Description : Used to test a fiber optics splice ∙ a. Spectrum analyzer ∙ b. Oscilloscope ∙ c. Optical power meter ∙ d. Field strength meter
Last Answer : c. Optical power meter
Description : Which of the following is used as an optical receiver in fiber optics communications ∙ a. APD ∙ b. Tunnel diode ∙ c. Laser diode ∙ d. LED
Last Answer : a. APD
Description : Which of the following contributes to the broadening of laser emission bandwidth? ∙ a. Doppler shift of moving atoms and molecules ∙ b. Amplification within the laser medium ∙ c. Coherence of the laser light ∙ d. Optical pumping of the laser transition
Last Answer : Doppler shift of moving atoms and molecules
Description : The process of decaying from one energy level to another energy level is called __________. ∙ A. Spontaneous emission ∙ B. Excited emission ∙ C. Absorption ∙ D. Any of these
Last Answer : A. Spontaneous emission
Description : He coined the term “fiber optics” in 1956. ∙ A. Kapany ∙ B. Kao ∙ C. Bockham ∙ D. Keck
Last Answer : ∙ A. Kapany
Description : Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal
Last Answer : ∙ a. It has high losses
Description : The following are the cause of light attenuation in fiber optics except ∙ a. Backscattering ∙ b. Absorption ∙ c. Refraction ∙ d. Microbends
Last Answer : c. Refraction
Description : In fiber optics, higher-order mode refers to ∙ a. Cladding boundary at high angle ∙ b. Backscattering electromagnetic signals ∙ c. Diffracting signals ∙ d. All of these
Last Answer : ∙ a. Cladding boundary at high angle
Description : Which of the following is a disadvantage for plastic fiber optics? ∙ a. Noise immunity ∙ b. Electric hazards ∙ c. Higher losses ∙ d. All of these
Last Answer : c. Higher losses
Description : Infrared range for fiber optics ∙ a. 400 – 700 nm ∙ b. 700 – 1200 nm ∙ c. 300 – 2000 nm ∙ d. 400 – 7000 nm
Last Answer : b. 700 – 1200 nm
Description : In fiber optics, SCS stands for ∙ a. Suppressed-clad-silicon ∙ b. Silicon base-class-silica ∙ c. Silica-clad-silica ∙ d. Serial-clad-silicon
Last Answer : c. Silica-clad-silica
Description : In fiber optics, PCS stands for ∙ a. Plastic-clad-silica ∙ b. Polyethylene-clad-silica ∙ c. Personal carrier system ∙ d. Personal communication
Last Answer : ∙ a. Plastic-clad-silica
Description : A dielectric waveguide for the propagation of electromagnetic energy at light frequencies ∙ a. Stripline ∙ b. Microstrip ∙ c. Laser beam ∙ d. Fiber optics
Last Answer : d. Fiber optics
Description : What is the insertion loss of connector-type splices for a single mode fiber optics? ∙ a. 0.51 dB ∙ b. 0.31 dB ∙ c. 0.49 dB ∙ d. 0.38 dB
Last Answer : d. 0.38 dB
Description : What is the average insertion loss of fusion splice in fiber optics? ∙ a. 0.09 dB ∙ b. 0.9 dB ∙ c. 0.19 dB ∙ d. 0.009 dB
Last Answer : ∙ b. 0.9 dB
Description : Light intensity is generally described in terms of __________ and measured in _________. ∙ A. Luminous flux density; Lumens per unit area ∙ B. Luminous flux intensity; Lumens per unit area ∙ C. Luminous flux density; Lumens per unit volume ∙ D. Luminous flux intensity; Lumens per unit volume
Last Answer : Luminous flux density; Lumens per unit area
Description : The process of moving from one energy level to another is called ____________. ∙ A. Spontaneous emission ∙ B. Excited emission ∙ C. Absorption ∙ D. Spontaneous decay
Last Answer : C. Absorption
Description : A pn-junction diode emits light by spontaneous emission ∙ A. LED ∙ B. APD ∙ C. PIN
Last Answer : A. LED
Description : They wrote a paper describing how it was possible to use stimulated emission for amplifying light waves (laser) as well as microwaves (maser). ∙ A. Theodore Maiman ∙ B. KC Kao and GA Bockham ∙ C. Charles Townes and Arthur Schawlow ∙ D. Kapron, Keck and Maurer
Last Answer : C. Charles Townes and Arthur Schawlow
Description : ____ is a light that can be coherent ∙ a. Spontaneous emission ∙ b. Monochromatic and in-phase ∙ c. Narrow beam divergence ∙ d. Monochromatic
Last Answer : ∙ b. Monochromatic and in-phase
Description : The first laser emitted ∙ a. Pulses of 694 nm red light ∙ b. A continuous red beam ∙ c. Pulses of white light from a helical flash lamp ∙ d. Spontaneous emission
Last Answer : ∙ a. Pulses of 694 nm red light
Description : Laser light is ______ emission. ∙ a. Coherent ∙ b. Stimulated ∙ c. Spontaneous ∙ d. Coherent and stimulated
Last Answer : ∙ d. Coherent and stimulated
Description : The minimum optical power a light detector can receive and still produce a usable electrical output signal. ∙ A. light responsivity ∙ B. light sensitivity ∙ C. light collectivity ∙ D. illumination
Last Answer : B. light sensitivity
Description : The term responsivity as it applies to a light detector is best described as ∙ A. the time required for the signal to go from 10 to 90 percent of maximum amplitude ∙ B. the ratio of the diode ... . the ratio of the input power to output power ∙ D. the ratio of output current to input current
Last Answer : the ratio of the diode output current to the input optical power
Description : For a single mode optical cable with 0.25 dB/km loss, determine the optical power 100 km from a 0.1-mW light source. ∙ A. -45 dBm ∙ B. -15 dBm ∙ C. -35 dBm
Last Answer : ∙ C. -35 dBm
Description : It is described as the flow of light energy past a given point in a specified time ∙ A. Optical radiation ∙ B. Optical impedance ∙ C. Optical illusion ∙ D. Optical power
Last Answer : D. Optical power
Description : In radiometric terms, it measures the rate at which electromagnetic waves transfer light energy ∙ A. Optical radiation ∙ B. Optical impedance ∙ C. Optical illusion ∙ D. Optical power
Description : The _____ is equal to the number of electrons emitted per second times the electron charge ∙ a. Intensity ∙ b. Optical power ∙ c. Photocurrent ∙ d. Responsitivity
Last Answer : c. Photocurrent
Description : Optical cable testers are used for ∙ a. Checking refractive index ∙ b. Light power out of a fiber ∙ c. Non-calibrated light into a fiber
Last Answer : b. Light power out of a fiber
Last Answer : ∙ b. Light power out of a fiber
Description : Which of the following is not a part of the optical spectrum? ∙ A. infrared ∙ B. ultraviolet ∙ C. visible color ∙ D. x-rays
Last Answer : ∙ D. x-rays
Description : For a 300-m optical fiber cable with a bandwidth distance product of 600 MHz-km, determine the bandwidth. ∙ A. 5 GHz ∙ B. 1 GHz ∙ C. 2 GHz
Last Answer : C. 2 GHz
Description : Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion
Last Answer : D. wavelength dispersion
Description : A type of index of an optical fiber that has no cladding and whose central core has a non-uniform refractive index. ∙ A. graded index ∙ B. multimode ∙ C. single mode ∙ D. step-index
Last Answer : ∙ A. graded index
Description : A type of index profile of an optical fiber that has a central core and outside cladding with a uniform refractive index ∙ A. multimode ∙ B. graded index ∙ C. step-index ∙ D. single mode
Last Answer : ∙ C. step-index
Description : The three major groups of the optical system are ∙ A. the components, the data rate and the response time ∙ B. the source, the link and the receiver ∙ C. the transmitter, the cable and the receiver ∙ D. the source, the link and the detector
Last Answer : B. the source, the link and the receiver
Description : Developed an optical fiber with losses less that 2 dB/km ∙ A. Kao and Bockham ∙ B. Maiman, Kao and Bockham ∙ C. Maiman and Schawlow ∙ D. Kapron, Keck and Maurer
Last Answer : ∙ A. Kao and Bockham
Description : The scientist who built the first optical maser ∙ A. Charles Townes ∙ B. GA Bockham ∙ C. Theodore Maiman ∙ D. ACS Van Heel
Last Answer : ∙ C. Theodore Maiman
Description : Approximately what is the frequency limit of the optical fiber? ∙ A. 20 MHz ∙ B. 1 MHz ∙ C. 100 MHz ∙ D. 40 GHz
Last Answer : ∙ D. 40 GHz
Description : Which modulation methods are the most widely used in optical systems? ∙ a. Phase and frequency modulations ∙ b. Polarization modulation and phase modulation ∙ c. Intensity modulation and phase modulation ∙ d. Intensity modulation and polarization modulation
Last Answer : Intensity modulation and polarization modulation
Description : What is the frequency limit of an optical fiber? ∙ a. 20 GHz ∙ b. 30 GHz ∙ c. 40 GHz ∙ d. 50 GHz
Last Answer : ∙ c. 40 GHz
Description : Which optical detector is used when high sensitivity and bandwidth are required? ∙ a. PMT ∙ b. APD ∙ c. PIN ∙ d. Phototransistor
Last Answer : a. PMT
Description : Optical detectors are square-law devices because they respond to _____ rather than amplitude ∙ a. Intensity ∙ b. Light ∙ c. Density ∙ d. Photon
Last Answer : a. Intensity
Description : One of the following is not a solid-state optical detector ∙ a. APD ∙ b. PIN ∙ c. PMT ∙ d. Phototransistors
Last Answer : . PMT
Description : In solid-state optical detectors, the excited charge is transported in the solid by ∙ a. Holes and protons ∙ b. Holes and electrons ∙ c. Anion and cation ∙ d. Protons and photons
Last Answer : ∙ b. Holes and electrons
Description : Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8
Last Answer : ∙ a. 5
Description : Light traveling in optical fiber follows which of the following principles. ∙ a. Huygen’s principle ∙ b. Reflection theory ∙ c. Light theory ∙ d. Snell’s law
Last Answer : d. Snell’s law
Description : An increase in light intensity produces fast optic switching due to ∙ a. Increase in index of glass ∙ b. Amplification of optical signal ∙ c. High gain ∙ d. Photoconductivity
Last Answer : b. Amplification of optical signal
Description : An IC that represents a short distance one-way optical communications ∙ a. Optoisolator ∙ b. Insulator ∙ c. Multivibrator ∙ d. Optical IC
Last Answer : a. Optoisolator
Description : Which is not a possible cause of optical fiber loss? ∙ a. Impurities ∙ b. Glass attenuation ∙ c. Stepped index operation ∙ d. Microbending
Last Answer : ∙ c. Stepped index operation