Which of the following is true for a bus impedance matrix ?

Which of the following is true for a bus impedance matrix ? 

(A) It is sparse 

(B) It has diagonally dominant elements 

(C) It is the inverse of the bus admittance matrix 

(D) Each element of it is the reciprocal of the corresponding element in admittance matrix
by

1 Answer

Answer :

Which of the following is true for a bus impedance matrix ? 

(A) It is sparse 

(B) It has diagonally dominant elements 

(C) It is the inverse of the bus admittance matrix 

(D) Each element of it is the reciprocal of the corresponding element in admittance matrix

by

Related questions

A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of

Description : A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of

Last Answer : A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of 0.02 P.U

For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is

Description : For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is

Last Answer : For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is 25 x 25

Define impedance diagram and reactance diagram.

Description : Define impedance diagram and reactance diagram.

Last Answer : Impedance diagram: Impedance diagram is the simplified equivalent circuits of single line or one line diagrams of power system in which all components are represented by their equivalent circuit.  ... machines are neglected and is used only for fault current calculation is called reactance diagram.

A linear network has a current input 4cos(ω t + 20º)A and a voltage output 10 cos(ωt +110º) V. Determine the associated impedance.

Description : A linear network has a current input 4cos(ω t + 20º)A and a voltage output 10 cos(ωt +110º) V. Determine the associated impedance.

Last Answer : Solution

Give the effect of source impedance on converter operation.

Description : Give the effect of source impedance on converter operation.

Last Answer : Effect of source impedance on converter operation: For single-phase fully controlled bridge converter, the SCRs are triggered in pairs alternately. During positive half-cycle of input, SCRs T1 and T2 are triggered ... increases and as a consequence, the output dc voltage decreases. 

Impedance ratio

Description : Impedance ratio

Last Answer : Impedance ratio

How to find total impedance Z, current I and Impedance angle ?

Description : How to find total impedance Z, current I and Impedance angle ?

Last Answer : How to find total impedance Z, current I and Impedance angle ?

A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient?

Description : A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9 

Last Answer : A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9 

An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to

Description :  An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to a load impedance ZL when A) ZL = R B) ZL = jXS C) ZL = R-jXS D) ZL = R+jXS 

Last Answer :  An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to a load impedance ZL when ZL = R-jXS

The rotor impedance of a slip ring induction motor is (0.1 + j0.6)Ohm/ ph . The resistance/ph to be inserted

Description : The rotor impedance of a slip ring induction motor is (0.1 + j0.6)Ohm/ ph . The resistance/ph to be inserted into rotor to get maximum torque at starting should be

Last Answer : The rotor impedance of a slip ring induction motor is (0.1 + j0.6)Ohm/ ph . The resistance/ph to be inserted into rotor to get maximum torque at starting should be 0.5 Ohm

The surge impedance for over head line is taken as

Description : The surge impedance for over head line is taken as  (1) 10-20 ohms (2) 50-60 ohms (3) 100-200 ohms (4) 1000-2000 ohms

Last Answer : The surge impedance for over head line is taken as 100-200 ohms

In a series resonant circuit, the impedance of the circuit is?

Description : In a series resonant circuit, the impedance of the circuit is?

Last Answer : In a series resonant circuit, the impedance of the circuit is minimum.

Is the input impedance of MOSFET more than BJT and FET?

Description : Is the input impedance of MOSFET more than BJT and FET?

Last Answer : Yes, the input impedance of MOSFET more than BJT and FET.

Is it loitering to read a novel on a bus all day if you also have a monthly unlimited bus pass?

Description : Is it loitering to read a novel on a bus all day if you also have a monthly unlimited bus pass?

Last Answer : Unless there's a rule against it, I think it's allowed to sit on the bus reading all day, if you have an unlimited bus pass. Riding the bus for fun and exploration is also allowed with a pass. ... a nice library instead. Personally, I tend to get motion sick when I read too much in a moving vehicle.

Have you ever taken the greyhound bus?

Description : Have you ever taken the greyhound bus?

Last Answer : They don’t have toilet paper and water to wash your hands with. bring your own toilet paper and hand sanitizer. Bring a sweater or small pillow.

How do bus drivers close the door when they get off the bus?

Description : How do bus drivers close the door when they get off the bus?

Last Answer : You can push them shut from the outside. It doesn’t really take much effort. I ride the bus a lot and see the drivers do it all the time.

What Is Meant By A Bus?

Description : What Is Meant By A Bus?

Last Answer : Answer :A bus is a group of conducting lines that carriers data, address, & control signals.

Bus Travel with Children

Description : Bus Travel with Children

Last Answer : Taking a long bus journey with children in tow can be challenging, but with some planning, you and your child can enjoy a bus ride with a minimum of fuss and muss. When planning your trip, try ... an opportunity to spend quality time with your little ones, and they will enjoy the trip all the more.

Bus Travel Tips

Description : Bus Travel Tips

Last Answer : There's something "zen" about long bus trips; being an anonymous face in the sea of travelers, being away from all the stresses and distractions of your every day life, losing yourself in a good ... when doing so. Remember when re-boarding that seats are still on a first-come-first-serve basis.

What are the components of system bus?

Description : What are the components of system bus? A) CPU Bus, Address Bus, Data Bus B) Memory, Control Unit, ALU C) Data Bus, Address Bus, Control Bus D) Register, PC, IR

Last Answer : What are the components of system bus? A) CPU Bus, Address Bus, Data Bus B) Memory, Control Unit, ALU C) Data Bus, Address Bus, Control Bus D) Register, PC, IR

Calculate the size of memory address space for a 16 bit data and 20 bit address bus.

Description : Calculate the size of memory address space for a 16 bit data and 20 bit address bus. A) 1 MB B) 2 MB C) 3 MB D) 4 MB

Last Answer : Calculate the size of memory address space for a 16 bit data and 20 bit address bus. A) 1 MB B) 2 MB C) 3 MB D) 4 MB

In load flow Study, a PV bus is treated as a PQ bus when

Description : In load flow Study, a PV bus is treated as a PQ bus when

Last Answer : Voltage at the bus becomes high 

Generating capacity connected to the bus bars and ready to take load when switched on is known as ?

Last Answer : Generating capacity connected to the bus bars and ready to take load when switched on is known as spinning reserve.

Have you ever experienced a 'glitch in the Matrix'?

Description : Have you ever experienced a 'glitch in the Matrix'?

Last Answer : Yes… I will have deja vu but realize that the event is unfolding in an ever-so-slightly different way. Since reading The Number of the Beast by Heinlein I always think of it as a rewrite.

Matrix problem 5

Description : Matrix problem 5

Last Answer : Matrix problem 5

matrix problem 4

Description : matrix problem 4

Last Answer : matrix problem 4

Square of matrix problem

Description : Square of matrix problem

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

2x2 matrix problem 2

Description : 2x2 matrix problem 2

Last Answer : 2x2 matrix problem 2

2x2 matrix problem

Description : 2x2 matrix problem

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

3X3 inverse of matrix short trick

Description : 3X3 inverse of matrix short trick

Last Answer : 3X3 inverse of matrix short trick

The necessary condition to diagonalise a matrix is that (A) its all Eigen values should be distinct. (B) its Eigen vectors should be independent. (C) its Eigen values should be real. (D) the matrix is non-singular.

Description : The necessary condition to diagonalise a matrix is that   (A) its all Eigen values should be distinct.   (B) its Eigen vectors should be independent.   (C) its Eigen values should be real.   (D) the matrix is non-singular. 

Last Answer : The necessary condition to diagonalise a matrix is that  (A) its all Eigen values should be distinct.  (B) its Eigen vectors should be independent.  (C) its Eigen values should be real.  (D) the matrix is non-singular. 

For a singular matrix (A) at least one Eigen value would be at the origin. (B) all Eigen values would be at the origin. (C) no Eigen value would be at the origin. (D) none.

Description : For a singular matrix   (A) at least one Eigen value would be at the origin.   (B) all Eigen values would be at the origin.   (C) no Eigen value would be at the origin.   (D) none. 

Last Answer : For a singular matrix at least one Eigen value would be at the origin.

2000 The rank of matrix is

Description : 2000 The rank of matrix is

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

The Matrix has Complex eigenvalues and vectors

Description : The Matrix has Complex eigenvalues and vectors

Last Answer : The Matrix has Complex eigenvalues and vectors

For the given orthogonal Matrix, the inverse is,

Description : For the given orthogonal Matrix, the inverse is,

Last Answer : For the given orthogonal Matrix, the inverse is,

Linear algebra problem: Rank of a matrix

Description : Linear algebra problem: Rank of a matrix

Last Answer : Linear algebra problem: Rank of a matrix https://youtu.be/b7tPLA3_y6Y

Linear algebra problem: The determinant of the matrix

Description : Linear algebra problem: The determinant of the matrix

Last Answer : Answer : Linear algebra problem: The determinant of the matrix

The lowest eigenvalue of the 2x2 matrix

Description : The lowest eigenvalue of the 2x2 matrix 

Last Answer : Linear Algebra Problem The lowest eigenvalue of the 2x2 matrix https://youtu.be/QatcRTzF7EA

The determinant of a 2 x 2 matrix is 50. If one eigen value of the matrix is 10, the other eigen value is ________.

Description : The determinant of a 2 x 2 matrix is 50. If one eigen value of the matrix is 10, the other eigen value is ________.

Last Answer : https://youtu.be/1WrgXbDX1K4

Linear Algebra Problem The product of eigen values of the matrix

Description : Linear Algebra Problem The product of eigen values of the matrix

Last Answer : Linear Algebra Problem The product of eigen values of the matrixhttps://youtu.be/JGcynUZFQ78

The diagonal elements of a nodal admittance matrix are strengthened by adding :

Description : The diagonal elements of a nodal admittance matrix are strengthened by adding :  (A) Shunt capacitors (C) Generators (B) Shunt inductances (D) Resistive loads

Last Answer : A

why do buses have those gigantic steering wheels?

Description : why do buses have those gigantic steering wheels?

Last Answer : big wheel gives more leverage via the steering linkage. If you watch the driver she moves the steering wheel very slightly while driving straight. When making a corner, even with power steering ... position. It also has something to do with ergonomics, semi tractor steering wheels are large also.

An A.C. voltage is impressed across a pure resistance of 3.5 ohms in parallel...

Description : An A.C. voltage is impressed across a pure resistance of 3.5 ohms in parallel with a pure inductance of impedance of 3.5 ohms?

Last Answer : An A.C. voltage is impressed across a pure resistance of 3.5 ohms in parallel with a pure inductance of impedance of 3.5 ohms, both resistance and inductance carry equal currents.

Write the four ways of adding an impedance to an existing system so as to modify bus impedance matrix.

Description : Write the four ways of adding an impedance to an existing system so as to modify bus impedance matrix.

Last Answer : 1. Adding a branch of impedanceZb from a new bus p to the referance bus. 2. Adding a branch of impedance Zb from a new busp to an existing bus. 3. Adding a branch of impedance Zb from an existing busq to the referance bus. 4. Adding a branch of impedance Zb between two existing buses h and q.

What are the methods available for forming bus impedance matrix.

Description : What are the methods available for forming bus impedance matrix.

Last Answer : 1. Form the bus impedance matrix and then take its inverse to get bus impedance matrix. 2. Directly form the bus impedance matrix from the reactance diagram. This method utilizes the techniques of modifications of existing bus impedance matrix due to addition of new bus.

Name the diagonal elements and off diagonal elements of bus impedance matrix.

Description : Name the diagonal elements and off diagonal elements of bus impedance matrix.

Last Answer : The diagonal elements of bus impedance matrix are called driving point impedances of the buses and off diagonal elements of bus impedance matrix are called transfer impedances of the buses.

What technique is used to solve load flow problems using Z-bus (Bus impedance matrix)?

Description : What technique is used to solve load flow problems using Z-bus (Bus impedance matrix)?

Last Answer : The formulation of load flow problem using Zbus employs Diakoptics techniques which is actually the piecewise solution of the power system problem by using tearing off technique.

A 10 km long line has a characteristic impedance of 400 ohms. If line length is 100 km, the characteristic

Description : A 10 km long line has a characteristic impedance of 400 ohms. If line length is 100 km, the characteristic impedance is: (1) 4000 Ω (2) 400 Ω (3) 40 Ω (4) 4 Ω

Last Answer : A 10 km long line has a characteristic impedance of 400 ohms. If line length is 100 km, the characteristic impedance is: 400 Ω

The input impedance of a short circuited loss less transmission line of characteristic impedance 50 Ohm is

Description : The input impedance of a short circuited loss less transmission line of characteristic impedance 50 Ohm is

Last Answer : Capacitive

The purpose of a short circuit forcing module (short time trip) installed in a branch line is to provide ____________. A. high speed clearance of low impedance short circuits in the branch B. continuity of service on main bus under short circuit conditions in a branch C. isolation of short circuits by selective tripping of branch circuit breakers D. all of the above

Description : The purpose of a short circuit forcing module (short time trip) installed in a branch line is to provide ____________. A. high speed clearance of low impedance short circuits in the branch B. ... C. isolation of short circuits by selective tripping of branch circuit breakers D. all of the above

Last Answer : Answer: D