Increasing the number of turns of wire on the secondary of a transformer will

Increasing the number of turns of wire on the secondary of a transformer will 

(A) Decrease the secondary current (B) Increase the primary current (C) Have no effect on the secondary current (D) Increase the secondary current
by

1 Answer

Answer :

Increasing the number of turns of wire on the secondary of a transformer will Decrease the secondary current 

by

Related questions

lt the length, number of turns and area of a coil are doubled, the inductance of the coil

Description : lt the length, number of turns and area of a coil are  doubled, the inductance of the coil

Last Answer : lt the length, number of turns and area of a coil are  doubled, the inductance of the coil is quadrupled

A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts

Description : A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts applied to the primary. What is the voltage across the secondary?  (A) 30 Volts (B) 480 Volts (C) 120 Volts (D) 60 Volts

Last Answer : A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts applied to the primary. What is the voltage across the secondary?  (A) 30 Volts (B) 480 Volts (C) 120 Volts (D) 60 Volts

does the high voltage side of Transformer winding have more number of turns?

Last Answer : yes High Voltage side of Transformer winding have more number of turns. and low voltage side of Transformer winding have less number of turns.

Which winding in a transformer has more number of turns ?

Last Answer : High voltage winding in a transformer has more number of turns.

In a power or distribution transformer about 10 percent end turns are heavily insulated?

Last Answer : In a power or distribution transformer about 10 percent end turns are heavily insulated to withstand the high voltage drop due to line surge produced by the shunting capacitance of the end turns.

When secondary of a current transformer is open-circuited its iron core will be?

Description : When secondary of a current transformer is open-circuited its iron core will be?

Last Answer : When secondary of a current transformer is open-circuited its iron core will be hot because of heavy iron losses taking place in it due to high flux density.

The secondary of a current transformer is always short-circuited under operating conditions because it?

Description : The secondary of a current transformer is always short-circuited under operating conditions because it?

Last Answer : The secondary of a current transformer is always short-circuited under operating conditions because it avoids core saturation and high voltage induction.

In a transformer the resistance between its primary and secondary should be?

Description : In a transformer the resistance between its primary and secondary should be?

Last Answer : In a transformer the resistance between its primary and secondary should be infinity.

If an unsymmetrical line to ground fault occurs at the secondary terminals of a delta/star, ungrounded

Description : If an unsymmetrical line to ground fault occurs at the secondary terminals of a delta/star, ungrounded transformer, then  (A) zero sequence currents are present on both sides of the transformer  (B) ... side  (D) zero sequence currents are present on the primary side but not on the secondary side

Last Answer : If an unsymmetrical line to ground fault occurs at the secondary terminals of a delta/star, ungrounded transformer, then zero sequence currents are absent on both sides of the transformer 

Turns ratio formula

Description : Turns ratio

Last Answer : Turns ratio formula

State the meaning of secondary instrument. Classify secondary instruments.

Description : State the meaning of secondary instrument. Classify secondary instruments.

Last Answer : Secondary instruments: - Gives reading directly of the quantity being measured. - Calibrated with respect to absolute instruments  Classification of Secondary instruments:  1. Depending on the ... on permissible error: i) Standard meters ii) Substandard meters iii) First grade instruments.

State the meaning of absolute instrument and secondary instrument.

Description : State the meaning of absolute instrument and secondary instrument. 

Last Answer : Absolute instruments:   These instruments read the quantity under measurement indirectly i.e. in terms of deflection, degrees and meter constant. The actual value under measurement can be calculated ... of operation (b) Depending upon permissible percentage error. (c) Depending upon application.

Why CT is never operated with an open secondary ?

Description : Why CT is never operated with an open secondary ?

Last Answer : CT secondary should never be kept open because it will cause saturation of the core to a high level and very high voltage will appear across the secondary which can breakdown the insulation. One terminal of PT secondary is always grounded to avoid capacitive induction and for human safety

Compare primary and secondary instruments.

Description : Compare primary and secondary instruments.

Last Answer : Primary instruments  Secondary instruments  Gives magnitude of quantity in terms of physical constants of instrument  Gives reading directly of the quantity measured.  Need no calibration  ... .  e.g. magnetic meter, induction meter, hotwire meter and electrostatic meter 

Write difference between absolute & secondary instrument.

Description : Write difference between absolute & secondary instrument.

Last Answer : Absolute Instrument Secondary Instrument 1. These give magnitude of quantity in terms physical constants of instruments 1. These give reading directly of the quantity at the time of ... Raleigh current balance. 6. Examples - ammeter, voltmeter, amperehour meter, wattmeter etc.

Which of the following connection of transformers will give highest value of secondary voltage ?

Description : Which of the following connection of transformers will give highest value of secondary voltage ? (A) Delta primary delta secondary (B) Delta primary star secondary (C) Star primary star secondary (D) Star primary delta secondary

Last Answer : Which of the following connection of transformers will give highest value of secondary voltage ? (A) Delta primary delta secondary (B) Delta primary star secondary (C) Star primary star secondary (D) Star primary delta secondary

What happens to the voltage in the secondary when the frequency of the supply in the primary is decreased?

Description : What happens to the voltage in the secondary when the frequency of the supply in the primary is decreased? A) It increases B) It decreases C) It remains the same D) Cannot say unless the actual percentage increase in the frequency is known

Last Answer : What happens to the voltage in the secondary when the frequency of the supply in the primary is decreased? A) It increases B) It decreases C) It remains the same D) Cannot say unless the actual percentage increase in the frequency is known

Define: primary and secondary distribution system

Description : Define: primary and secondary distribution system 

Last Answer : i) Primary Distribution:  It is a 3-phase, 3-wire transmission line connected in between receiving substation to Distribution substation. OR It is link between receiving substation & ... substation to consumer line. OR It is link between distribution transformer substation & consumer. 

State the losses in secondary distribution system.

Description : State the losses in secondary distribution system. 

Last Answer : The losses in secondary distribution system: a) Technical losses: 1. Due to poor voltage 2. Due to unbalance load 3. Due poor quality of transformer & its components 4. Due to poor quality ... of induction type of energy meter. 3. Lack of administration. 4. Energy theft 5. Unmetered supply

What do you mean by secondary instruments?

Description : What do you mean by secondary instruments?

Last Answer : The instruments which will give the direct readings are called secondary instruments

What happens when a neutral wire touches a phase wire ?

Description : What happens when a neutral wire touches a phase wire ?

Last Answer : Maximum current flow due to Short circuit, limited value of fuse will burn else apparatus and conductor will be damaged.

Which wire can carry a higher current stranded wire or solid wire?

Description : Which wire can carry a higher current stranded wire or solid wire?

Last Answer : From the formula R=PL/A resistance rise with the fall of surface area ,inverse proportion relation between Resistance and Area ,so stranded wire has more area that a solid wire so more area less resistance. Less resistance/less electron flow opposition,more electron flow (current)

Why should switch be connected only on the live wire and never on the neutral wire?

Description : Why should switch be connected only on the live wire and never on the neutral wire?

Last Answer : Current runs from the transformer, through the protective device, through the load and back through the protective device (if on RCD).  If the protective device is only a CB the current passes ... the circuit will operate correctly but this is an unsafe practice and does not meet the standards.

For a round wire, the approximate value of fusing current is given by

Description : For a round wire, the approximate value of fusing current is given by

Last Answer : For a round wire, the approximate value of fusing current is given by  K√d3

lf the wire which is vertical to this page has electron flow downwards the conductor will have

Description : lf the wire which is vertical to this page has electron flow downwards the conductor will have

Last Answer : lf the wire which is vertical to this page has electron flow downwards the conductor will have a counter-clockwise field in the plane of the paper

Wire-wound resistors are unsuitable for use at high frequencies because they?

Description : Wire-wound resistors are unsuitable for use at high frequencies because they?

Last Answer : Wire-wound resistors are unsuitable for use at high frequencies because they exhibit unwanted inductive and capacitive effects.

What happens when a current flows through a wire?

Description : What happens when a current flows through a wire?

Last Answer : Current can produce two effect one is heating effect and second is magnetic effect.

21.The ordinary two winding transformer's primary and secondary windings always have A. different no of turns B. same size of copper wire C. a common magnetic circuit D. separate magnetic circuits

Description : 21.The ordinary two winding transformer's primary and secondary windings always have A. different no of turns B. same size of copper wire C. a common magnetic circuit D. separate magnetic circuits

Last Answer : C. A common magnetic circuit

52 A transformer has 1000 primary turns, connected to 250V ac supply. To get 400V secondary voltage the no of secondary turns should be A. 1600 B. 250 C. 400 D. 1250

Description : 52 A transformer has 1000 primary turns, connected to 250V ac supply. To get 400V secondary voltage the no of secondary turns should be A. 1600 B. 250 C. 400 D. 1250

Last Answer : A. 1600

29. In transformer terminology, the ratio 20:1 indicates that A. there are 20 turns on primary one turn on secondary B. secondary voltage is 1/20th of the primary C. primary current is 20 times greater than the secondary current D. for every 0 turns on primary, there is one turn on secondary

Description : 29.In transformer terminology, the ratio 20:1 indicates that A. there are 20 turns on primary one turn on secondary B. secondary voltage is 1/20th of the primary C. primary current is 20 times greater than the secondary current D. for every 0 turns on primary, there is one turn on secondary

Last Answer : A. there are 20 turns on primary one turn on secondary

What gauge wire is in ethernet cable?

Description : What gauge wire is in ethernet cable?

Last Answer : “Cat 5 cable typically has three twists per inch of each twisted pair of 24 gauge (AWG) copper wires within the cables.” (source)

How to Wire Speakers

Description : How to Wire Speakers

Last Answer : How to Wire Speakers Powerful speaker serve many purposes. Amongst these purposes are entertainment during special occasions and event sound system. To maximize its use, you need to understand how much ... long screws rather than short ones. Short screws may not be able to properly secure speakers.

How to Wire a Lamp

Description : How to Wire a Lamp

Last Answer : How to Wire a Lamp Wiring a lamp is something you need to do just in case your lamp breaks, and it so happens you keep on forgetting to get it repaired. It's a relatively easy process, with ... by yourself will also be a great help if you found the perfect lampshade from the flea market. Good luck.

How to Wire a House

Description : How to Wire a House

Last Answer : How to Wire a House Wiring a home is a challenging but worthwhile task. Familiarize yourself with things involved in wiring a home before you start this project. Make this your first priority because ... out more by hiring someone with both experience and expertise to help you in your first attempt.

How to Wire a Three-Way Switch ?

Description : How to Wire a Three-Way Switch ?

Last Answer : How to Wire a Three-Way Switch A three-way switch is the most common system installed in residential areas. This system is used to control a light and receptacle or more from two different switches ... wires for interior use. #14 wires are suggested to be used for protected circuits at 15 amperes.

How to wire a Ceiling Fan ?

Description : How to wire a Ceiling Fan ?

Last Answer : How to wire a Ceiling Fan To wire a ceiling fan is a relatively easy project. Usually, it is similar to working on replacing an existing light fixture. However, you will also need to check the ... have a loose wire connection. In case your fan vibrates or shakes, check if the blades are balanced.

State functions of ; i) Cable box ii) Guard wire iii) Shackle insulator iv) Stay wire used in service connection

Description : State functions of ; i) Cable box ii) Guard wire iii) Shackle insulator iv) Stay wire used in service connection

Last Answer : i) Function of Cable box: To hold and inspect incoming and outgoing terminals  ii) Function of Guard wire : A grounded conductor placed beneath an overhead transmission line in order to ground ... in service connection: To give mechanical Support to pole, line and prevent leakage current if any

The function of steel wire in ACSR conductors is

Description : The function of steel wire in ACSR conductors is (A) To take care of surges. (B) To reduce corona. (C) To reduce inductance. (D) To provide additional mechanical strength

Last Answer : The function of steel wire in ACSR conductors is To provide additional mechanical strength

A fuse wire should have :

Description : A fuse wire should have :  (A) Low specific resistance and high melting point (B) Low specific resistance and low melting point (C) High specific resistance and high melting point (D) High specific resistance and low melting point

Last Answer : A fuse wire should have : High specific resistance and low melting point

Aluminium is not used as winding wire for the armature of a dc machine because

Description : Aluminium is not used as winding wire for the armature of a dc machine because  (1) aluminium has low resistivity (2) a large winding space is taken by aluminium conductors and creates ... ) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

Last Answer : Aluminium is not used as winding wire for the armature of a dc machine because  (2) a large winding space is taken by aluminium conductors and creates jointing problems (3) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

Nichrome wire is an alloy of?

Description : Nichrome wire is an alloy of?

Last Answer : Nichrome wire is an alloy of nickel and chromium.

If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Description : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Last Answer : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes 0.4 ohm.

The resistance of a few meters of wire conductor in closed electrical circuit is?

Description : The resistance of a few meters of wire conductor in closed electrical circuit is?

Last Answer : The resistance of a few meters of wire conductor in closed electrical circuit is practically zero.

A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart...

Description : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span?

Last Answer : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span 4.0 cm.

In order to achieve high accuracy, the slide wire of a potentiometer should be?

Last Answer : In order to achieve high accuracy, the slide wire of a potentiometer should be as long as possible.

The ground wire should not be smaller than No ______ copper.

Last Answer : The ground wire should not be smaller than No 10 copper.

How do magnets and copper wire make electricity?

Description : How do magnets and copper wire make electricity?

Last Answer : According  to  Faradays  law , a changing  magnetic  field  on  a  conductor  induses  current  in  the  conductor  through   mutual  induction.

What is ACCC wire?

Description : What is ACCC wire?

Last Answer : Aluminum Conductor Composite Core

How is electricity passed through a wire?

Description : How is electricity passed through a wire?

Last Answer : A  wire contains  mobile  electrons  as  majority  charge  carriers  and  holes  as minority  charge carriers when  an emf  or   potential  diffrence is  provided , electrons  flow  in opposite  direction  with  holes(convection current  flow)

Which color wire is neutral?

Description : Which color wire is neutral?

Last Answer : Black but I think it depends with the place.