_______ electric power is the most common method used by electrical grids to transfer power. 

(A) One-phase (B) Two-phase (C) Three-phase (D) None of the above

1 Answer

Answer :

Three-phase electric power is the most common method used by electrical grids to transfer power. 

Related questions

Description : Maximum Power Transfer Theorem 1

Last Answer : Maximum Power Transfer Theorem 1

Description : State maximum power transfer theorem for DC circuit.

Last Answer : Maximum power transfer theorem for DC circuit: The maximum power transfer theorem states that the source or a network transfers maximum power to load only when the load resistance is equal ... removed (disconnected) ii) All internal independent sources are replaced by their internal resistances.

Description : The reactive power transfer over a line mainly depends on

Last Answer : The reactive power transfer over a line mainly depends on lVsl- lVRl

Description : For maximum transfer of power, internal resistance of the source should be?

Last Answer : For maximum transfer of power, internal resistance of the source should be equal to load resistance.

Description : The transfer of energy for reaction turbines is based on _______ A) Newton’s first law B) Newton’s second law C) Newton’s third law D) All the above

Last Answer : The transfer of energy for reaction turbines is based on Newton’s third law

Description : State the importance of electrical power in day to day life. 

Last Answer : Importance of electrical power in day to day life: 1. Electrical energy is the basic necessity for domestic (residency), commercial, industrial, agriculture, consumers , transport (Electric ... agriculture products. iv) Running motors, furnaces of various kinds in industry, running locomotives 

Description : Problems on electrical power and energy

Last Answer : Problem on electrical power and energy 1 : https://youtu.be/ZvWHuMdmv9g Problem on electrical power and energy 2 : https://youtu.be/19IZMc6U2vs Problem on electrical power and energy 3 : https ... : https://youtu.be/iYqGIwA919A Problem on electrical power and energy : https://youtu.be/iWnWQz_mzHk

Description : Problem on electrical power and energy 2

Last Answer : Problem on electrical power and energy 2

Description : Problem on electrical power and energy 1

Last Answer : Problem on electrical power and energy 1

Description : Problem on electrical power and energy 7

Last Answer : Problem on electrical power and energy 7

Description : Problem on electrical power and energy 6

Last Answer : Problem on electrical power and energy 6

Description : Problem on electrical power and energy 5

Last Answer : Problem on electrical power and energy 5

Description : List any two types of fuels used in electrical power generation plants.

Last Answer : Types of fuels used in electrical power generation plants:  1) Solid fuels: Coal, Biomass: Wood, Nuclear fuel: Uranium, Plutonium  2) Liquid fuels: Diesel, Petrol  3) Gaseous Fuels: Natural gas, Producer ... 2) Wood 3) Uranium 4) Plutonium 5) Diesel 6) Petrol 7) Natural gas 8) Producer gas

Description : When an alternating current passes through an ohmic resistance the electrical power converted into heat is?

Last Answer : When an alternating current passes through an ohmic resistance the electrical power converted into heat is true power.

Description : Power factor of an electrical circuit is equal to?

Last Answer : Power factor of an electrical circuit is equal to R/Z, cosine of phase angle difference between current and voltage, kW/kVA.

Last Answer : The electrical power to a meggar is provided by permanent magnet D.C. generator.

Description : For high efficiency of transfer of power, internal resistance of the source should be?

Last Answer : For high efficiency of transfer of power, internal resistance of the source should be less than the load resistance.

Description : Briefly explain how the power factor of an inductive circuit can be improved.

Last Answer : As we know that power factor should be corrected to ensure that the current supplied is cost friendly. Meaning the power factor should be around one but not greater than one(0.8-0.9) in a ... an inductive circuit due to the inductive reactance which oppose the change of current in the ac circuit. 

Description : An _____________is a network of electrical components used to supply, transfer and use electric power:  (A) Electric power system (B) Electric power (C) All of the above (D) None of the above

Last Answer : An Electric power system is a network of electrical components used to supply, transfer and use electric power.

Description : Mention The Steps In The Interrupt Driven Mode Of Data Transfer.?

Last Answer : Answer :The steps followed in this type of transfer are as follows: The peripheral device would request for an interrupt. The request acknowledgement for the transfer is issued at the end of ... coordinates by the ISS. Again the Interrupt system is enabled and the above steps are repeated.

Description : How to Write a Job Transfer Request ?

Last Answer : How to Write a Job Transfer Request No matter which type of industry you are in, there may come a point in your career when you would not want to settle for the current position that you have at ... push that your boss needs to finally take notice of the work that you have been doing in the past.

Description : Heat Transfer Software

Last Answer : The process of heat transfer is used in many industries - the scientific industry, engineering industry and every industry you can possibly think of that uses thermal heat. Because of this, there is a need ... group, so you won't have to go through the hassle of copying information down for others.

Description : Heat Transfer Machines

Last Answer : Heat transfer machines are just the thing you need in order to do heat transfers on your clothing or whatever surface you want to decorate. In order for you to stick designs and precious stones on porous and ... is best. This will also give you an idea of what kind of designs you can choose from.

Description : Heat Transfer Experiments

Last Answer : Heat transfer experiments are basically experiments that deal with temperature, its characteristics and qualities. Heat transfer experiments are done for many purposes, but mainly to do investigations on the ... three are learned, it helps to have a better understanding of heat transfers as well.

Description : Fuel Transfer Pumps

Last Answer : A fuel transfer pump is used to move fuel from one container to another. These pumps are used to fuel cars, planes, agricultural equipment and other devices. They are typically used to transfer diesel and ... for quicker fueling. These models may cost more, but they will make your job a lot easier.

Description : How to transfer an apartment to a non-residential fund?

Last Answer : Can a private entrepreneur use his apartment as an office? The answer to this question depends on the type of activity. To sew, write poetry, fill out accounting documents, engage in tutoring, write ... is unacceptable. If you are not satisfied with this decision, you can appeal it in court.

Description : Calculate the rate of heat transfer by radiation from an unlagged steam pipe, 50 mm o.d. at 393K to air at 293K emissivity e = 0.9.

Last Answer : Rate of heat transfer by radiation Assume length of pipe = 1 m

Description : Give the unit of overall heat transfer coefficient in SI and MKS.

Last Answer : Unit of overall heat transfer coefficient 1. In SI : W/m2K 2. In MKS : kcal/hr m2K

Description : Define film heat transfer coefficient.

Last Answer : Film heat transfer coefficient: Film heat transfer coefficient h is defined as the quantity of heat transferred in unit time through unit area at a temperature difference of 10 between the surface and surrounding.

Description : Define steady state heat transfer.

Last Answer : Steady state heat transfer: Heat transfer where temperature remains same with respect to time and the rate of heat transfer does not vary with time.

Description : Transfer switch

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : A transfer function has a second order denominator and constant gain in the numerator

Last Answer : A transfer function has a second order denominator and constant gain in the numerator the system has two zeros at infinity

Description : With the knowledge of the state variable representation of a plant the transfer function of the plant 

Last Answer : With the knowledge of the state variable representation of a plant the transfer function of the plant can be determined completely

Description : Explain data transfer mechanism in I2C protocol. Compare it with CAN and USB protocol based on bit rate and area of applications.

Last Answer : I2C (Inter-Integrated Circuit): I2C stands for Inter-Integrated Circuit. I2C is a serial protocol. It was developed by Philips Semiconductor. I2C bus have two communication lines. One is serial data ( ... Mbps this is used for lower speed devices. Using USB we can connect upto 127 devices.

Description : Explain with reason through which side of shell and tube heat exchanges, the following liquids are directed. (i) viscous liquid (ii) high pressure liquid (iii) corrosive liquid

Last Answer : Viscous liquid : Viscous liquid is passed through shell side Reason: because of the presence of baffles in the shell induce turbulence and hence increases heat transfer rate. High pressure liquid: High ... To avoid expensive alloy shells (in order to save the cost of expensive material for shell).

Description : With neat sketch explain the construction and working of heat exchanger used for handling corrosive liquid.

Last Answer : Graphite block heat exchanger:   Graphite heat exchangers are well suited for handling corrosive fluids. Graphite is inert towards most corrosive fluids and has very high thermal conductivity. Graphite being ... vertical faces direct the service fluid through the exchanger in a cross flow.

Description : Explain the type of multiple effect evaporator feed arrangement used for handling viscous liquid.

Last Answer : Backward feed arrangement  If the liquid is very viscous, then we have to adopt backward feed arrangement. In this arrangement, the feed solution and vapour flow is in opposite direction. Fresh feed is ... Not very common as it need pump. At low values of feed temperature higher economy.

Description : Explain Wilson plot.

Last Answer : Wilson Plot: The Wilson plot method was developed by Wilson in 1915 to evaluate the convection coefficients in shell and tube condensers for the case of a vapour condensing outside by means of ... resistance and the remaining thermal resistances participating in the heat transfer process.

Description : Explain Kirchhoff’s Law with its mathematical expression in detail.

Last Answer : Kirchoff's law of radiation: Kirchoff's law: It states that at equilibrium temperature, the ratio of total emissive power of any body to absorptivity depends only upon the temperature of the body. ... respectively. At thermal equilibrium, absorption and emission rates are equal, thus,

Description : With a neat diagram explain the construction of calendria type evaporator.

Last Answer : Calendria type(Short tube) evaporator: Construction: It consists of vertical cylindrical shell incorporating short vertical tube bundle with horizontal tube sheet. Vapour inlet is provided at top ... sheet, while non condensable gas is vented to atmosphere from point near top tube sheet.

Description : Draw a neat labelled diagram of 1-2 shell and tube heat exchanger. 

Last Answer : 1-2 shell and tube heat exchanger: 

Description : Define the following terms : (i) absorptivity (ii) reflectivity (iii) transmissivity (iv) emissivity

Last Answer : Absorptivity: It is the fraction of total incident radiation which is absorbed by a body. Reflectivity: It is the fraction of total incident radiation which is reflected by a body.  Transmissivity: It ... total emissive power of a body to emissive power of a black body at the same temperature. 

Description : Explain the properties of solution that influences evaporation.

Last Answer : Properties of evaporating liquid 1. Concentration: As the concentration increases, the solution becomes more and more individualistic. The viscosity and density increase with solid content. The boiling point of ... is a problem, special materials such as copper, nickel, stainless steel may be used.

Description : Explain the concept of optimum thickness of insulation.

Last Answer : Optimum thickness of insulation: The optimum thickness of an insulation is obtained by purely economic approach. The greater the thickness, the lower the heat loss & the greater the initial cost of ... sum values of heat lost and annual fixed charges) of the insulation is minimum. 

Description : Give expression for the following and explain the terms involved. (i) Nusselt number (ii) Prandtl number

Last Answer : 1. Nusselt NumberNNU= hd/k  h – fim heat transfer coefficient  d - diameter of pipe  k – thermal conductivity of fluid 2. Prandtl Number NPR -Cp µ/k Cp– specific heat of fluid µ - viscosity of fluid  k – thermal conductivity

Description : Define capacity and economy of evaporator.

Last Answer : The capacity of an evaporator is defined as the number of kilogram of water evaporated per hour. The economy of an evaporator is defined as the number of kilogram of water evaporated per kilogram of steam fed to the evaporator.

Description : Name any four types of shell and tube heat exchanger.

Last Answer : Four types of shell and tube heat exchanger: 1. Fixed tube heat exchanger 2. Floating head heat exchanger 3. U- tube type heat exchanger 4. Kettle/ Reboiler type heat exchanger

Description : Define radiation and give one example.

Last Answer : Radiation: Radiation is transfer of energy through space by electromagnetic waves. If radiation is passing through empty space, it is not transformed into other forms of energy, nor is it diverted from its ... only the absorbed energy that appears as heat. Example: Loss of heat from unlagged pipe. 

Description : kWh meter is the electric meter that measures the amount of electrical _________ in kWh that was consumed in the house.  (A) Energy (B) Current (C) Voltage (D) None of the above

Last Answer : kWh meter is the electric meter that measures the amount of electrical Energy in kWh that was consumed in the house. 

Description : State elements of diesel electric power plant with their functions. 

Last Answer : Elements of Diesel Power Plant with their function):   1) Diesel Engine: - This is the main component of the P.P. which develops mechanical power. 2) Engine air intake system: - Air ... fuel as per requirement. 10) Alternator: - Its function is to convert mechanical power into electrical power.