Phase margin is the amount of angle to make the system

Phase margin is the amount of angle to make the system 

(1) Oscillatory (2) Stable (3) Unstable (4) Exponential
by

1 Answer

Answer :

Phase margin is the amount of angle to make the system Unstable 

by

Related questions

What will happen to the gain margin if the gain of the open loop system is doubled?

Description : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

Last Answer : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

If the gain of the open loop system is doubled, the gain margin

Description : If the gain of the open loop system is doubled, the gain margin  (1) Is not affected (2) Gets doubled (3) Becomes half (4) Becomes one -forth

Last Answer : If the gain of the open loop system is doubled, the gain margin Becomes half

Explain the concept of lagging and leading phase angle by waveform.

Description : Explain the concept of lagging and leading phase angle by waveform.

Last Answer : i) Leading phase angle :  When two ac quantities of same frequency do not attain their respective zero or peak values simultaneously, then the quantities are said to be out-of-phase quantities. The ... Similarly, in the second diagram, the voltage is said to be lagging the current by  Φ.

The product of apparent power and cosine of the phase angle between circuit voltage and current is?

Description : The product of apparent power and cosine of the phase angle between circuit voltage and current is?

Last Answer : In parllpar reasonans RLC circuit the current is

What will be the phase angle between two alternating waves of equal frequency...

Description : What will be the phase angle between two alternating waves of equal frequency, when one wave attains maximum value the other is at zero value ?

Last Answer : 90° will be the phase angle between two alternating waves of equal frequency, when one wave attains maximum value the other is at zero value.

Two waves of the same frequency have opposite phase when the phase angle between them is?

Description : Two waves of the same frequency have opposite phase when the phase angle between them is?

Last Answer : Two waves of the same frequency have opposite phase when the phase angle between them is 180°.

Define the following terms : 1) Noise margin 2) Power fanout 3) Skew 4) Meta stability

Description : Define the following terms : 1) Noise margin 2) Power fanout 3) Skew 4) Meta stability

Last Answer : 1) Noise Margin: It is a measure of noise immunity of a gate or circuit (noise immunity is the ability of a gate or circuit to tolerate any noise present in a signal without performing a wrong operation) ... OR  A metastable state is half way between logic 0 and logic 1 .It is undefined state.

Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

Description : Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

Last Answer : (i) Balancing Phase currents: Proper (healthy balanced) three phase loads always draw equal currents in all lines but single phase loads in the 3 phase 4 wire system or loads connected between two ... . 11) Minimize I2R losses. 12) Balance the load currents. 13) Regulate the system voltages.

A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum

Description : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is (A) 28.2 mm (B) 26.4 mm (C) 24.4 mm (D) 22.0 mm

Last Answer : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is 22.0 mm

When a V-V three phase transformer system is converted into a Δ-Δ system, increase in capacity of the system is

Description : When a V-V three phase transformer system is converted into a Δ-Δ system, increase in capacity of the system is (A) 86.6% (B) 50% (C) 57.7% (D) 73.2%

Last Answer : When a V-V three phase transformer system is converted into a Δ-Δ system, increase in capacity of the system is 73.2%

write short notes on single phase system.

Description : write short notes on single phase system.

Last Answer : A "phase" in an electrical system is often referred to as the waveform (may be voltage or the current) of the power supply. The waveform in an AC system is typically ... domestic household or commercial supplies and street lighting. Industrial supplies requires three phase electrical supply .

A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the

Description : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system (A) crosses the real axis at +0.1 (B) crosses the real axis at -0.1. (C) crosses the imaginary axis at -0.1 (D) crosses the imaginary axis at +0.1

Last Answer : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system crosses the real axis at -0.1.

When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a

Description : When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is

Last Answer : When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is √3/2

10 Ways to Make Sure You Stay Disorganized

Description : 10 Ways to Make Sure You Stay Disorganized

Last Answer : We talk a lot about getting and staying organized. It's something of an obsession with some people: they have to know where everything is at all times and be able to find what they need at a ... rush to do everything all at once. When you realize how utterly hopeless it is, commence freaking out.

How to Make the World a Better Place

Description : How to Make the World a Better Place

Last Answer : How to Make the World a Better Place Everything wrong with the world can always be changed by doing something right. Many of us complain about the sad state of the world, but end up doing ... others, and a person who helps make the world better for everyone even in the smallest ways possible.

How to Make Plexiglas Windows for Deer Stands

Description : How to Make Plexiglas Windows for Deer Stands

Last Answer : How to Make Plexiglas Windows for Deer Stands Introduction Deer stands are used by seasoned or amateur hunters to hunt deer and other wildlife in a safe, protected, and comfortable environment. These ... Use aluminum frames in place of wooden frames as they are weather resistant and last very long.

How to Make a Paper Airplane ?

Description : How to Make a Paper Airplane ?

Last Answer : A tip for your trip This plane should be thrown overarm and horizontally. If the plane has been made correctly, it should fly straight and reasonably far. It is not the easiest job in the world to fold the plane so poorly that it crashes at the instance thrown.

How do magnets and copper wire make electricity?

Description : How do magnets and copper wire make electricity?

Last Answer : According  to  Faradays  law , a changing  magnetic  field  on  a  conductor  induses  current  in  the  conductor  through   mutual  induction.

How to make power bank from laptop battery cells?

Description : How to make power bank from laptop battery cells?

Last Answer : You can make the power bank from laptop battery cells. Things you need to make power bank from laptop battery cells: Laptop battery cells (about 6 in parallel) Universal Dual USB 5V 1A 2.1A New Hot ... If you have any doubt ask it. Thanks...

Define: i) Firing angle ii) Conduction angle

Description : Define: i) Firing angle ii) Conduction angle

Last Answer : i) Firing angle: The firing angle of a thyristor is defined as the angle between the zero crossing of the applied voltage and the instant at which the thyristor is triggered or fired. It is a ... off. It is a measure of the duration for which the thyristor conducts current during each AC cycle.

How to find total impedance Z, current I and Impedance angle ?

Description : How to find total impedance Z, current I and Impedance angle ?

Last Answer : How to find total impedance Z, current I and Impedance angle ?

The power factor angle and torque angle of a salient pole synchronous generator drawing a current of 1.0 pu

Description : The power factor angle and torque angle of a salient pole synchronous generator drawing a current of 1.0 pu from a lagging load are 45o and 15o, respectively. The direct axis and quadrature axis currents, respectively, are (A) 0.5 pu ... pu, 0.5 pu (C) 0.707 pu, 0.707 pu (D) 0.5 pu, 0.5 pu

Last Answer : The power factor angle and torque angle of a salient pole synchronous generator drawing a current of 1.0 pu from a lagging load are 45o and 15o, respectively. The direct axis and quadrature axis currents, respectively, are 0.866 pu, 0.5 pu

Torque angle for the synchronous machine is the angle between

Description : Torque angle for the synchronous machine is the angle between (A) stator magnetic field and rotor magnetic field (B) stator magnetic field and net magnetic field in the air gap (C) rotor magnetic field and net magnetic field in the air gap (D) excitation voltage and impedance voltage drop

Last Answer : Torque angle for the synchronous machine is the angle between rotor magnetic field and net magnetic field in the air gap

The r.m.s. value of a sinusoidal A.C. current is equal to its value at an angle of______degrees.

Description : The r.m.s. value of a sinusoidal A.C. current is equal to its value at an angle of______degrees.

Last Answer : 45

Tangent of angle of friction is equal to?

Description : Tangent of angle of friction is equal to?

Last Answer : Tangent of angle of friction is equal to coefficient of friction.

Angle of friction is the?

Description : Angle of friction is the?

Last Answer : Angle of friction is the angle between normal reaction and the resultant of normal reaction and the limiting friction.

If the current in a capacitor leads the voltage by 80°, the loss angle of the capacitor is?

Last Answer : If the current in a capacitor leads the voltage by 80°, the loss angle of the capacitor is 10°.

The coupling angle or load angle of synchronous motor is defined as the angle between the?

Last Answer : The coupling angle or load angle of synchronous motor is defined as the angle between the rotor and the stator poles of opposite polarity.

What is meant by firing angle of thyristor?

Description : What is meant by firing angle of thyristor?

Last Answer : The point at which SCR is triggered is known as firings angle of thyristor.

What is the maximum value of torque angle in synchronous motor?

Description : What is the maximum value of torque angle in synchronous motor?

Last Answer : The maximum value of torque angle in synchronous motor is 90 degrees electrical.

The synchronous motor will develop maximum power when the load angle is?

Description : The synchronous motor will develop maximum power when the load angle is?

Last Answer : The synchronous motor will develop maximum power when the load angle is 900.

what is firing angle?

Description : what is firing angle?

Last Answer : Firing angle is time in electrical degrees from the instant the valve voltage is positive to the application of firing pulse to the valve (start of conduction). Also called delay angle.

Draw the labeled block diagram of process control system and explain each block.

Description : Draw the labeled block diagram of process control system and explain each block.

Last Answer : Explanation - Process control system consists of process or plant, sensor, error detector, automatic Controller, actuator or control element. 1) Process or plant- process means some manufacturing sequence ... process which changes the process variable. Output of this block is denoted by u .

What is the time response of a system whose poles lie on the right hand side of s-plane?

Description : What is the time response of a system whose poles lie on the right hand side of s-plane? A) Exponentially increasing B) Exponentially decreasing C) Sinusoidal oscillations D) Step response 

Last Answer : What is the time response of a system whose poles lie on the right hand side of s-plane? A) Exponentially increasing B) Exponentially decreasing C) Sinusoidal oscillations D) Step response 

Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Description : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Last Answer : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is 16

A system is linear if and only if it satisfies

Description : A system is linear if and only if it satisfies

Last Answer : A system is linear if and only if it satisfies principle of superposition and principle of homogeneity

How can the steady-state error in a system be reduced?

Description : How can the steady-state error in a system be reduced?  (1) By decreasing the type of system (2) By increasing system gain (3) By decreasing the static error constant (4) By increasing the input

Last Answer : How can the steady-state error in a system be reduced?  (1) By decreasing the type of system (2) By increasing system gain (3) By decreasing the static error constant (4) By increasing the input

A differentiator is not usually used in control system, because it : -

Description : A differentiator is not usually used in control system, because it : - (A) reduces damping  (B) increases error  (C) reduces gain margin  (D) increases input noise

Last Answer : A differentiator is not usually used in control system, because it : - increases input noise

In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to

Description : In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to (A) Capacitance C. (B) Inductance L. (C) Resistance R. (D) Inductive reactance XL

Last Answer : In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to Inductance L.

Observability of a system is essential for

Description : Observability of a system is essential for (A) finding a solution to the state equation. (B) finding a suitable model in state space. (C) transferring the state of the system from any initial value to any specified final value. (D) state estimation.

Last Answer : Observability of a system is essential for state estimation.

A second order system shows 100% overshoot in its unit step response. It can be categorized as

Description : A second order system shows 100% overshoot in its unit step response. It can be categorized as (A) underdamped system. (B) overdamped system. (C) Critically damped system. (D) undamped system.

Last Answer : A second order system shows 100% overshoot in its unit step response. It can be categorized as undamped system.

lf the poles of system are lying on the imaginary axis in s-plane, then the system will be

Description : lf the poles of system are lying on the imaginary axis in s-plane, then the system will be

Last Answer : lf the poles of system are lying on the imaginary axis in s-plane, then the system will be marginally stable

The damping factor of a particular system is unity, the system response will be

Description : The damping factor of a particular system is unity, the system response will be

Last Answer : The damping factor of a particular system is unity, the system response will be critically damped

The steady state error of the system can be minimized by

Description : The steady state error of the system can be minimized by

Last Answer : The steady state error of the system can be minimized by increasing gain k

Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is

Description : Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is (A) causal & linear (B) non-causal & linear (C) causal & non-linear (D) non-causal & non-linear

Last Answer : Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is non-causal & linear

Negative feedback in a closed-loop control system DOES NOT

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

What are some examples of a closed loop system?

Description : What are some examples of a closed loop system?

Last Answer : C.L s/m. EX. Air conditioner (AC), rocket launcher, radar system, voltage stabilizer etc.

What is an example of an open loop system?

Description : What is an example of an open loop system?

Last Answer : Open loop system. Ex. Electric heater, washing machine, fan, electric switch, etc

What are the advantages of open loop control system?

Description : What are the advantages of open loop control system?

Last Answer : Open loop control system are simple to design. Open loop control system are generally stable.