Which of the following would not be required to be checked before welding? a) The welding consumables b) The welder qualification c) Calibration of the welding equipment d) The workshop humidity

Which of the following would not be required to be checked before welding?  
a) The welding consumables b) The welder qualification
c) Calibration of the welding equipment d) The workshop humidity
by

1 Answer

Answer :

d) The workshop humidity
by

Related questions

What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant information c) None if the tensile strength of the consumables is the same as the approved one d) Change the electrode for the correct type and continue welding

Description : What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant ... the same as the approved one d) Change the electrode for the correct type and continue welding

Last Answer : b) Report the incident and record all relevant information

t is permissible to allow trainee welder to carry out production welding? a) Never b) Yes as long as the supervisor is happy with his workmanship standard c) Yes as long as he has the approved qualification to cover the intended scope of work d) Yes as long as no NDT is required on the finished weld

Description : t is permissible to allow trainee welder to carry out production welding? a) Never b) Yes as long as the supervisor is happy with his workmanship standard c) Yes as long as he has the approved ... cover the intended scope of work d) Yes as long as no NDT is required on the finished weld

Last Answer : a) Never

In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends? a) They are easier to produce b) The testing equipment cannot handle thick root/face bends c) Root defects are not important for welder qualification d) They give more accurate indications

Description : In welder qualification testing of 45mm plates, why are side bends used instead of root and face bends? a) They are easier to produce b) The testing equipment cannot handle thick root/face bends c) Root defects are not important for welder qualification d) They give more accurate indications

Last Answer : d) They give more accurate indications

Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder as he knows which welds are likely to produce the least defects c) This will be referenced in the inspection and test plan d) Nobody, as welding is always carried out to a high standard the use of percentage NDT is of no real value

Description : Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder ... welding is always carried out to a high standard the use of percentage NDT is of no real value

Last Answer : c) This will be referenced in the inspection and test plan

Who has the responsibility of ensuring the welder is using the correct polarity during welding? a) The welder and the welding inspector b) Store man and the welder c) Welding Engineer d) The Q/A department

Description : Who has the responsibility of ensuring the welder is using the correct polarity during welding? a) The welder and the welding inspector b) Store man and the welder c) Welding Engineer d) The Q/A department

Last Answer : a) The welder and the welding inspector

Who determines what the correct weld preparation (root gap, root face, included angle) should be? a) The welding engineer b) The welding supervisor c) The welder will decide d) The inspector will recommend what is suitable

Description : Who determines what the correct weld preparation (root gap, root face, included angle) should be? a) The welding engineer b) The welding supervisor c) The welder will decide d) The inspector will recommend what is suitable

Last Answer : a) The welding engineer

welding i want to weld steel bars to my trailer should i use a arch welder or a wire feed welder?

Description : welding i want to weld steel bars to my trailer should i use a arch welder or a wire feed welder?

Last Answer : arch welding is a more stable form of welding. it get hotter and creates a stronger bond

In new Rail as well as second hand rails how much end bends of the rails in lateral direction are permitted when checked with one metre straight edge before welding? (i) ± 0.2 mm in lateral direction (ii) ± 0.3 mm in lateral direction (iii) ± 0.5 mm in latera

Description : In new Rail as well as second hand rails how much end bends of the rails in lateral direction are permitted when checked with one metre straight edge before welding? (i) ± 0.2 mm in lateral direction (ii) ± 0.3 mm in lateral direction (iii) ± 0.5 mm in latera

Last Answer : (iii) ± 0.5 mm in latera

In new Rail as well as second hand rails how much end bends of the rails in vertical are permitted when checked with one meter straight edge before welding? (i) +0.5mm, -0 mm in vertical * (ii) +0.2mm, -.3 mm in vertical (iii) +0.3mm, -2 mm in vertical (iv) 0 mm, +.5 mm in vertical

Description : In new Rail as well as second hand rails how much end bends of the rails in vertical are permitted when checked with one meter straight edge before welding? (i) +0.5mm, -0 mm in vertical * (ii) +0.2mm, -.3 mm in vertical (iii) +0.3mm, -2 mm in vertical (iv) 0 mm, +.5 mm in vertical

Last Answer : (i) +0.5mm, -0 mm in vertical *

Why it is sometimes necessary to preheat the base material before welding? a) To remove oil and grease b) To remove moisture from inside the material c) To prevent the possible risk of cracking d) Not required if using cellulosic electrodes as these will provide enough heat

Description : Why it is sometimes necessary to preheat the base material before welding? a) To remove oil and grease b) To remove moisture from inside the material c) To prevent the possible risk of cracking d) Not required if using cellulosic electrodes as these will provide enough heat

Last Answer : c) To prevent the possible risk of cracking

Who has the final responsibility of sentencing and accepting a weld on completion? a) The contractor’s inspector b) Site manager c) The welder d) The client’s inspector or certifying authority

Description : Who has the final responsibility of sentencing and accepting a weld on completion? a) The contractor’s inspector b) Site manager c) The welder d) The client’s inspector or certifying authority

Last Answer : d) The client’s inspector or certifying authority

The divisional supdt may sanction up to Rs ____ in each case for purchase of equipments and consumables connected with computer and other equipments. a) 400/- b) 1500/- c) 5000/- d) 2500/

Description : The divisional supdt may sanction up to Rs ____ in each case for purchase of equipments and consumables connected with computer and other equipments. a) 400/- b) 1500/- c) 5000/- d) 2500/

Last Answer : c) 5000/

What calibration label is used when actual measurement values must be known to use the test equipment?

Description : What calibration label is used when actual measurement values must be known to use the test equipment?

Last Answer : CALIBRATED—REFER TO REPORT.

What is not included in prevention costs? a) quality planning b) formal technical reviews c) test equipment d) equipment calibration and maintenance

Description : What is not included in prevention costs? a) quality planning b) formal technical reviews c) test equipment d) equipment calibration and maintenance

Last Answer :  Ans: d

What qualification is required for computer it jobs?

Description : What qualification is required for computer it jobs?

Last Answer : The educational requirements and necessary experience will vary from one job posting to another. There are 2-year, 4-year and graduate degrees in computer sciences and related fields. Each ... will not require experience, while other positions in engineering and design fields especially, will.

When would you measure the minimum preheat temperature? a) On completion of each pass b) Immediately prior to commencing the first pass and subsequent passes c) When the welding is complete d) Minimum preheat temperature measurement is only required if the heat input is lower than that specified in WPS

Description : When would you measure the minimum preheat temperature? a) On completion of each pass b) Immediately prior to commencing the first pass and subsequent passes c) When the welding is ... preheat temperature measurement is only required if the heat input is lower than that specified in WPS

Last Answer : b) Immediately prior to commencing the first pass and subsequent passes

What other qualification must someone meet before he or she can serve on a jury?

Description : What other qualification must someone meet before he or she can serve on a jury?

Last Answer : Need answer

What is the basic qualification of an applicant for public carrier network before a certificate of public convenience or a provisional authority is issued? A. Franchise B. SEC document C. Business permit D. Radio station license

Description : What is the basic qualification of an applicant for public carrier network before a certificate of public convenience or a provisional authority is issued? A. Franchise B. SEC document C. Business permit D. Radio station license

Last Answer : A. Franchise

A detailed description of methodology of research is required in (A) Thesis/Dissertation (B) Symposium/Workshop (C) Seminar paper/Articles (D) Conference and Seminar Papers

Description : A detailed description of methodology of research is required in (A) Thesis/Dissertation (B) Symposium/Workshop (C) Seminar paper/Articles (D) Conference and Seminar Papers

Last Answer : (A) Thesis/Dissertation

When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if they were in a sealed vacuum pack prior to use c) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use

Description : When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if ... ) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use

Last Answer : b) None if they were in a sealed vacuum pack prior to use

Examination papers are checked by ……… -Technology

Description : Examination papers are checked by ……… -Technology

Last Answer : Examination papers are checked by OMR

What type of arc welding equipment is necessary when participating in arc welding?

Description : What type of arc welding equipment is necessary when participating in arc welding?

Last Answer : The most important equipment you can have is your safety equipment, your gloves, visor and heavy-duty clothing. You have to have some sort of a power source to generate the electricity necessary for arc welding, so I'd say a power source is your most important arc welding equipment.

What type of safety protection do you need for standard welding equipment?

Description : What type of safety protection do you need for standard welding equipment?

Last Answer : "While using welding equipment, you should always wear safety googles and protective gloves." Make sure you have on a welding jacket and long pants when you're using welding equipment. Those sparks can be very dangerous.

Electric welding equipment works best at

Description : Electric welding equipment works best at  A) Low voltage and low current B) Low Voltage and high current C) High voltage and low current D) High voltage and high current

Last Answer : Electric welding equipment works best at Low Voltage and high current 

Can I use a 115v 26 amp welder on a regular outlet?

Description : Can I use a 115v 26 amp welder on a regular outlet?

Last Answer : answer:As long as the wiring and the breakers are at least 30 amp you should be okay. Don't try to use it in a 20 amp circuit. If in doubt have someone come in and test the circuits, or ... . A little effort and money spent up front may save you from burning down your garage and possibly your house.

What are the pros and cons of becoming a welder?

Description : What are the pros and cons of becoming a welder?

Last Answer : answer:It's a good craft and well paid when there is work. If you're into the building trades, it is a good choice. On the other hand, you don't do much more than weld all the time. And if ... working construction you might be in a ditch or outdoors in bad weather. But that's true of a lot of jobs.

Any tips for a novice welder?

Description : Any tips for a novice welder?

Last Answer : answer:My tip is this. Have a potato with you at all times. My father was a mechanical engineer that owned a welding and machine shop. After school we went to the shop. When I wasn't sweeping I was bolting ... eyes. It still hurt but it was a lot better. And practice.. Being a good welder is a art.

What should I get for my first welder, arc or stick?

Description : What should I get for my first welder, arc or stick?

Last Answer : ‘pends, I think you should get the arc.

How to land top welder jobs?

Description : How to land top welder jobs?

Last Answer : Welding is an industry where lots of really good jobs exist. If you want to be competitive for welder jobs, then you have to do the right things to position yourself. These jobs pay very ... jobs. These places have dedicated programs that do nothing but provide prospective welders with a skill set.

How many pipe welder jobs are currently open?

Description : How many pipe welder jobs are currently open?

Last Answer : That depends, are you wondering about pipe welder jobs at acertain company, in a certain city, a certain state, or all thejobs in the country? If you want to know about a certain company,contact the ... out. If it is one of the other choices,narrow down the demographic on monster to get an idea.

What is the salary for an underwater welder?

Description : What is the salary for an underwater welder?

Last Answer : While underwater welding is a dangerous career, it can be very lucrative and pay upwards of 100,000 dollars per year with a median salary around 90,000 dollars annually

what is the salary of an underwater welder?

Description : what is the salary of an underwater welder?

Last Answer : An underwater welder starts off in the mid 40s. You should research this on any website and scan salary given in ads. You may want to call a center by using 411. This could direct you to an actual center.

What kind of experience do I need to be a welder?

Description : What kind of experience do I need to be a welder?

Last Answer : According to my research in order to become a Welder you will need to take a test to receive your Welder's certificate. Once you get the certificate you can apply for jobs.

How do I learn to be a professional welder?

Description : How do I learn to be a professional welder?

Last Answer : Most community colleges offer welding as a degree. You will have a teacher who knows everything about welding and has the experience to back them up.

does a welder have to do any type of schooling/classes?

Description : does a welder have to do any type of schooling/classes?

Last Answer : There are multiple technical trade schools that provide welding classes and certification programs. One example is http://www.witcc.edu

New AT weld should be entered in TMS by ? (i) Sectional JE/SSE* (ii) Incharge SSE (iii) Welder (iv) None of the above

Description : New AT weld should be entered in TMS by ? (i) Sectional JE/SSE* (ii) Incharge SSE (iii) Welder (iv) None of the above

Last Answer : (i) Sectional JE/SSE*

Is "hero" a subjective qualification?

Description : Is "hero" a subjective qualification?

Last Answer : Reminds me of a joke. “You can say a lot of things about Hitler. But he did kill Hitler.”

What is the qualification for designation as Hawk-Eagle ?

Description : What is the qualification for designation as Hawk-Eagle ?

Last Answer : answer:Taxonomy of the Changeable Hawk Eagle There are also Ornate, Mountain and African Hawk Eagles. http://en.wikipedia.org/wiki/Ornate_Hawk-Eagle http://en.wikipedia.org/wiki/Mountain_Hawk-Eagle http://en.wikipedia.org/wiki/African_Hawk-Eagle

What is Minimum educational qualification for get admission in MBA.

Description : What is Minimum educational qualification for get admission in MBA.

Last Answer : answer:It all depends on the school but a bachelors degree would be the first step with a minimum GPA. They may also require a minimum score on your GRE if they have that for a entrance test. Check with the school you are interested in, their admission office or catalog would have the requirements.

What's in a daily life of someone at BMQ? (Basic Military Qualification)

Description : What's in a daily life of someone at BMQ? (Basic Military Qualification)

Last Answer : As your recruiter to show you the latest film of the day you will have. It is very informative.

Do you think the fact that I owned my own business for four years would give me some valid qualification for a position as a County Economic Developer?

Description : Do you think the fact that I owned my own business for four years would give me some valid qualification for a position as a County Economic Developer?

Last Answer : Do you want an answer, or validation?

Do you think the mental health of candidates should be a mandatory qualification for a President?

Description : Do you think the mental health of candidates should be a mandatory qualification for a President?

Last Answer : Wow! And in the American Conservative, too! Well, I think the problems this article discussed are clearly there in his behavior, for those who have the eyes to look. In watching the debates, I realized he ... 't agree. In any case, I think we should have full infomation on which to make a choice.

Write down the qualification for the Vice-President of India? -SST 10th

Description : Write down the qualification for the Vice-President of India? -SST 10th

Last Answer : The qualifications for the Vice-President of India are as follows: He/She should be a citizen of India. He/She has completed the age of 30 years. He/She is qualified for election as a member of the Rajya Sabha. He/She should not hold any office of profit under the Government of India..

What does qualification mean ?

Description : What does qualification mean ?

Last Answer : Qualification means qualification.

What are the qualification needed for getting successful and brighr career in seo jobs?

Description : What are the qualification needed for getting successful and brighr career in seo jobs?

Last Answer : SEO functions as an engine of the digital marketing process, no online company can be successful without the support of the Digital marketing. SEO is most cost-effective marketing strategies as ... For further assistance in seo you can visit: https://mysticwebdesigns.com/search-engine-optimization/

What do you mean by Qualification shares?

Description : What do you mean by Qualification shares?

Last Answer : What do you mean by Qualification shares?

What is the venn diagram to show that there are 8 equal candidates for a job 3 are qualified accountants 4 are graduates and two have neither of this qualification?

Description : What is the venn diagram to show that there are 8 equal candidates for a job 3 are qualified accountants 4 are graduates and two have neither of this qualification?

Last Answer : I have found a similar question (via a web search) asking aboutprobabilities with the given data, but nothing about a venn diagramso I have rewritten the question to best represent the originaltruncated ... inside the overlap of the twocircles and 3 inside the graduate only section of that circle.