Unit commitment is a procedure in which : 

(A) Scheduling of total generation is done economically 

(B) Optimal combination of units in a system is chosen at any given time 

(C) Most efficient machines are selected for financial economy 

(D) Most efficient machines are selected for minimum reactive power loss

1 Answer

Answer :

Unit commitment is a procedure in which : Optimal combination of units in a system is chosen at any given time 

Related questions

Description : Should I continue this arrangement?

Last Answer : It sounds like she appreciates what you do for her, you are a part of her life while she is unable to go out. Is she declining in health? it might be a good task for you for variety.

Description : The unit of speed regulation of a governor is :  (A) Hz (B) Hz/MW (C) Hz/MVA (D) rpm/MVAR

Last Answer : The unit of speed regulation of a governor is : Hz/MW

Description : How to Install a Home HVAC Unit

Last Answer : How to Install a Home HVAC Unit Installing a two zone home heating, ventilating and air-conditioning (HVAC) system is not for a casual do-it-yourselfer but most aspects of the system past ... have oriented their wire coloring system. It should be done carefully to prevent any possibility of harm.

Description : Define resistivity. State its unit.

Last Answer : Resistivity can be defined as the resistance of a conducting material per unit length with unit area of cross section. Its unit is ohm/meter

Description : What is the smallest unit of a compound with the same chemical characteristics?

Last Answer : The molecule is the smallest unit of a compound with the same chemical characteristics.

Description : A) Watt B) Volts C) Farad D) Ampere

Last Answer : Correct answer: D) Ampere

Description : Options: A) WATT B) AMPERE C) VOLTS D) OHM

Last Answer : Correct Answer: A) WATT

Description : THE UNIT OF RELUCTANCE IS

Last Answer : The si unit of reluctance is Ampere-turn/weber

Description : Define the following terms related to tariff: (i) Connected load (ii) Unit consumed (iii) Fixed charges (iv) Electricity Tax 

Last Answer : (i) Connected load  It is the sum of the power ratings (Watts or kW or MW) of all devices and machines existing (installed) in the premises of consumer. It is used to decide the ... a percentage of the total electricity bill which includes all amounts that go to the electricity supply agency. 

Description : Write the purpose of coal and ash handling unit. Also write different activities that arc carried out in this unit.

Last Answer : Purpose of coal and ash handling unit :-  To transport coal from coal storage to power plant. A large quantity of ash about 10 to 30 % produced in furnace, the removal of ash from boiler furnace ... disposed off.  Various methods of disposal of ash:  Mechanical system.  Pneumatic system.

Description : Define admittance and state its unit.

Last Answer : Admittance is defined as the ability of the circuit to carry (admit) alternating current through it.  OR  It is the reciprocal of impedance Z. i.e Admittance Y = 1/Z.  Unit: Its unit is siemen (S) or mho (Ʊ).

Description : What is the SI unit of conductivity ?

Last Answer : The SI unit of conductivity Siemens/m.

Description : What does double integration of a unit step function lead to? A) A doublet B) A ramp C) An impulse D) A parabola 

Last Answer : What does double integration of a unit step function lead to? A) A doublet B) A ramp C) An impulse D) A parabola 

Description : Which unit holds data permanently?  (A) Input unit (B) Secondary storage unit (C) Output Unit (D) Primary Memory Unit

Last Answer : Which unit holds data permanently?  (A) Input unit (B) Secondary storage unit (C) Output Unit (D) Primary Memory Unit

Description : Which of the following are components of Central Processing Unit (CPU)?  (A) Arithmetic logic unit, Mouse  (B) Arithmetic logic unit, Control unit  (C) Arithmetic logic unit, Integrated Circuits  (D) Control Unit, Monitor

Last Answer : Which of the following are components of Central Processing Unit (CPU)?  (A) Arithmetic logic unit, Mouse  (B) Arithmetic logic unit, Control unit  (C) Arithmetic logic unit, Integrated Circuits  (D) Control Unit, Monitor

Description : A control system having unit damping factor will give  (1) Oscillatory response (2) Undamped response (3) Critically damped response (4) No response

Last Answer : 1

Description : The unit heat rate characteristic of a thermal power unit shows :  (A) Heat input per kWh of output versus the megawatt output of unit  (B) Heat input per kW of output versus the megawatt output ... hour output of unit  (D) Heat input per kW of output versus the megawatt hour output of unit

Last Answer : The unit heat rate characteristic of a thermal power unit shows : Heat input per kWh of output versus the megawatt output of unit 

Description : Which of the following is the SI unit for admittance? A) Ohm B) Henry C) Farad D) Siemens

Last Answer : Which of the following is the SI unit for admittance? A) Ohm B) Henry C) Farad D) Siemens

Description : Which of the following is an example of SI derived unit? A) Capacitance (Farad) B) Time (second) C) Luminous intensity (Candela) D) All the above

Last Answer : Which of the following is an example of SI derived unit? A) Capacitance (Farad) B) Time (second) C) Luminous intensity (Candela) D) All the above

Description : Which of the following is a unit of magnetic flux? A) Weber B) Maxwell C) Both A and B D) None of these

Last Answer : Which of the following is a unit of magnetic flux? A) Weber B) Maxwell C) Both A and B D) None of these

Description : What is the SI unit for magnetic reluctance? A) Ampere B) Ampere-turns per weber C) Henry D) None of these

Last Answer : What is the SI unit for magnetic reluctance? A) Ampere B) Ampere-turns per weber C) Henry D) None of these

Description : A second order system shows 100% overshoot in its unit step response. It can be categorized as (A) underdamped system. (B) overdamped system. (C) Critically damped system. (D) undamped system.

Last Answer : A second order system shows 100% overshoot in its unit step response. It can be categorized as undamped system.

Description : The unit circle of the Nyquist plot transforms into unity or 0 dB line of the amplitude plot of the Bode diagram for

Last Answer : The unit circle of the Nyquist plot transforms into unity or 0 dB line of the amplitude plot of the Bode diagram for all frequencies

Description : The unit of retentivity is?

Last Answer : The unit of retentivity is weber/sq. m.

Description : The unit of magnetic flux is?

Last Answer : The unit of magnetic flux is weber.

Description : The unit of power in S.I. units is

Last Answer : The unit of power in S.I. units is watt.

Description : The unit of work or energy in S.I. units is

Last Answer : The unit of work or energy in S.I. units is joule.

Description : The unit of force in S.I. units is

Last Answer : The unit of force in S.I. units is Newton.

Description : What is the unit of measure for voltage?

Last Answer : Voltage measured in volts.

Description : How much is 1 unit of electricity?

Last Answer : 1 unit of electricity is equal to 1 kWh.

Description : What is the unit of reactance?

Last Answer : Unit of reactance is Ohms ( Ω ) .Reactance is denoted by X .

Last Answer : Flux density is denoted by B. And it is given as B = flux/ area Where, the unit of flux is Weber and unit of area is meter square. So the unit of flux density is weber per meter square which is also called as Tesla.

Description : Joule X second is the unit of?

Last Answer : Joule X second is the unit of power .

Last Answer : Unit of power is Watt denoted by capital W .

Last Answer : Unit of voltage is volt denoted by capital V .

Last Answer : Unit of resistance is Ohm.

Last Answer : Unit of work is Joule denoted by capital J .

Last Answer : Unit of frequency is herzt

Last Answer : Unit of inductance is Henry denoted by capital H .

Description : What are the SI derived units?

Last Answer : Electrical capacitance, electrical resistance, electrical inductance, force, energy, power, magnetic flux, electric charge, and electric potential difference and EMF. These are the nine SI derived units.

Last Answer : Generation cost low and power production high.the power production is trasnmission loss is low level and cheap generator on the genarator to genarate power not required the high genarator on the transmission losses is low select the genarator.

Description : Which one of the following best describes users? a. Providers of both strategic and tactical direction to the project. b. Those intended to receive benefits or operate outputs. c. Facilitators of an appropriate issue resolution procedure. d. Those providing full-time commitment to the project.

Last Answer : b. Those intended to receive benefits or operate outputs.

Description : Which one of the following best describes users?  a. Providers of both strategic and tactical direction to the project.  b. Those intended to receive benefits or operate outputs.  c. ... of an appropriate issue resolution procedure.  d. Those providing full-time commitment to the project.

Last Answer : b. Those intended to receive benefits or operate outputs.

Description : Point out the wrong statement. a) Taken as a unit, Request => Process => Response is not an atomic transaction b) A coherent transaction either succeeds and is enacted, or ... transaction commitment in a multiuser application, durability requires correcting the condition d) None of the mentioned

Last Answer : Taken as a unit, “Request => Process => Response” is not an atomic transaction

Description : A 20-MVA, 6.6-kV, 3-phase alternator is connected to a 3-phase transmission line. The per unit positive-sequence, negative-sequence and zero-sequence impedances of the alternator are j0.1, j0.1 and j0.04 respectively. The neutral of ... the fault is  (A) 513.8 V (B) 889.9 V (C) 1112.0 V (D) 642.2 V

Last Answer : A 20-MVA, 6.6-kV, 3-phase alternator is connected to a 3-phase transmission line. The per unit positive-sequence, negative-sequence and zero-sequence impedances of the alternator are j0.1, ... line. The voltage of the alternator neutral with respect to ground during the fault is 642.2 V

Description : The per unit impedance ofa circuit element is 0.15. If the base kV and base MVA are halved, then the new value of the per unit impedance of the circuit element will be?

Last Answer : The per unit impedance ofa circuit element is 0.15. If the base kV and base MVA are halved, then the new value of the per unit impedance of the circuit element will be 0.30.

Description : For those not yet snared, how do you evade the "trap" of commitment?

Last Answer : Dogs only live for about a decade.

Description : How much of a babysitting commitment do you think this message would be asking of you (details inside)

Last Answer : I would have phrased the message “Can you and Dad watch the girls overnight?” not “one night”. The latter is far too open-ended (evening? late evening? close to midnight?)

Description : Will you make a commitment to support performing arts today?

Last Answer : I’m spending a big chunk of change to see Roger Waters perform The Wall. Does that count?

Description : Isn't the president's military commitment to Australia simply an admission of defeat in the Middle East?

Last Answer : What would constitute a “victory” in the middle east?