Two transformers A and B having equal outputs and voltage ratios but unequal percentage impedances of 4 and 2 are operating in parallel. The transformer A will be overloaded by 

1 Answer

Answer :

Two transformers A and B having equal outputs and voltage ratios but unequal percentage impedances of 4 and 2 are operating in parallel. The transformer A will be overloaded by 33%

Related questions

Description : Which of the following connection of transformers will give highest value of secondary voltage ? (A) Delta primary delta secondary (B) Delta primary star secondary (C) Star primary star secondary (D) Star primary delta secondary

Last Answer : Which of the following connection of transformers will give highest value of secondary voltage ? (A) Delta primary delta secondary (B) Delta primary star secondary (C) Star primary star secondary (D) Star primary delta secondary

Description : Two transformers are connected in parallel. These transformers do not have equal percentage impedance. This is likely to result in?

Last Answer : Two transformers are connected in parallel. These transformers do not have equal percentage impedance. This is likely to result in loading of the transformers not in proportion to their kVA ratings.

Last Answer : Current transformers (CT) : Current transformer (CT) actually step down the high current to low current for the operation of relays. Current transformer is use for measurement of ... use for relay. This is about potential transformer.

Description : If the percentage impedances of the two transformers working in parallel are different, then?

Last Answer : If the percentage impedances of the two transformers working in parallel are different, then parallel operation will still be possible, but the power factors at which the two transformers operate will be different from the power factor of the common load.

Description : Two 3-phase transformers cannot be operated in parallel, if their :  (A) kVAs are different (B) phase sequences are different (C) % impedances are different (D) voltage ratios are different

Last Answer : Two 3-phase transformers cannot be operated in parallel, if their : phase sequences are different

Description : Core type transformers are popular in___________.  (A) High voltage applications (B) Low voltage applications (C) All of the above (D) None of the above

Last Answer : Core type transformers are popular in High voltage applications

Description : The friction losses in Real Transformers are :  (A) 0% (B) 5% (C) 25% (D) 50%

Last Answer : A

Description : Which of the following is the advantage of using CRGO steel in transformers? A) High magnetic flux density B) Low permeability C) Both A and B D) None of these

Last Answer : It definitely High Magnetic Flux Density since a crgo steel has always a more around 3% of silicon proportion among the remaining ferrite which make cold rolled grain oriented steel having high flux magnetic ... for more about the crgo core you can learn here https://nicoreindia.com/crgo-core/

Description : The efficiency of two identical transformers under load conditions can be determined by?

Last Answer : The efficiency of two identical transformers under load conditions can be determined by back-to-back test.

Description : 74)Power transformers are generally designed to have maximum efficiency around A. No load B. Half load C. Near full load D. 10% overload

Last Answer : C. Near full load

Description : [23] Transformers are rated in KVA instead of KW because A. load power factor is often not known B. KVA is fixed whereas KW depends on load power factor C. Total transformer loss depends on volt ampere D. It has become customary

Last Answer : C. Total transformer loss depends on volt ampere

Description : TRANSFORMERS MCQ

Last Answer : 101. A shell-type transformer has (a) high eddy current losses (b) reduced magnetic leakage (c) negligibly hysteresis losses (d) none of the above Ans: b 102. A transformer can have regulation closer to zero (a ... (6) much smaller (c) much higher (d) somewhat smaller (e) none of the above Ans: c

Description : What are the schedules of maintenance done on transformers?

Last Answer : Ans. Following are the schedules of maintenance on transformers. a. Daily maintenance. b. Monthly maintenance. c. Quarterly maintenance. d. Half yearly maintenance. e. Yearly maintenance. f. 5 Yearly maintenance.

Description : Why a transformer requires cooling. What are the methods of cooling transformers?

Last Answer : Ans. Transformers requires cooling as they get heated up due to various losses taking place in the transformer. (like iron of copper losses) Following are the methods of cooling of transformer. a. Natural ... . Forced oil air Natural Cooling (OFAN). d. Forced oil and forced Air cooling (OFAF).

Description : What are the loses in Transformers, Explain?

Last Answer : Ans. (1) Iron loses (2) Copper loses Iron Loss : Iron loss occurs in the transformers Iron core due to hysteresis and eddy currents taking place. They are almost fixed irrespective of ... losses in the primary and the secondary windings of the transformer which with the loading of transformer.

Description : Classify the transformers based on the construction, frequency and power.

Last Answer : Classification of Transformer Based On: i) Construction: Shell type, Core type, Berry type ii) Change in voltage level: Step-Up, Step-Down, iii) Number of phases: Single phase, Three phase iv) ... Control vi) Cooling: Self-cooled, Air-cooled, Forced-air cooled, Oil-cooled, Forced-oil cooled. 

Description : In a transmission line if booster transformers are to be used, preferred location will be  (A) At the receiving end (B) At the sending end (C) At the intermediate point (D) Anywhere in the line 

Last Answer : In a transmission line if booster transformers are to be used, preferred location will be At the intermediate point

Description : An additional condition for parallel operation of three-phase transformers over single-phase transformers is that

Last Answer : An additional condition for parallel operation of three-phase transformers over single-phase transformers is that the transformers should belong to the same vector group

Last Answer : Instrument transformers are potential transformers, current transformers.

Last Answer : Natural oil cooling is used for transformers up to a rating of 3000 kVA.

Last Answer : Distribution transformers are generally designed for maximum efficiency around 50% load.

Last Answer : Power transformers are generally designed to have maximum efficiency around near full-load.

Last Answer : Short circuit test on transformers is conducted to determine copper losses.

Last Answer : Necessary conditions required to be satisfied in order to ensure successful parallel operation of single phase transformers:  1. Only transformers having the same phase displacement between primary and secondary ... . 7. The phase sequence must be followed strictly on HV and LV side connection.

Last Answer : Natural air cooling is generally restricted for transformers up to 1.5 MVA .

Description : Losses which occur in rotating electric machines and do not occur in transformers are?

Last Answer : Friction losses windage losses 

Description : The efficiencies of transformers compared with that of electric motors of the same power are?

Last Answer : Transformers have high efficiency than the same ratted motors

Description : Why do transformers make noise?

Last Answer : Transformers make noise based on it out put if an transformer outputs is 400v maximum than a 398v be apply to that transformer it also make a noise because of that 

Description : In a D.C. 3-wire distributor using balancers and having unequal loads on the two sides (a) both balancers run as generators (b) both balancers run as motors (c) balancer connected to lightly- loaded side runs as a motor (d) balancer connected to heavily- loaded side runs as a motor

Last Answer : (c) balancer connected to lightly- loaded side runs as a motor

Description : Electro-mechanical voltage regulators are generally used in (a) reactors (b) generators (c) transformers (d) all of the above

Last Answer : (b) generators

Description : The total power of an AM transmitter having a carrier power of 50 W and the percentage of modulation at 80% is A) 50 W B) 66 W C) 68 W D) 70 W 

Last Answer : The total power of an AM transmitter having a carrier power of 50 W and the percentage of modulation at 80% is 66 W

Description : What is the percentage error when 3 resistors with ratings 100 Ω at 5%, 150 Ω at 6% and 250 Ω at 8% respectively, are connected in series? A) 6.33% B) 6.80% C) 19% D) None of these

Last Answer : What is the percentage error when 3 resistors with ratings 100 Ω at 5%, 150 Ω at 6% and 250 Ω at 8% respectively, are connected in series? A) 6.33% B) 6.80% C) 19% D) None of these

Description : Define transformation ratio in terms of current and voltage.

Last Answer : (i) Transformation Ratio (K) is defined as the ratio of the primary current to the secondary current.  (ii) Transformation Ratio (K) is defined as the ratio of the secondary voltage to the primary voltage.

Description : 5 The efficiency of a transformer is maximum when A. It runs at half full load B. it runs at full load C. its Cu loss equal iron loss D. it runs over load

Last Answer : C. Its cu loss equal iron loss

Description : What causes the differences in the percentage of the work force in different countries?

Last Answer : I blame demography.

Description : Idiocy admitted to, disclaimer disclaimed, now how do I figure out what the percentage of one number another number is?

Last Answer : Just divide it.

Description : How to Reduce Your Body Fat Percentage ?

Last Answer : How to Reduce Your Body Fat Percentage Losing weight doesn't only mean bringing down the numbers on your bathroom scale. Most of the time, people lose more muscles than fat because of misguided weight loss ... body you want. Lose weight safely. Don't fall into the pit of fast weight loss programs.

Description : A shopkeeper bought 1800 blackberry and 1200 blueberry. He found 45% of blackberry and 24% of blueberry were rotten. Find the percentage of fruits in good condition. a) 63.4 b) 32.9 c) 48.5 d) 56.3

Last Answer :  Answer: A Total number of fruits shopkeeper bought = 1800 + 1200 = 1000 Number of rotten blackberry = 45% of 1800  = 45/100 1800  = 81000/100  = 810 Number of rotten blueberry = 24% of 1200 ... Therefore Percentage of fruits in good condition = (1902/3000 100)  = (190200/3000)  = 63.4%

Description : In an election three candidates received 2272 , 15272, and 23256 votes respectively. What percentage of the total votes did the winning candidate got? a) 25 b) 41 c) 75 d) 57 e) 93

Last Answer : Answer: D Total number of votes polled = (2272+15272+23256)  =40800 Required percentage = 23256/40800 ×100  = 2325600/40800  = 57

Description : A wooden manufacturing company declares that a wooden is now available for $11200 as against $25200 one year before. Find the percentage reduction in the price of wooden offered by the company. a) 25 1/3 b) 691/3 c) 66 1/3 d) 33 1/3 e) 55 5/9

Last Answer : Answer: E Price of the wooden a year before = $25200 Price of the wooden after a year = $11200 Decrease in price = $(25200 - 11200) = $14000 Therefore, decrease % = 14000/25200 × 100 %  = 55 5/9 %

Description : The population in a small town increases from 50000 to 63750 in one year. Find the percentage increase in population. a) 25 b) 62 c) 6.25 d) 27.5 e) 59.8 

Last Answer : Answer: D Population in a small town last year = 50000 Population in a small town after one year = 63750 Increase in population = 63750 - 50000 = 13750 Therefore,  percentage increase in population = ... /50000 100  = 1375000/50000  = 27.5% Thus, the increase in population is 27.5%

Description : The price of dhal is increased from $ 30 to $ 37.5 per kg. Find the percentage increase in price. a) 25 b) 60 c) 45 d) None e) 98 

Last Answer : Answer: A Price of dhal before = $30 Price of dhal now = $ 37.5 Increase in dhal = current price - original price  = $37.5 - $ 30  = $ 7.5 Therefore, percentage increase in price = Increase in price/ ...  = 7.5 / 30 100 = 750/100 = 25 % Thus, increase in price= 25 %

Description :  In a test, minimum passing percentage for girls and boys is 60% and 25% respectively. A boy scored 560 marks and failed by 160 marks. How many more marks did a girl require to pass in the test if she scored 216 marks ? a) 2123 b) 1512 c) 2251 d) 1325 e) 3989

Last Answer : Answer: B  Total marks in the test = (560 + 160) × 100 /25  = 720 ×100/25  = 72000/25  = 2880  Passing marks for girls =2880 × 60/100  = 1728  Required marks = 1728 – 216  = 1512

Description : A mixture of 90 kg of rava and sugar contains 90% of sugar. The new mixture is formed by adding 30 kg of sugar. What is the percentage of sugar in the new mixture? a) 45 1/2 b) 60 1/5 c) 45 1/2 d) 92 1/2 e) 98 1/2

Last Answer : Answer: D 90 kg = 81 kg sugar 9 kg rava Adding = 30 kg sugar Total = 111kg sugar 9kg rava (new)  111/120 × 100 = 92.5 =92 1 /2

Description : A mixture of 60 kg of rice and dhal contains 60% of dhal. The new mixture is formed by adding 15 kg of dhal. What is the percentage of rice in the new mixture? a) 25 b) 64 c) 45 d) 32 e) 98 

Last Answer : Answer: D 60 kg = 36 kg dhal 24 kg rice -------- 15 kg dhal Total = 15 kg dhal 24 kg rice (new) 24/75×100=32%

Description : Gugan obtained a total of 1313 marks out of 1400 in an examination. What is his approximate percentage in the examination? a) 25 b) 60 c) 45 d) None e) 98

Last Answer : Answer: D Required percentage = 1313/ 1400 × 100 =131300/1400 =93.7

Description : Nesha scored 120 out of 150 in English, 120 out of 180 in mathematics and 160 out of 200 in Science. Find Nesha’s score as percentage: (i) in Mathematics (ii) in all the three subjects (on the whole). a) 66 2/3, 78 22/51 b) 71 23/5, 45 7/31 c) 54 13/33, 82 3/4 d) 60 3/4, 76 32/41 

Last Answer :  Answer: A (i) Percentage scored in Mathematics = 120/180 100  = 12000/180  =1200/18  = 66 2 /3 % (ii) Total maximum of all the three subjects = 150 + 160 + 200 = 510 and Total score in the ... percentage on the whole = (400/510 100)  = (40000/510)  = 4000/51  = 78 22/51 %

Description : Nandhini scored 996 marks out of 1200 marks and her elder brother kaviyarasan scored 1020 marks out of 1500 marks. Find the scored percentage which is better? a) 68% b) 83% c) 65% d) 85% e) 97%

Last Answer : Answer: A Percentage of marks scored by nandhini = (994/1200 × 100)  = (99400/1200)  = (994/12)  = 83 % Percentage of marks scored by kaviyarasan = (1020/1500 × 100)  = (102000/1500)  = (1020/15)  = 68 % Hence, the percentage marks scored by nandhini is better.

Description : True value has been 50 whereas measured value is 40 then the percentage error in the reading will be ______.  (A) 20% (B) 40% (C) 50% (D) 30%

Last Answer : True value has been 50 whereas measured value is 40 then the percentage error in the reading will be 20%.