The velocity of travelling wave through a cable of relative permittivity 36 is

The velocity of travelling wave through a cable of relative permittivity 36 is
by

1 Answer

Answer :

The velocity of travelling wave through a cable of relative permittivity 36 is 0.5 x 108 m/sec

by

Related questions

The bridge most suited for accurate measurement of relative permittivity of dielectric materials is

Description : The bridge most suited for accurate measurement of relative permittivity of dielectric materials is (A) Carey Foster Bridge (B) Anderson’s bridge (C) Heaviside Bridge modified by Campbell. (D) Schering Bridge.

Last Answer : The bridge most suited for accurate measurement of relative permittivity of dielectric materials is Schering Bridge.

A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to

Description : A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is (A) 1.125 cm (B) 1.5 cm (C ) 2 cm (D) 8 cm

Last Answer : A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is 2 cm 

The coefficient of reflection for current wave is

Description : The coefficient of reflection for current wave is

Last Answer : The coefficient of reflection for current wave is 1 or -1

Relative permeability of vacuum is?

Description : Relative permeability of vacuum is?

Last Answer : Relative permeability of vacuum is 1.

The relative permeability of a ferromagnetic material is?

Description : The relative permeability of a ferromagnetic material is?

Last Answer : The relative permeability of a ferromagnetic material is more than 100 or 1000.

Drift velocity depends on ________

Description : Drift velocity depends on ________ A) Electron mobility B) Electric field C) Both A and B D) None of these

Last Answer : Drift velocity depends on ________ A) Electron mobility B) Electric field C) Both A and B D) None of these

The pressure and velocity at the throat of a Venturi tube, measuring the flow of a liquid, are related to the

Description : The pressure and velocity at the throat of a Venturi tube, measuring the flow of a liquid, are related to the upstream pressure and velocity, respectively, as follows: (A) Pressure is lower but ... velocity is lower (C) Both pressure and velocity are lower (D) Pressure and velocity are identical

Last Answer : The pressure and velocity at the throat of a Venturi tube, measuring the flow of a liquid, are related to the upstream pressure and velocity, respectively, as follows: (A) Pressure is lower but ... lower (C) Both pressure and velocity are lower (D) Pressure and velocity are identical

A cable has an insulation of relative permittivity 2. If the insulation is replaced by one of relative permittivity

Description : A cable has an insulation of relative permittivity 2. If the insulation is replaced by one of relative permittivity 4, then capacitance of the cable (a) is doubled (b) is halved (c) remains unchanged (d) is reduced 

Last Answer : B

State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) Minimum clearance between cable and water pipe line when running in parallel. (iii) If cable is laid through pipe what should be diameter of pipe. (iv) When more than one cable is to be laid in the same trench, what should be minimum spacing between two cables ?

Description : State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) ... is to be laid in the same trench, what should be minimum spacing between two cables ?  

Last Answer : (i) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr. (ii) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr ... should be minimum spacing between two cables :- Then minimum 30 cm spacing is provided between 2 cables 

I have 10 minutes to decide whether to cancel my cable help me choose?

Description : I have 10 minutes to decide whether to cancel my cable help me choose?

Last Answer : Do it. Piracy is free. Just avoid the torrents.

How do I set up a Universal Remote Control to my Suddenlink cable box?

Description : How do I set up a Universal Remote Control to my Suddenlink cable box?

Last Answer : answer:

Does anyone have the USB GO! Link Cable?

Description : Does anyone have the USB GO! Link Cable?

Last Answer : You can usually get drivers and related software from the manufactures web page.

Where can I get an HSSDC to USB cable or similar.

Description : Where can I get an HSSDC to USB cable or similar.

Last Answer : I would call tyco electronics or amphenol customer service and see if they have any standard cable assemblies. They might have some in their sample stock. It's possible that this isn't a standard and the wiring ... match up though. I work for TE and I've never heard of a HSSDC to USB cable assembly.

Why is the death penalty a non-view event when it could be assessible to all by cable?

Description : Why is the death penalty a non-view event when it could be assessible to all by cable?

Last Answer : I agree that it shouldn't be shied away from- especially if one supports it. However, showing it on television would violate a few laws. So to get around those it would have to be either a pay ... I just don't see how it will happen with the way our communication and broadcasting system is set up.

Where can I find a CNT or LMR 400 cable?

Description : Where can I find a CNT or LMR 400 cable?

Last Answer : Check your local Radio Shack store or Order Online -> http://www.google.com/products?hl=en&source=hp&q=CNT%20or%20LMR%20400%20cable&rlz=1R2ADSA_enUS360&oq=&um=1&ie=UTF-8&sa=N&tab=wf

How can I use a multimeter to find out how many OHMS are in a cable?

Description : How can I use a multimeter to find out how many OHMS are in a cable?

Last Answer : Measure the potential difference (V) across the cable and the current (I) running through it. Then use Ohm’s law: V = IR. R is the resistance, given in ohms, where 1 ohm is 1 volt divided by 1 amp.

I can't find this cable anywhere!

Description : I can't find this cable anywhere!

Last Answer : Ahem

Why do we now have commericals on cable television?

Description : Why do we now have commericals on cable television?

Last Answer : Not the defend the cable companies, but their operating and infrastructure costs are constantly going up. The money’s got to come from somewhere.

Can I cut a cable wire?

Description : Can I cut a cable wire?

Last Answer : probably best just to feed it into the hole, if possible. you may want it later. but, if you're sure you won't, then,yes, you can.

State the procedure for laying / installation of underground cable.

Description : State the procedure for laying / installation of underground cable.  

Last Answer : 1) Direct laying Cable: or Trench laying method: Procedure: * For laying of a cable trench about 1.5m deep and 0.5m wide is made along the cable route. * A ... over. * Cables laid in this manner are usually plain lead covered because troughing affords good mechanical protection. 

desirable properties of Cable

Description : desirable properties of Cable

Last Answer : Following are the main properties of cables:  1. Stranded Conductor: The conductor used for cable should be stranded specially for large size of cable because,  To increase the flexibility ... and mechanical injury.  7. Life: The material used for cable should have long life. 

Why is "RJ-45" cable called "RJ-45" ?

Description : Why is "RJ-45" cable called "RJ-45" ?

Last Answer : rj = registered jack 45 = is number of standard interface and contains 8 separate wires

Why cable outer sheath is black in color?

Description : Why cable outer sheath is black in color?

Last Answer : There are cables with different colors, for example, red, orange, grey. PVC or HDPE, the plastics that the jacket of the cable is made of, have to be UV-stabilized. Carbon black is a common and cheapest additive for it purpose

How rating of main switch and cable is selected for Industrial Installation.

Description : How rating of main switch and cable is selected for Industrial Installation.

Last Answer : 1. Rating of Main Switch or Fuse Rating is decided in industrial installation: Rating of main switch or fuse is based up the starting current of motor. For calculating starting current is considered 2 ... take 1.5 times the rated current or full load current. & thus cable rating is decided.

State functions of ; i) Cable box ii) Guard wire iii) Shackle insulator iv) Stay wire used in service connection

Description : State functions of ; i) Cable box ii) Guard wire iii) Shackle insulator iv) Stay wire used in service connection

Last Answer : i) Function of Cable box: To hold and inspect incoming and outgoing terminals  ii) Function of Guard wire : A grounded conductor placed beneath an overhead transmission line in order to ground ... in service connection: To give mechanical Support to pole, line and prevent leakage current if any

If the insulation resistance of a cable of length 10 km is 1 mega ohm, its insulation resistance

Description : If the insulation resistance of a cable of length 10 km is 1 mega ohm, its insulation resistance for 50 km length will be

Last Answer : If the insulation resistance of a cable of length 10 km is 1 mega ohm, its insulation resistance for 50 km length will be 0.2 mega ohm

A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum

Description : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is (A) 28.2 mm (B) 26.4 mm (C) 24.4 mm (D) 22.0 mm

Last Answer : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is 22.0 mm

what is the use of bedding on underground cable?

Description : what is the use of bedding on underground cable?

Last Answer : Bedding is the layer above the lead sheath it protects the lead sheath from corrosion that means it gives chemical protection to metallic sheath(lead sheath)

How To Make A Wave Bottle

Description : How To Make A Wave Bottle

Last Answer : Students will observe water moving in waves. Materials: A 1 liter plastic bottle for each student. Vegetable oil Food coloring Water Paper Pencils Instructions: Give each student a plastic bottle. Ask ... effect waves such as the ocean floor, sandbars, rocky coasts and, of course, the moon.

How to Stay Cool in a Heat Wave

Description : How to Stay Cool in a Heat Wave

Last Answer : How to Stay Cool in a Heat Wave A heat wave may last for a few days to a few weeks and may happen with extreme humidity. Though you can't prevent heat waves, there are things you can do to ... your home. There are a lot of alternatives you can do to keep your home and your family heatwave safe.

How does Wave Energy Work?

Description : How does Wave Energy Work?

Last Answer : How does Wave Energy Work? There has been a major shift in thinking all around the world on what types of energy we should use. Unfortunately, the world currently runs on fossil fuels such as oil and ... attractive in the next couple of decades. This should lead to a spur in their wide scale use.

Draw single phase full wave mid-point converter for inductive load. Draw input and output waveforms for it.

Description : Draw single phase full wave mid-point converter for inductive load. Draw input and output waveforms for it. 

Last Answer : Circuit Diagram: Waveforms:

operation of half wave rectifier type AC Voltmeter.

Description : operation of half wave rectifier type AC Voltmeter.

Last Answer :  Half-wave Rectifier Voltmeter The d'Arsonval meter movement only responds to the average or dc value of the current through the moving coil. In order to measure alternating ... ) input voltage signal alternating signal needs to be rectified first by using diode rectifier to produce 

State the concept of continuous wave RADAR. Sketch its block diagram. State its any two applications.

Description : State the concept of continuous wave RADAR. Sketch its block diagram. State its any two applications.

Last Answer : Concept- Transmission is continuous here, the circulator is used to provide isolation between the transmitter and the receiver. Since transmission is continuous, it would be pointless to use a ... It is used to measurement of relative velocity to distinguish moving target from stationary objects 

State advantages and disadvantages of continuous wave Radar

Description : State advantages and disadvantages of continuous wave Radar

Last Answer : Advantages continuous wave RADAR : 1.Single frequency transmission and hence narrow receiver bandwidth 2.Duty cycle is unity, so mean power can be as high as transmitters will permits. 3.Ability ... required for receiver and transmitter. 3.Cannot detect targets crossing its beam at right angles.

Justify electromagnetic wave is said to be transverse wave.

Description : Justify electromagnetic wave is said to be transverse wave. 

Last Answer : Transverse electromagnetic wave:- The electromagnetic waves are oscillations which propagate through free space. In electromagnetic waves the direction of electric field, magnetic field & propagation are ... electric field vector with respect to the surface (i.e. looking at the horizon) 

Define : i) Average value ii) RMS value of an AC Wave.

Description : Define : i) Average value ii) RMS value of an AC Wave.

Last Answer : i) Average value: The average value is defined as the average of all instantaneous values during one alternation . That is, the ratio of the sum of all considered instantaneous values to the ... as produced by the alternating current when flowing through the same resistance for the same time.

Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Description : Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Last Answer : Single phase fully control bridge converter with RL load: 1. During positive half cycle of input voltage, T1 and T2 are forward biased and during negative half cycle, T3 and T4 are forward biased. Therefore, T1-T2 ... cycle till the firing of next pair of SCRs as shown in the waveform.

Draw a neat diagram of 1Ф half wave controlled converter with RL load. Give its operation.

Description : Draw a neat diagram of 1Ф half wave controlled converter with RL load. Give its operation.

Last Answer : Single phase fully controlled half wave converter:  The circuit diagram of single-phase half-wave controlled rectifier with RL load and without freewheeling diode is shown in Fig. (a). The SCR T is ... , when again pulse is applied, the SCR is turned on & the above cycle is repeated. 

Instantaneous value of a sine wave voltage

Description : Instantaneous value of a sine wave voltage

Last Answer : Instantaneous value of a sine wave voltage

Draw a labeled block diagram of sine wave generator and state function of each block.

Description : Draw a labeled block diagram of sine wave generator and state function of each block. 

Last Answer : Function Generator:  This instrument can deliver sine, triangular & square waves with frequency range of 0.01 Hz to 100 kHz.  The frequency control network is governed by a frequency ... voltage reaches a predetermined level on the negative slope of the integrator's output voltage.

Explain full wave bridged rectifier with the help of circuit diagram and input output waveform.

Description : Explain full wave bridged rectifier with the help of circuit diagram and input output waveform.

Last Answer : 1. In positive half cycle (0 to Π): The end A of the secondary winding becomes positive and end B negative. This makes diode D1 and D4 forward biased while diode D2 and D3 are reverse biased. These two diodes will ... D2 and D3 when it is conducting is as follows.  B - D2 - RL - D3 - A 

The fractional-pitch used for eliminating 7th harmonic from the emf wave of an alternator is

Description : The fractional-pitch used for eliminating 7th harmonic from the emf wave of an alternator is (A) 2/3 (B) 5/6 (C) 7/8 (D) 6/7

Last Answer : The fractional-pitch used for eliminating 7th harmonic from the emf wave of an alternator is 6/7

The equation of 50 Hz current sine wave having r.m.s. value of 60 A is?

Description : The equation of 50 Hz current sine wave having r.m.s. value of 60 A is?

Last Answer : (60*√2)Sin(2π*50*t)

Form factor for a sine wave is?

Description : Form factor for a sine wave is?

Last Answer : 1.11

For a sine wave with peak value Imax the r.m.s. value is?

Description : For a sine wave with peak value Imax the r.m.s. value is?

Last Answer : For a sine wave with peak value Imax the r.m.s. value is 0.707.

The period of a wave is?

Last Answer : The period of a wave is time required to complete one cycle.

A sine wave has a frequency of 50 Hz. Its angular frequency is _______ radian/second.

Last Answer :  A sine wave has a frequency of 50 Hz. Its angular frequency is 100 n radian/second.

Wave winding is composed of?

Last Answer : Wave winding is composed of that even number which is exact multiple of poles + 2.