In the measurement of power by two wattmeter method, when the readings of the two

In the measurement of power by two wattmeter method, when the readings of the two wattmeters are equal, the power factor is

(A) Zero

(B) Leading

(C) Lagging

(D) Unity
by

1 Answer

Answer :

In the measurement of power by two wattmeter method, when the readings of the two wattmeters are equal, the power factor is Unity

by

Related questions

In the measurement of power of balanced load by two wattmeter method in a 3-phase circuit, The readings

Description :  In the measurement of power of balanced load by two wattmeter method in a 3-phase circuit, The readings of the wattmeters are 4 kW and 2 kW respectively, the later is being taken after reversing the connections of current coil. the ... kVAR B) 0.2 & 6 √3 kVAR C) 0.32 & 2 kVAR D) 0.32 & 2 √3 kVAR

Last Answer :  In the measurement of power of balanced load by two wattmeter method in a 3-phase circuit, The readings of the wattmeters are 4 kW and 2 kW respectively, the later is being taken after reversing the ... of current coil. the power factor and reactive power of the load is 0.2 & 6 √3 kVAR

In a 3-phase power measurement by two wattmeter method, both the wattmeters had identical readings...

Description : In a 3-phase power measurement by two wattmeter method, both the watt meters had identical readings. The power factor of the load was?

Last Answer : In a 3-phase power measurement by two wattmeter method, both the watt meters had identical readings. The power factor of the load was unity.

For power measurement of three phase circuit by two wattmeter method, when the value of power factor

Description : For power measurement of three phase circuit by two wattmeter method, when the value of power factor is less than 0.5 lagging:

Last Answer : For power measurement of three phase circuit by two wattmeter method, when the value of power factor is less than 0.5 lagging: One of the wattmeter connections will have to be reversed

Measurement of power and power factor of a 3-phase system by two wattmeter method can be

Description : Measurement of power and power factor of a 3-phase system by two wattmeter method can be obtained in case of  1. Balanced load and balanced source  2. Balanced source with 3-phase 3-wire unbalanced load  3. Unbalanced source with 3-phase 3 ... b) 2, 3 and 5 (c) 1, 2, 3, 4 and 5 (d) 1, 2, 3 and 5 

Last Answer : Measurement of power and power factor of a 3-phase system by two wattmeter method can be obtained in case of  1. Balanced load and balanced source  2. Balanced source with 3-phase 3-wire unbalanced load  3. Unbalanced source with 3- ... b) 2, 3 and 5 (c) 1, 2, 3, 4 and 5 (d) 1, 2, 3 and 5 

In the case of power measurement by two wattmeter method in a balanced 3Φ system with a pure inductive load

Last Answer : In the case of power measurement by two wattmeter method in a balanced 3Φ system with a pure inductive load both the Wattmeter will indicate the same but of opposite sign.

In a 3-phase power measurement by two wattmeter method the reading of one of the wattmeter was zero...

Description : In a 3-phase power measurement by two wattmeter method the reading of one of the wattmeter was zero. The power factor of the load must be?

Last Answer : In a 3-phase power measurement by two wattmeter method the reading of one of the wattmeter was zero. The power factor of the load must be 0.5.

The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are

Description : The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are 8 kW and 4 kW. The power factor of the load is (A) zero (B) 0.5 (C) between zero and 0.5 (D) between 0.5 and unity

Last Answer : The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are 8 kW and 4 kW. The power factor of the load is between 0.5 and unity

While measuring power in a three phase load by two wattmeter method, the reading of two wattmeter are

Description : While measuring power in a three phase load by two wattmeter method, the reading of two wattmeter are equal and opposite, when (a) load is balanced (b) power factor is unity (c) phase angle is between 60° to 90° (d) the load is purely inductive 

Last Answer :  Option (d)  Load is purely inductive 

Explain the effect of power factor on wattmeter reading in two wattmeter method for power measurement.

Description : Explain the effect of power factor on wattmeter reading in two wattmeter method for power measurement.

Last Answer : Effect of P.F. on Reading of Wattmeter in Two Wattmeter Method:

State any two disadvantages of one wattmeter method of measurement of 3 phase power.

Description : State any two disadvantages of one wattmeter method of measurement of 3 phase power.

Last Answer : State any two disadvantages of one wattmeter method of measurement of 3 phase power. Disadvantages of one wattmeter method:- 1. Only used for balanced load 2. It can not be used for ... connection then neutral point must be available 4. Delta connection must be opened to connect current coil.

In two -wattmeter method of power measurement, if one wattmeter shows negative reading, then the...

Description : In two -wattmeter method of power measurement, if one wattmeter shows negative reading, then the power factor of the circuit is treated as (A) Unity (B) Lagging (C) Leading (D) Zero

Last Answer : Lagging   power   factor.

Consider the following statements 1) The compensating coil of a low power factor wattmeter compensates

Description : Consider the following statements  1) The compensating coil of a low power factor wattmeter compensates the effect of the impedance of the current coil ii) The compensating coil of a low power factor wattmeter compensates the effect ... C) Both (i) and (ii) are true D) Both (i) and (ii) are false

Last Answer : A

The minimum number of wattmeter(s) required to measure 3-phase, 3-wire balanced or unbalanced power is

Description : The minimum number of wattmeter(s) required to measure 3-phase, 3-wire balanced or unbalanced power is  A) 1 B) 2 C) 3 D) 4

Last Answer : B

In a low power factor wattmeter the compensating coil is connected?

Last Answer : In a low power factor wattmeter the compensating coil is connected in series with pressure coil.

In a low power factor wattmeter the pressure coil is connected?

Last Answer : In a low power factor wattmeter the pressure coil is connected to the load side of the current coil.

Draw the circuit diagram for:- i) Measurement of active power in 3-phase load circuit using two wattmeter. ii) Measurement of reactive power in 3-phase load circuit using one wattmeter.

Description : Draw the circuit diagram for:- i) Measurement of active power in 3-phase load circuit using two wattmeter. ii) Measurement of reactive power in 3-phase load circuit using one wattmeter.

Last Answer : (i) Measurement of active power in 3- phase load circuit using two- wattmeter: (ii) Measurement of reactive power in 3- phase load circuit using one wattmeter

Draw and explain the circuit diagram for measurement of single phase power using dynamometer type wattmeter.

Description : Draw and explain the circuit diagram for measurement of single phase power using dynamometer type wattmeter. 

Last Answer : Circuit diagram for measurement of single phase power using dynamometer type wattmeter: Explanation: It consists of two stationary coils, called current coils and one moving coil, called voltage or ... i.e. power. The meter can be calibrated directly to indicate the power in watts. 

The two watt meters measurement the ratio of two meter readings is –(1-sqrt3):( 1+sqrt3) then the power factor is a) 1 b) 0.866 c) 0.707 d) 0

Description : The two watt meters measurement the ratio of two meter readings is –(1-sqrt3):( 1+sqrt3) then the power factor is a) 1 b) 0.866 c) 0.707 d) 0

Last Answer : Ans: 0.707

In dynamometer type of wattmeter, which of the coil is split up into two parts?

Description :  In dynamometer type of wattmeter, which of the coil is split up into two parts?

Last Answer :  In dynamometer type of wattmeter, which of the coil is split up into two parts?  current coil

The pressure coil of a dynamometer type wattmeter is

Description : The pressure coil of a dynamometer type wattmeter is  A) Highly inductive B) Highly resistive C) Purely resistive D) Purely inductive

Last Answer : highly resistive

A wattmeter is connected as shown in the figure. The wattmeter reads

Description : A wattmeter is connected as shown in the figure. The wattmeter reads 

Last Answer : A wattmeter is connected as shown in the figure. The wattmeter reads Power consumed by Z2

Poynting vector wattmeter is based on

Description : Poynting vector wattmeter is based on   (A) Seebeck effect (B) Ferranti effect (C) Induction effect (D) Hall effect

Last Answer : Poynting vector wattmeter is based on Induction effect 

The torque produced in wattmeter is proportional to

Description : The torque produced in wattmeter is proportional to

Last Answer : A

The current coil of a wattmeter is connected to the CT of R-phase....

Description : The current coil of a wattmeter is connected to the CT of R-phase. The potential coil is connected across Y and B phases. The wattmeter measures

Last Answer : The current coil of a wattmeter is connected to the CT of R-phase. The potential coil is connected across Y and B phases. The wattmeter measures Reactive power of R phase.

Wattmeter cannot be designed on the principle of

Last Answer : Wattmeter cannot be designed on the principle of moving iron instrument.

The pressure coil of a wattmeter should be connected on the supply side of the current coil when?

Last Answer : The pressure coil of a wattmeter should be connected on the supply side of the current coil when load impedance is high.

An induction wattmeter can be used for?

Last Answer : An induction wattmeter can be used for A.C. 

A dynamometer wattmeter can be used for?

Last Answer : A dynamometer wattmeter can be used for both D.C. and A.C.

The resistance in the circuit of the moving coil of a dynamometer wattmeter should be?

Last Answer : The resistance in the circuit of the moving coil of a dynamometer wattmeter should be high.

The instrument for measurement of flow/ velocity is________. A. Bimetallic. C) Turbine meter. B. Manometer. D) Wattmeter

Description : The instrument for measurement of flow/ velocity is________. A. Bimetallic. C) Turbine meter. B. Manometer. D) Wattmeter

Last Answer : Turbine meter

Which of the following statements concerning monitoring techniques in the intensive care unit are true? A. Pulmonary artery and pulmonary capillary wedge pressure readings should be made at end inspiration, to minimize ventilatory artifacts. B. Continuous SvO 2 monitoring based on the technique of reflectance spectrophotometry has been shown to be accurate and reliable. C. Direct measurement of gastric intramucosal pH can be provided by gastrointestinal tonometry. D. Hyperlactatemia may be seen in a number of clinical conditions not associated with tissue hypoxia, including liver disease and hypermetabolic states.

Description : Which of the following statements concerning monitoring techniques in the intensive care unit are true? A. Pulmonary artery and pulmonary capillary wedge pressure readings should be made ... clinical conditions not associated with tissue hypoxia, including liver disease and hypermetabolic states.

Last Answer : Answer: BD DISCUSSION: Many different monitoring techniques may be used to assess the adequacy of therapy for shock. The pulmonary artery catheter can provide important hemodynamic and oxygen ... also be seen with liver disease, toxin ingestion, and hypermetabolic states not associated with shock

According to the classification of hypertension diagnosed in the older adult, hypertension that can be attributed to an underlying cause is termed a) secondary. Secondary hypertension may be caused by a tumor of the adrenal gland (e.g., pheochromacytoma). b) primary. Primary hypertension has no known underlying cause. c) essential. Essential hypertension has no known underlying cause. d) isolated systolic. Isolated systolic hypertension is demonstrated by readings in which the systolic pressure exceeds 140 mm Hg and the diastolic measurement is normal or near normal (less than 90 mm Hg).

Description : According to the classification of hypertension diagnosed in the older adult, hypertension that can be attributed to an underlying cause is termed a) secondary. Secondary hypertension may be caused by a tumor of ... mm Hg and the diastolic measurement is normal or near normal (less than 90 mm Hg).

Last Answer : a) secondary. Secondary hypertension may be caused by a tumor of the adrenal gland (e.g., pheochromacytoma).

Two wattmeter method is employed to measure power in a 3 -phase balanced system with the current coil ...

Description : Two wattmeter method is employed to measure power in a 3 -phase balanced system with the current coil connected in the A and C lines. The phase sequence is ABC. If the wattmeter with its current coil in A -phase line reads zero, then the power factor of the 3 -phase load will be

Last Answer : Two wattmeter method is employed to measure power in a 3 -phase balanced system with the current coil connected in the A and C lines. The phase sequence is ABC. If the wattmeter with its current coil in A -phase line reads zero, then the power factor of the 3 -phase load will be 0.5 lagging.

The power measurement in a balanced 3-phase circuit can be done by:

Last Answer : The power measurement in a balanced 3-phase circuit can be done by: One wattmeter method, Two wattmeter method, Three wattmeter method.

Commonly used instruments in power system measurement are?

Last Answer : Commonly used instruments in power system measurement are induction.

Merits of two wattmeter method

Description : Merits of two wattmeter method

Last Answer : Advantages of Two Wattmeter Method for 3-Phase Power Measurement: 1) It is used for balanced as well as unbalanced load. 2) For the star type load, it is not necessary to ... reactive volt-amperes for balanced loads also. 7) The circuit connections are independent of load connection.

Which of the following instruments can be used for measurement of very high value resistances such as

Description : Which of the following instruments can be used for measurement of very high value resistances such as insulation resistance in industries? A) Wheatstone bridge B) Megger C) Ohm-meter D) Resistive potentiometer 

Last Answer : Which of the following instruments can be used for measurement of very high value resistances such as insulation resistance in industries? A) Wheatstone bridge B) Megger C) Ohm-meter D) Resistive potentiometer 

The function of measurement system is/are _____.

Description : The function of measurement system is/are _____.

Last Answer : The function of measurement system are indicating, recording and controlling function.

The measurement range of an ammeter can be increased by using a:

Description : The measurement range of an ammeter can be increased by using a:

Last Answer : The measurement range of an ammeter can be increased by using a: low resistance in shunt

Clamp on ammeter is used for measurement of:

Description : Clamp on ammeter is used for measurement of:

Last Answer : Clamp on ammeter is used for measurement of: large alternating currents

Weins bridge is used for measurement of frequency in the applied voltage waveform is measurement of

Description : Weins bridge is used for measurement of frequency in the applied voltage waveform is measurement of frequency in the applied voltage waveform is   (A)sinusoidal (B) square (C) rectangular (D) triangular

Last Answer : Weins bridge is used for measurement of frequency in the applied voltage waveform is measurement of frequency in the applied voltage waveform is sinusoidal 

Integrating principle in the digital measurement is the conversion of

Description : Integrating principle in the digital measurement is the conversion of   (a) Voltage to time (b) Voltage to frequency (c) Voltage to current (d) Current to voltage

Last Answer : Integrating principle in the digital measurement is the conversion of Voltage to frequency

For measurement of radio frequency ac signals __________ type meter is used

Description : For measurement of radio frequency ac signals __________ type meter is used

Last Answer : For measurement of radio frequency ac signals thermo-couple type meter is used

Measurement of a non -electrical quantity involves the following four subsystems:

Description : Measurement of a non -electrical quantity involves the following four subsystems:  a) amplifier block b) display block c) instrumentation block d) transducer block  The correct, sequence in which these block occur is  (1) d,a,c,b (2) d, c, a, b (3) a, c, b, d (4) a, b, c, d

Last Answer : Measurement of a non -electrical quantity involves the following four subsystems:  a) amplifier block b) display block c) instrumentation block d) transducer block  The correct, sequence in which these block occur is d,a,c,b

The bridge most suited for measurement of a four-terminal resistance in the range of 0.001 Ohm to 0.1 Ohm

Description : The bridge most suited for measurement of a four-terminal resistance in the range of 0.001 Ohm to 0.1 Ohm (A) Wien’s bridge (B) Kelvin double bridge (C) Maxwell’s bridge (D) Shering Bridge

Last Answer : The bridge most suited for measurement of a four-terminal resistance in the range of 0.001 Ohm to 0.1 Ohm (A) Wien’s bridge (B) Kelvin double bridge (C) Maxwell’s bridge (D) Shering Bridge

Accurate measurement of very low resistances is possible with

Description : Accurate measurement of very low resistances is possible with (A) Megger (B) Wheatstone Bridge (C) Kelvin’s Double Bridge (D) Wagner’s Earthing Device

Last Answer : Accurate measurement of very low resistances is possible with Kelvin’s Double Bridge

A measure of the reproducibility of measurement is known as

Last Answer : A measure of the reproducibility of measurement is known as Precision.

The absolute measurement of resistance is done by

Last Answer : The absolute measurement of resistance is done by Lorenz method.

Why is a MISC meter not recommended for DC measurement?

Last Answer : MISC meter not recommended for DC measurement because the error is high due to the hysteresis effect.

Ryall crest voltmeter is used for measurement of

Last Answer : Ryall crest voltmeter is used for measurement of High AC voltage.