8086 microprocessor is interfaced to 8253 a programmable interval timer. The maximum number by which the clock frequency on one of the timers is divided by
a) 216 b) 28 c) 210 d) 220

1 Answer

Answer :

d) 220

Related questions

Description : Interfacing devices for DMA controller, programmable interval timer are respectively…a) 8257, 8253 b) 8253, 8257 c) 8257,8251 d)8251,825721.

Last Answer : a) 8257, 8253

Description : 8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64

Last Answer : a) 8

Description : In 8086 microprocessor one of the following statements is not true.a)Coprocessor is interfaced in MAX mode b)Coprocessor is interfaced in MIN mode c)I/O can be interfaced in MAX / MIN moded)Supports pipelining

Last Answer : b)Coprocessor is interfaced in MIN mode

Description : In 8086 microprocessor one of the following statements is not true. a) Coprocessor is interfaced in MAX mode b) Coprocessor is interfaced in MIN mode c) I/O can be interfaced in MAX / MIN mode

Last Answer : b) Coprocessor is interfaced in MIN mode

Description : Which system communicates with the outside word via the I/O devices interfaced to it: a. Microprocessor b. Microcomputer c. Digital computer d. All of these

Last Answer : b. Microcomputer

Description : What is the clock frequency of 8086 microprocessor?

Last Answer : MAximum clock frequency of 8086 is 5MHZ.

Description : Who was introduce the 80286 microprocessor updated on 8086,in 1983: a. Intel b. Motorola c. Fairchild d. None of these

Last Answer : a. Intel

Description : How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second

Last Answer : a. 2.5 Million instruction per second

Description : Which is 16 Bit microprocessor: a. 8088 b. 8086 c. 8085 d. All of these

Last Answer : d. All of these

Description : In 8086 microprocessor one of the following instructions is executed before an arithmeticoperation a. AAM b) AAD c) DAS d) DAA

Last Answer : b) AAD

Description : In 8086 microprocessor one of the following instructions is executed before an arithmetic operation a) AAM b) AAD c) DAS d) DAA

Last Answer : b) AAD

Description : 8088 microprocessor differs with 8086 microprocessor in a) Data width on the output b) Address capability c) Support of coprocessor d) Support of MAX / MIN mode

Last Answer : a) Data width on the output

Description : n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW

Last Answer : a) NMI

Description : BHE of 8086 microprocessor signal is used to interface the a) Even bank memory b) Odd bank memory c) I/O d) DMA

Last Answer : b) Odd bank memory

Description : Write an algorithm to subtract two 16 bit numbers (With borrow) in 8086 microprocessor.

Last Answer : Algorithm for 16 bit numbers subtraction with borrow: 1. Load 0000H into CX register (for borrow) 2. Load the first number into AX(accumulator) 3. Load the second number into BX register 4. Subtract ... . Move data from AX(accumulator) to memory 8. Move data from CX register to memory 9. Stop

Description : Enlist any four addressing modes of 8086 microprocessor.

Last Answer : Addressing modes of 8086 : 1. Immediate 2. Direct 3. Register 4. Register indirect 5. Indexed 6. Register relative 7. Based indexed 8. Relative based indexed 9. Implied

Description : State the use of OF and DF flags of 8086 microprocessor.

Last Answer : Overflow Flag: This flag is set if an overflow occurs, i.e. if the result of a signed operation is large enough to be accommodated in destination register. Direction Flag: It selects either increment or decrement mode for DI &/or SI register during string instructions.

Description : Describe the functions of General purpose registers of 8086 microprocessor.

Last Answer : (i) General Purpose Registers of 8086 1. AX (Accumulator) - Used to store the result for arithmetic / logical operations All I/O data transfer using IN & OUT instructions use A ... Index - acts as the destination for string movement instructions Used to hold offset address of Extra segment.

Description : The 16 bit flag of 8086 microprocessor is responsible to indicate ___________ A. the condition of result of ALU operation B. the condition of memory C. the result of addition D. the result of subtraction 

Last Answer : The 16 bit flag of 8086 microprocessor is responsible to indicate the condition of result of ALU operation

Description : In 8086 microprocessor , the address bus is ________ bit wide A. 12 bit B. 10 bit C. 16 bit D. 20 bit

Last Answer : In 8086 microprocessor, the address bus is 20 bit

Description : The intel 8086 microprocessor is a _______ processor A. 8 bit B. 16 bit C. 32 bit D. 4 bit

Last Answer : The intel 8086 microprocessor is a 16 bit processor 

Description : What is Microprocessor? Give the power supply & clock frequency of 8085

Last Answer : A microprocessor is a multipurpose, programmable logic device that reads binary instructions from a storage device called memory accepts binary data as input and processes data according ... provides result as output. The power supply of 8085 is +5V and clock frequency in 3MHz.

Description : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Last Answer : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Description : User programmable terminals that combine VDT hardware with built-in microprocessor is a. Kips b. PC c. Mainframe d. Intelligent terminals

Last Answer : d. Intelligent terminals

Description : Using 12 binary digits how many unique house addresses would be possible: a. 28=256 b. 212=4096 c. 216=65536 d. None of these

Last Answer : b. 212=4096

Description : 8253, 8257 c) 8257,8251 d)8251,825721.Consider the following set of 8085 instruction.MVI A,82HORA AJP DSPLYXRA ADSPLY:OUT PORT1HLT.The output at PORT1 isa) 00H b) FFH c) 92H d) 11H

Last Answer : a) 00H

Description : What does microprocessor speed depends on? a) Clock b) Data bus width c) Address bus width

Last Answer : c) Address bus width

Description : What are timers ? when when-timer-expired does not fire?

Last Answer : The When-Timer-Expired trigger can not fire during trigger, navigation, or transaction processing.

Description :  A sum of Rs 315 consists of 25 paise, 50 paise and 1 Re coins in the ratio 3 : 4 :6. What is the number of each kind of coin respectively? A) 216, 144, 27 B) 108, 144, 216 C) 27, 72, 216 D) 120, 35, 108 E) 102, 150, 210

Last Answer : Answer: B 25 paise = 25/100 Rs, 50 paise = 50/100 Rs So value ratio of these coins become = 3*(25/100) : 4*(50/100) : 6*(1) = 3/4 : 2 : 6 = 3 : 8 : 24 So 25 paise coins value= [3/(3+8+24)] * ... 100/50) = 144 So 1 paise coins value= [24/(3+8+24)] * 315 = Rs 216, so coins = 215 * (100/100) = 216

Description : Which processor provided 1 MB memory: a. 16-bit 8086 and 8088 b. 32-bit 8086 and 8088 c. 64-bit 8086 and 8088 d. 8-bit 8086 and 8088

Last Answer : a. 16-bit 8086 and 8088

Description : Intel used HMOS technology to recreate_____: a. 8084 A b. 8086 A c. 8085 A d. 8088 A

Last Answer : c. 8085 A

Description : .How many transistors does the 8086 have?a) 10,000b ) 29,000 c) 110,000d) 129,000

Last Answer : ) 29,000

Description : 8087 connection to 8086, to enable the _________ bank of memory _______pins are to be connected. a) Lower, BHE b) Upper, BHE c) Lower, INT d) Upper, INT.

Last Answer : a) Lower, BHE

Description : What is the output of the following code AL=00110101 BL= 39H M. Krishna Kumar/IISc. Bangalore M2/V1/June 04/1 Microprocessors and Microcontrollers/Assembly language of 8086 Multiple Choice Questions SUB AL, BL AAS ... , CF=1 b) BL=00000100, CF=0 c) AL=11111100 CF=1 d) BL= 00000100, CF=1

Last Answer : b) BL=00000100, CF=0

Description : In 8086 the overflow flag is set when a) The sum is more than 16 bits b) Signed numbers go out of their range after an arithmetic operation c) Carry and sign flags are set

Last Answer : b) Signed numbers go out of their range after an arithmetic operation

Description : In 8086, Example for Non maskable interrupts are a) Trapb) RST6.5 c) INTR

Last Answer : a) Trap

Description : Define memory segmentation. How memory segmentation is achieved in 8086? State advantages of memory segmentation.

Last Answer : Memory Segmentation: The memory in an 8086 microprocessor is organized as a segmented memory. The physical memory is divided into 4 segments namely, - Data segment, Code Segment, Stack Segment and Extra ... 16 bit size. 6) Programs and data can be stored separately from each other in segmentation.

Description : Blackt Electrotech 230V 24x7 Energy Saving Socket Type Digital Programmable Plastic Electronic Timer (White)

Last Answer : Buy from amazon: https://amzn.to/2SUTSdv Buy: http://bit.ly/2ZqlAkS

Description : Explain the role of watch dog timer in programmable logic controller.

Last Answer : Watch dog timer is a type of timer used to protect maloperation of PLC. It independently works( starts counting internal clock pulses) each time when PLC starts its execution. User program ... or some unknown condition, then watch dog timer overflows and generates nonmaskable interrupt to reset PLC.

Description : Which is the main feature of 8085: a. Internal clock generator b. Internal system controller c. Higher clock frequency d. All of these

Last Answer : d. All of these

Description : Which bit of TMOD will exactly configure timer / counter as a timer or counter. i) TMOD.6 of C/T for timer 1 ii) TMOD.6 of C/T for timer 0 iii) TMOD.2 of C/T for timer 0 iv) TMOD.2 of C/T for timer 1 a) i, ii b) ii, iv c) i, iii d) iii, iv

Last Answer : a) i, ii

Description : In serial communication modes, mode 1 the Baud rate = a) BR=2SMOD/32 * (Timer 0 over flow rate) b) BR=2SMOD/16 * (Timer 1 over flow rate) c) BR=2SMOD/16 * (Timer 0 over flow rate) d) BR=2SMOD/32 * (Timer 1 over flow rate)

Last Answer : b) BR=2SMOD/16 * (Timer 1 over flow rate)

Description : What is the function of watchdog timer? a) The watchdog Timer is an external timer that resets the system if the software fails to operate properly. b) The watchdog Timer is an internal timer ... internal timer that resets the system if the software fails to operate properly. d) None of them

Last Answer : b) The watchdog Timer is an internal timer that sets the system if the software fails to operate properly.

Description : What is the function of watchdog timer? a) The watchdog Timer is an external timer that resets the system if the software fails to operate properly. b) The watchdog Timer is an internal timer ... internal timer that resets the system if the software fails to operate properly. d) None of them

Last Answer : c) The watchdog Timer is an internal timer that resets the system if the software fails to operate properly.

Description : Which one of the following input device is user-programmable? a. Dumb terminal b. Smart terminal c. VDT d. Intelligent terminal

Last Answer : d. Intelligent terminal

Description : A small or intelligent device is so called because it contains within it a a. Computer b. Microcomputer c. Programmable d. Sensor

Last Answer : d. Sensor

Description : EEPROM stand for a. Electrically Erasable Programmable Read Only Memory b. Easily Erasable Programmable Read Only Memory c. Electronic Erasable Programmable Read Only Memory d. None of the above

Last Answer : a. Electrically Erasable Programmable Read Only Memory

Description : PROM stands for: a. Programmable read-only memory

Last Answer : a. Programmable read-only memory

Description : Indian Meteorological Department declared “Super Cyclone” (a) When the wind blows at a speed of more than 216 kmph (b) When the wind blows at a speed of more than 220 kmph (c) When the wind blows at a speed of more than 194 kmph (d) When the wind blows at a speed of more than 172 kmph

Last Answer : (b) When the wind blows at a speed of more than 220 kmph