For measurement of radio frequency ac signals __________ type meter is used

For measurement of radio frequency ac signals __________ type meter is used
by

1 Answer

Answer :

For measurement of radio frequency ac signals thermo-couple type meter is used

by

Related questions

Draw the diagram and explain the working of ferrodynamic type frequency meter.

Description : Draw the diagram and explain the working of ferrodynamic type frequency meter. 

Last Answer : Ferrodynamic type frequency meter: (Electrical resonance type frequency meter): It consists of a fixed coil. The supply whose frequency is to be measured is connected across it. This coil ... so selected that the moving coil takes up a convenient position when frequency is of normal value. 

Explain working of Weston type frequency meter.

Description : Explain working of Weston type frequency meter.

Last Answer : Weston Type Frequency Meter: There are two fixed coils marked as A and B. Each coil divided into two equal parts and are fixed such that their magnetic axis are perpendicular to each ... leading to deflections in either direction depending on the currents there in, due to changed impedances.

A Weston frequency meter is?

Last Answer : A Weston frequency meter is moving iron instrument.

In a Weston frequency meter, the magnetic axes of the two fixed coils are?

Last Answer : In a Weston frequency meter, the magnetic axes of the two fixed coils are perpendicular.

In a vibrating reed frequency meter the natural frequencies of two adjacent reeds have a difference of?

Last Answer : In a vibrating reed frequency meter the natural frequencies of two adjacent reeds have a difference of 0.5 Hz.

Describe with working of LCR meter for measurement of inductance.

Description : Describe with working of LCR meter for measurement of inductance. 

Last Answer : working of LCR:- A LCR meter (Inductance (L), Capacitance (C), and Resistance (R) test equipment used to measure the inductance, capacitance and, resistance of a component. It works on the ... in parallel (as would be encountered in measuring a capacitor with a leaky dielectric) [Q setting ] 

An induction type energy meter is found to run fast. Correction for this error can be made by

Description : An induction type energy meter is found to run fast. Correction for this error can be made by  (A) Over-load compensation. (B) Voltage compensation. (C) Moving the brake magnet away from the centre of the disc. (D) Moving the brake magnet towards the centre of the disc.

Last Answer : An induction type energy meter is found to run fast. Correction for this error can be made by Moving the brake magnet away from the centre of the disc.

What type of meter is used to measure current?

Description : What type of meter is used to measure current?

Last Answer : Ammeter

Principal of digital frequency meter.

Description : Principal of digital frequency meter.

Last Answer : The basic block diagram of basic digital frequency meter (DFM) is shown in above figure. The signal whose frequency we have to be measured is first to be amplified through amplifier. The output of amplifier ... = Number of counts. t = Time interval between start and stop condition of the gate.

State the application of phase sequence indicator; clip on ammeter, frequency meter & P.F. meter.

Description : State the application of phase sequence indicator; clip on ammeter, frequency meter & P.F. meter.

Last Answer : Phase Sequence Indicator:  1. For finding correct phase sequence of supply  2. For obtaining exact instant of parallel operation of alternators.  3. For obtaining reversal of rotation ...  4. In electroplating industries   5. In various processes industries for measuring power factor

Describe principle of operation of Doppler type ultrasonic flow meter with diagram.

Description : Describe principle of operation of Doppler type ultrasonic flow meter with diagram. 

Last Answer : Diagram: Working:  The flow meter consists of a crystal transducer mounted outside the pipe in which flow is to be measured. This transducer is a piezoelectric crystal which ... , so the frequency of the reflected wave is shifted to particle velocity, according to Doppler principle.

State the function and shape of following parts used in induction type energy meter: i) Series magnet ii) Shunt magnet iii) Al disc iv) Brake magnet

Description : State the function and shape of following parts used in induction type energy meter: i) Series magnet ii) Shunt magnet iii) Al disc iv) Brake magnet

Last Answer : i) Series magnet: produce flux proportional to current (load current) of circuit and interact in the aluminum disc with flux produced by voltage magnet for torque production. Its shape is like letter U.  ii) ... : brakes the motion of the aluminum disc or slows it down. Its shape is like letter C. 

With a neat sketch explain working of 1 phase dynamometer type power factor meter.

Description : With a neat sketch explain working of 1 phase dynamometer type power factor meter.

Last Answer : Working of 1 phase dynamometer type power factor meter : The current coil is connected in series with load. Two pressure coils marked as A and B are connected across the supply terminals ... becomes stationary and the pointer shows steady deflection corresponding to the power factor of the load. 

Draw a neat sketch of 1-ph induction type energy meter and write operating principle of it.

Description : Draw a neat sketch of 1-ph induction type energy meter and write operating principle of it. 

Last Answer : Operating Principal:- The disc is placed between the two-flux due to pressure coil and flux due to current coil, which will set up torque on the disc which is proportional to power causing the ... is proportional to voltage, the second carries a current coil so its flux is proportional to current.

Why energy meter is integrating type measuring instrument?

Description : Why energy meter is integrating type measuring instrument?

Last Answer : Energy Meter is Integrating Type Measuring Instrument: Energy meter is used for measurement of energy, which is obtained by integration (summation) of power supplied over the particular time duration, hence it the integrating type measuring instrument. 

List any four errors in induction type energy meter. Give method of compensation for each.

Description : List any four errors in induction type energy meter. Give method of compensation for each.

Last Answer : Errors in Induction Type Energy Meter with their Compensation:  1) Error due to friction: This error can be compensated by the additional shading band provided on the shunt electromagnet.  2) Phase ... error: This error can be compensated by providing a flux diverter' to the current magnet. 

Classify Interrupts On The Basis Of Signals. State Their Differences.?

Description : Classify Interrupts On The Basis Of Signals. State Their Differences.?

Last Answer : Answer :On the basis of level the signals can be classified into the following types: Single level interrupts Multi level interrupts The differences between them are as follows: For single the ... multi level it is not necessary. Single level interrupts are much slower than multi level interrupts.

How Can Signals Be Classified For The 8085 Microprocessor?

Description : How Can Signals Be Classified For The 8085 Microprocessor?

Last Answer : Answer :The signals of the 8085 microprocessor based on their functions can be classified into 7 categories namely: Frequency and power signals Address and data buses The control bus Interrupt Signals Serial Input / Output signals DMA signals Reset Signals

Find the phasors corresponding to the following signals

Description : Find the phasors corresponding to the following signals

Last Answer : Find the phasors corresponding to the following signals

Sampling of Analogue Signals

Description : Sampling of Analogue Signals

Last Answer : Sampling of Analogue Signals Sampling means splitting in regular interval to convert it in digital form. Sampling converts continuous signal to discrete signal. Actually the accuracy ... use. Using sampling we can store the analogue data in digital form.

Measurement of a non -electrical quantity involves the following four subsystems:

Description : Measurement of a non -electrical quantity involves the following four subsystems:  a) amplifier block b) display block c) instrumentation block d) transducer block  The correct, sequence in which these block occur is  (1) d,a,c,b (2) d, c, a, b (3) a, c, b, d (4) a, b, c, d

Last Answer : Measurement of a non -electrical quantity involves the following four subsystems:  a) amplifier block b) display block c) instrumentation block d) transducer block  The correct, sequence in which these block occur is d,a,c,b

Accurate measurement of very low resistances is possible with

Description : Accurate measurement of very low resistances is possible with (A) Megger (B) Wheatstone Bridge (C) Kelvin’s Double Bridge (D) Wagner’s Earthing Device

Last Answer : Accurate measurement of very low resistances is possible with Kelvin’s Double Bridge

Commonly used instruments in power system measurement are?

Last Answer : Commonly used instruments in power system measurement are induction.

For measurement of inductance having high value, we should use?

Last Answer : For measurement of inductance having high value, we should use Hay's bridge.

For measurement of mutual inductance we can use?

Last Answer : For measurement of mutual inductance we can use Heaviside bridge.

In a 3-phase power measurement by two wattmeter method, both the wattmeters had identical readings...

Description : In a 3-phase power measurement by two wattmeter method, both the watt meters had identical readings. The power factor of the load was?

Last Answer : In a 3-phase power measurement by two wattmeter method, both the watt meters had identical readings. The power factor of the load was unity.

A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned

Description : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is

Last Answer : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is 200µNm

The meter which does not have any component in it to provide control torque is

Description : The meter which does not have any component in it to provide control torque is (A) Electrodynamometer for current measurement (B) Electrodynamometer for voltage measurement (C) Electrodynamometer for power measurement. (D) Electrodynamometer for power factor measurement.

Last Answer : The meter which does not have any component in it to provide control torque is Electrodynamometer for power factor measurement.

A 200 V, 5 A d.c. energy meter is tested at its marked ratings. The resistance of the pressure circuit is 8000 Ω

Description : A 200 V, 5 A d.c. energy meter is tested at its marked ratings. The resistance of the pressure circuit is 8000 Ω and that of current coil is 0.1 Ω. The power consumed when testing the meter with phantom loading with current circuit excited by a 6 V battery is (A) 2.5 W (B) 5 W (C) 32.5 W (D) 35 W

Last Answer : A 200 V, 5 A d.c. energy meter is tested at its marked ratings. The resistance of the pressure circuit is 8000 Ω and that of current coil is 0.1 Ω. The power consumed when testing the meter with phantom loading with current circuit excited by a 6 V battery is 35 W

In a dynamometer 3-phase power factor meter, the planes of the two moving coils are at?

Last Answer : In a dynamometer 3-phase power factor meter, the planes of the two moving coils are at 120°.

In a single phase power factor meter the phase difference between the currents in the two pressure coils is?

Last Answer : In a single phase power factor meter the phase difference between the currents in the two pressure coils is exactly 90°.

The two pressure coils of a single phase power factor meter have?

Last Answer : The two pressure coils of a single phase power factor meter have the same dimensions and the same number of turns.

A power factor meter has?

Last Answer : A power factor meter has one current circuit and two pressure circuits.

The adjustment of position of shading bands, in an energy meter is done to provide?

Last Answer : The adjustment of position of shading bands, in an energy meter is done to provide friction compensation.

The multiplier and the meter coil in a voltmeter are in?

Last Answer : The multiplier and the meter coil in a voltmeter are in series.

The household energy meter is?

Last Answer : The household energy meter is an integrating instrument.

An induction meter can handle current up to?

Last Answer : An induction meter can handle current up to 100 A.

Two waves have frequency of 500 Hz. One is set at its maximum value whereas the other at zero. The phase

Description : Two waves have frequency of 500 Hz. One is set at its maximum value whereas the other at zero. The phase angle between them will be

Last Answer : Two waves have frequency of 500 Hz. One is set at its maximum value whereas the other at zero. The phase angle between them will be 90o

For measuring current at high frequency we should use?

Last Answer : For measuring current at high frequency we should use thermocouple instrument.

Units of Measurement

Description : Units of Measurement

Last Answer : 1 horse power is 745.7 watts 1 horse power = work equal to lifting 550 lbs of weight to one foot for one second 1 calorie is equal to 4.2 Joules 1 barrel is equal to ... often chlorine or bromine. Use: as solvents, as aerosol propellants, in refrigeration. It is commonly used in refrigerator.

List the different level measurement methods.

Description : List the different level measurement methods. 

Last Answer : Liquid Level Measurement Direct method 1. Hook type 2. Sight glass gype 3. Float type 4. Dip stick Indirect method 1. Hydraustatic pressure type 2. Electrical type a) Capacitance level indicator b) Radiation level detector c) Ultrasonic level gauge 3. Radar type

Draw Bourdon tube with LVDT setup for pressure measurement.

Description : Draw Bourdon tube with LVDT setup for pressure measurement.

Last Answer : Bourdon tube with LVDT setup for pressure measurement.

sketch time period measurement by CRO.

Description : sketch time period measurement by CRO.

Last Answer : Horizontal sweep is turned ON and the display appealing on the screen is adjusted by varying different control knobs provided on the front panel of CRO, till the signal is suitably displayed ... Where m=Number of division in one complete cycle n=Setting of time base =Time/Division

different types of errors occurs in measurement.

Description : different types of errors occurs in measurement.

Last Answer : Generally errors are classified into three types: systematic errors, random errors and blunders. 1) Gross Errors 2) Random Errors 3) Systematic Errors Instrumental Errors Environmental ... to wrong observations or reading in the instruments particularly in case of energy meter reading. 

tern null as it applies to bridge measurement.

Description : tern null as it applies to bridge measurement.

Last Answer : Null measurements balance voltages so that there is no current flowing through the measuring device and, therefore, no alteration of the circuit being measured. Null measurements are generally more ... the use of standard voltmeters and ammeters, and they still have limits to their precision.

State how pressure measurement can be done using Dead weight tester.

Description : State how pressure measurement can be done using Dead weight tester.

Last Answer : The handle is fully drawn out and the oil is allowed to enter in the cylinder (i.e. gauge and piston) The weight to be measured is placed on the platform. Now the handle is turned ... of the area of the piston and the pressure indicated on the gauge is equal to the weight under measurement.

Define measurement and state the significance of electrical measurement system.

Description : Define measurement and state the significance of electrical measurement system.

Last Answer : Measurement: Measurement is essentially a process in which magnitude of a quantity is determined in comparison with another similar quantity with significant units. OR The measurement of a given ... x) The measurement conforms the validity of hypothesis and also adds to its understanding.

Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Description : Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Last Answer : Methods for measurement of low resistance:  1. Ammeter voltmeter method  2. Kelvin's bridge method  3. Ohm meter method  4. Potentiometer method  5. Digital/analog multi-meter ... must be infinity for perfectly accurate measurement which is not possible.  2. Connection errors.

State the significance of term measurement.

Description : State the significance of term measurement. 

Last Answer : Measurement is the quantitative comparison between unknown quantities with known standard. For doing this process there is need of physical device, called as measuring instrument. The measurement confirms the validity of the hypothesis and also adds to its understanding.

Explain significance and purpose of electrical measurement system.

Description : Explain significance and purpose of electrical measurement system.

Last Answer : ➢ Significance of Electrical Measurement System  1. The measurement is required for measurement of all physical quantities for e.g speed, velocity, temperature, pressure etc.  2. All electrical ... 4. These standards and references may changes time to time, area to area person to person