Stability of a transmission line can be increased by

Stability of a transmission line can be increased by
by

1 Answer

Answer :

Stability of a transmission line can be increased by Shunt capacitor, Series capacitor

by

Related questions

The steady state stability of the power system can be increased by?

Last Answer : The steady state stability of the power system can be increased by connecting lines in parallel.

In a transmission line if booster transformers are to be used, preferred location will be

Description : In a transmission line if booster transformers are to be used, preferred location will be  (A) At the receiving end (B) At the sending end (C) At the intermediate point (D) Anywhere in the line 

Last Answer : In a transmission line if booster transformers are to be used, preferred location will be At the intermediate point

A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of

Description : A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of

Last Answer : A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of 0.02 P.U

State the limitations of EHVAC transmission line.

Description : State the limitations of EHVAC transmission line. 

Last Answer : Following are the Limitations of EHVAC Transmission:   1. Insulation cost increases as voltage increases 2. Skin effect is more 3. Proximity effect is more. 4. Corona loss increases. 5. Radio ... 18. EHVAC is economical only for bulk amount of power is to be transmitted over long distance. 

State line parameters of transmission line.

Description : State line parameters of transmission line. 

Last Answer : Following are the of Line parameters of transmission line:  1. Resistance  2. Inductance  3. Capacitance

State the impact of inductance and resistance on transmission line performance

Description : State the impact of inductance and resistance on transmission line performance

Last Answer : Impact of inductance on transmission line: 1) It causes IXL drop in transmission line which affects regulation. 2) It is the only parameter which decides power transmission capacity of line i. ... is very small, it causes losses, temperature rise& poor voltage regulation so it cannot be neglected

effect of inductance and capacitance on performance of transmission line.

Description : effect of inductance and capacitance on performance of transmission line.

Last Answer : Following are the effect on performance of transmission line:  1. Due to inductance (L) voltage drop in transmission line produces.  2. Capacitor (C) draws charging current ... , transmission line efficiency, voltage regulation & also power factor of transmission line gets affected. 

While calculating performance of medium transmission line, what assumptions are made in case of (i) Nominal 'T' Method (ii) Nominal 'TT' Method.

Description : While calculating performance of medium transmission line, what assumptions are made in case of (i) Nominal 'T' Method (ii) Nominal 'TT' Method. 

Last Answer : (i) Assumptions are made in case of Nominal 'T' Method:  a. It is assume that line capacitance is connected at center of transmission line. b. It is assume that half ... assumed that transmission line resistance & reactance per phase is connected in between two half transmission line capacitance 

HVDC transmission line in India:

Description : HVDC transmission line in India: 

Last Answer : HVDC transmission line in India:  S.N .  From To  Voltage 1 Rihand (U.P) (from 1990) Dadri +- 500 KV (bipolar) 2 Talcher- is the biggest ... (Chandrapur) Western Region  140KV   8 Connecting Southern region(Vizag- Gajuwaka) Eastern Region 140KV 

effect of line parameter on performance of transmission line.

Description : effect of line parameter on performance of transmission line. 

Last Answer : Following are the effect of line parameter on performance of transmission line:  1. Due to resistance (R), voltage drop in transmission line & copper losses in transmission line ... transmission line efficiency, voltage regulation & also power factor of transmission line gets affected. 

Why is transmission line 11kV, 33kV 66kV Not Is 10kV, 20kV, 30kV ?

Description : Why is transmission line 11kV, 33kV 66kV Not Is 10kV, 20kV, 30kV ?

Last Answer : 10kv plus to compensate losses in olden days 1kv were added and transmitted. Since all equipment used for transmission have a multiple of 11 from olden days, still that is being followed even though the losses are ... voltages, multiples of 11 is eazy for winding ratios.. i.e. 11kv to 33kv is 1:3.

A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient?

Description : A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9 

Last Answer : A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9 

The sag of a transmission line is least affected by

Description : The sag of a transmission line is least affected by (A) Self weight of the conductor. (B) Temperature of the surrounding air. (C) Current through the conductor. (D) Ice deposited on the conductor.

Last Answer : The sag of a transmission line is least affected by Current through the conductor.

For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is

Description : For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is

Last Answer : For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is 0.707 lead

A transmission line of 200 km has a certain A, B, C and D parameters. If the length is reduced to 60 km

Description : A transmission line of 200 km has a certain A, B, C and D parameters. If the length is reduced to 60 km

Last Answer : A transmission line of 200 km has a certain A, B, C and D parameters. If the length is reduced to 60 km A increases, B decreases

Series capacitive compensation in EHV transmission line is used to

Description : Series capacitive compensation in EHV transmission line is used to

Last Answer : To maintain voltage stability 

The sending end and receiving end voltages of a three-phase transmission line are 10 kV/ph and 9.5 kV/ph,

Description : The sending end and receiving end voltages of a three-phase transmission line are 10 kV/ph and 9.5 kV/ph, respectively. If the resistance drop is 150 V/ph and receiving end power factor is 0.8, the sending end power factor is (A) 0.745 lagging (B) 0.775 lagging (C) 0.8 lagging (D) 0.85 lagging

Last Answer : Vscos¢s-Vrcos¢r=IR

Transmission efficiency of a transmission line increases with the

Description : Transmission efficiency of a transmission line increases with the

Last Answer : Transmission efficiency of a transmission line increases with the increase in power factor and voltage

Which relay is preferred for phase fault on short transmission line?

Last Answer : Reactance relay is preferred for phase fault on short transmission line.

When a wave propagates on a transmission line, it suffers reflection several times at?

Last Answer : When a wave propagates on a transmission line, it suffers reflection several times at sending and other end.

The interaction between a transmission line and communication line is minimized by?

Last Answer : The interaction between a transmission line and communication line is minimized by transposing transmission as well as communication lines, increasing the height of the transmission line tower, increasing the distance between the two lines.

When a transmission line is energized, the wave that propagates on it is?

Last Answer : When a transmission line is energized, the wave that propagates on it is current wave and voltage wave.

A transmission line is protected by?

Last Answer : A transmission line is protected by distance protection, time graded and current graded overcurrent protection.

what is mean by medium transmission line ?

Description : what is mean by medium transmission line ?

Last Answer : The transmission line which have length between 80 km to 250 km is known as medium transmission line.

what is mean by short transmission line ?

Description : what is mean by short transmission line ?

Last Answer : The transmission lines which have length less than 80 km is known as short transmission lines.

what is mean by long transmission line ?

Description : what is mean by long transmission line ?

Last Answer : The transmission line which have length more than 250 km are known as long transmission lines.

In case the height of transmission tower is increased, which of the following parameter is likely to change?

Description : In case the height of transmission tower is increased, which of the following parameter is likely to change?  (A) Resistance (B) Inductance (C) Capacitance (D) None of the above

Last Answer : In case the height of transmission tower is increased, which of the following parameter is likely to change?  (A) Resistance (B) Inductance (C) Capacitance (D) None of the above

Define stability. Sketch the root locations in the s-plane for stable and unstable system.

Description : Define stability. Sketch the root locations in the s-plane for stable and unstable system.

Last Answer : Stability: The system is said to be stable if it produces bounded output for a bounded input. It is used to define usefulness of the system. The stability implies that the system performance should not ... absence of the input, output may not return to zero it shows certain output without input. 

The steady state stability limit as compared to the transient state stability limit is always

Description : The steady state stability limit as compared to the transient state stability limit is always

Last Answer : The steady state stability limit as compared to the transient state stability limit is always Greater

The 'Equal area criterion' for the determination of transient stability of a synchronous machine connected to

Description : The 'Equal area criterion' for the determination of transient stability of a synchronous machine connected to an infinite bus  (1) ignores line as well as synchronous machine resistance ... consideration the possibility of machine losing synchronism after it has survived during the first swing.

Last Answer : 1

The stability of the power system is not affected by

Description : The stability of the power system is not affected by  (1) generator reactance (2) line reactance (3) line losses (4) output torque

Last Answer : The stability of the power system is not affected by line losses

If stability error for step input and speed of response be the criteria for design, what controller would you

Description : If stability error for step input and speed of response be the criteria for design, what controller would you recommend (1) P controller (2) PD controller (3) PI controller (4) PID controller

Last Answer : If stability error for step input and speed of response be the criteria for design, what controller would you recommend (1) P controller (2) PD controller (3) PI controller (4) PID controller

Which of the following statements is true? steady-state stability limit is greater than transient stability limit

Description : Which of the following statements is true?  (1) steady-state stability limit is greater than transient stability limit  (2) steady-state stability limit is equal to transient stability ... made regarding the equality or otherwise of the steady-state stability limit and transient stability limit

Last Answer : Which of the following statements is true?  (1) steady-state stability limit is greater than transient stability limit  (2) steady-state stability limit is equal to transient ... made regarding the equality or otherwise of the steady-state stability limit and transient stability limit

steady-state stability of a power system is improved by

Description : steady-state stability of a power system is improved by

Last Answer : steady-state stability of a power system is improved by using double circuit line instead of single circuit line

With fault clearing time, the transient stability of a power system

Description : With fault clearing time, the transient stability of a power system

Last Answer : With fault clearing time, the transient stability of a power system decreases

Improvement of transient stability using SVC

Description : Improvement of transient stability using SVC

Last Answer : Improvement of transient stability using SVC The static VAR compensator (SVC) is a shunt connected FACTS device. SVC have two modes one is inductive ... ;transmittable power. Transient stability improvement can be estimated using equal area criterion.

As the load is increased the speed of D.C. shunt motor will?

Last Answer : As the load is increased the speed of D.C. shunt motor will reduce slightly.

The increased load during summer months is due to?

Last Answer : The increased load during summer months is due to increased use of fans and air conditioners.

If the supply frequency to the transformer is increased, the iron loss will?

Last Answer : If the supply frequency to the transformer is increased, the iron loss will increase.

If the load of the normally excited synchronous motor is increased the power factor will?

Description : If the load of the normally excited synchronous motor is increased the power factor will?

Last Answer : If the load of the normally excited synchronous motor is increased the power factor will become lagging.

How many insulator disc used for 33 kV transmission voltage line?

Description : How many insulator disc used for 33 kV transmission voltage line?

Last Answer : 5,As 33kv is Vrms

For 11kV line the inductance per km per phase will be of the order of:

Description : For 11kV line the inductance per km per phase will be of the order of:  (A) 1 H (B) 0.1 H (C) 1 mH (D) 0.1 mH

Last Answer : For 11kV line the inductance per km per phase will be of the order of: 1 mH

In which of the following transmission lines, the value of the Shunt admittance should be

Description : In which of the following transmission lines, the value of the Shunt admittance should be approximated to zero ? (A) A 66 kV 35 km long line (B) A 132 kV 200 km long line (C) A 220 kV 300 km long line (D) A 400 kV 500 km long line

Last Answer : In which of the following transmission lines, the value of the Shunt admittance should be approximated to zero ? (A) A 66 kV 35 km long line (B) A 132 kV 200 km long line (C) A 220 kV 300 km long line (D) A 400 kV 500 km long line

If 3000 kW power is to be transmitted over a distance of 30 km, the desirable transmission voltage will be.

Description : If 3000 kW power is to be transmitted over a distance of 30 km, the desirable transmission voltage will be.  (A) 11 kV (B) 33 kV (C) 66 kV (D) 132 kV

Last Answer : By

The purpose of guard ring in transmission lines is to

Description : The purpose of guard ring in transmission lines is to  (1) reduce the earth capacitance of the lowest unit. (2) increase the earth capacitance of the lowest unit. (3) reduce the transmission lines losses. (4) reduce the reactance of the line

Last Answer : The purpose of guard ring in transmission lines is to reduce the earth capacitance of the lowest unit.

Which of the following is the demerit of a 'constant voltage transmission system' ? (a) Increase of short-circuit current of the system (b) Availability of steady voltage at all loads at the line terminals (c) Possibility of better protection for the line due to possible use of higher terminal reactants (d) Improvement of power factor at times of moderate and heavy loads (e) Possibility of carrying increased power for a given conductor size in case of long-distance heavy power transmission

Description : Which of the following is the demerit of a 'constant voltage transmission system' ? (a) Increase of short-circuit current of the system (b) Availability of steady voltage at all loads at ... of carrying increased power for a given conductor size in case of long-distance heavy power transmission

Last Answer : (a) Increase of short-circuit current of the system

requirements or properties of the line supports used in transmission and distribution.

Description : requirements or properties of the line supports used in transmission and distribution.  

Last Answer : Following are requirements or properties of the line supports used in transmission and distribution. 1. High mechanical strength:-  It should have high mechanical strength to withstand against - ... . 8. Appearance: It should have good appearance or They must be of pleasing shape

Why is there no formula to compute the half-life of any given radioisotope?

Description : Why is there no formula to compute the half-life of any given radioisotope?

Last Answer : I don’t think the theories contain enough information about what is actually going on with subatomic particles that leads to those results.

Constant voltage transmission entails the following disadvantage (a) large conductor area is required for same power transmission (b) short-circuit current of the system is increased (c) either of the above (d) none of the above

Description : Constant voltage transmission entails the following disadvantage (a) large conductor area is required for same power transmission (b) short-circuit current of the system is increased (c) either of the above (d) none of the above

Last Answer : (b) short-circuit current of the system is increased

What are the factors that limit the maximum power transfer capability in a transmission line?

Description : What are the factors that limit the maximum power transfer capability in a transmission line?

Last Answer : Answer: Some of the factors which limits the maximum power transfer are: 1. Electrical phase shift 2. Voltage drop 3. Thermal effects in the line