# In serial communication modes, mode 1 the Baud rate = a) BR=2SMOD/32 * (Timer 0 over flow rate) b) BR=2SMOD/16 * (Timer 1 over flow rate) c) BR=2SMOD/16 * (Timer 0 over flow rate) d) BR=2SMOD/32 * (Timer 1 over flow rate)

In serial communication modes, mode 1 the Baud rate =
a) BR=2SMOD/32 * (Timer 0 over flow rate)
b) BR=2SMOD/16 * (Timer 1 over flow rate)
c) BR=2SMOD/16 * (Timer 0 over flow rate)
d) BR=2SMOD/32 * (Timer 1 over flow rate)

b) BR=2SMOD/16 * (Timer 1 over flow rate)

## Related questions

Description : In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Last Answer : a) 1, 8bit, single processor

Description : In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Last Answer : c) 2, 9 bit, multiple processors

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

Description : How many synchronous and asynchronous modes are there in serial port of 8096? M. Krishna Kumar/IISc. Bangalore M5/V1/June 04/1 Microprocessors and Microcontrollers/ Multiple Choice Questions Architecture of Micro ... 2, 2 respectively b) 3,1 respectively c) 1, 3 respectively d) 1, 2 respectively

Last Answer : c) 1, 3 respectively

Description : In 8255, under the I/O mode of operation we have __ modes. Under which mode will have the following features i) A 5 bit control port is available. ii) Three I/O lines are available at Port C. a) 3, Mode2 b) 2, Mode 2 c) 4, Mode 3 d) 3, Mode 2

Last Answer : a) 3, Mode2

Description : In modes 2 and 3, if _____ bit of SCON bit is set will causes enable multiprocessor communication and is of ____ bit address. a) SM1, 9EH b) TB8 , 9CH c) SM2 , 9DH d) SM0, 9FH

Last Answer : c) SM2 , 9DH

Description : Which bit of TMOD will exactly configure timer / counter as a timer or counter. i) TMOD.6 of C/T for timer 1 ii) TMOD.6 of C/T for timer 0 iii) TMOD.2 of C/T for timer 0 iv) TMOD.2 of C/T for timer 1 a) i, ii b) ii, iv c) i, iii d) iii, iv

Last Answer : a) i, ii

Description : Interfacing devices for DMA controller, programmable interval timer are respectively…a) 8257, 8253 b) 8253, 8257 c) 8257,8251 d)8251,825721.

Last Answer : a) 8257, 8253

Description : What is the function of watchdog timer? a) The watchdog Timer is an external timer that resets the system if the software fails to operate properly. b) The watchdog Timer is an internal timer ... internal timer that resets the system if the software fails to operate properly. d) None of them

Last Answer : b) The watchdog Timer is an internal timer that sets the system if the software fails to operate properly.

Description : 8086 microprocessor is interfaced to 8253 a programmable interval timer. The maximum number by which the clock frequency on one of the timers is divided by a) 216 b) 28 c) 210 d) 220

Description : What is the function of watchdog timer? a) The watchdog Timer is an external timer that resets the system if the software fails to operate properly. b) The watchdog Timer is an internal timer ... internal timer that resets the system if the software fails to operate properly. d) None of them

Last Answer : c) The watchdog Timer is an internal timer that resets the system if the software fails to operate properly.

Description : Which processor provided 1 MB memory: a. 16-bit 8086 and 8088 b. 32-bit 8086 and 8088 c. 64-bit 8086 and 8088 d. 8-bit 8086 and 8088

Last Answer : a. 16-bit 8086 and 8088

Description : Calculator are based on______ microprocessor: a. 4 bit b. 16 bit c. 32 bit d. 64 bit

Last Answer : a. 4 bit

Description : How many bit microprocessor still survives in low-end application such as microwave ovens and small control system: a. 4 bit b. 16 bit c. 32 bit d. 64 bit

Last Answer : a. 4 bit

Description : How many bit MC6800 microprocessor: a. 4-bit b. 8-bit c. 16-bit d. 32-bit

Description : How many bit microprocessor in the era marked beginning of fourth generation: a. 4 bit b. 8 bit c. 16 bit d. 32 bit

Last Answer : d. 32 bit

Description : Because we wish to allow each ASCII code to occupy one location in memory, most memories are _____ addressable. a. BYTE b. NIBBLE c. WORD (16 bits) d. DOUBLEWORD (32 bits)

Description : A 32-bit address bus allows access to a memory of capacity(a) 64 Mb (b) 16 Mb (c) 1Gb (d) 4 Gb 2.Which processor structure is pipelined? a) all x80 processors b) all x85 processors c) all x86 processors

Last Answer : c) all x86 processors

Description : The Width of a processor’s data path is measured in bits. Which of the following are common data paths? a. 8 bits b. 12 bits c. 16 bits d. 32 bits

Last Answer : a. 8 bits

Description : EBCDIC can code up to how many different characters? a. 256 b. 16 c. 32 d. 64

Description : How many bit of MAR register: a. 8-bit b. 16-bit c. 32-bit d. 64-bit

Description : The processor 80386/80486 and the Pentium processor uses _____ bits address bus: a. 16 b. 32 c. 36 d. 64

Description : The 8279 normally provides a maximum of _____ seven segment display interface with CPU. a) 8 b) 16 c) 32 d) 18

Description : The intel 8086 microprocessor is a _______ processor A. 8 bit B. 16 bit C. 32 bit D. 4 bit

Last Answer : The intel 8086 microprocessor is a 16 bit processor

Description : What is the use of addressing modes, mention the different types

Last Answer : The various formats of specifying the operands are called addressing modes, it is used to access the operands or data. The different types are as follows • Immediate addressing • Register addressing • Direct addressing • Indirect addressing • Implicit addressing

Description : 80386 support overall ___ addressing modes to facilitate efficient execution of higher level language programs. a) 9 b) 10 c) 11 d) 12

Description : Enlist any four addressing modes of 8086 microprocessor.

Last Answer : Addressing modes of 8086 : 1. Immediate 2. Direct 3. Register 4. Register indirect 5. Indexed 6. Register relative 7. Based indexed 8. Relative based indexed 9. Implied

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Description : Serial port interrupt is generated, if ____ bits are seta) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : d) RI, TI

Description : A storage device whe3re the access time is depended upon the location of the data is a. Random access b. Serial access c. Sequential access d. Transaction access

Last Answer : b. Serial access

Description : A kind of serial dot-matrix printer that forms characters with magnetically-charged ink sprayed dots is called a. Laser printer b. Ink-jet printer c. Drum printer d. Chan printer

Last Answer : d. Chan printer

Description : The system unit of a personal computer typically contains all of the following except: a. Microprocessor b. Disk controller c. Serial interface d. Modem

Description : Serial port vector address is of _______. And causes an interrupt when ________. a) 0013H, either TI or RI flag is set b) 0023H, either TI or RI flag is reset c) 0013H, either TI or RI flag is reset d) 0023H, either TI or RI flag is set

Last Answer : a) 0013H, either TI or RI flag is set

Description : Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Description : Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a ... math computations. a) i & iii b) ii & iii c) iii only. d) i only.

Last Answer : c) iii only.

Description : Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : d) RI, TI

Description : __ bit in ICW1 indicates whether the 8259A is cascade mode or not? a) LTIM=0 b) LTIM=1 c) SNGL=0 d) SNGL=1

Description : Is the total useful information processed or communicated over a specific amount of time A. Baud rate B. Bit rate C. Information theory D. Throughput

Description : n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW

Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Last Answer : (B) 3 bits/baud

Description : List the applications of 555 timer in Astable mode of operation

Last Answer : *FSK generator  *Pulse-position modulator

Description : List the applications of 555 timer in monostable mode of operation

Last Answer : *missing pulse detector *Linear ramp generator *Frequency divider *Pulse width modulation.

Description : In asynchronous serial communication the physical layer provides ___________ a. start and stop signalling b. flow control c. both start & stop signalling and flow control d. only start signalling

Last Answer : c. both start & stop signalling and flow control

Description : In 8086 microprocessor one of the following statements is not true.a)Coprocessor is interfaced in MAX mode b)Coprocessor is interfaced in MIN mode c)I/O can be interfaced in MAX / MIN moded)Supports pipelining

Last Answer : b)Coprocessor is interfaced in MIN mode

Description : The mode of DMA are: a. Single transfer b. Block transfer c. Burst –block transfer d. Repeated single transfer e. Repeated–block transfer f. Repeated Burst –block transfer g. All of these

Last Answer : g. All of these

Description : Virtual Mode Flag bit can be set using ____ instruction or any task switch operation only in the _____ mode a) IRET, Virtual b) POPF, Real c) IRET, protected d) POPF, protected

Last Answer : b) POPF, Real

Description : In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode

Last Answer : c) bus width select

Description : 8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option ... b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Last Answer : c) EA, high, external, internal

Description : Which of the following statements on DRAM are correct? i) Page mode read operation is faster than RAS read. ii) RAS input remains active during column address strobe. iii) The row and column addresses are strobed into the ... RAS and CAS inputs respectively. a) i & iii b) i & ii c) all d) iii