The necessary and sufficient condition for a rational function of, T(s) to be driving point impedance of an RC network is that all poles and zeros should be

1 Answer

Answer :

The necessary and sufficient condition for a rational function of, T(s) to be driving point impedance of an RC network is that all poles and zeros should be simple and and lie on the negative axis in the s -plane

Related questions

Description : Rational exponent (Algebra)

Last Answer : Rational exponent (Algebra)

Description : What is race around condition in JK flip flop and how it can be eliminated?

Last Answer : For the racing around to take place, it is necessary to have the enable input high along with J=K=1. As the enable input remains high for a long time in a JK latch, the problem of ... to zero. Hence the multiple toggling cannot take place. Thus the edge triggering avoids the race around condition.

Description : Explain working of n-p-n transistor in unbiased condition.

Last Answer : Construction of NPN transistor: For an unbiased transistor no external power supplies are connected to it. Base is sandwiched between collector & emitter terminal. It is thin & lightly doped ... providing external power supply to transistor & this process is known as Biasing.

Last Answer : The condition for maximum efficiency for a D.C. generator is variable losses equal to constant losses.

Last Answer : (b) Clostridium butylicum Lipase Removal of oil stains

Description : The r.m.s. value of pure cosine function is?

Last Answer : 0.707 of peak value

Description : Is the search function not working?

Last Answer : Search hasn’t been working for a while. I know that the tech mods are looking at it, but my impression is that it’s more complicated than any of the other fixes they’ve done.

Description : State at least one function and the material used for the following parts of DC Motor.

Last Answer : Part Function Material Yoke -Provides mechanical support for poles -Acts as protecting cover for machine -Provides path for magnetic flux Cast Iron OR Cast Steel Field Winding - ... Pole core  Provides mechanical support to field winding. Cast Iron OR Cast Steel

Description : Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Last Answer : 1. A step down transformer 2. A rectifier 3. A filter 4. A regulator Operation of Regulated Power Supply:- Step Down Transformer:- A step down transformer will ... regulator. A regulator will maintain the output constant even when changes at the input or any other changes occur.

Description : Draw block diagram of PLL as a FM demodulator. Explain function of each block.

Last Answer : Operation:  The FM signal which is to be demodulated is applied at the input of the PLL.  the PLL is locked to the FM  The error voltage produced at ... using PLL ensures a high Linearity, between the instantaneous input frequency and VCO control voltage (error amplifier output)

Description : Give the function of fuse and switch.

Last Answer : Functions of fuse:  * To break the circuit under fault condition.  * To provide overcurrent protection to the circuit.  * To provide short circuit protection to the circuit.  * To provide ...  * To make the electric circuit manually.  * To break the electric circuit manually.

Description : State function of ELCB.

Last Answer : Functions of ELCB: 1. Provides protection to apparatus by detecting the unsafe magnitudes of leakage currents diverting to earth. 2. Disconnect the supply to the circuit if line to ground ... 3. Provides protection to users by detecting the unsafe magnitudes of leakage currents diverting to earth.

Description : Write the function of freewheeling diode.

Last Answer : Function of Freewheeling Diode (FWD): a) Freewheeling diode is used across inductive loads such as coils, dc motor armature etc. to prevent voltage spikes across these loads when the switching ... current is shifted from switching device, it is turned off easily and regain its blocking ability.

Description : Describe the function of MUSE system for HDTV.

Last Answer : Bandwidth can be reduced by MUSE (Multiple Sub -Nyquist Sampling Encoding) system MUSE stands for Multiple Sub-Nyquist sampling encoding and is an HDTV bandwidth compression schemedeveloped by ... digital Audio system is called DANCE (Digital Audio Near-Instantaneous Compression and expansion). 

Description : applications of : (1) Function generator   (2) Video pattern generator (3) AF signal generator and (4) Pulse generator. 

Last Answer : 1) Function generator: i) As trouble shooting tool to different analog and digital circuits. ii) As a source of alignment of different receiver. iii) If rise time of square wave is ... trigger output, pulses are available. iii) The generator can be operated as free running generator.

Description : Draw neat block diagram of FM receiver and explain function of each block

Last Answer : Explanation:-  RF amplifier: There are two important functions of RF amplifier: 1) To increase the strength of weak RF signal. 2) To reject image frequency signal. In FM ... FM broadcast, the maximum modulating frequency is 15 kHz. Hence the audio amplifier must have large bandwidth.

Description : Draw and explain the function of cooling tower in TPS.

Last Answer : Cooling tower in TPS: The function of cooling tower is to reduce the temperature of water coming from condenser. Water is circulated from the basin of the cooling ... cooling Tower temperature of water is reduced either by natural or forced or induced draught method or combine

Description : State the function of super heater of a thermal power plant. 

Last Answer : Function of Super heater: -  Its function is to increase the temperature of steam by absorbing heat from exhausted hot flue gases.

Description : What is the function of an electrical filter ?

Last Answer : Filter separates different components that are mixed together. Electrical filter can separate different frequency components. Electrical filters are the electrical circuits which are use to remove unwanted frequency components from the signal.

Description : List any four wiring accessories and its function. 

Last Answer : Following wiring accessories: 1) Lamp holder: It is the holding accessory. The different types of holders used such as angle holder, batten holder, pendent holder 2) Ceiling Rose: Ceiling rose are of two types: ... etc 9) Switch board, ICDP Main Switch 10) All types of size of VIR & PVC wire

Description : State function of starter and ELCB. (Earth Leakage Circuit Breaker)

Last Answer : i) Function of Starter:- 1. To prevent the high starting current OR to minimize the starting current. 2. To give supply failure protection 3. To give over load and short circuit protection ... an installation and cut off the circuit from power supply and avoid electrical shock to the person.

Description : State function of Busbar and which material is used for busbar?

Last Answer : Function of Busbar Bus-bar: - Distribute the load on 3-phase four wire systems. To provide number of connection of incoming line and to provide easy way to connect number of sub circuit. ... to the element. This element means busbar Material is used for busbar: 1. Copper 2. Alluminium

Description : State function of i) Ceiling rose ii) Conduit 

Last Answer : Function of Ceiling rose: Output connection for ceiling fan or tube.  Function of Conduit – To run the wires from switch board to appliances. 

Description : State the function of cooling tower and condenser in thermal power station.

Last Answer : 1. Condenser:   Function of condenser is to convert exhaust steam again into water by reducing its temperature with the help of cold water. Also it reduces back pressure of steam turbine 2 ... tower : The function of cooling tower is to reduce the temperature of water coming from condenser.

Description : State the function of superheater and economizer.

Last Answer : Function of Superheater : The steam produced in the boiler is not dry but contains some moisture. Such wet steam can damage/corrode and reduce the efficiency of the plant. Hence before supplying ... the temperature of feed water to the boiler, so that efficiency of overall system is increased.

Description : State the location and function of i) Economizer ii) Feed water heater.

Last Answer : (i) Economizer:-  Location: - It is placed in the path of flue gases in between the exit from the furnace and the chimney. OR In The way of feed water before boiler. Function: - ... economizer. Function: - Its function is to increase the temperature of feed water by using blade steam.

Description : Write function of control rods in nuclear power plant.

Last Answer : Function of control rods in nuclear power plant: The function of control rod is to control the chain reaction in reactor core by adjusting its height.

Description : What is penstock? What is its function?

Last Answer : What is Penstock:- The penstock is the long pipe line. It consists of heavy duty steel pipe.  Function of Penstock:- Function of penstock is to carry water from the water intake (reservoir) to turbine.

Description : List any four applications of function generator.

Last Answer : Applications of function generator: 1. To test the bandwidth of audio frequency amplifier. 2. Used for troubleshooting of different analog and digital circuits. 3. Acts as source for alignment of receivers 4. For generation of different waves.

Description : State the function of former and control spring in PMMC instrument.

Last Answer : Function of Former: To support the coil and provide eddy current damping.  Function of Control Spring: To provide control torque or force and in some instruments springs can be used as current leads.

Description : Draw a labeled block diagram of sine wave generator and state function of each block. 

Last Answer : Function Generator:  This instrument can deliver sine, triangular & square waves with frequency range of 0.01 Hz to 100 kHz.  The frequency control network is governed by a frequency ... voltage reaches a predetermined level on the negative slope of the integrator's output voltage.

Description : Name the different torque and their function in measuring instrument.

Last Answer : List of torques in analog instruments:  1. Deflecting torque  2. Controlling / restraining torque.  3. Damping torque.  1. Deflecting torque:  - To create deflection of pointer ... .  - Bring the pointer to standstill quickly.  - To minimize oscillations about final position. 

Description : State the function of controlling torque in electrical measuring instrument.

Last Answer : Function of controlling torque  1. The function is to opposes the deflection force and increases with the increase in the deflection of the moving system, to limit its movement. 2. and brought ... set a position where the two opposing forces i.e. deflection and controlling forces are equal. 

Description : State the function of controlling torque. Write two types of it.

Last Answer : Function of Controlling Torque:  To restrict the motion of pointer / spindle and stop the pointer at the relevant position to get correct reading.  To bring back pointer to zero ... measurement is removed.  Types of Controlling Torque: 1. Spring control method 2.Gravity control method 

Description : Draw block diagram of function generator. Write applications of function generator.

Last Answer : Applications of Function Generator: 1. To test the bandwidth of audio frequency amplifier 2. It can produce sine wave, triangle wave, saw tooth wave, even arbitrary waveform. 3. ... for troubleshooting of different analog and digital circuits 7. Acts as source for alignment of receivers.

Description : Draw block diagram of microprocessor and state the function of each block.

Last Answer : Registers: The 8085 includes six registers, one accumulator, and one flag register, as shown in Figure. In addition, it has two 16-bit registers: the stack pointer and the program counter. The 8085 ... , Subtraction, Increment, Decrement etc.  Logic Operations: AND, OR, X-OR, Complement etc.

Description : What does double integration of a unit step function lead to? A) A doublet B) A ramp C) An impulse D) A parabola 

Last Answer : What does double integration of a unit step function lead to? A) A doublet B) A ramp C) An impulse D) A parabola 

Description : The function of steel wire in ACSR conductors is (A) To take care of surges. (B) To reduce corona. (C) To reduce inductance. (D) To provide additional mechanical strength

Last Answer : The function of steel wire in ACSR conductors is To provide additional mechanical strength

Description : A transfer function has a second order denominator and constant gain in the numerator

Last Answer : A transfer function has a second order denominator and constant gain in the numerator the system has two zeros at infinity

Description : The function of a brush and commutator arrangement in a dc motor is to  (1) produce unidirectional torque (2) produce unidirectional current in the armature (3) help in changing the direction of rotation of the armature (4) reduce sparking

Last Answer : The function of a brush and commutator arrangement in a dc motor is to produce unidirectional torque

Description : The function of a surge tank is to  (1) produce surge in the pipeline (2) relieve water hammer pressure in the penstock (3) supply water at constant pressure (4) none of above

Last Answer : The function of a surge tank is to relieve water hammer pressure in the penstock

Description : With the knowledge of the state variable representation of a plant the transfer function of the plant 

Last Answer : With the knowledge of the state variable representation of a plant the transfer function of the plant can be determined completely

Description : Insulating materials have the function of?

Last Answer : Insulating materials have the function of preventing an open circuit between the voltage source and the load.

Description : Describe different RT level computational and sequential components used to design single function processors.

Last Answer : RT-level combinational components:- To reduce the complexity in digital logic, combinational components are used, which are more powerful than logic gates.  Such combinational ... during a clock edge. An asynchronous inputs value effects the circuit independent of the clock.

Last Answer : The function of shunt in an ammeter is to by pass the current.

Last Answer : In a capacitor start and run motors the function of the running capacitor in series with the auxiliary winding is to improve power factor.

Last Answer : The main function of a fuse is to prevent excessive currents.

Last Answer : The function of breather in a transformer is to arrest flow of moisture when outside air enters the transformer.

Description : What is the function of induction motor?

Last Answer : while you give supply to motor its motor run on magnet base 

Description : What is the reason for man to be on this planet?

Last Answer : answer:That sounds about right. lol I really have no idea how to answer your question. What happened to your other question?