What is meant by Maskable interrupts? a) An interrupt which can never be turned off. b) An interrupt that can be turned off by the programmer. c) none

What is meant by Maskable interrupts?  
a) An interrupt which can never be turned off.  
b) An interrupt that can be turned off by the programmer.  c) none
by

1 Answer

Answer :

b) An interrupt that can be turned off by the programmer.
by

Related questions

In 8086, Example for Non maskable interrupts are a) Trapb) RST6.5 c) INTR

Description : In 8086, Example for Non maskable interrupts are a) Trapb) RST6.5 c) INTR

Last Answer : a) Trap

8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64

Description : 8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64

Last Answer : a) 8

An interrupt can be temporarily ignored by the counter is called _______ A. Maskable Interrupt B. Non-maskable Interrupt C. vectored Interrupt D. None of the Above

Description : An interrupt can be temporarily ignored by the counter is called _______ A. Maskable Interrupt B. Non-maskable Interrupt C. vectored Interrupt D. None of the Above

Last Answer : A. Maskable Interrupt

Which of the following is an interrupt according to temporal relationship with system clock? (1) Maskable interrupt (2) Periodic interrupt (3) Division by zero (4) Synchronous interrupt

Description : Which of the following is an interrupt according to temporal relationship with system clock? (1) Maskable interrupt (2) Periodic interrupt (3) Division by zero (4) Synchronous interrupt

Last Answer : Answer: 4

What is meant by interrupt?

Description : What is meant by interrupt?

Last Answer : Interrupt is an external signal that causes a microprocessor to jump to a specific subroutine.

How many interrupts does 8085 have, mention them

Description : How many interrupts does 8085 have, mention them

Last Answer : The 8085 has 5 interrupt signals; they are INTR, RST7.5, RST6.5, RST5.5 and TRAP

Explain priority interrupts of 8085.

Description : Explain priority interrupts of 8085.

Last Answer : The 8085 microprocessor has five interrupt inputs. They are TRAP, RST 7.5, RST 6.5, RST 5.5, and INTR. These interrupts have a fixed priority of interrupt service. If two or more interrupts go ... 8085 is shown in the table. Interrupts Priority TRAP RST 7.5 RST 6.5 RST 5.5 INTR

Interrupts which are initiated by an I/O drive are a. internal b. external c. software d. all of above

Description : Interrupts which are initiated by an I/O drive are a. internal b. external c. software d. all of above

Last Answer : b. external

Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software r

Description : Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software

Last Answer : b. external

Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software

Description : Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software

Last Answer : d. software

The number of software interrupts in 8085 is ____ a) 5 b) 8

Description : The number of software interrupts in 8085 is ____ a) 5 b) 8

Last Answer : b) 8

What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? a. Bus control b. Interrupts c. Bus arbitration d. Status

Description : What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? a. Bus control b. Interrupts c. Bus arbitration d. Status

Last Answer : c. Bus arbitration

Which is used to store critical pieces of data during subroutines and interrupts: a. Stack b. Queue c. Accumulator d. Data register

Description : Which is used to store critical pieces of data during subroutines and interrupts: a. Stack b. Queue c. Accumulator d. Data register

Last Answer : a. Stack

n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW

Description : n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW

Last Answer : a) NMI

What are software interrupts? a) RST 0 - 7 b) RST 5.5 - 7.5 c) INTR, TRAP

Description : What are software interrupts? a) RST 0 - 7 b) RST 5.5 - 7.5 c) INTR, TRAP

Last Answer : a) RST 0

What are level Triggering interrupts? a) INTR&TRAP b)RST6.5&RST5.5 c)RST7.5&RST6.5

Description : What are level Triggering interrupts? a) INTR&TRAP b)RST6.5&RST5.5 c)RST7.5&RST6.5

Last Answer : b)RST6.5&RST5.5

Which of the following is hardware interrupts? a) RST5.5, RST6.5, RST7.5 b) INTR, TRAP c) a & b

Description : Which of the following is hardware interrupts? a) RST5.5, RST6.5, RST7.5 b) INTR, TRAP c) a & b

Last Answer : c) a & b

A job has four pages A, B, C, D and the main memory has two page frames only. The job needs to process its pages in following order: ABACABDBACD Assuming that a page interrupt occurs when a new page is brought in the main memory, irrespective of whether the page is swapped out or not. The number of page interrupts in FIFO and LRU page replacement algorithms are (A) 9 and 7 (B) 7 and 6 (C) 9 and 8 (D) 8 and 6

Description : A job has four pages A, B, C, D and the main memory has two page frames only. The job needs to process its pages in following order: ABACABDBACD Assuming that a page interrupt occurs when a new page is brought in the main ... replacement algorithms are (A) 9 and 7 (B) 7 and 6 (C) 9 and 8 (D) 8 and 6

Last Answer : (C) 9 and 8

List the four instructions which control the interrupt structure of the 8085 microprocessor.

Description : List the four instructions which control the interrupt structure of the 8085 microprocessor.

Last Answer : • DI ( Disable Interrupts ) • EI ( Enable Interrupts ) • RIM ( Read Interrupt Masks ) • SIM ( Set Interrupt Masks )

Serial port interrupt is generated, if ____ bits are seta) IE b) RI, IE c) IP, TI d) RI, TI

Description : Serial port interrupt is generated, if ____ bits are seta) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : d) RI, TI

The external device is connected to a pin called the ______ pin on the processor chip. a. Interrupt b. Transfer c. Both d. None of these

Description : The external device is connected to a pin called the ______ pin on the processor chip. a. Interrupt b. Transfer c. Both d. None of these

Last Answer : a. Interrupt

Which are the flags of status register: a. Over flow flag b. Carry flag c. Half carry flag d. Zero flag e. Interrupt flag f. Negative flag g. All of these

Description : Which are the flags of status register: a. Over flow flag b. Carry flag c. Half carry flag d. Zero flag e. Interrupt flag f. Negative flag g. All of these

Last Answer : g. All of these

The interrupt vector table of 80386 has been allocated ______ space starting from _______ to _______. a) 1Kbyte, 00000H, 003FFH b) 2Kbyte, 10000H, 004FFH c) 3Kbyte, 01000H, 007FFH d) 4Kbyte, 01000H, 009FFH

Description : The interrupt vector table of 80386 has been allocated ______ space starting from _______ to _______. a) 1Kbyte, 00000H, 003FFH b) 2Kbyte, 10000H, 004FFH c) 3Kbyte, 01000H, 007FFH d) 4Kbyte, 01000H, 009FFH

Last Answer : c) 3Kbyte, 01000H, 007FFH

Serial port vector address is of _______. And causes an interrupt when ________. a) 0013H, either TI or RI flag is set b) 0023H, either TI or RI flag is reset c) 0013H, either TI or RI flag is reset d) 0023H, either TI or RI flag is set

Description : Serial port vector address is of _______. And causes an interrupt when ________. a) 0013H, either TI or RI flag is set b) 0023H, either TI or RI flag is reset c) 0013H, either TI or RI flag is reset d) 0023H, either TI or RI flag is set

Last Answer : a) 0013H, either TI or RI flag is set

In 8051 an external interrupt 1 vector address is of ________ and causes of interrupt if ____. a) 000BH, a high to low transition on pin INT1 b) 001BH, a low to high transition on pin INT1 c) 0013H, a high to low transition on pin INT1 d) 0023H, a low to high transition on pin INT1

Description : In 8051 an external interrupt 1 vector address is of ________ and causes of interrupt if ____. a) 000BH, a high to low transition on pin INT1 b) 001BH, a low to high transition on pin INT1 c) 0013H, a high to low transition on pin INT1 d) 0023H, a low to high transition on pin INT1

Last Answer : a) 000BH, a high to low transition on pin INT1

In 8096 we have _____interrupt sources and _______ interrupt vectors. a) 18, 8 b) 21, 6 c) 21, 8 d) 16, 8

Description : In 8096 we have _____interrupt sources and _______ interrupt vectors. a) 18, 8 b) 21, 6 c) 21, 8 d) 16, 8

Last Answer : c) 21, 8

In 8051 which interrupt has highest priority? a)IE1 b)TF0 c)IE0 d)TF1

Description : In 8051 which interrupt has highest priority? a)IE1 b)TF0 c)IE0 d)TF1

Last Answer : a)IE1

Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Description : Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : a) IE

If ______ and ________ connections are made so that an error condition in 8087 can interrupt to the processor. a) BHE, RQ/GT1 b) BUSY, TEST c) INT, NMI d) RQ/GT0, RQ/GT1

Description : If ______ and ________ connections are made so that an error condition in 8087 can interrupt to the processor. a) BHE, RQ/GT1 b) BUSY, TEST c) INT, NMI d) RQ/GT0, RQ/GT1

Last Answer : c) INT, NMI

In 8279, a scanned sensor matrix mode, if a sensor changes its state, the ___ line goes ____ to interrupt the CPU. a) CS, high b) A0, high c) IRQ, high d) STB, high

Description : In 8279, a scanned sensor matrix mode, if a sensor changes its state, the ___ line goes ____ to interrupt the CPU. a) CS, high b) A0, high c) IRQ, high d) STB, high

Last Answer : c) IRQ, high

In 8096 we have _____interrupt sources and _______ interrupt vectors. a) 18, 8 b) 21, 6 c) 21, 8 d) 16, 8

Description : In 8096 we have _____interrupt sources and _______ interrupt vectors. a) 18, 8 b) 21, 6 c) 21, 8 d) 16, 8

Last Answer : c) 21,

In 8051 which interrupt has highest priority? a)IE1 b)TF0 c)IE0 d)TF1

Description : In 8051 which interrupt has highest priority? a)IE1 b)TF0 c)IE0 d)TF1

Last Answer : c)IE0

Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Description : Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : d) RI, TI

RIM is used to check whether, ______ a) The write operation is done or not b) The interrupt is Masked or not c) a & b

Description : RIM is used to check whether, ______ a) The write operation is done or not b) The interrupt is Masked or not c) a & b

Last Answer : b) The interrupt is Masked or not

What is SIM? a) Select Interrupt Mask b) Sorting Interrupt Mask c) Set Interrupt Mask.

Description : What is SIM? a) Select Interrupt Mask b) Sorting Interrupt Mask c) Set Interrupt Mask.

Last Answer : c) Set Interrupt Mask.

Which interrupt is not level sensitive in 8085? a) RST6.5 is a raising edge-trigging interrupt. b) RST7.5 is a raising edge-trigging interrupt. c) a & b.

Description : Which interrupt is not level sensitive in 8085? a) RST6.5 is a raising edge-trigging interrupt. b) RST7.5 is a raising edge-trigging interrupt. c) a & b.

Last Answer : b) RST7.5 is a raising edge-trigging interrupt.

Which interrupt has the highest priority? a) INTR b) TRAP c) RST6.5

Description : Which interrupt has the highest priority? a) INTR b) TRAP c) RST6.5

Last Answer : c) RST6.5

A computer programmer a. Dies all the thinking for a compute b. Can enter input data quickly c. Can operate all types of computer equipment d. Can draw only flowchart

Description : A computer programmer a. Dies all the thinking for a compute b. Can enter input data quickly c. Can operate all types of computer equipment d. Can draw only flowchart

Last Answer : a. Dies all the thinking for a compute

Personnel who design, program, operate and maintain computer equipment refers to a. Console-operator b. Programmer c. Peopleware d. System Analyst

Description : Personnel who design, program, operate and maintain computer equipment refers to a. Console-operator b. Programmer c. Peopleware d. System Analyst

Last Answer : c. Peopleware

A computer programmer a. Does all the thinking for a computer b. Can enter input data quickly c. Can operate all types of computer equipments d. Can draw only flowchart

Description : A computer programmer a. Does all the thinking for a computer b. Can enter input data quickly c. Can operate all types of computer equipments d. Can draw only flowchart

Last Answer : a. Does all the thinking for a computer

Which statement is valid about computer program? a. It is understood by a computer b. It is understood by programmer c. It is understood user d. Both of above

Description : Which statement is valid about computer program? a. It is understood by a computer b. It is understood by programmer c. It is understood user d. Both of above

Last Answer : d. Both of above

What is meant by polling?

Description : What is meant by polling?

Last Answer : Polling or device polling is a process which identifies the device that has interrupted the microprocessor.

What is meant by Wait State?

Description : What is meant by Wait State?

Last Answer : This state is used by slow peripheral devices. The peripheral devices can transfer the data to or from the microprocessor by using READYinput line. The microprocessor remains in wait state as long as READY ... contents of the address, address/data and control buses are held constant.

What is meant by a dedicated computer? a. which is used by one person only b. which is assigned to one and only one task c. which does one kind of software d. which is meant for application software only

Description : What is meant by a dedicated computer? a. which is used by one person only b. which is assigned to one and only one task c. which does one kind of software d. which is meant for application software only

Last Answer : d. which is meant for application software only

What is meant by a dedicated computer? a. Which is used by one person only b. Which is assigned one and only one task c. Which uses one kind of software d. Which is meant for application software

Description : What is meant by a dedicated computer? a. Which is used by one person only b. Which is assigned one and only one task c. Which uses one kind of software d. Which is meant for application software

Last Answer : d. Which is meant for application software

A modern electronic computer is a machine that is meant for a. Doing quick mathematical calculations b. Input, storage, manipulation and outputting of data c. Electronic data processing d. Performing repetitive tasks accurately

Description : A modern electronic computer is a machine that is meant for a. Doing quick mathematical calculations b. Input, storage, manipulation and outputting of data c. Electronic data processing d. Performing repetitive tasks accurately

Last Answer : b. Input, storage, manipulation and outputting of data

If you work with a transgendered programmer on programs meant for kids do you enforce normative gender roles?

Description : If you work with a transgendered programmer on programs meant for kids do you enforce normative gender roles?

Last Answer : answer:I know two transgender kids (both around 10 years old). Allowing for other is the right thing to do. We have moved beyond the male/female thing. It's also doesn't affect anyone's use ... If the vast majority are going to choose male or female, what does it matter that there is this option.

Which of the following is used only for data entry and storage, and never for processing? a. Mouse b. Dumb terminal c. Micro computer d. Dedicated data entry system

Description : Which of the following is used only for data entry and storage, and never for processing? a. Mouse b. Dumb terminal c. Micro computer d. Dedicated data entry system

Last Answer : b. Dumb terminal

In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Description : In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Last Answer : b. Input is never converted to digital form

There was a man, who never left his house. One day, he didn't feel good so he turned off all the lights and went to bed. Why did this cause a lot of people to die. -Riddles

Description : There was a man, who never left his house. One day, he didn't feel good so he turned off all the lights and went to bed. Why did this cause a lot of people to die. -Riddles

Last Answer : He lived int he lighthouse. Without the light from the lighthouse, ships crashed.