The main objectives in framing tariff are: 

(A) The consumers must readily understand the tariffs (B) The tariff must be equitable amongst different consumers (C) Tariffs can be modified from time to time (D) All of the above

1 Answer

Answer :

The main objectives in framing tariff are: 

(A) The consumers must readily understand the tariffs (B) The tariff must be equitable amongst different consumers (C) Tariffs can be modified from time to time (D) All of the above

Related questions

Description : State the objectives of tariff systems.

Last Answer : Objectives of tariff system: 1) Recover judiciously and legally capital investment made on electricity generation, transmission & distribution. 2) Recover judiciously and legally the cost of operation, supplies ... for high power factor. 8) Gain a suitable profit on the capital investment.

Description : Framing Nail Guns

Last Answer : If you are working on heavy carpentry tasks, like framing a house, you can use a framing nail gun or a framing nailer to make your work easier. Framing nail guns drive heavy-duty nails ... remember to handle this tool wisely because its great power could also mean a higher potential for injury.

Description : How to Use a Framing Square

Last Answer : How to Use a Framing Square A framing square is a tool that all do-it-yourself carpenters and woodmakers should half. It's made of steel or lightweight aluminum, with two-inch arm called a ... layout rafter and test. You can perform all the measurements using the top edge of the framing square.

Description : List the different types of tariff.

Last Answer : Various types of Tariff:-  1) Flat-demand Tariff  2) Simple-demand Tariff or Uniform Tariff  3) Flat-rate Tariff  4) Step-rate Tariff  5) Block-rate Tariff  6) Two-part Tariff  7) Maximum demand Tariff ... c) KW and KVAR Tariff 10) TOD (Time of Day) Tariff 11) TOU ( Time of Usage) Tariff

Description : Define the terms: i) Tariff ii) Fuel surcharge iii) Electricity Duty iv) Connected load

Last Answer : i) Tariff: The rate at which a consumer is charged for the consumption of electricity is called as tariff. OR The amount of money framed by the supplier for the supply of electrical energy ... is the total wattage of all appliances which are used by the consumer on his sanctioned connection. 

Description : Discuss how power factor tariff results into energy conservation.

Last Answer : Power factor tariff results into energy conservation: i) Applying incentives and penalties according to power factor is an effective way, which enables consumer to improve power factor so that he can ... finally leads to reduction in the current drawn by the load and helps for energy conservation.

Description : State the incentives and penalties related with power factor tariff.

Last Answer : Incentives and penalties related with power factor tariff: In addition to basic tariff (Maximum Demand Tariff / KVA Maximum Demand Tariff / Load factor tariff) the tariff in which P.F. of ... industrial consumer/H.T/ commercial consumers with contract demand above 80 kw/ 100Kva/107 hp consumer.

Description : What is Time of Day tariff? How it help in energy conservation?

Last Answer : Time-off-day tariff:- In addition to basic tariff (Maximum Demand Tariff / KVA Maximum Demand Tariff / Load factor tariff /also the tariff in which P.F. of industrial consumer is taken ... the rated load for longer times of the day their overall efficiency gets higher helping to conserve energy.

Description : Define the following terms related to tariff: (i) Connected load (ii) Unit consumed (iii) Fixed charges (iv) Electricity Tax 

Last Answer : (i) Connected load  It is the sum of the power ratings (Watts or kW or MW) of all devices and machines existing (installed) in the premises of consumer. It is used to decide the ... a percentage of the total electricity bill which includes all amounts that go to the electricity supply agency. 

Last Answer : For any type of consumer the ideal tariff is three part tariff.

Last Answer : In Hopknison demand rate or two part tariff the demand rate or fixed charges are dependent upon the maximum demand of the consumer.

Last Answer : In two part tariff, variation in load factor will affect operating or running charges.

Description : What are the main electrical equipment used in HPS ? State the function of each parts of it in brief. 

Last Answer : Following Main Electrical Equipment used in HPS & their function: 1. Alternator 2. Exciter 3. Transformer 4. Switchgear   Function :  1) Alternator:- Alternator is coupled to ... part from the healthy section. It contains circuit breaker, relays, switches and other control devices.  

Description : List out main components of Diesel power station. 

Last Answer : Main components of Diesel power station: 1) Diesel Engine 2) Engine Air intake system 3) Engine Fuel System 4) Engine Exhaust system 5) Engine cooling system 6) Engine Lubricating system 7) Engine Starting system 8) Diesel Engine Generator (Alternator) 

Description : List out main components of Reactors. 

Last Answer : List the main components of Reactors:  1. Core 2. Nuclear fuel (U235) 3. Moderator 4. Control Rod 5. Reflector 6. Reactor vessel 7. Shielding  

Description : The main advantage of AC over DC is:  (A) Conversion flexibility from one voltage level to other (B) AC can be easily converted into DC by using a rectifier (C) AC is easy to maintain & can be easily distributed at long distances (D) All of the above

Last Answer : Ac is easy to maintain and ac can be easily converted to dc by rectifier .There is no commutator for conversion in ac that's why ac machines are weight less and more efficiency.ac machines occupy less space than dc .

Description : List the main parts of D.C. motor

Last Answer : Main parts of D.C. motor and their functions:  Part Functions Yoke i) Provides mechanical support for poles. ii) Acts as protecting cover for machine. iii) Carries magnetic flux. ... a fixed physical position relative to the stator.  Shaft Used to transfer mechanical power 

Description : How rating of main switch and cable is selected for Industrial Installation.

Last Answer : 1. Rating of Main Switch or Fuse Rating is decided in industrial installation: Rating of main switch or fuse is based up the starting current of motor. For calculating starting current is considered 2 ... take 1.5 times the rated current or full load current. & thus cable rating is decided.

Last Answer : In main line service as compared to urban and suburban service distance between the stops is more, maximum speed reached is high, acceleration and retardation rates are low.

Last Answer : In split phase motor main winding is of thick wire placed at the bottom of the slots.

Last Answer : Discrimination between main and back up protection is provided by the use of relays which are slow.

Last Answer : The main function of a fuse is to prevent excessive currents.

Description : What is the main disadvantage of phase advancers?

Last Answer : It cannot be used for motors below 20 H.P.

Description : What is the main purpose of electroplating?

Last Answer : Protecting  reactive  metals  from  corrosion.

Description : What is the main use of a transistor?

Last Answer : Main use of a transistor as amplifier and as switch.

Description : What are the main causes of harmonics?

Last Answer : Harmonic is a non linear load because linear load voltage deviated due to connection of some electrinie device such as converter,inverter

Description : What are the main parts of a generator?

Last Answer : the main parts of the generator are as follows yoke Armature Poles field winding Prime mover  Commutator Shaft Bearings Brushes

Description : What are the objectives of tariff?

Last Answer : Electrical energy is sold at such a rate so that it not only returns the cost but also earns reasonable profit. Therefore, a tariff must cover the following items: transmitting and distributing equipment. equipment. costs etc.

Description : Which is the better way of framing the solution to this simple math problem?

Last Answer : I like Method 1 Where does it say in the problem that profit is $1

Description : Any tips and techniques for using metal studs when framing a basement?

Last Answer : Try these and see if they have what you are looking for. http://www.toolbase.org/PDF/DesignGuides/BuildersSteelStudGuide.pdf http://video.bobvila.com/m/21320131/basement-finishing-system-installation.htm

Description : Have you ever bought picture frames online or what do you think is the best way to take care of your framing needs?

Last Answer : It has always been my opinion that buying a frame is like buying a dress. Even online simulations cannot beat taking the art or images to the store and ” trying them on”

Description : How would you go about framing a large charcoal nude sketch?

Last Answer : Can you link a picture?

Description : Wetlands International is a conservation organization. Go through the following statements in the same context and choose the correct statement i) Only the countries which are signatories to the ... working at ground level to use practical knowledge for framing better policies -General Knowledge

Last Answer : Only iii Explanation: Wetland International is a global, independent, not for profit organization that is supported by Governments across the world and various NGOs. It is situated in the ... It also advocates on various corporate and international policies forum and conventions across the globe.

Description : i. Secretary is an elected representative of the shareholders. ii. Secretary is responsible for the decisionmaking and framing policies of a company.

Last Answer : Correct the underlined word and rewrite the following sentence: i. Secretary is an elected ... the decisionmaking and framing policies of a company.

Description : Why is California's Central Valley is normally dry. How did this area become a major framing region?

Last Answer : .

Description : What is the difference between captive and non-captive aluminium framing?

Last Answer : Need answer

Description : How much training do you need to get a job framing houses?

Last Answer : You probably need at least five years of training to get a job framing houses. A good way to get such training is by shadowing an experienced person on the job.

Description : I am framing a new house, are there certain building codes I need to know?

Last Answer : There are building codes, and they vary from state to state. Start learning about building codes at www.greenhomebuilding.com/building_codes.htm, and continue your search from there.

Description : Is a white picture frame or black picture frame better for framing black and white photographs?

Last Answer : The most important part of choosing a picture frame is to make sure the frame is not muted by your wall. Never pick a frame that is the same color as the wall behind it. Pick a picture frame that complements the shading in the black and white photograph.

Description : Do I need a construction degree to own a framing company?

Last Answer : Yes you do need a construction degree to own a framing company. The reason for this is because you need to be certified as a framer so you have proof you know what and how to frame and so people know there not getting ripped off

Description : Picture Framing Methods?

Last Answer : Obviously, picture frames are hanging or on a stand in just about every household in the country. These frames allow people to showcase their most cherished photos with ease. Nowadays, a person ... documents. Obviously, they are pretty popular.Digital photo frames are relatively new and have a

Description : The proposal for framing of the Constitution of India by an elected Constituent Assembly was made by - (1) Simon Commissions (2) Government of India Act, 1935 (3) Cripps Mission (4) British cabinet Delegation

Last Answer : (4) British cabinet Delegation Explanation: The proposal for framing of the constitution of India by an elected constituent assembly was made by British cabinet delegation.

Description : When were the Fundamental Duties included in the Constitution? (1) At the time of framing of Constitution (2) On 26th January, 1950 (3) In the 42nd Constitutional Amendment (4) In the 41st Constitutional Amendment

Last Answer : (3) In the 42nd Constitutional Amendment Explanation: The Fundamental Duties are defined as the moral obligations of all citizens to help promote a spirit of patriotism and to uphold the unity of ... by the 42nd Amendment Act 1976- Article 51A, upon the recommendations of the Swam Singh Committee.

Description : Which of the following exercised the most profound influence in framing the Indian Constitution? (1) British Constitution (2) US Constitution (3) Irish Constitution (4) The Government of India Act, 1935

Last Answer : (4) The Government of India Act, 1935 Explanation: The most profound influence was exercised by the Government of India Act of 1935. Such features as the federal scheme, office of governor ... , method of Presidential elections, and the nomination of members of Rajya Sabha by the President.

Description : From the Constitution of which country the provision of Federation was borrowed while framing the Constitution of India? (1) USA (2) UK (3) Canada (4) Switzerland

Last Answer : (3) Canada Explanation: Though the basic features of Indian Constitution are based on the Government of India Act, 1935, it has many features which were borrowed from many foreign constitutions. It ... of government (a federal system with a strong central government) and the idea of Residual Powers.

Description : What is framing? A. Is concerned of synchronous system B. Refers to parallel transmission C. Is concerned with the boundaries between characters D. Is concerned with individual bits

Last Answer : C. Is concerned with the boundaries between characters

Description : Mark the correct option relating to Public servant framing an incorrect document  with intent to cause injury a) Shall be punished for a term which may extend to 3 years or with fine or both. b) This is cognizable case and bailable  c) Both the a & b are correct d) Neither A nor B

Last Answer : c) Both the a & b are correct

Description : Which of the following exercised the most profound influence in framing the Indian Constitution? (A) British Constitution (B) U.S. Constitution (C) Irish Constitution (D) The Government of India Act, 1935

Last Answer : (D) The Government of India Act, 1935

Description : Which of the following exercised the most profound influence in framing the Indian Constitution? (A) British Constitution (B) U.S. Constitution (C) Irish Constitution (D) The Government of India Act, 1935

Last Answer : (D) The Government of India Act, 1935

Description : The _____sublayer is responsible for the operation of the CSMA/CD access method and framing. A) LLC B) MII C) MAC D) none of the above

Last Answer : MAC