The four-quadrant dual operation requires

The four-quadrant dual operation requires 

(a) Two full converters in series 

(b) Two full converters connected back to back 

(c) Two full converters connected in parallel. 

(d) Two semiconverters connected back to back
by

1 Answer

Answer :

The four-quadrant dual operation requires Two full converters connected back to back 

by

Related questions

A four -quadrant operation requires two full converters connected in

Description : A four -quadrant operation requires two full converters connected in  (1) Series (3) Back to back (2) Parallel (4) Series Cascade

Last Answer : A four-quadrant operation requires two full converters connected in Parallel 

What is meant by four quadrant operation?

Description : What is meant by four quadrant operation?

Last Answer : A motor operate in two modes-motoring and braking. In motoring, it converts electrical energy into mechanical energy, which supports its motion. In braking, it works as a generator converting ... the motion. Motor can provide motoring and braking operations for both forward and reverse directions.

Explain two quadrant chopper.

Description : Explain two-quadrant chopper.........

Last Answer : Two quadrant chopper:  There are two semiconductor controllable switches in the two-quadrant chopper. Two quadrant type A chopper: The figure shows the type A chopper. Both the switch never turn on at ... 2 are turned on then Vo=Vs. When chopper 1 and chopper 2 are off then Vo=-Vs.

4-Quadrent operation of chopper I is positive but V is may be positive are negative operates in which quadrant a) 1 and 2 b) 2 and 3 c) 1 and 3 d) 1 and 4

Description : 4-Quadrent operation of chopper I is positive but V is may be positive are negative operates in which quadrant a) 1 and 2 b) 2 and 3 c) 1 and 3 d) 1 and 4

Last Answer : Ans: 1 and 4

With neat sketch explain four modes of operation of a TRIAC?

Description : With neat sketch explain four modes of operation of a TRIAC? 

Last Answer : Modes of operation of a TRIAC: There are four different operating modes of TRIAC:  1) MT2 and gate are positive with respect to terminal MT1(Mode1) : Here terminal MT2 is positive ... junction P2-N2 is forward biased, current carriers are injected and therefore, the TRIAC is turned on. 

When a seller requires that a dealer not handle competitors' products, the agreement is called a/an A. Exclusive distribution B. Exclusive dealing C. Control criterion D. Dual distribution

Description : When a seller requires that a dealer not handle competitors' products, the agreement is called a/an A. Exclusive distribution B. Exclusive dealing C. Control criterion D. Dual distribution

Last Answer : D. Dual distribution

To get minimum harmonic distortion in the output, a 34 to 34 cyclo-converter requires :

Description : To get minimum harmonic distortion in the output, a 3-Ф to 3-Ф cyclo-converter requires :  (A) 12 SCRs (B) 18 SCRs (C) 36 SCRs (D) 72 SCRs

Last Answer : To get minimum harmonic distortion in the output, a 3-Ф to 3-Ф cyclo-converter requires : 36 SCRs

State the purpose of four quadrant meter.

Description : State the purpose of four quadrant meter.

Last Answer : Purpose of four quadrant meter:  Four-quadrant meter is basically a bidirectional energy-meter with additional measurement facility. The purposes of four-quadrant meter are: 1) Measurement of energy/power ... and kVARh 3) Time-of-use metering: Bidirectional consumption and demand.

For a class D commutation, answer the following: i) Explain the operation with circuit diagram. ii) Interpret with waveforms.

Description : For a class D commutation, answer the following: i) Explain the operation with circuit diagram. ii) Interpret with waveforms.

Last Answer : Class D commutation: This is also called as auxiliary commutation because it uses an auxiliary SCR to switch the charged capacitor across conducting SCR to turn it off. In this scheme, the main ... make SCR1 forward biased and keep ready for next triggering. The above cyclic process is repeated.

Draw a symbol and neat labeling V-I characteristics of GTO and explain its operation.

Description : Draw a symbol and neat labeling V-I characteristics of GTO and explain its operation.

Last Answer : Ans: Symbol and V-I characteristics of GTO: Operation of GTO: i) As the applied anode to cathode voltage is increased above zero, very small current (leakage current) flows through the device. ... low voltage (VBRR). The reverse breakdown voltage is of the order of 20 to 30 volt only. 

Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Description : Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Last Answer : Single phase fully control bridge converter with RL load: 1. During positive half cycle of input voltage, T1 and T2 are forward biased and during negative half cycle, T3 and T4 are forward biased. Therefore, T1-T2 ... cycle till the firing of next pair of SCRs as shown in the waveform.

Give the effect of source impedance on converter operation.

Description : Give the effect of source impedance on converter operation.

Last Answer : Effect of source impedance on converter operation: For single-phase fully controlled bridge converter, the SCRs are triggered in pairs alternately. During positive half-cycle of input, SCRs T1 and T2 are triggered ... increases and as a consequence, the output dc voltage decreases. 

Explain the operation of UPS with a neat block diagram.

Description : Explain the operation of UPS with a neat block diagram.

Last Answer : Uninterruptible-Power-Supplies (UPS): A block diagram of UPS system is shown in figure. It essentially consists of four major components: i)Rectifier (or battery charger) ii) ... . Due to fast action requirement, transfer switch can be implemented by fast acting semiconductor devices.

Draw a neat diagram of 1Ф half wave controlled converter with RL load. Give its operation.

Description : Draw a neat diagram of 1Ф half wave controlled converter with RL load. Give its operation.

Last Answer : Single phase fully controlled half wave converter:  The circuit diagram of single-phase half-wave controlled rectifier with RL load and without freewheeling diode is shown in Fig. (a). The SCR T is ... , when again pulse is applied, the SCR is turned on & the above cycle is repeated. 

Explain the operation of RC triggering circuit with neat diagram.

Description : Explain the operation of RC triggering circuit with neat diagram.

Last Answer : RC triggering circuit: The RC half-wave triggering circuit is as shown in the figure. During negative halfcycle of supply voltage vs, the capacitor C charges through diode D2 and load, ... be triggered at 0° & 180° because the supply voltage is zero and less than finger voltage. 

Draw construction of SCR using two transistor model. Explain its operation.

Description : Draw construction of SCR using two transistor model. Explain its operation.

Last Answer : Two Transistor Model of SCR or Thyristor

Which of the following thyristors can be used for high frequency of operation?

Description : Which of the following thyristors can be used for high frequency of operation? A) TRIAC B) DIAC C) SCR D) GTO 

Last Answer : Which of the following thyristors can be used for high frequency of operation? A) TRIAC B) DIAC C) SCR D) GTO 

An additional condition for parallel operation of three-phase transformers over single-phase transformers is that

Description : An additional condition for parallel operation of three-phase transformers over single-phase transformers is that

Last Answer : An additional condition for parallel operation of three-phase transformers over single-phase transformers is that the transformers should belong to the same vector group

parallel operation of mosfet can be done more easily as compared to thyristor. why?

Description : parallel operation of MOSFET can be done more easily as compared to thyristor. why?

Last Answer : Parallel operation of MOSFET can be done more easily as compared to thyristor because the resistance of MOSFET is increases with increase in temperature. MOSFET have the positive temperature coefficient. In ... the parallel operation of MOSFET can be done more easily as compared to the thyristor.

Explain the series and parallel operation of MOSFET. Which is suitable and why ?

Description : Explain the series and parallel operation of MOSFET. Which is suitable and why?

Last Answer : Series operation of MOSFET: To increase voltage handling capability MOSFETs are connected in series. When the MOSFETs are connected in series each MOSFET should turn on and turn off ... on and turn off time and transconductance. Each MOSFET should share current equally.  

explain the parallel operation of IGBT?

Description : Also, highlight the problem faced during parallel operation.

Last Answer : Parallel operation of IGBT: Parallel operation of IGBT is done for obtaining high current rating. Paralleling of IGBT reduces conduction losses and thermal stress. IGBT combines the qualities of ... . IGBTs must share losses equally otherwise IGBT may get failure due to thermal differences.

A law that specifically requires the service of a duly registered electronics and communications engineer in the designing installation and construction, operation and maintenance of radio stations. A. Act 3846 B. LOl 1000 C. R.A. 5734 D. Dept. order 88

Description : A law that specifically requires the service of a duly registered electronics and communications engineer in the designing installation and construction, operation and maintenance of radio stations. A. Act 3846 B. LOl 1000 C. R.A. 5734 D. Dept. order 88

Last Answer : D. Dept. order 88

Total reflux in a distillation operation requires minimum (A) Reboiler load (B) Number of plates (C) Condenser load (D) All (A), (B) and (C)

Description : Total reflux in a distillation operation requires minimum (A) Reboiler load (B) Number of plates (C) Condenser load (D) All (A), (B) and (C)

Last Answer : (B) Number of plates

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it? (A) Electrical installation cost (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Description : Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of ... (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Last Answer : (D) Equipment insulation cost

Pick up the consideration to the taken while designing a hospital from the following: (A) The operation theatre unit to be detached as it requires sterilized zone but near the ward for the patients and doctor (B) The mortuary should be detached from the main circulation with a post-mortem room (C) Casualty unit should be provided a separate entrance (D) All the above

Description : Pick up the consideration to the taken while designing a hospital from the following: (A) The operation theatre unit to be detached as it requires sterilized zone but near the ward for the patients ... post-mortem room (C) Casualty unit should be provided a separate entrance (D) All the above

Last Answer : Answer: Option D

A type rating is applicable to: a. An aircraft requiring a Certificate of Airworthiness b. An aircraft with a Certificate of Airworthiness issued by the State c. An aircraft that requires multi-pilot operation d. An aircraft that requires additional skills training

Description : A type rating is applicable to: a. An aircraft requiring a Certificate of Airworthiness b. An aircraft with a Certificate of Airworthiness issued by the State c. An aircraft that requires multi-pilot operation d. An aircraft that requires additional skills training

Last Answer : c. An aircraft that requires multi-pilot operation

A type rating is applicable to: a. An aircraft requiring a Certificate of Airworthiness b. An aircraft with a Certificate of Airworthiness issued by the State c. An aircraft that requires multi-pilot operation d. An aircraft that requires additional skills training

Description : A type rating is applicable to: a. An aircraft requiring a Certificate of Airworthiness b. An aircraft with a Certificate of Airworthiness issued by the State c. An aircraft that requires multi-pilot operation d. An aircraft that requires additional skills training

Last Answer : c. An aircraft that requires multi-pilot operation

An adult patient with a history of bacterial endocarditis requires prophylactic administration of antibiotics prior to removal of teeth. Indicate the pre-operative regimen:** A. Amoxicillin 2 gram one hour before operation orally B. Penicillin 250 mg orally six hours before operation C. Tetracycline 250-500 mg orally 2 hours before treatment

Description : An adult patient with a history of bacterial endocarditis requires prophylactic administration of antibiotics prior to removal of teeth. Indicate the pre-operative regimen:** A. Amoxicillin 2 gram ... orally six hours before operation C. Tetracycline 250-500 mg orally 2 hours before treatment

Last Answer : A. Amoxicillin 2 gram one hour before operation orally

The operation of a transistor requires ______ (a) Emitter is heated (b) base is heated (c) collector be heated (d) none of above

Description : The operation of a transistor requires ______ (a) Emitter is heated (b) base is heated (c) collector be heated (d) none of above

Last Answer : (d) none of above

Farming operation which requires maximum energy a.) Sowing b.) Interculture c.) Tillage d.) Harvesting

Description : Farming operation which requires maximum energy a.) Sowing b.) Interculture c.) Tillage d.) Harvesting

Last Answer : c.) Tillage

A dynamic RAM has refresh cycle of 32 times per msec. Each refresh operation requires 100 nsec and a memory cycle requires 250 nsec. What percentage of memory’s total operating time is required for refreshes? (A) 0.64 (B) 0.96 (C) 2.00 (D) 0.32

Description : A dynamic RAM has refresh cycle of 32 times per msec. Each refresh operation requires 100 nsec and a memory cycle requires 250 nsec. What percentage of memory’s total operating time is required for refreshes? (A) 0.64 (B) 0.96 (C) 2.00 (D) 0.32

Last Answer : Answer: D Explanation: in 1ms : refresh = 32 times Memory cycle = 1ms/250ns = 106ns/250ns = 4000 times Therefore, % of refresh time = (32 x 100ns)/(4000 x 250ns) = 3200ns/1000000 x 100% = 0.32%

"NASA launches dual satellite moon mission" "The $500-million pair of washing-machine-sized satellites will take almost four months to reach the moon." Why are satellites that expensive/costly?

Description : "NASA launches dual satellite moon mission" "The $500-million pair of washing-machine-sized satellites will take almost four months to reach the moon." Why are satellites that expensive/costly?

Last Answer : answer:Well, part of the cost would be the launch itself $25k/kg 1 (granted that's dated) and the time it's taken to get here (since 2006) 2. Both probably have a lot to do with ... impact survivability, etc all have to be tested and retested and sometimes redesigned which of course all costs $$$.

Is it possible to install two dual output PCI graphics cards for four total displays?

Description : Is it possible to install two dual output PCI graphics cards for four total displays?

Last Answer : Yes. If you can find one then you should be able to install a second PCI graphics card to the run the extra monitors.

Give any four points of comparison between dual trace CRO & dual beam CRO.

Description : Give any four points of comparison between dual trace CRO & dual beam CRO.

Last Answer : Sr.N o Single Beam Dual Trace CRO Dual Beam Dual Trace CRO 1 A single electron beam is used to display two traces.  Two electron beams are used for displaying two traces/signals. ... two traces is very simple in Dual Beam oscilloscope. 6 Cost is less  Cost is high

List four controls on front panel of dual trace CRO.

Description : List four controls on front panel of dual trace CRO. 

Last Answer : (i)X-shift on CRO: Controls the horizontal position of the display i.e moves the spot across the screen left and right. ii) CT MODE Button on CRO: To test different components iii) Symmetry knob on ... Button on CRO: In DUAL, operates as a DUAL trace scope in ALT or CHOP mode as selected.

A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Description : A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Last Answer : a.9.24,9.24

Is it normal for an ER PAs and attending to tell my husband "I don't know and there's nothing we can do" when he asked what was wrong with me and what they could do to help me bc I have an excruciating pain in the lower left quadrant of my back. 2 X-rays of spine and 1-2mg of Roxi no answers?

Description : Is it normal for an ER PAs and attending to tell my husband "I don't know and there's nothing we can do" when he asked what was wrong with me and what they could do to help me bc I have an excruciating pain in the lower left quadrant of my back. 2 X-rays of spine and 1-2mg of Roxi no answers?

Last Answer : Yes it is. The ER isn't for diagnosis, it is for stabilization.

Name the quadrant in which the point lies : -Maths 9th

Description : Name the quadrant in which the point lies : -Maths 9th

Last Answer : (a) A (1, 1) lies in the 1st quadrant, (b) B (2, 4) lies in the 1st quadrant. (c) C (-3, -10) lies in the 3rd quadrant. (d) D (-1, 2) lies in the 2nd quadrant. (e) E (1 , -1) lies in the ... lies in the 3rd quadrant. (g) G (-3, 10) lies in the 2nd quadrant. (h) H (1, -2) lies in the 4th quadrant.

Signs of the abscissa and ordinate of a point in the second quadrant are respectively. -Maths 9th

Description : Signs of the abscissa and ordinate of a point in the second quadrant are respectively. -Maths 9th

Last Answer : (C) In second quadrant, X-axis is negative and Y-axis is positive. So, sign of abscissa of a point is negative and sign of ordinate of a point is positive.

If P(-l, 1), Q(3, -4), R(1, -1), S(-2, -3) and T(-4, 4) are plotted on the graph paper, then the point(s) in the fourth quadrant is/are -Maths 9th

Description : If P(-l, 1), Q(3, -4), R(1, -1), S(-2, -3) and T(-4, 4) are plotted on the graph paper, then the point(s) in the fourth quadrant is/are -Maths 9th

Last Answer : (b) In point P (-1, 1), x-coordinate is -1 unit and y-coordinate is 1 unit, so it lies in llnd quadrant. Similarly, we can plot all the points Q (3, -4), R (1, -1), S (-2, -3) and T (-4, 4), It is clear from the graph that points R and Q lie in fourth quadrant.

Without plotting the points indicate the quadrant in which they will lie, if -Maths 9th

Description : Without plotting the points indicate the quadrant in which they will lie, if -Maths 9th

Last Answer : (i) The given point is (- 3, 5). Here, abscissa is negative and ordinate is positive, so it lies in II quadrant. (ii) The given point is (-5, - 3). Here, abscissa and ordinate both are negative ... ) The given point is (3, 5). Here, abscissa and ordinate both are positive, so it lies in I quadrant.

In which quadrant or on which axis each of the following points lie ? -Maths 9th

Description : In which quadrant or on which axis each of the following points lie ? -Maths 9th

Last Answer : (i) In point (-3, 5), x-coordinate is negative and y-coordinate is positive, so it lies in II quadrant. (ii) In point (4,-1), x-coordinate is positive and y-coordinate is negative, so it lies in ... v) In point (-3, - 6), x-coordinate and y-coordinate both are negative, so it lies in III quadrant.

Name the quadrant in which the point lies : -Maths 9th

Description : Name the quadrant in which the point lies : -Maths 9th

Last Answer : (a) A (1, 1) lies in the 1st quadrant, (b) B (2, 4) lies in the 1st quadrant. (c) C (-3, -10) lies in the 3rd quadrant. (d) D (-1, 2) lies in the 2nd quadrant. (e) E (1 , -1) lies in the ... lies in the 3rd quadrant. (g) G (-3, 10) lies in the 2nd quadrant. (h) H (1, -2) lies in the 4th quadrant.

Signs of the abscissa and ordinate of a point in the second quadrant are respectively. -Maths 9th

Description : Signs of the abscissa and ordinate of a point in the second quadrant are respectively. -Maths 9th

Last Answer : (C) In second quadrant, X-axis is negative and Y-axis is positive. So, sign of abscissa of a point is negative and sign of ordinate of a point is positive.

If P(-l, 1), Q(3, -4), R(1, -1), S(-2, -3) and T(-4, 4) are plotted on the graph paper, then the point(s) in the fourth quadrant is/are -Maths 9th

Description : If P(-l, 1), Q(3, -4), R(1, -1), S(-2, -3) and T(-4, 4) are plotted on the graph paper, then the point(s) in the fourth quadrant is/are -Maths 9th

Last Answer : (b) In point P (-1, 1), x-coordinate is -1 unit and y-coordinate is 1 unit, so it lies in llnd quadrant. Similarly, we can plot all the points Q (3, -4), R (1, -1), S (-2, -3) and T (-4, 4), It is clear from the graph that points R and Q lie in fourth quadrant.

Without plotting the points indicate the quadrant in which they will lie, if -Maths 9th

Description : Without plotting the points indicate the quadrant in which they will lie, if -Maths 9th

Last Answer : (i) The given point is (- 3, 5). Here, abscissa is negative and ordinate is positive, so it lies in II quadrant. (ii) The given point is (-5, - 3). Here, abscissa and ordinate both are negative ... ) The given point is (3, 5). Here, abscissa and ordinate both are positive, so it lies in I quadrant.

In which quadrant or on which axis each of the following points lie ? -Maths 9th

Description : In which quadrant or on which axis each of the following points lie ? -Maths 9th

Last Answer : (i) In point (-3, 5), x-coordinate is negative and y-coordinate is positive, so it lies in II quadrant. (ii) In point (4,-1), x-coordinate is positive and y-coordinate is negative, so it lies in ... v) In point (-3, - 6), x-coordinate and y-coordinate both are negative, so it lies in III quadrant.

Find the equation of the circle which touches the both axes in first quadrant and whose radius is a. -Maths 9th

Description : Find the equation of the circle which touches the both axes in first quadrant and whose radius is a. -Maths 9th

Last Answer : circle of radius a touches both axis in 1st quadrant so its centre will be (a,a). ∴ Required equation ⇒(x−a)2+(y−a)2=a2 ⇒x2+a2−2ax+y2+a2−2ay=a2 ⇒x2+y2−2ax−2ay+2a2−a2=0 ⇒x2−y2−2ax−2ay+a2=0.

Find the equation of the circle which touches the both axes in first quadrant and whose radius is a. -Maths 9th

Description : Find the equation of the circle which touches the both axes in first quadrant and whose radius is a. -Maths 9th

Last Answer : Given that the circle of radius ‘a’ touches both axis. So, its centre is (a, a) So, the equation of required circles is : (x-a)2 + (y-a)2 = a2 ⇒ x2 - 2ax + a2+y2 - 2ay + a2 = a2 ⇒ x2 + y2 - 2ax - 2ay + a2 = 0