (A) Reduces (B) Increases (C) Does not change (D) Becomes zero

Last Answer : In a series R-C circuit, with the increase in frequency, current Increases

Description : The loop equation for a series RLC circuit gives

Last Answer : The loop equation for a series RLC circuit gives

Description : In parallel RLC resonance circuit at resonance the current will be  (1) Minimum (2) Maximum (3) Zero (4) Infinite

Last Answer : In parallel RLC resonance circuit at resonance the current will be Minimum 

Description : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is

Last Answer : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is 500 Hz

Description : In a series L-C circuit at the resonant frequency the?

Last Answer : In a series L-C circuit at the resonant frequency the current is maximum.

Description : Magnitude of current at resonance in R-L-C circuit?

Last Answer : The current will be maximum if it is a series rlc circuit.

Description : In a loss-free R-L-C circuit the transient current is?

Last Answer : In a loss-free R-L-C circuit the transient current is sinusoidal.

Description : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Last Answer : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Last Answer : When the total impendance equals  supply frequency.

Description : If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Last Answer : 0.1s

Description : In a R-L-C circuit?

Last Answer : In a R-L-C circuit power is consumed in resistance and is equal to I R, exchange of power takes place between inductor and supply line, exchange of power takes place between capacitor and supply line, exchange of power does not take place between resistance and the supply line.

Description : The power factor at resonance in R-L- C parallel circuit is?

Last Answer : since a rlc circuit at resonance behaves like a pure resistive circuit, i.e there is no phase difference between current and voltage, hence the power factor is unity.

Last Answer : For measuring current at high frequency we should use thermocouple instrument.

Description : The frequency of an alternating current is?

Last Answer : The frequency of an alternating current is the number of waves passing through a point in one second.

Description : Source transformation Replace the circuit with voltage source in series with a single resistor

Last Answer : Source transformation Replace the circuit with voltage source in series with a single resistor

Description : Series circuit rules

Last Answer : Series circuit rules

Description : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Last Answer : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Description : Which of the following is true with a series circuit having resistors of different values? A) The total resistance of the circuit is the sum of the individual resistances B) The current across each ... ) The voltage drop across each resistor depends on the value of the resistor D) All the above

Last Answer : Which of the following is true with a series circuit having resistors of different values? A) The total resistance of the circuit is the sum of the individual resistances B) The current across ... voltage drop across each resistor depends on the value of the resistor D) All the above

Description : In a series circuit with unequal resistances?

Last Answer : In a series circuit with unequal resistances the highest resistance has the highest voltage drop.

Description : The series and parallel resonance on L-C circuit differs in that?

Last Answer : The series and parallel resonance on L-C circuit differs in that series resistance needs a low-resistance source for sharp rise in current.

Description : At very low frequencies a series R-C circuit behaves as almost purely?

Last Answer : At very low frequencies a series R-C circuit behaves as almost purely capacitive.

Description : The time constant of a series R-C circuit is given by?

Last Answer : The time constant of a series R-C circuit is given by RC.

Description : In series resonant circuit, increasing inductance to its twice value and reducing capacitance to its half value?  

Last Answer : In series resonant circuit, increasing inductance to its twice value and reducing capacitance to its half value will increase the selectivity of the circuit.

Description : In a series resonant circuit, the impedance of the circuit is?

Last Answer : In a series resonant circuit, the impedance of the circuit is minimum.

Description : A universal RLC bridge uses?

Last Answer : A universal RLC bridge uses Maxwell Wein bridge for measurement of inductance and modified De Santy's bridge for measurement of capacitance.

Description : If the % reactance upto the fault point is 20%, then the short circuit current will be

Last Answer : If the % reactance upto the fault point is 20%, then the short circuit current will be 5 times the full load current

Description : The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole)  (A) has q -axis current only (B) has d -axis current only (C) has both d and q axis currents (D) cannot be divided between q and d axis currents

Last Answer : The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole) has d -axis current only

Description : When one leg of parallel circuit is opened out the total current will?

Last Answer : When one leg of parallel circuit is opened out the total current will decrease.

Description : Electric current passing through the circuit produces?

Last Answer : Electric current passing through the circuit produces thermal effect.

Description : In which fault the maximum short circuit current occurs?

Last Answer : In three phase bolted fault the maximum short circuit occurs.

Description : What is the direction of flow of electric current in an electric circuit?

Last Answer : It  flows  from  anode  to  cathode  (direction  of   holes  flow)

Description : In a series RLC circuit operating below the resonant frequency the current  (a) I leads Vs (b) I lags Vs (c) I is in Phase with Vs (d) None of these

Last Answer : In a series RLC circuit operating below the resonant frequency the current  I leads Vs 

Description : The time period of third harmonic of power supply frequency, in milliseconds, is (A) 20 (B) 3.33 (C) 6.66 (D) 60

Last Answer : The time period of third harmonic of power supply frequency, in milliseconds, is 6.66 

Description : In a circuit containing R, L and C, power loss can take place in?

Last Answer : In a circuit containing R, L and C, power loss can take place in R only.

Description : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor  A) Is always zero B) Can never be greater than the input voltage C) Can be greater than the input ... input voltage D) Can be greater than the input voltage, and is in phase with the input voltage

Last Answer : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor Can be greater than the input voltage, however, it is 90° out of phase with the input voltage 

Description : Find current through resistor using nodal analysis

Last Answer : Find current through resistor using nodal analysis

Description : Nodal analysis problem two current source

Last Answer : Nodal analysis problem two current source

Description : Which of the following theorems enables a number of voltage (or current) source to be combined directly into a single voltage (or current) source. (1) compensation theorem (2) reciprocity theorem (3) superposition theorem (4) Millman's theorem

Last Answer : Which of the following theorems enables a number of voltage (or current) source to be combined directly into a single voltage (or current) source. (1) compensation theorem (2) reciprocity theorem (3) superposition theorem (4) Millman's theorem

Description : The line current in a balanced delta system is 30 A. The load current is (A) 30√3 A (B) 30/√3 A (C) 10 A (D) 30/√2 A

Last Answer : The line current in a balanced delta system is 30 A. The load current is 30/√3 A

Description : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, (A) 0, ∞ (B) ∞, ∞ (C) ∞, 0 (D) 0,0

Last Answer : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, ∞, 0

Description : A network is said to be under resonance when the voltage and the current at the network input terminals are (A) in phase (B) out of phase (C) in phase quadrature (D) in phase, and have equal magnitudes

Last Answer : A network is said to be under resonance when the voltage and the current at the network input terminals are in phase

Description : In a pure resistive circuit, the average power Pavg is ______ the peak power Pmax. (1) Double (2) One-half of (3) One-fourth (4) Equal to

Last Answer : In a pure resistive circuit, the average power Pavg is One-half of the peak power Pmax.

Description : Which of the following are known as the short circuit parameters of a 2- port network? (A) Z- parameters. (B) H- parameters. (C) Y- parameters. (D) A,B,C,D, parameters.

Last Answer : Which of the following are known as the short circuit parameters of a 2- port network? (A) Z- parameters. (B) H- parameters. (C) Y- parameters. (D) A,B,C,D, parameters.

Description : An electrical circuit with 10 branches and 7 junctions will have

Last Answer : An electrical circuit with 10 branches and 7 junctions will have  4 loop equations.

Description : The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as

Last Answer : The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as non-linear circuit.

Description : The circuit whose properties are same in either direction is known as?

Last Answer : The circuit whose properties are same in either direction is known as bilateral circuit.

Description : What is a node in an electrical circuit?

Last Answer : a positively charged electrons