A system is linear if and only if it satisfies

1 Answer

Answer :

A system is linear if and only if it satisfies principle of superposition and principle of homogeneity

Related questions

Description : Linear Algebra Problem the solution to the system of equations

Last Answer : Linear Algebra Problem the solution to the system of equations https://youtu.be/y_FlupirxZM

Description : Linear Time Invariant (LTI) System

Last Answer : Linear Time Invariant System Linear system means a system which possesses the property of superposition. Time invariant system means its behavior and characteristics are fixed over time. Before ... from the impulse response. Impulse response is related to frequency response via Fourier transform.

Description : A linear network has a current input 4cos(ω t + 20º)A and a voltage output 10 cos(ωt +110º) V. Determine the associated impedance.

Last Answer : Solution

Description : What are ‘Linear actuators’ ? State applications.

Last Answer : What are ‘Linear actuators’ ? State applications.

Description : Linear algebra problem: Rank of a matrix

Last Answer : Linear algebra problem: Rank of a matrix https://youtu.be/b7tPLA3_y6Y

Description : Linear algebra problem: The determinant of the matrix

Last Answer : Answer : Linear algebra problem: The determinant of the matrix

Description : Linear Algebra Problem 2

Last Answer : https://youtu.be/zAPDYO0q-9w Linear Algebra Problem 2

Description : Linear Algebra Problem The product of eigen values of the matrix

Last Answer : Linear Algebra Problem The product of eigen values of the matrixhttps://youtu.be/JGcynUZFQ78

Description : Linear and non-linear device

Last Answer : Linear and non-linear device

Description : A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will

Last Answer : A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will not change

Description : Which of the following converts linear displacement from a mechanical reference into a proportional electrical signal containing phase and amplitude information? A) CRO B) LVDT C) RVDT D) None of these

Last Answer : Which of the following converts linear displacement from a mechanical reference into a proportional electrical signal containing phase and amplitude information? A) CRO B) LVDT C) RVDT D) None of these

Description : The power flow problem mathematical model for a linear transmission network (A) is non-linear (B) is linear (C) considers time variation of generation (D) does not consider tap-changing transformers

Last Answer : The power flow problem mathematical model for a linear transmission network is non-linear

Description : What are the disadvantages of the linear regulator? how are they overcome in the switching regulator? What is continuous and discontinuous mode switching regulator?

Last Answer : Disadvantages of the linear regulator: Linear regulator waste power in the form of heat. Linear regulator has very low efficiency. Linear regulator cannot be used for the step ... between continuous mode and discontinuous mode switching regulator.

Description : write short notes on Linear motor.

Last Answer : Normal electrical motor produces rotatory motion same the linear motor produces linear motion. Linear motors have low efficiency. Linear motor can directly produce straight line motion linear motor do not required gears or crank shaft to produce linear motion.

Description : what is linear regulator?

Last Answer : linear regulator video

Description : Draw the labeled block diagram of process control system and explain each block.

Last Answer : Explanation - Process control system consists of process or plant, sensor, error detector, automatic Controller, actuator or control element. 1) Process or plant- process means some manufacturing sequence ... process which changes the process variable. Output of this block is denoted by u .

Description : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

Last Answer : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

Description : What is the time response of a system whose poles lie on the right hand side of s-plane? A) Exponentially increasing B) Exponentially decreasing C) Sinusoidal oscillations D) Step response 

Last Answer : What is the time response of a system whose poles lie on the right hand side of s-plane? A) Exponentially increasing B) Exponentially decreasing C) Sinusoidal oscillations D) Step response 

Description : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Last Answer : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is 16

Description : How can the steady-state error in a system be reduced?  (1) By decreasing the type of system (2) By increasing system gain (3) By decreasing the static error constant (4) By increasing the input

Last Answer : How can the steady-state error in a system be reduced?  (1) By decreasing the type of system (2) By increasing system gain (3) By decreasing the static error constant (4) By increasing the input

Description : Phase margin is the amount of angle to make the system  (1) Oscillatory (2) Stable (3) Unstable (4) Exponential

Last Answer : Phase margin is the amount of angle to make the system Unstable 

Description : If the gain of the open loop system is doubled, the gain margin  (1) Is not affected (2) Gets doubled (3) Becomes half (4) Becomes one -forth

Last Answer : If the gain of the open loop system is doubled, the gain margin Becomes half

Description : A differentiator is not usually used in control system, because it : - (A) reduces damping  (B) increases error  (C) reduces gain margin  (D) increases input noise

Last Answer : A differentiator is not usually used in control system, because it : - increases input noise

Description : In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to (A) Capacitance C. (B) Inductance L. (C) Resistance R. (D) Inductive reactance XL

Last Answer : In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to Inductance L.

Description : Observability of a system is essential for (A) finding a solution to the state equation. (B) finding a suitable model in state space. (C) transferring the state of the system from any initial value to any specified final value. (D) state estimation.

Last Answer : Observability of a system is essential for state estimation.

Description : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system (A) crosses the real axis at +0.1 (B) crosses the real axis at -0.1. (C) crosses the imaginary axis at -0.1 (D) crosses the imaginary axis at +0.1

Last Answer : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system crosses the real axis at -0.1.

Description : A second order system shows 100% overshoot in its unit step response. It can be categorized as (A) underdamped system. (B) overdamped system. (C) Critically damped system. (D) undamped system.

Last Answer : A second order system shows 100% overshoot in its unit step response. It can be categorized as undamped system.

Description : lf the poles of system are lying on the imaginary axis in s-plane, then the system will be

Last Answer : lf the poles of system are lying on the imaginary axis in s-plane, then the system will be marginally stable

Description : The damping factor of a particular system is unity, the system response will be

Last Answer : The damping factor of a particular system is unity, the system response will be critically damped

Description : The steady state error of the system can be minimized by

Last Answer : The steady state error of the system can be minimized by increasing gain k

Description : Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is (A) causal & linear (B) non-causal & linear (C) causal & non-linear (D) non-causal & non-linear

Last Answer : Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is non-causal & linear

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

Description : What are some examples of a closed loop system?

Last Answer : C.L s/m. EX. Air conditioner (AC), rocket launcher, radar system, voltage stabilizer etc.

Description : What is an example of an open loop system?

Last Answer : Open loop system. Ex. Electric heater, washing machine, fan, electric switch, etc

Description : What are the advantages of open loop control system?

Last Answer : Open loop control system are simple to design. Open loop control system are generally stable.

Description : 2000 The rank of matrix is

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : If non-linear loads are connected to the power system, then (A) displacement power factor is same as the total power factor (B) displacement power factor is not equal to the total power ... factor is due to harmonic currents (D) total power factor is due to fundamental component of current

Last Answer : If non-linear loads are connected to the power system, then displacement power factor is not equal to the total power factor

Description : Half the perimeter of a rectangular garden in 36m. Write a linear equation which satisfies this data. Draw the graph for the same. -Maths 9th

Last Answer : Solution :-

Description : Describe the use of Pneumatic system in daily life.

Last Answer : I. Automatic tyres are inflated with compressed air. II. Spray guns use compressed air for spraying paints. III. Compressed air is used in air powered tools like hammers and drills IV. It is also used in air brake system in heavy vehicles.

Description : Write short note on UPS and its usage in railway system.

Last Answer : Ans. Ideally, the voltage supply by the utility system should be perfect sine wave without any harmonics, at its nominal frequency of 50 Hz and at its nominal magnitude. In practice however voltage can ... load from one source to the other results in the least amount of disturbance seen by the load.

Description : Septic System Design

Last Answer : Most people, when they get their own property, take all their time designing and building the house first and worry about the septic system later. For the most part it works out just fine, the house is built ... that it's a bad choice-it isn't-but it's practical to always go for the least expensive.

Description : The Lymphatic System

Last Answer : An Overview of the Lymphatic System The lymphatic system refers to a type of network in the body that consists of the lymphoid organs, lymphatic tissues, lymph ducts, lymph nodes, lymph vessels and ... many ways in which the lymphatic system takes action in a lot of the human body's processes.

Description : Septic System Maintenance

Last Answer : Nobody is interested in thinking about what happens when someone forgets to clean his or her septic system in the backyard. We don't need to tell you either. Not draining and cleaning your septic ... its regular cleaning schedule you don't have to worry about the system breaking down anytime soon.

Description : Septic System Cleaning

Last Answer : A septic tank requires cleaning to remove the scum or solid wastes that have accumulated in it over the years. The modern septic system was designed to allow liquid waste to flow freely back out as ... from clogs and impurities? Remember, when the tank goes, the system goes. Take note of that.

Description : How To Make A Sprinkler System

Last Answer : Watering plants can be quite tiresome, especially for huge gardens. You will have to walk through the maze of shrubs, blooms and rocks just to sprinkle every garden plant with water. Thanks to human ... 't join the show American Inventor with this invention; this writer would not be very happy.

Description : How to Choose a Home Security System

Last Answer : How to Choose a Home Security System Burglars can strike the moment your house is left alone or when everyone's asleep. Even if all the doors are locked, some of them can still enter using their ... protected upon the trigger of an alarm or a flick of a switch from the system's control panel.

Description : How to Care for Your Immune System

Last Answer : How to Care for Your Immune System Your immune system is important in keeping you healthy, helping you recover from disease and preventing disease from ever affecting you in the first place. The immune ... Live a good long life with a healthy and strong immune system. Remember: Health is wealth!

Description : How To Boost Your Immune System

Last Answer : How To Boost Your Immune System Your immune system is one of your body's most important parts. It protects you from having to succumb to every little illness that your body is in danger of ... defense against pathogens. Boost your immune system and Ensure that you will live a long and healthy life.

Description : How to Install a Surround Sound System

Last Answer : How to Install a Surround Sound System The complete multimedia experience is in great part about the perfect execution of sound. While normal stereo speakers are great for watching TV or some movies, ... new surround sound system and enjoy every bit and beat for the best audio experience possible.