In lag compensator the damping ratio, gain and steady state error (ess) are

In lag compensator the damping ratio, gain and steady state error (ess) are 

 (a) Decreases, Decreases and Increases (b) Decreases, Increases and Increases (c) Increases, Increases and Decreases (d) Increases, Decreases and Decreases

by

1 Answer

Answer :

In lag compensator the damping ratio, gain and steady state error (ess) are Increases, Decreases and Decreases

by

Related questions

increases the steady state accuracy. (a) Integrator (b) Differentiator (c) Phase lead compensator (d) Phase lag compensator Ans:A 10.As a result of introduction of negative feedback which of the following will not decrease ? (a) Band width (b) Overall gain (c) Distortion (d) Instability

Description : increases the steady state accuracy. (a) Integrator (b) Differentiator (c) Phase lead compensator (d) Phase lag compensator Ans:A 10.As a result of introduction of negative feedback which of the following will not decrease ? (a) Band width (b) Overall gain (c) Distortion (d) Instability

Last Answer : Ans: A

Which of the following is CORRECT with respect to a LAG-LEAD compensator ?

Description : Which of the following is CORRECT with respect to a LAG-LEAD compensator ? (A) It is similar to PI controller (B) It acts as Band-pass filter (C) It is Second-order system with one zero, and two poles (D) It acts as a Band-reject filter

Last Answer : Which of the following is CORRECT with respect to a LAG-LEAD compensator ? (A) It is similar to PI controller (B) It acts as Band-pass filter (C) It is Second-order system with one zero, and two poles (D) It acts as a Band-reject filter

What is the steady state error of type-0 system for ramp input?

Description : What is the steady state error of type-0 system for ramp input?  A) ∞ B) A/K C) A/(1+K) D) 0

Last Answer : What is the steady state error of type-0 system for ramp input?  A) ∞ B) A/K C) A/(1+K) D) 0

How can the steady-state error in a system be reduced?

Description : How can the steady-state error in a system be reduced?  (1) By decreasing the type of system (2) By increasing system gain (3) By decreasing the static error constant (4) By increasing the input

Last Answer : How can the steady-state error in a system be reduced?  (1) By decreasing the type of system (2) By increasing system gain (3) By decreasing the static error constant (4) By increasing the input

In order to regulate steady state error to zero, in a negative feedback control system, one employs

Description : In order to regulate steady state error to zero, in a negative feedback control system, one employs

Last Answer : In order to regulate steady state error to zero, in a negative feedback control system, one employs Integral control

The steady state error of the system can be minimized by

Description : The steady state error of the system can be minimized by

Last Answer : The steady state error of the system can be minimized by increasing gain k

In a control system integral error compensation _______ steady state error.

Description : In a control system integral error compensation _______ steady state error.

Last Answer : In a control system integral error compensation minimizes steady state error.

The effect of error damping is to?

Description : The effect of error damping is to?

Last Answer : The effect of error damping is to reduce steady state error.

For a feedback control system of type 2, the steady error for a rap input is

Description : For a feedback control system of type 2, the steady error for a rap input is  A) Infinite B) Constant C) Zero D) Indeterminate

Last Answer : For a feedback control system of type 2, the steady error for a rap input is Zero 

In the case of steady state forced vibration at a resonance, the amplitude of vibration is A) Inversely proportional to damping coefficient B) Inversely proportional to damping ratio C) Inversely proportional to resonant frequency D) Directly proportional to resonant frequency

Description : In the case of steady state forced vibration at a resonance, the amplitude of vibration is A) Inversely proportional to damping coefficient B) Inversely proportional to damping ratio C) Inversely proportional to resonant frequency D) Directly proportional to resonant frequency

Last Answer : B) Inversely proportional to damping ratio

For a 2nd order servo system, the damping ratio δ = 0.5456 and undamped natural frequency is

Description : For a 2nd order servo system, the damping ratio δ = 0.5456 and undamped natural frequency is ωn = 31.6 rad/sec. The percent overshoot is  (a) 7.07 (b) 10.2 (c) 14.10 (d) 21.21

Last Answer : For a 2nd order servo system, the damping ratio δ = 0.5456 and undamped natural frequency is ωn = 31.6 rad/sec. The percent overshoot is 14.10

Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Description : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Last Answer : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is 16

A phase lag lead network introduces in the output?

Description : A phase lag lead network introduces in the output?

Last Answer : A phase lag lead network introduces in the output lag at low frequencies and lead at high frequencies.

The phase lag produced by transportation relays?

Description : The phase lag produced by transportation relays?

Last Answer : The phase lag produced by transportation relays increases linearly with frequency.

In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. A equal to B directly proportional to C inversely proportional to D independent of

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. A equal to B directly proportional to C inversely proportional to D independent of

Last Answer : C inversely proportional to

In steady state forced vibrations, the amplitude of vibrations at resonance is __________ damping coefficient. A. Equal to B. Directly proportional to C. Inversely proportional toD. Independent of

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is __________ damping coefficient. A. Equal to B. Directly proportional to C. Inversely proportional toD. Independent of

Last Answer : C. Inversely proportional to

n steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional to c) inversely proportional to d) independent of

Description : n steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional to c) inversely proportional to d) independent of

Last Answer : c) inversely proportional to

In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. (A) equal to (B) directly proportional to (C) inversely proportional to (D) independent of

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. (A) equal to (B) directly proportional to (C) inversely proportional to (D) independent of

Last Answer : (C) inversely proportional to

In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional toc) inversely proportional to d) independent of

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional toc) inversely proportional to d) independent of

Last Answer : c) inversely proportional to

In case of type-1 system steady state acceleration is?

Description :  In case of type-1 system steady state acceleration is?

Last Answer :  In case of type-1 system steady state acceleration is infinity.

______increases the steady state accuracy.

Description : ______increases the steady state accuracy.

Last Answer : Integrator increases the steady state accuracy.

The damping factor of a particular system is unity, the system response will be

Description : The damping factor of a particular system is unity, the system response will be

Last Answer : The damping factor of a particular system is unity, the system response will be critically damped

Define the following: 1) Speed of response 2) Lag 3) Fidelity 4) Dynamic Error.

Description : Define the following: 1) Speed of response 2) Lag 3) Fidelity 4) Dynamic Error. 

Last Answer : (1) Speed of Response: It is the rapidity with which an instrument responds to changes in the measured quantity.  (2) Lag : It is the retardation or delay in the response of an instrument ... with time and value indicated by instrument if no static error is assumed is called as dynamic error.

What are the advantages of ESS system ?

Description : What are the advantages of ESS system ?

Last Answer : Advantages of ESS system: Information system used at strategic level. Filters data for management. Helps in decision making. • Easily diagnoses associated vulnerabilities. করে Uses sophisticated Graphical User Interface .

What is the full form of ESS ?

Description : What is the full form of ESS ?

Last Answer : ESS - Full Executive Support System.

In IEEE 802.11, the ______ is a timerused for collision avoidance. A) NAV B) BSS C) ESS D) none of the above

Description : In IEEE 802.11, the ______ is a timerused for collision avoidance. A) NAV B) BSS C) ESS D) none of the above

Last Answer : NAV

The IEEE 802.11standardfor wireless LANs defines twoservices: ______and_______. A) BSS; ASS B) ESS; SSS C) BSS; ESS D) BSS; DCF

Description : The IEEE 802.11standardfor wireless LANs defines twoservices: ______and_______. A) BSS; ASS B) ESS; SSS C) BSS; ESS D) BSS; DCF

Last Answer : BSS; ESS

In IEEE 802.11, astation with ________ mobility can move from one ESS toanother. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Description : In IEEE 802.11, astation with ________ mobility can move from one ESS toanother. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Last Answer : ESS-transition

In IEEE 802.11, astation with ________mobility can move from one BSS toanother, but the movement is confined inside one ESS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Description : In IEEE 802.11, astation with ________mobility can move from one BSS toanother, but the movement is confined inside one ESS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Last Answer : no-transition

In IEEE 802.11, astation with ________ mobility iseither stationary (not moving) or moving only insidea BSS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Description : In IEEE 802.11, astation with ________ mobility iseither stationary (not moving) or moving only insidea BSS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Last Answer : no-transition

In IEEE 802.11, a___ is made of stationary or mobile wireless stations and anoptional central base station, known as the access point (AP). A) ESS B) BSS C) CSS D) none of the above

Description : In IEEE 802.11, a___ is made of stationary or mobile wireless stations and anoptional central base station, known as the access point (AP). A) ESS B) BSS C) CSS D) none of the above

Last Answer : BSS

. Which of the following physiological proc ess influence the herbicide selectivity? a). Absorption and translocation b). Deactivation c). Phytotoxicity d). All of these

Description : . Which of the following physiological proc ess influence the herbicide selectivity? a). Absorption and translocation b). Deactivation c). Phytotoxicity d). All of these

Last Answer : d). All of these

A resistor placed in parallel to the output of a power supply _____________. A. is a temperature compensator B. corrects power factor C. prevents excessive currents D. aids in output voltage regulation

Description : A resistor placed in parallel to the output of a power supply _____________. A. is a temperature compensator B. corrects power factor C. prevents excessive currents D. aids in output voltage regulation

Last Answer : Answer: D

In general, polyphase induction motors can be started on full line voltage by means of ______________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Description : In general, polyphase induction motors can be started on full line voltage by means of ______________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Last Answer : Answer: C

Low horsepower, polyphase, induction motors can be started with full voltage by means of _____________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Description : Low horsepower, polyphase, induction motors can be started with full voltage by means of _____________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Last Answer : Answer: C

A static VAR compensator is a

Description : A static VAR compensator is a (A) series connected thyristor based controller (B) shunt connected thyristor based controller (C) energy storage device (D) combined series–shunt connected controller 

Last Answer : Shunt connected thyristor based controller

Which of the following compensator will increase the bandwidth of the system:

Description : Which of the following compensator will increase the bandwidth of the system: (1) Phase lag (3) Lag-Iead (2) Phase lead (4) None of these

Last Answer : Which of the following compensator will increase the bandwidth of the system: (1) Phase lag (3) Lag-Iead (2) Phase lead (4) None of these

The transfer function of a phase lead compensator is found to be the form (s+z1 ) / (s + p1 ) and that...

Description : The transfer function of a phase lead compensator is found to be the form (s+z1 ) / (s + p1 ) and that of a lag compensator to be of the form (s+z2 ) / (s + p2 ). Then which of the following conditions must be satisfied?  ... (B) z1 > p1 and z2 < p2 (C) z1 < p1 and z2 < p2 (D) z1 < p1 and z2 > p2

Last Answer : A 

Static Synchronous Compensator (STATCOM)

Description : Static Synchronous Compensator (STATCOM)

Last Answer : Static Synchronous Compensator (STATCOM)  STATCOM stands for Static Synchronous Compensator or Condenser. It may be a source of reactive power or sink of reactive AC power. It can ... and Controllers etc. STATCOM have symmetric lead-lag capability. STATCOM have no moving part.

What is static var compensator ?

Description : What is static var compensator ?

Last Answer : Static VAR Compensator (SVC)  SVC are use for regulating transmission voltage and for improving power quality of industrial load. SVC is made from one or more banks ... system. Static VAR Compensator is more reliable than dynamic compensation scheme like synchronous condenser.

As shown in the illustration, the circuit which 'shapes' the linear output of the thrust lever so that the steady-state ship speed is linear with respect to that lever's setting is the _____________. EL-0095 A. 'pitch controller' B. 'error amplifier' C. 'function generator' D. 'servo amplifier'

Description : As shown in the illustration, the circuit which 'shapes' the linear output of the thrust lever so that the steady-state ship speed is linear with respect to that lever's setting is the _____________. EL-0095 A. 'pitch controller' B. 'error amplifier' C. 'function generator' D. 'servo amplifier'

Last Answer : Answer: C

The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Description : The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Last Answer : Ans: 1/11

What are the three constants associated with a steady state error.

Description : What are the three constants associated with a steady state error.

Last Answer : Positional error constant Velocity error constant Acceleration error constant

Define Steady state error.

Last Answer : The steady state error is defined as the value of error as time tends to infinity.

What is steady state error?

Description : What is steady state error?

Last Answer : The steady state error is the value of error signal e(t) when t tends to infinity.

A linear time -invariant control system with unsatisfactory steady state error is to be compensated...

Description : A linear time -invariant control system with unsatisfactory steady state error is to be compensated. Which is/are the correct type of cascade compensation to be provided ? 1. Lead 2. Lag 3. Lag -lead Select the correct answer using ... given below : (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

Last Answer : A linear time -invariant control system with unsatisfactory steady state error is to be compensated. Which is/are the correct type of cascade compensation to be provided ? 1. Lead 2. Lag 3. Lag -lead Select the correct answer using ... given below : (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

Error-rate damping is effective because the circuitry has the capability of ______________the amount of overshoot before it happens.

Description : Error-rate damping is effective because the circuitry has the capability of ______________the amount of overshoot before it happens.

Last Answer : Anticipating

The second derivative input signals modify which of the following? a) The time constant of the system b) Damping of the system c) The time constant and suppress the oscillations d) The gain of the system

Description : The second derivative input signals modify which of the following? a) The time constant of the system b) Damping of the system c) The time constant and suppress the oscillations d) The gain of the system

Last Answer : Ans: C

State the effect of compression ratio and turbulence on ignition lag.

Description : State the effect of compression ratio and turbulence on ignition lag.

Last Answer : Effect of engine variables on ignition lag  1) Compression ratio: A higher compression ratio increases the pressure and temperature of the working mixture and decreases the concentration of the residual gases. ... . For this reason. It becomes necessary to advance the spark timing at higher speed. 

If stability error for step input and speed of response be the criteria for design, what controller would you

Description : If stability error for step input and speed of response be the criteria for design, what controller would you recommend (1) P controller (2) PD controller (3) PI controller (4) PID controller

Last Answer : If stability error for step input and speed of response be the criteria for design, what controller would you recommend (1) P controller (2) PD controller (3) PI controller (4) PID controller