Description : Dark current in light detectors is caused by ∙ a. Thermally generated carriers in the diode ∙ b. The absence of light input ∙ c. Small leakage current ∙ d. Its imperfection
Last Answer : a. Thermally generated carriers in the diode
Description : The leakage current that flows through a photodiode with no light input ∙ A. dark voltage ∙ B. dark impedance ∙ C. dark power ∙ D. dark current
Last Answer : D. dark current
Description : A pn-junction diode emits light by spontaneous emission ∙ A. LED ∙ B. APD ∙ C. PIN
Last Answer : A. LED
Description : Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode
Last Answer : Avalanche photodiode
Last Answer : D. Avalanche photodiode
Description : Which of the following is the fastest light sensor ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Phototransistor ∙ d. Avalanche photodiode
Last Answer : ∙ d. Avalanche photodiode
Description : Which of the following is NOT a common light detector ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Photodiode ∙ d. Avalanche photodiode
Last Answer : ∙ b. Photovoltaic diode
Description : . Is a non-coherent light source foe optical communications system. ∙ a. ILD ∙ b. LED ∙ c. APD ∙ d. PIN Diode
Last Answer : ∙ b. LED
Description : Which of the following is used as an optical transmitter on the Fiber Optical Communications? ∙ a. APD ∙ b. LSA diode ∙ c. PIN diode ∙ d. LED
Last Answer : d. LED
Description : The term responsivity as it applies to a light detector is best described as ∙ A. the time required for the signal to go from 10 to 90 percent of maximum amplitude ∙ B. the ratio of the diode ... . the ratio of the input power to output power ∙ D. the ratio of output current to input current
Last Answer : the ratio of the diode output current to the input optical power
Description : The upper pulse rate and information-carrying capacity of a cable is limited by ∙ A. pulse shortening ∙ B. attenuation ∙ C. light leakage ∙ D. modal dispersion
Last Answer : D. modal dispersion
Description : The upper pulse rate and information carrying capacity of a cable is limited by ∙ a. Pulse shortening ∙ b. Attenuation ∙ c. Light leakage ∙ d. Modal dispersion
Last Answer : ∙ d. Modal dispersion
Description : What parameter of light detector determines the range or system length that can be achieved for a given wavelength? ∙ a. Transit time ∙ b. Spectral response ∙ c. Dark current ∙ d. Responsitivity
Last Answer : ∙ b. Spectral response
Description : A ____________________ diode is the usual light detector for single-mode
Last Answer : PIN
Description : A ____________________ diode is the usual light source for single-mode cable.
Last Answer : laser
Description : The range of wavelength values that a given photodiode will respond. ∙ A. spectral response ∙ B. permeance ∙ C. dark current ∙ D. reluctance
Last Answer : A. spectral response
Description : A measure of conversion efficiency of a photodetector. ∙ A. Efficiency ∙ B. Responsivity ∙ C. Dark current ∙ D. Spectral response
Last Answer : B. Responsivity
Description : Which optical detector is used when high sensitivity and bandwidth are required? ∙ a. PMT ∙ b. APD ∙ c. PIN ∙ d. Phototransistor
Last Answer : a. PMT
Description : One of the following is not a solid-state optical detector ∙ a. APD ∙ b. PIN ∙ c. PMT ∙ d. Phototransistors
Last Answer : . PMT
Description : The speed of light is ∙ a. 186,000 mi/h ∙ b. 300 mi/h ∙ c. 300,000 m/s ∙ d. 300,000,000 m/s
Last Answer : ∙ b. 300 mi/h
Description : Which of the following is used as an optical receiver in fiber optics communications ∙ a. APD ∙ b. Tunnel diode ∙ c. Laser diode ∙ d. LED
Last Answer : a. APD
Description : The speed of light in plastic compared to the speed of light in air is ∙ A. less ∙ B. more ∙ C. the same ∙ D. zero
Last Answer : A. less
Description : Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ A. less than ∙ B. greater than ∙ C. equal to ∙ D. zero
Last Answer : ∙ B. greater than
Last Answer : In Reverse bias of diode when the cathode is connected to positive and anode is connected to negative very small current flows this very small current is known as leakage current of diode.
Description : It is described as the flow of light energy past a given point in a specified time ∙ A. Optical radiation ∙ B. Optical impedance ∙ C. Optical illusion ∙ D. Optical power
Last Answer : D. Optical power
Description : The term critical angle describes ∙ A. the point at which light is refracted ∙ B. the point at which light becomes invisible ∙ C. the point at which light has gone from the refractive mode ... reflective mode ∙ D. the point at which light has crossed the boundary layers from one index to another
Last Answer : C. the point at which light has gone from the refractive mode to the reflective mode ∙
Description : The loss in single-mode fiber-optic cable due to the glass is about: a. 40 dB per km b. 4 db per km c. 0.4 dB per km d. zero loss
Last Answer : c. 0.4 dB per km
Description : The quantum of light is called: a. an erg b. an e-v c. a photon d. a phonon
Last Answer : c. a photon
Description : Is a non-coherent light source foe optical communications system. a. ILD b. LED c. APD d. PIN Diode
Last Answer : b. LED
Description : The most common device used as a light detector in fiber optic communications system. A. LED B. Darlington phototransistor C. APDs D. PIN diode
Last Answer : C. APDs
Description : A non-coherent light source for optical communications system. A. PIN Diode B. ILD C. APD D. LED
Last Answer : D. LED
Description : The quantum of light is called the ____________________.
Last Answer : photon
Description : The ratio of the speed of light in air to the speed of light in another substance is called ∙ A. speed factor ∙ B. index of reflection ∙ C. index of refraction ∙ D. speed gain
Last Answer : ∙ B. index of reflection
Description : Single frequency light is called ∙ A. pure ∙ B. intense ∙ C. coherent ∙ D. monochromatic
Last Answer : D. monochromatic
Description : Single-frequency light is called ∙ a. Pure ∙ b. Intense ∙ c. Coherent ∙ d. Monochromatic
Last Answer : d. Monochromatic
Description : The ratio of speed of light in air to the speed of light in another substance is called the ∙ a. Speed factor ∙ b. Index of reflection ∙ c. Index of refraction ∙ d. Dielectric constant
Last Answer : b. Index of reflection
Description : The loss in signal power as light travels down a fiber is called ∙ a. Dispersion ∙ b. Scattering ∙ c. Absorption ∙ d. Attenuation
Last Answer : ∙ d. Attenuation
Description : Dense ____________________ allows many different wavelengths of light to share a cable.
Last Answer : WDM
Description : For safety, you should never ____________________ at the end of an optical fiber unless you know it is not connected to a light source.
Last Answer : look
Description : A ____________________ is a short length of fiber that carries the light away from the source
Last Answer : pigtail
Description : With optical fiber, ____________________ light is more common than visible light.
Last Answer : infrared
Description : Refraction is the ∙ A. bending of light ∙ B. reflection of light waves ∙ C. distortion of light waves ∙ D. diffusion of light waves
Last Answer : A. bending of light
Description : The main benefit of light wave communications over microwaves or any other communications media are ∙ A. lower cost ∙ B. better security ∙ C. wider bandwidth ∙ D. freedom from interface
Last Answer : C. wider bandwidth
Description : EMD is best described by which statement? ∙ A. 70 percent of the core diameter and 70% of the fiber NA should be filled with light. ∙ B. 70 percent of the fiber diameter and 70% of the ... be measured at the output. ∙ D. 70 percent of the unwanted wavelengths should be attenuated by the fiber.
Last Answer : 70 percent of the core diameter and 70% of the fiber NA should be filled with light.
Description : A popular light wavelength fiber-optic cable is ∙ A. 0.7 micrometer ∙ B. 1.3 micrometer ∙ C. 1.5 micrometer ∙ D. 1.8 micrometer
Last Answer : B. 1.3 micrometer
Description : The minimum optical power a light detector can receive and still produce a usable electrical output signal. ∙ A. light responsivity ∙ B. light sensitivity ∙ C. light collectivity ∙ D. illumination
Last Answer : B. light sensitivity
Description : The time it takes a light induced carrier travel across the depletion region of the semiconductor. ∙ A. dispersion ∙ B. response time ∙ C. irradiance ∙ D. transit time
Last Answer : D. transit time
Description : How can modal dispersion reduced entirely? ∙ A. Use a graded index fiber ∙ B. Use a single-mode fiber ∙ C. Use a monochromatic light source ∙ D. Use a very sensitive light detector
Last Answer : Use a single-mode fiber
Description : It is caused by the difference in the propagation time of light rays that take different paths down the fiber. ∙ A. modal dispersion ∙ B. microbending ∙ C. Rayleigh scattering ∙ D. chromatic dispersion
Last Answer : A. modal dispersion
Description : As light is coupled in a multiport deflective device, the power is reduced by ∙ A. 1.5 dB ∙ B. 0.1 dB ∙ C. 0.5 dB ∙ D. 0.001 dB
Last Answer : C. 0.5 dB