The arc temperature in Oil Circuit Breaker may reach up to_______.

The arc temperature in Oil Circuit Breaker may reach up to_______. 

(A) 5,000° K (B) 8,000° K (C) 10,000° K (D) None of the above
by

1 Answer

Answer :

The arc temperature in Oil Circuit Breaker may reach up to 5,000° K 

by

Related questions

Arc in a circuit breaker is interrupted at?

Last Answer : Arc in a circuit breaker is interrupted at zero current.

The arc voltage produced in A.C. circuit breaker is always?

Last Answer : The arc voltage produced in A.C. circuit breaker is always in phase with the arc current.

The arc voltage in a circuit breaker is :

Description : The arc voltage in a circuit breaker is :

Last Answer : The arc voltage in a circuit breaker is : in phase with the arc current

Which of the following is used in a circuit breaker as the medium in which the arc forms?

Description : Which of the following is used in a circuit breaker as the medium in which the arc forms? A) Insulating gas B) Insulating oil C) Vacuum D) All the above

Last Answer : Which of the following is used in a circuit breaker as the medium in which the arc forms? A) Insulating gas B) Insulating oil C) Vacuum D) All the above

The Minimum Oil Circuit Breaker (MOCB) is named because of :

Description : The Minimum Oil Circuit Breaker (MOCB) is named because of :  (A) Reduced requirement of oil (B) Reduced requirement of air (C) All of the above (D) None of the above

Last Answer : The Minimum Oil Circuit Breaker (MOCB) is named because of : Reduced requirement of oil 

ln a minimum oil circuit breaker the oil is used

Description : ln a minimum oil circuit breaker the oil is used

Last Answer : ln a minimum oil circuit breaker the oil is used to act as circuit breaking medium only

Arc in a circuit behaves as?

Description : Arc in a circuit behaves as?

Last Answer : Arc in a circuit behaves as a resistance decreasing with voltage rise across the arc.

The number of cycles in which a high speed circuit breaker can complete its operation is

Description : The number of cycles in which a high speed circuit breaker can complete its operation is  (A) 3 to 8 (B) 10 to 18 (C) 20 to 30 (D) 40 to 50

Last Answer : The number of cycles in which a high speed circuit breaker can complete its operation is 3 to 8

A circuit breaker is designed to protect an electrical circuit from damage caused by :

Description : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

Last Answer : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

For selecting a circuit breaker, ______ should be determined.

Description : For selecting a circuit breaker, ______ should be determined.  (A) initial current that flows on occurrence of a short circuit only (B) transient current that flows at the time of circuit interruption only (C) resonant frequency only (D) (A) and (B) 

Last Answer : For selecting a circuit breaker, ______ should be determined. (A) initial current that flows on occurrence of a short circuit only (B) transient current that flows at the time of circuit interruption only (C) resonant frequency only (D) (A) and (B) 

In a circuit breaker the basic problem is to?

Last Answer : In a circuit breaker the basic problem is to transmit large power.

Ionization in circuit breaker is facilitated by?

Last Answer : Ionization in circuit breaker is facilitated by high temperature, increase of mean free path, increasing field strength.

The voltage appearing across the contacts after opening of the circuit breaker is called______voltage.

Last Answer : The voltage appearing across the contacts after opening of the circuit breaker is called recovery voltage.

Air blast circuit breaker is used for?

Last Answer : Air blast circuit breaker is used for repeated duty.

Magnetic circuit breaker has ______ trip action.

Last Answer : Magnetic circuit breaker has instantaneous trip action.

Thermal circuit breaker has?

Last Answer : Thermal circuit breaker has delayed trip action.

The arcing contacts in a circuit breaker are made of?

Last Answer : The arcing contacts in a circuit breaker are made of copper tungsten alloy.

what is SF6 circuit breaker?

Description : what is SF6 circuit breaker?

Last Answer : SF6 is Sulpher hexa Fluoride gas. If this gas is used as arc quenching medium in a Circuit breaker means SF6 CB.

Explain about Circuit Breaker

Description : Explain about Circuit Breaker

Last Answer : Ans: CIRCUIT BREAKERS: In the case of outdoor type installation, the circuit breakers have fixed location and the station layout is such that adequate section clearances are always available from ... carried out as above, every circuit breaker will be completely overhauled after five year interval.

How to Reset a Circuit Breaker

Description : How to Reset a Circuit Breaker

Last Answer : How to Reset a Circuit Breaker All is well with the lights and your electrical appliances one minute, then everything falls into pitch-black darkness the next moment. When a room in your house ... electrical fires. With these tips, a power surge does not have to be a permanent inconvenience.

How to Install a Circuit Breaker

Description : How to Install a Circuit Breaker

Last Answer : How to Install a Circuit Breaker A circuit breaker is an essential component of a home's electric system. When power surges occur, it trips then shuts off the electricity, preventing ... -functional electrical system. Just make sure you take proper safety precautions when installing this device.

Explain working of static AC circuit breaker.

Description : Explain working of static AC circuit breaker. 

Last Answer : Static AC Circuit breaker: The circuit configuration of static AC circuit breaker using SCR is shown in the figure. When switch S' is closed, the SCRs T1 and T2 are fired in positive ... non-availability of gate current. Thus the maximum time delay for breaking the circuit is one half-cycle.

Explain working of AC circuit breaker using SCR with circuit diagram.

Description : Explain working of AC circuit breaker using SCR with circuit diagram.

Last Answer : AC Circuit Breaker:  The circuit configuration of static AC circuit breaker using SCR is shown in the figure. When switch S' is closed, the SCRs T1 and T2 are fired in positive ... to non-availability of gate current. Thus the maximum time delay for breaking the circuit is one half-cycle.

State function of starter and ELCB. (Earth Leakage Circuit Breaker)

Description : State function of starter and ELCB. (Earth Leakage Circuit Breaker)

Last Answer : i) Function of Starter:- 1. To prevent the high starting current OR to minimize the starting current. 2. To give supply failure protection 3. To give over load and short circuit protection ... an installation and cut off the circuit from power supply and avoid electrical shock to the person.

Breaking capacity of a circuit breaker is usually expressed in terms of

Description : Breaking capacity of a circuit breaker is usually expressed in terms of  (1) Ampere (2) Volts (3) MW (4) MVA

Last Answer : Breaking capacity of a circuit breaker is usually expressed in terms of MVA

The current zero interruption, in oil and air blast circuit breakers, is achieved by?

Description : The current zero interruption, in oil and air blast circuit breakers, is achieved by?

Last Answer : The current zero interruption, in oil and air blast circuit breakers, is achieved by lengthening of the gap, cooling and blast effect.

What should I get for my first welder, arc or stick?

Description : What should I get for my first welder, arc or stick?

Last Answer : ‘pends, I think you should get the arc.

Compare the AC and DC Arc lamps.

Description : Compare the AC and DC Arc lamps.

Last Answer : AC Arc Lamp DC Arc Lamp Cross section area of electrode is same Cross section area of electrode is positive rod is twice that of negative rod Series inductor is used for stability ... supply is used for DC arc lamp Luminous efficiency is less Luminous efficiency is high

Compare between Resistance welding and Arc welding on any six points.

Description : Compare between Resistance welding and Arc welding on any six points.

Last Answer : Sr.No Parameters Resistance Welding Arc Welding 1 Type of welding Plastic/Pressure/Non-fusion welding Fusion/Non pressure welding 2 Principle of heat developed Heat ... It is suitable for mass production It is suitable for heavy job, maintenance and repair work

Write the purpose of coal and ash handling unit. Also write different activities that arc carried out in this unit.

Description : Write the purpose of coal and ash handling unit. Also write different activities that arc carried out in this unit.

Last Answer : Purpose of coal and ash handling unit :-  To transport coal from coal storage to power plant. A large quantity of ash about 10 to 30 % produced in furnace, the removal of ash from boiler furnace ... disposed off.  Various methods of disposal of ash:  Mechanical system.  Pneumatic system.

Arc resistance

Description : Arc resistance  (1) increases with increase in arc current (2) decrease with increase in arc current (3) is independent of arc current (4) is independent of arc length

Last Answer : Arc resistance decrease with increase in arc current 

For arc welding current range is usually

Description : For arc welding current range is usually  (1) 10 to 15 A (2) 30 to 40 A (3) 50 to 100 A (4) 100 to 350 A

Last Answer : For arc welding current range is usually 100 to 350 A

Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :

Description : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  (C) Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

Last Answer : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  ... Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

The supply for arc welding is :

Description : The supply for arc welding is : 

Last Answer : The supply for arc welding is : Low voltage, high current ac or dc voltage

Oil switches are employed for?

Last Answer : Oil switches are employed for high voltages and large currents circuits.

Is it possible for the temperature in the air to reach over 120*?

Description : Is it possible for the temperature in the air to reach over 120*?

Last Answer : Yes. I’m not sure about how hot it can get in Texas, but my husband is in Iraq right now and they’ve had days that have hit 130*F (and it’s expected to get hotter these next few months).

Which way do you prefer to reach a comfortable temperature?

Description : Which way do you prefer to reach a comfortable temperature?

Last Answer : to feel comfortable? Cooling. I enjoy eating ice. Anything cool. But of course, a good cup of tea is great. But as a person, yeah, anything cold. Even if it’s in the middle of winter.

If the % reactance upto the fault point is 20%, then the short circuit current will be

Description : If the % reactance upto the fault point is 20%, then the short circuit current will be

Last Answer : If the % reactance upto the fault point is 20%, then the short circuit current will be 5 times the full load current

Which of the following circuit breakers has high reliability & minimum maintenance?

Description : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Last Answer : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

The following is/are the characteristics of SF6 circuit breakers:

Description : The following is/are the characteristics of SF6 circuit breakers:  (A) It does not need an auxiliary breaking chamber (B) Short break time of 2 to 2.5 cycles (C) All of the above (D) None of the above

Last Answer : The following is/are the characteristics of SF6 circuit breakers:  (A) It does not need an auxiliary breaking chamber (B) Short break time of 2 to 2.5 cycles (C) All of the above (D) None of the above

A fuse in a motor circuit provides protection against?

Last Answer : A fuse in a motor circuit provides protection against short-circuit and overload.

Air blast circuit breakers for 400 kV power system are designed to operate in?

Last Answer : Air blast circuit breakers for 400 kV power system are designed to operate in 50 millisecond.

The short circuit in any winding of the transformer is the result of?

Last Answer : The short circuit in any winding of the transformer is the result of impulse voltage.

The time of closing the cycle, in modern circuit breakers is?

Last Answer : The time of closing the cycle, in modern circuit breakers is 0.003 sec.

Circuit breakers are essentially?

Last Answer : Circuit breakers are essentially current carrying contacts called electrodes.

Circuit breakers usually operate under?

Last Answer : Circuit breakers usually operate under transient state of short-circuit current.

In which fault the maximum short circuit current occurs?

Description : In which fault the maximum short circuit current occurs?

Last Answer : In three phase bolted fault the maximum short circuit occurs.

Which of the following medium is employed for extinction of arc in air circuit breaker ?

Description : Which of the following medium is employed for extinction of arc in air circuit breaker ?(a) Water (b) Oil(c) Air (d) SF6

Last Answer : Which of the following medium is employed for extinction of arc in air circuit breaker ?(a) Water (b) Oil(c) Air (d) SF6

Will a successful oil spill clean up in the gulf leave a residue that is not able to be cleaned?

Description : Will a successful oil spill clean up in the gulf leave a residue that is not able to be cleaned?

Last Answer : answer:No, but close. There is always residuals. Like the ocean you can then run the pool filter to get the rest of the nasties out.

BP oil is spending billions to clean up the oil spill. How long will it take for them to start charging us for their efforts?

Description : BP oil is spending billions to clean up the oil spill. How long will it take for them to start charging us for their efforts?

Last Answer : answer:The began charging us about a decade ago !! I don't think they can raise gas prices much more as it is back to $3 a gallon in most of the country which it's pretty much the limit of what ... strung up ! * I believe they will have to build a expansion wing in Hell to house BP executives !!