The desirable properties of transformer core material are 

(1) low permeability and low hysteresis loss. (2) high permeability and high hysteresis loss. (3) high permeability and low hysteresis loss. (4) low permeability and hysteresis loss.

1 Answer

Answer :

The desirable properties of transformer core material are high permeability and low hysteresis loss.

Related questions

Description : State properties of conductor material used for overhead conductor. 

Last Answer : Following are the properties of conductor material:-   1. High conductivity :- Material should have high conductivity 2. High mechanical strength:- Material should have sufficiently high mechanical strength ... available & less costly. 9. Scrap Value: - Material should have high scrap value. 

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Last Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

Last Answer : Material used for construction of transformer core is usually silicon steel.

Description : State any four characteristics of core type transformer.

Last Answer : Characteristics of core type transformer: i) It has one window. ii) It has one magnetic circuit. iii) Core surrounds the winding. iv) Average length of core is more. v) Area of cross ... Better cooling for winding. vii) Mechnical strength is comparatively less. viii) Repair and maintenance is easy.

Description : A 40 kVA transformer has a core loss of 400 W and a full load copper loss of 800 W. The proportion of full load at maximum efficiency is

Last Answer : A 40 kVA transformer has a core loss of 400 W and a full load copper loss of 800 W. The proportion of full load at maximum efficiency is 0.707

Description : The core construction is like spokes of a wheel in following transformer:  (A) Berry Type Transformer (B) Core Type Transformer (C) Shell Type Transformer (D) None of the above

Last Answer : The core construction is like spokes of a wheel in following transformer:  Berry Type Transformer

Description : The main purpose of using core in a transformer is to (A) decrease iron losses (B) eliminate magnetic hysteresis (C) reduce reluctance of the common magnetic circuit (D) prevent eddy current loss

Last Answer : Reduce Relucatnce of the common magnetic circuit.

Description : When secondary of a current transformer is open-circuited its iron core will be?

Last Answer : When secondary of a current transformer is open-circuited its iron core will be hot because of heavy iron losses taking place in it due to high flux density.

Description : The size of a transformer core will depend on?

Last Answer : The size of a transformer core will depend on frequency and area of the core.

Description : Reduction in core losses and increase in permeability are obtained with transformer employing?

Last Answer : Reduction in core losses and increase in permeability are obtained with transformer employing core built-up of laminations of cold rolled grain oriented steel.

Description : Why does the core of a transformer need to be laminated?

Last Answer : Transformer cores are laminated to reduce eddy current loss.

Last Answer : Transformer core is laminated to reduce Eddy current losses.

Last Answer : The desirable static characteristics of a measuring system are accuracy, sensitivity and reproducibility.

Description : To measure an A. C. voltage by using an A.C. potentiometer, it is desirable that the supply for the potentiometer in taken?

Last Answer : To measure an A. C. voltage by using an A.C. potentiometer, it is desirable that the supply for the potentiometer in taken from the same source as the unknown voltage.

Description : What are the desirable characteristics of ideal switch?

Last Answer : Desirable characteristics of the ideal switch: It is desirable to have power switches characteristics closer to ideal switch. The ideal switch should have the following characteristics. Zero resistance when ... . 100% efficiency. Able to control power flow with zero power dissipation.

Description : Which of the following properties is not necessarily desirable in the material for transformer core? A. Mechanical strength B. Low hysteresis loss C. High thermal conductivity D. High permeability

Last Answer : C) high thermal conductivity

Description : In DC generators lamination core are generally made of?

Last Answer : In DC generators lamination core are generally made of silicon steel.

Description : How can I access my desktop options in Properties/Display?

Last Answer : Start /Control Panel/ Display/ Desktop tab.

Description : State properties of ultrasonic waves.

Last Answer : i) Frequency of these sound waves is more than 20kHz ii) Shorter wavelength iii) They carry high amount of sound energy iv) The speed of propagation of ultrasonic waves increases with increase in ... . x) Posses certain vibrations which are used as good massage action in case of muscular pain. 

Description : List the properties of line insulators in brief

Last Answer : Following are the properties of line insulators:  A) Electrical Properties of insulating material:- 1. It should have high resistance. 2. It should have high breakdown voltage. 3. It should have high ... of insulating material:- 1. It should have longer life. 2. It should have low cost

Description : Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties. 

Last Answer : Following are requirements of conductor:- i) High conductivity :  Material should have high conductivity, So that * cross section of conductor (size) reduces, * Copper losses reduces, * So Efficiency ... . Boiling point is 1820°C 9. Specific gravity is 2.7 10. High resistance to corrosion. 

Description : Explain any four properties of Moulding sand. 

Last Answer : 1. Porosity: Molten metal always contain a certain amount of dissolved gases, which are evolved when the metal freezes the molten metal coming in contact with the moist sand , generates steam or ... to the casting. Refractoriness is measured by the sinter point of the sand rather than its melting

Description : State the term nuclear fuel. Also state its properties.

Last Answer : The term nuclear fuel:- Nuclear fuel is a substance that is used in nuclear power stations to produce heat to power turbines. Heat is created when nuclear fuel undergoes nuclear ... fuels contain heavy fissile elements 3. Nuclear fuels are complex, multi-component materials containing actinides

Description : Explain the mechanical properties of insulating materials.

Last Answer : i) Mechanical strength: Mechanical strength depends on temperature and humidity. a) Temperature: High temperature badly affects the mechanical strength of insulating material. While selecting material ... material should have property of easy moulding and machined into required shape and size.

Description : State any four properties of conducting materials.

Last Answer : Electrical properties of conductivity materials: i) Low resistivity. ii) Low temperature coefficient of resistance. iii) High conductivity. iv) Low heat dissipation.  Mechanical properties of ... properties of conductivity materials: i) Adequate resistant to corrosion. ii) Low oxidation. 

Description : From which material field coils of DC generator are made of?

Last Answer : Field coils of DC generator are usually made of copper.

Description : Core type transformers are popular in___________.  (A) High voltage applications (B) Low voltage applications (C) All of the above (D) None of the above

Last Answer : Core type transformers are popular in High voltage applications

Description : A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is (A) 1.125 cm (B) 1.5 cm (C ) 2 cm (D) 8 cm

Last Answer : A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is 2 cm 

Description : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is (A) 28.2 mm (B) 26.4 mm (C) 24.4 mm (D) 22.0 mm

Last Answer : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is 22.0 mm

Description : A ferrite core has less eddy current loss than an iron core because?

Last Answer : A ferrite core has less eddy current loss than an iron core because ferrites have high hysteresis.

Last Answer : The armature core of a D.C. generator is usually made of silicon steel.

Last Answer : When a conductor carries more current on the surface as compared to core, it is due to skin effect.

Description : What is amorphous metal material? Give any three properties of amorphous metal.

Last Answer : Amorphous metal: The amorphous is metal alloy which differ in crystalline structure. The atoms are arranged in random configuration.  Properties of amorphous metal: 1) Thermal conductivity of ... . 6) The alloy does not undergo shrinkage on solidification, which helps in bones attachments.

Description : Material used for construction of transformer core is usually A. 0.4mm to 0.5 mm B. 4mm to 5 mm C. 14mm to 15 mm D. 25mm to 40 mm

Last Answer : d) 25mm to 40mm

Description : evergreen decking material

Last Answer : To do away from the problems associated with wood, such as high costs and decaying, alternative materials were introduced to the deck-builder market. Composite materials are the most popular among these ... driver can damage the groove edge of the board; aregular decking screw can be used instead.

Description : boat decking material

Last Answer : You love staying in the upper deck of your boat while going on a cruise. It serves as your shelter from rain or direct sunlight, at the same time, it treats you to a great view of vast ... When the outer shell is surfaced with a weatherproof material, metal and wood as frames are not much different.

Description : The Guide to Decking Material

Last Answer : Let's face it. The worst enemy of our home's interior are our kids and pets. All that's required to maintain the inside of our home is a little dusting, vacuuming and cleaning. For the ... of them come in various solid colors, which may work to your advantage when trying to cut painting costs.

Description : wood decking material

Last Answer : Most builders choose wood as the main material for decks for several reasons. With proper treatment, wood is expected to last for years without needing any kind of repair. It is also ... for their expensive prices, all people should be encouraged to purchase natural wood decking materials only.

Description : plastic decking material

Last Answer : Modern times call for modern solutions. If before, wood was the only material used to make decks, innovative alternatives are now available to avoid the problems associated with wood. Alternative materials ... with plastic decking materials; you don't need special tools to install them in your home.

Description : decking material prices

Last Answer : Adding a deck to your house provides you with a new place to lounge around and host parties and improve the look of your home. Various materials may be used to build the deck. Naturally, prices also ... tend to have a trade-off in aesthetic quality, if not on the caliber of the very structure.

Description : composite decking material

Last Answer : If you plan to add a new deck to your home, you're probably thinking about what material to use. Most people would look no further and will instantly get hardwood like Cedar and Redwood. ... against innovations, such a type of material is a very welcome development in the world of deck building.

Description : best decking material

Last Answer : Today, homeowners are not only limited to choosing wood as the main material for their new deck. More modern materials such as composites and plastic are also available. The obvious question is ... decking material still depends on what you need and which among the factors above is your priority.

Description : alternative decking material

Last Answer : Wood is the most popular decking material. It has the perfect fusion of beauty and firmness, so we need not ask why it is still the main choice of deck builders. Wood can also be ... your neighbors, consider using alternative decking materials, such as Veranda boards, when building your own deck.

Description : Overalls. Which material is better?

Last Answer : Material is the most important factor to look out for when choosing workwear. Usually cotton, polyester or blended fabrics are chosen for the manufacture of workwear. Each option has ... , operating conditions and personal preferences. Work clothes should provide employees with comfort and safety.

Description : What material should children's furniture be made of?

Last Answer : The most ideal option is furniture made from natural wood. Such material is environmentally friendly, however, many varieties of valuable species are quite expensive. In view of the limited family ... your liking, because, despite its versatility and safety, it should please and bring pleasure.

Description : Suggest the diode material suitable to rectify 0.5V AC signal.

Last Answer : The diode material suitable to rectify 0.5V AC signal is silicon

Description : State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material. 

Last Answer :  (i) Application of PVC paper : 1. It is used in slot lining or motor winding insulation purpose 2. For Insulation of Transformer winding (ii) Application of Porcelain : 1. Mainly used for manufacturing ... on withstand temperature : * H' & C' Class of insulation i e. 180° and above 180°C 

Description : State gaseous and liquid insulating material.

Last Answer : i) Gaseous insulating material : 1. Air 2. Nitrogen 3. Hydrogen 4. SF6 ii) liquid insulating material: 1. Transformer oil 2. Capacitor oil 3. Cable oil 4. Pyranol 5. Savotal 6. Savol 7. Vegetable oil 8. Silicon liquids

Description : (i) Explain the process of diffusion in semiconductor material. (ii) Explain Hall effect.

Last Answer : (i) Diffusion: In a semi conductor bar a concentration gradient exist when either number of electrons or holes is greater in one region of a semi conductor as compared to other region. When ... to determine whether a semiconductor is N type or P type, and to find carrier concentration

Description : Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Last Answer : (i) Polyvinyl Carbide(PVC):it is used in insulation of wires and cables in domestic wiring as well as in aircraft and factory wiring (any one)  (ii) Glass: 1) Alkaline glasses are used for ... with wax or varnishes are used in windings of magnet coils and small medium sized mechanics (any one)