A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the

A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will
by

1 Answer

Answer :

A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will not change

by

Related questions

A linear network has a current input 4cos(ω t + 20º)A and a voltage output 10 cos(ωt +110º) V. Determine the associated impedance.

Description : A linear network has a current input 4cos(ω t + 20º)A and a voltage output 10 cos(ωt +110º) V. Determine the associated impedance.

Last Answer : Solution

The internal resistances of an ideal current source, and an ideal voltage source are, respectively,

Description : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, (A) 0, ∞ (B) ∞, ∞ (C) ∞, 0 (D) 0,0

Last Answer : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, ∞, 0

An ideal voltage source has?

Description : An ideal voltage source has?

Last Answer : An ideal voltage source has zero internal resistance.

An ideal voltage source should have?

Description : An ideal voltage source should have?

Last Answer : An ideal voltage source should have zero source resistance.

Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage

Description : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Last Answer : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Voltage dependent resistors are used?

Description : Voltage dependent resistors are used?

Last Answer : Voltage dependent resistors are used to supress surges.

Voltage dependent resistors are usually made from?

Description : Voltage dependent resistors are usually made from?

Last Answer : Voltage dependent resistors are usually made from nichrome.

Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Description : Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Last Answer : Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Nodal Analysis with Voltage Sources

Description : Nodal Analysis with Voltage Sources

Last Answer : Nodal Analysis with Voltage Sources

The power flow problem mathematical model for a linear transmission network

Description : The power flow problem mathematical model for a linear transmission network (A) is non-linear (B) is linear (C) considers time variation of generation (D) does not consider tap-changing transformers

Last Answer : The power flow problem mathematical model for a linear transmission network is non-linear

what is ideal voltage source ?

Description : what is ideal voltage source?

Last Answer : every voltage source have their own resistance that is called as internal resistance it is because of the resistance of electrodes and electrolytes in the battery interms of other supplyit have ... in universe it means ideal voltage source is this voltage source having internal resistance zero

A network is said to be under resonance when the voltage and the current at the network input terminals are

Description : A network is said to be under resonance when the voltage and the current at the network input terminals are (A) in phase (B) out of phase (C) in phase quadrature (D) in phase, and have equal magnitudes

Last Answer : A network is said to be under resonance when the voltage and the current at the network input terminals are in phase

The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as?

Description : The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as

Last Answer : The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as non-linear circuit.

When three resistors with unequal values are connected in parallel, _______

Description : When three resistors with unequal values are connected in parallel, _______ A) The current across the resistors is the same  B) The voltage drop across the resistors is the same C) The voltage drops across the resistors is proportional to the resistance of each resistor D) None of these

Last Answer : When three resistors with unequal values are connected in parallel, The voltage drop across the resistors is the same

As a network contains only independent current sources and resistors then if the values of all resistors are

Description : As a network contains only independent current sources and resistors then if the values of all resistors are doubled then the values of the node voltages are   (A) will become half (B) will ... (D) cannot be determined unless the circuit configuration and the values of the resistors are known.

Last Answer : As a network contains only independent current sources and resistors then if the values of all resistors are doubled then the values of the node voltages are will become double 

A network that consists of at least a voltage source or current source is called

Description : A network that consists of at least a voltage source or current source is called A) Active network B) Ideal network C) Sourced network D) Outsourced network

Last Answer : A network that consists of at least a voltage source or current source is called Active network

Three identical resistors are first connected in parallel and then in series...

Description : Three identical resistors are first connected in parallel and then in series. The resultant resistance of the first combination to the second will be?

Last Answer : Three identical resistors are first connected in parallel and then in series. The resultant resistance of the first combination to the second will be 1/9 times.

Linear Algebra Problem The product of eigen values of the matrix

Description : Linear Algebra Problem The product of eigen values of the matrix

Last Answer : Linear Algebra Problem The product of eigen values of the matrixhttps://youtu.be/JGcynUZFQ78

what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel

Description : what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel

Last Answer : equivalent resistance

State any two features of carbon composition resistors.

Description : State any two features of carbon composition resistors.

Last Answer : Features of Carbon composition resistance: i) Low cost ii) Wide resistance range ( ohm to mega ohm) iii) Wide range of working voltage iv) Simple in construction 

The colour band on the extreme left in general purpose fixed resistors represents:

Description : The colour band on the extreme left in general purpose fixed resistors represents: A) Tolerance B) First significant digit C) Wattage Rating D) Voltage Rating

Last Answer : The colour band on the extreme left in general purpose fixed resistors represents: First significant digit

Three identical resistors connected in star consume 5000 W. If the resistors are connected in

Description : Three identical resistors connected in star consume 5000 W. If the resistors are connected in delta across the same supply, the power consumed will be

Last Answer : Three identical resistors connected in star consume 5000 W. If the resistors are connected in delta across the same supply, the power consumed will be 15000 W

What is the total resistance if 5 resistors of 20 Ω each are connected in series?

Description : What is the total resistance if 5 resistors of 20 Ω each are connected in series? A) 100 Ω B) 4 Ω C) 20 Ω D) None of these

Last Answer : What is the total resistance if 5 resistors of 20 Ω each are connected in series? A) 100 Ω B) 4 Ω C) 20 Ω D) None of these

Consider a circuit with four 10 Ω resistors connected in parallel and the current flowing through the circuit is

Description : Consider a circuit with four 10 Ω resistors connected in parallel and the current flowing through the circuit is 5 A. What will be the current if the above 4 resistors are connected in parallel? A) 5 A B) 50 A C) 500 A D) None of these

Last Answer : Consider a circuit with four 10 Ω resistors connected in parallel and the current flowing through the circuit is 5 A. What will be the current if the above 4 resistors are connected in parallel? A) 5 A B) 50 A C) 500 A D) None of these

Two resistors are said to be connected in series when?

Description : Two resistors are said to be connected in series when?

Last Answer : Two resistors are said to be connected in series when same current passes in turn through both.

Wire-wound resistors are unsuitable for use at high frequencies because they?

Description : Wire-wound resistors are unsuitable for use at high frequencies because they?

Last Answer : Wire-wound resistors are unsuitable for use at high frequencies because they exhibit unwanted inductive and capacitive effects.

List any four sources of energy.

Description : List any four sources of energy. 

Last Answer : List of sources of energy:-  1. Hydro energy (P.E. of water)  2. Nuclear energy (Heat is produced by fission processes of U235)  3. Fossil fuels:  i) Thermal energy (by combustion of coal) ... -65 % in volume) and carbon dioxide  7. Fuel Cells (hydrogen)  b) Name any two thermal power

Compare conventional energy sources with renewable energy sources on any four points.

Description : Compare conventional energy sources with renewable energy sources on any four points. 

Last Answer : Points Conventional Energy Sources Renewable Energy Sources Availability Limited Unlimited Cost of Fuel High depending on fuel.  Negligible Amount of Power generated On large scale due ... should be selected at source For example HPP, TPP, NPP SPP and WPP

What is the difference between renewable and nonrenewable energy sources?

Description : What is the difference between renewable and nonrenewable energy sources?

Last Answer : Renewable energy sources are non-perishable, and Non-renewable energy sources are perishable sources. Non-Renewable energy sources are like  coal, oil,nuclear fuel etc. Renewable energy sources are :- wind, solar, tidal, Geo thermal etc.

What are the different sources of renewable energy?

Description : What are the different sources of renewable energy?

Last Answer : Solar Wind Tidal Geothermal

A non-linear network does not satisfy?

Description : A non-linear network does not satisfy?

Last Answer : A non-linear network does not satisfy both homogeneity as well as superposition condition.

A passive network is one which contains?

Description : A passive network is one which contains?

Last Answer : A passive network is one which contains no source of e.m.f. in it.

A network which contains one or more than one source of e.m.f. is known as?

Description : A network which contains one or more than one source of e.m.f. is known as?

Last Answer : Active 

The gain of an ideal amplifier must be

Description : The gain of an ideal amplifier must be

Last Answer : The gain of an ideal amplifier must be infinity

An ideal traction system should have?

Last Answer : An ideal traction system should have easy speed control, high starting tractive effort, equipment capable of with standing large temporary loads.

For any type of consumer the ideal tariff is?

Last Answer : For any type of consumer the ideal tariff is three part tariff.

An ideal transformer is one which has?

Last Answer : An ideal transformer is one which has no losses and magnetic leakage.

An ideal transformer will have maximum efficiency at a load such that?

Last Answer : An ideal transformer will have maximum efficiency at a load such that copper loss equal to iron loss.

What should be the ideal resistance of ammeter ?

Description : What should be the ideal resistance of ammeter ?

Last Answer : Ideal resistance of ammeter should be zero.

What are the desirable characteristics of ideal switch?

Description : What are the desirable characteristics of ideal switch?

Last Answer : Desirable characteristics of the ideal switch: It is desirable to have power switches characteristics closer to ideal switch. The ideal switch should have the following characteristics. Zero resistance when ... . 100% efficiency. Able to control power flow with zero power dissipation.

What are ‘Linear actuators’ ? State applications.

Description : What are ‘Linear actuators’ ? State applications.

Last Answer : What are ‘Linear actuators’ ? State applications.

Linear algebra problem: Rank of a matrix

Description : Linear algebra problem: Rank of a matrix

Last Answer : Linear algebra problem: Rank of a matrix https://youtu.be/b7tPLA3_y6Y

Linear algebra problem: The determinant of the matrix

Description : Linear algebra problem: The determinant of the matrix

Last Answer : Answer : Linear algebra problem: The determinant of the matrix

Linear Algebra Problem the solution to the system of equations

Description : Linear Algebra Problem the solution to the system of equations

Last Answer : Linear Algebra Problem the solution to the system of equations https://youtu.be/y_FlupirxZM

Linear Algebra Problem 2

Description : Linear Algebra Problem 2

Last Answer : https://youtu.be/zAPDYO0q-9w Linear Algebra Problem 2

Linear and non-linear device

Description : Linear and non-linear device

Last Answer : Linear and non-linear device

A system is linear if and only if it satisfies

Description : A system is linear if and only if it satisfies

Last Answer : A system is linear if and only if it satisfies principle of superposition and principle of homogeneity

Which of the following converts linear displacement from a mechanical reference into a proportional

Description : Which of the following converts linear displacement from a mechanical reference into a proportional electrical signal containing phase and amplitude information? A) CRO B) LVDT C) RVDT D) None of these

Last Answer : Which of the following converts linear displacement from a mechanical reference into a proportional electrical signal containing phase and amplitude information? A) CRO B) LVDT C) RVDT D) None of these

What are the disadvantages of linear regulator ?

Description : What are the disadvantages of the linear regulator? how are they overcome in the switching regulator? What is continuous and discontinuous mode switching regulator?

Last Answer : Disadvantages of the linear regulator: Linear regulator waste power in the form of heat. Linear regulator has very low efficiency. Linear regulator cannot be used for the step ... between continuous mode and discontinuous mode switching regulator.