In microcontroller and LCD interface which line will instruct the LCD that microcontroller is sending data?
a) DB0 b) RW c) EN d) RS

1 Answer

Answer :

d) RS

Related questions

Description : Interfacing LCD with 89C51 _____ data lines are used along with the _____ signals. a) 6, RS, RW b) 5, RW, EN c) 8, RS, EN, RW d) 9, RS, EN, RW

Last Answer : a) 6, RS, RW

Description : Which is the type of memory for information that does not change on your computer? a. RAM b. ROM c. ERAM d. RW / RAM

Last Answer : b. ROM

Description : Draw interfacing of 16 × 2 LCD with 8051 and state the function of EN and RS of LCD

Last Answer : Diagram: RS: RS is the register select pin. We need to set it to 1, if we are sending some data to be displayed on LCD. And we will set it to 0 if we are sending some command instructions ... the LCD to latch in the data present at the data pins. This pulse must be a minimum of 450ns wide.

Description : CISC stands for: a. Complex instruction set computer b. Camper instruct set of computer c. Compared instruction set computer d. None of these

Last Answer : a. Complex instruction set computer

Description : RISC stands for: a. Reduced Instruction set computer b. Reduced Instruct set compare c. Reduced instruction stands computer d. All of these 107. DEC stands for:

Last Answer : a. Reduced Instruction set computer

Description : ISA stands for: a. Instruct set area b. Instruction set architecture c. Both a and b d. None of these

Last Answer : b. Instruction set architecture

Description : What is Microcontroller and Microcomputer

Last Answer : Microcontroller is a device that includes microprocessor; memory and I/O signal lines on a single chip, fabricated using VLSI technology. Microcomputer is a computer that is designed using microprocessor as its CPU. It includes microprocessor, memory and I/O.

Description : In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Last Answer : a) 1, 8bit, single processor

Description : Intel 8096 is of ___ bit microcontroller family called as ______. a) 8, MCS51 b) 16, MCS51 c) 8, MCS96 d) 16, MCS96

Last Answer : d) 16, MCS96

Description : The 8051 microcontroller is of ___pin package as a ______ processor. a) 30, 1byte b) 20, 1 byte c) 40, 8 bit

Last Answer : c) 40, 8 bit

Description : In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Last Answer : c) 2, 9 bit, multiple processors

Description : Intel 8096 is of ___ bit microcontroller family called as ______. a) 8, MCS51 b) 16, MCS51 c) 8, MCS96 d) 16, MCS96

Last Answer : d) 16, MCS96

Description : The 8051 microcontroller is of ___pin package as a ______ processor. a) 30, 1byte b) 20, 1 byte c) 40, 8 bit d) 40, 8 byte

Last Answer : c) 40, 8 bit

Description : What is the difference between a microcontroller and a microprocessor?

Last Answer : Compare microprocessor and microcontroller Microprocessor Microcontroller 1)Inbuilt RAM and ROM 1)Do not have inbuilt RAM or ROM 2)Inbuilt timer 2)Doesn't have inbuilt timer ... same memory 6)Many Multifunction pins on the IC  6)less multifunction Pins on IC.

Description : Draw the labeled interfacing diagram to interface relay with 89C51 microcontroller.

Last Answer : the labeled interfacing diagram to interface relay with 89C51 microcontroller

Description : GUI stands for: a. Graphical user interface b. Graph used Intel c. Graphical use inter d. None of these

Last Answer : a. Graphical user interface

Description : Interface electronic circuit is used to interconnect I/O devices to a computer’s CPU or a. ALU b. Memory c. Buffer d. Register

Last Answer : b. Memory

Description : The system unit of a personal computer typically contains all of the following except: a. Microprocessor b. Disk controller c. Serial interface d. Modem

Last Answer : d. Modem

Description : Which of the following magazines covers only the IBM PC and its compatibles? a. Byte b. PC Magazine c. Personal Computing d. Interface Age

Last Answer : b. PC Magazine

Description : How bit microprocessor inexpensive a separate interface is provided with I/O device: a. 2 bit b. 4 bit c. 8 bit d. 32 bit

Last Answer : c. 8 bit

Description : The microcomputer system by using the ____device interface: a. Input b. Output c. Both A and B d. None of these

Last Answer : c. Both A and B

Description : The 8279 normally provides a maximum of _____ seven segment display interface with CPU. a) 8 b) 16 c) 32 d) 18

Last Answer : a) 8

Description : BHE of 8086 microprocessor signal is used to interface the a) Even bank memory b) Odd bank memory c) I/O d) DMA

Last Answer : b) Odd bank memory

Description : ___________ is a device in data transmission to interface data terminal equipment to an analogue transmission line. A. RS 232 B. Connector C. Modem D. RJ-11 plug

Last Answer : C. Modem

Description : Which of the following conditions is not allowed in an RS latch? a. R is asserted, S is asserted b. R is asserted, S is negated c. R is negated, S is asserted d. R is negated, S is negated

Last Answer : a. R is asserted, S is asserted

Description : Of the following circuits, the one which involves storage is a. RS Latch b. mux c. nand d. decoder

Last Answer : a. RS Latch

Description : A CD-RW disk- 1) Has a faster access than an internal disk 2) Is a form of optical disk, so it can only be written once 3) Holds less data than a floppy disk 4) Can be erased and rewritten

Last Answer : 4) Can be erased and rewritten

Description : Which media have the ability to have data/information stored (written) on them by users more than once? 1) CD-R disks 2) CD-RW disks 3) Zip disks 4) Optical Disks

Last Answer : 2) CD-RW disks

Description : Which media have the ability to have data/information stored (written) on them by users more than once? 1 CD-R disks 2 CD-RW disks 3 Zip disks 4 Optical Disks

Last Answer : 2 CD-RW disks

Description : Which most popular input device is used today for interactive processing and for the one line entry of data for batch processing? a. Mouse b. Magnetic disk c. Visual display terminal d. Card punch

Last Answer : a. Mouse

Description : In the third generation of computers: a. Distributed data processing first became popular b. An operating system was first developed c. High-level prcedu7ral languages were firs used d. On-line, real time systems first became popular

Last Answer : d. On-line, real time systems first became popular

Description : In 8279 Strobed input mode, the control line goes low. The data on return lines is strobed in the ____. a) FIFO byte by byte b) FILO byte by byte c) LIFO byte by byte d) LILO byte by byte.

Last Answer : a) FIFO byte by byte

Description : Which instruction of 8051 microcontroller is used for reading data from code memory?  A) Mov B) MOVC C) MOVX D) XCH

Last Answer : Mov

Description : How does the microprocessor differentiate between data and instruction

Last Answer : When the first m/c code of an instruction is fetched and decoded in the instruction register, the microprocessor recognizes the number of bytes required to fetch the entire ... will be considered as data & the byte after the data will be treated as the next instruction.

Description : What are operations performed on data in 8085

Last Answer : The various operations performed are • Store 8-bit data • Perform arithmetic and logical operations • Test for conditions • Sequence the execution of instructions • Store data temporarily during execution in the defined R/W memory locations called the stack

Description : ___ memory system which is discussed later can improve matters in this respect: a. Data memory b. Cache memory c. Memory d. None of these

Last Answer : b. Cache memory

Description : Which is an integral part of any microcomputer system and its primary purpose is to hold program and data: a. Memory unit b. Register unit c. A and B d. None of these

Last Answer : a. Memory unit

Description : System Bus Contains: a. Address Bus b. Data Bus c. Control Bus d. All of these

Last Answer : d. All of these

Description : When the RET instruction at the end of subroutine is executed, a. the information where the stack is iniatialized is transferred to the stack pointer b. the memory address of the RET instruction is ... two data bytes stored in the top two locations of the stack are transferred to the stack pointer

Last Answer : c. two data bytes stored in the top two locations of the stack are transferred to the program counter

Description : The ascending order or a data Hierarchy is a. bit - bytes - fields - record - file - database b. bit - bytes - record - field - file - database c. bytes - bit- field - record - file - database d. bytes -bit - record - field - file - database

Last Answer : a. bit - bytes - fields - record - file - database

Description : What is the control unit's function in the CPU? a. To transfer data to primary storage b. to store program instruction c. to perform logic operations d. to decode program instruction

Last Answer : b. to store program instruction

Description : CPU does not perform the operation a. data transfer b. logic operation c. arithmetic operation d. all of above

Last Answer : b. logic operation

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory Address Register b. Memory Data Register c. Instruction Register d. Program Register

Last Answer : d. Program Register

Description : Where does a computer add and compare data? a. Hard disk b. Floppy disk c. CPU chip d. Memory chip

Last Answer : c. CPU chip

Description : The ________ ensures that only one IC is active at a time to avoid a bus conflict caused by two ICs writing different data to the same bus.A.control busB.control instructionsC. address decoder D.CPU

Last Answer : C. address decoder

Description : The first firm to mass-market a microcomputer as a personal computer was a. IBM b. Super UNIVAC c. Radio Shaks d. Data General Corporation

Last Answer : c. Radio Shaks

Description : In the third Generation of computers a. Distributed data processing first became popular b. An operating system was first developed c. High level procedural language were first used d. Online real time systems first become popular

Last Answer : d. Online real time systems first become popular

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Last Answer : d. Program counter

Description : Which of the following registers is loaded with the contents of the memory location pointed by the PC? a. Memory address register b. Memory data register c. Instruction registers d. Program counter

Last Answer : c. Instruction registers

Description : The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called a. ASCII b. EBCDIC c. BCD d. All of above

Last Answer : a. ASCII