A fuse wire should have : 

(A) Low specific resistance and high melting point (B) Low specific resistance and low melting point (C) High specific resistance and high melting point (D) High specific resistance and low melting point

1 Answer

Answer :

A fuse wire should have : High specific resistance and low melting point

Related questions

Description : ln HRC fuse the time between cut-off and final current zero is called

Last Answer : ln HRC fuse the time between cut-off and final current zero is called the arcing time

Last Answer : A fuse in a motor circuit provides protection against short-circuit and overload.

Last Answer : The fuse blows off by melting.

Last Answer : The fuse rating is expressed in terms of current.

Last Answer : H.R.C. fuse, as compared to a rewirable fuse, has no ageing effect, high speed of operation, high rupturing capacity.

Last Answer : A fuse is connected in series with circuit.

Last Answer : The material used for fuse must have low melting point and high specific resistance.

Last Answer : The main function of a fuse is to prevent excessive currents.

Last Answer : The ground wire should not be smaller than No 10 copper.

Description : What is fuse?

Last Answer : Ans. Fuse is used to protect an electric circuit when the rated current exceeds in the circuit the fuse wire melts and opens the circuit.

Description : State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.  

Last Answer : Following advantages of MCB over Fuse: 1. No need of replacement of fuse wire. 2. Manually restore of supply is simple. 3. Fault understanding by visual inspection 4. More safe than fuse The standard specifications of ... 6A, 10A,16A,20A, 25A, 30A, 32A, 40A, 50A, 60A and 63A 6. 250V and 450 v

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Last Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

Description : Write applications of each of the following:(i) Fuse (ii) MCB (iii) MCCB.

Last Answer : i) Applications of fuse:  * Used in domestic installations to provide short circuit protection.  * Used in commercial / Industrial installations to provide overload and short circuit protection.  * Used in ...  * Rectifiers panels,  * U.P.S, Electronic equipment,  * Motors,  * Furnaces

Description : Give the function of fuse and switch.

Last Answer : Functions of fuse:  * To break the circuit under fault condition.  * To provide overcurrent protection to the circuit.  * To provide short circuit protection to the circuit.  * To provide ...  * To make the electric circuit manually.  * To break the electric circuit manually.

Description : What is a fuse ?

Last Answer :  A Fuse is a protective device which prevent overloading of current in a circuit.

Description : what is HRC fuse?

Last Answer : HRC (High Rupturing Capacity) fuse HRC fuse is High Rupturing Capacity fuse. At the time of fault it disconnect the circuit very fast. Filling powder is silica sand. No flashover ... speed response Reliable No maintenance CheaperDisadvantages:- We have to replace it manually after each operation.

Description : What gauge wire is in ethernet cable?

Last Answer : “Cat 5 cable typically has three twists per inch of each twisted pair of 24 gauge (AWG) copper wires within the cables.” (source)

Description : How to Wire Speakers

Last Answer : How to Wire Speakers Powerful speaker serve many purposes. Amongst these purposes are entertainment during special occasions and event sound system. To maximize its use, you need to understand how much ... long screws rather than short ones. Short screws may not be able to properly secure speakers.

Description : How to Wire a Lamp

Last Answer : How to Wire a Lamp Wiring a lamp is something you need to do just in case your lamp breaks, and it so happens you keep on forgetting to get it repaired. It's a relatively easy process, with ... by yourself will also be a great help if you found the perfect lampshade from the flea market. Good luck.

Description : How to Wire a House

Last Answer : How to Wire a House Wiring a home is a challenging but worthwhile task. Familiarize yourself with things involved in wiring a home before you start this project. Make this your first priority because ... out more by hiring someone with both experience and expertise to help you in your first attempt.

Description : How to Wire a Three-Way Switch ?

Last Answer : How to Wire a Three-Way Switch A three-way switch is the most common system installed in residential areas. This system is used to control a light and receptacle or more from two different switches ... wires for interior use. #14 wires are suggested to be used for protected circuits at 15 amperes.

Description : How to wire a Ceiling Fan ?

Last Answer : How to wire a Ceiling Fan To wire a ceiling fan is a relatively easy project. Usually, it is similar to working on replacing an existing light fixture. However, you will also need to check the ... have a loose wire connection. In case your fan vibrates or shakes, check if the blades are balanced.

Description : What happens when a neutral wire touches a phase wire ?

Last Answer : Maximum current flow due to Short circuit, limited value of fuse will burn else apparatus and conductor will be damaged.

Description : Which wire can carry a higher current stranded wire or solid wire?

Last Answer : From the formula R=PL/A resistance rise with the fall of surface area ,inverse proportion relation between Resistance and Area ,so stranded wire has more area that a solid wire so more area less resistance. Less resistance/less electron flow opposition,more electron flow (current)

Description : Why should switch be connected only on the live wire and never on the neutral wire?

Last Answer : Current runs from the transformer, through the protective device, through the load and back through the protective device (if on RCD).  If the protective device is only a CB the current passes ... the circuit will operate correctly but this is an unsafe practice and does not meet the standards.

Description : State functions of ; i) Cable box ii) Guard wire iii) Shackle insulator iv) Stay wire used in service connection

Last Answer : i) Function of Cable box: To hold and inspect incoming and outgoing terminals  ii) Function of Guard wire : A grounded conductor placed beneath an overhead transmission line in order to ground ... in service connection: To give mechanical Support to pole, line and prevent leakage current if any

Description : The function of steel wire in ACSR conductors is (A) To take care of surges. (B) To reduce corona. (C) To reduce inductance. (D) To provide additional mechanical strength

Last Answer : The function of steel wire in ACSR conductors is To provide additional mechanical strength

Description : Increasing the number of turns of wire on the secondary of a transformer will  (A) Decrease the secondary current (B) Increase the primary current (C) Have no effect on the secondary current (D) Increase the secondary current

Last Answer : Increasing the number of turns of wire on the secondary of a transformer will Decrease the secondary current 

Description : For a round wire, the approximate value of fusing current is given by

Last Answer : For a round wire, the approximate value of fusing current is given by  K√d3

Description : Aluminium is not used as winding wire for the armature of a dc machine because  (1) aluminium has low resistivity (2) a large winding space is taken by aluminium conductors and creates ... ) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

Last Answer : Aluminium is not used as winding wire for the armature of a dc machine because  (2) a large winding space is taken by aluminium conductors and creates jointing problems (3) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

Description : lf the wire which is vertical to this page has electron flow downwards the conductor will have

Last Answer : lf the wire which is vertical to this page has electron flow downwards the conductor will have a counter-clockwise field in the plane of the paper

Description : Nichrome wire is an alloy of?

Last Answer : Nichrome wire is an alloy of nickel and chromium.

Description : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Last Answer : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes 0.4 ohm.

Description : The resistance of a few meters of wire conductor in closed electrical circuit is?

Last Answer : The resistance of a few meters of wire conductor in closed electrical circuit is practically zero.

Description : Wire-wound resistors are unsuitable for use at high frequencies because they?

Last Answer : Wire-wound resistors are unsuitable for use at high frequencies because they exhibit unwanted inductive and capacitive effects.

Description : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span?

Last Answer : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span 4.0 cm.

Last Answer : In order to achieve high accuracy, the slide wire of a potentiometer should be as long as possible.

Description : What happens when a current flows through a wire?

Last Answer : Current can produce two effect one is heating effect and second is magnetic effect.

Description : How do magnets and copper wire make electricity?

Last Answer : According  to  Faradays  law , a changing  magnetic  field  on  a  conductor  induses  current  in  the  conductor  through   mutual  induction.

Description : What is ACCC wire?

Last Answer : Aluminum Conductor Composite Core

Description : How is electricity passed through a wire?

Last Answer : A  wire contains  mobile  electrons  as  majority  charge  carriers  and  holes  as minority  charge carriers when  an emf  or   potential  diffrence is  provided , electrons  flow  in opposite  direction  with  holes(convection current  flow)

Description : Which color wire is neutral?

Last Answer : Black but I think it depends with the place.

Description : I've lost my memory, How do I caculate the value of this resistor?

Last Answer : Shoot me if I’m wrong, but don’t you need Ohm’s law for that: http://www.kpsec.freeuk.com/ohmslaw.htm?

Description : Describe the working of HRC fuse with neat diagram.

Last Answer : Working of HRC Fuse: Under normal conditions, the fuse element is at a temperature below its melting point. Therefore, it carries the normal current without overheating. When a fault ... powder and results in the formation of high resistance substance that helps in quenching the arc. 

Description : Explain construction and characteristics of HRC fuse.

Last Answer : Construction of H.R.C. Fuse: Figure shows the essential parts of a typical H.R.C. fuse. It mainly consist of a heat resisting ceramic body. Both the ends of the cermaic body consists ... particular circuit and for coordination purpose. A typical Fuse characteristic is shown in figure below. 

Description : Describe the difference between fuse and MCCB.

Last Answer : Sr. No Fuse MCCB 1 Fuse melts / fuses in case of excessive load. MCCB trips off in case of excessive load. 2 Fuse needs to be replaced after every ... Generally protects the load against short-circuit. Generally protects the load against different types of faults.

Description : Explain with neat sketch, the Pilot wire protection scheme applied to transmission line.

Last Answer : Pilot Wire Protection scheme of Transmission Line : Figure shows the single line diagram of Merz price voltage balance system for pilot wire protection of three phase transmission line. ... through the relay, which gives trip signal to the circuit breaker for protection of transmission line.

Description : State difference between the wire used in the element of an electric heater and in a fuse wire. -Science

Last Answer : The wire used in the element of electric heater has a high resistivity and have a high melting point, so that even at a high temperature element do not burn while fuse wire have a low melting point and high resistivity so that it will melt if a current of large magnitude passes through the wire.

Description : Which covalent fuse wire is connected to the main circuit ?

Last Answer : The fuse wire is connected to the main circuit in a class co-op.

Description : Which wire is the fuse connected to ?

Last Answer : The fuse is connected to the live wire.